623-509-22 [MARL]
Minimum line quantity 20 Panel sealing meets and exceeds IP67 rating; 最小线数量20面板密封达到并超过IP67等级
| 型号： | 623-509-22 |
| 厂家： | 
MARL INTERNATIONAL LIMITED |
| 描述： | Minimum line quantity 20 Panel sealing meets and exceeds IP67 rating |
| 文件： | 总4页 (文件大小：326K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
623 series
features
• Minimum line quantity 20
• Panel sealing meets and exceeds IP67 rating
• Excellent wide viewing angle
• Black anodised aluminium housing
• Suitable for high vibration applications
specifications
Typical characteristics (Ta = 25°C)
Current Luminous
Wave
Length
(nm)
Operating
Temp.
(°C)
Storage
Temp.
(°C)
Part
Voltage
Vac/dc
De-rating
Graphs
Colour
Number
DC
Intensity
(mcd)
(mA)
623-503-22
623-503-23
623-509-22
623-512-22
623-512-23
Red
Red
24 Vdc
28 Vdc
24 Vdc
24 Vdc
28 Vdc
20
20
20
20
20
80
80
45
45
45
625
625
590
565
565
-40 - +85
-40 - +85
-40 - +85
-40 - +85
-40 - +85
-40 - +85
-40 - +85
-40 - +85
-40 - +85
-40 - +85
B
B
B
C
C
Yellow
Green
Green
- Products must be de-rated according to the de-rating information. Each de-rating graph refers to
specific LEDs. Please refer to graphs on page 3.
- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
to order
to order please contact us on: t: +44 (0)1229 582 430
f: +44 (0)1229 585 155 e: sales@marl.co.uk w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the
intention of providing information, which must not be copied or released to a third party without prior
written consent from marl international limited. the information provided does not constitute part of any
order or contract and should not be regarded as a representation relating to either products or service. no
responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right
BS EN ISO 9001:2008
to alter without notice the specification or any conditions of supply for product or service.
approved manufacturer
marl international limited - dsn 623 - version 2012-12-06-113930
page 1 of 4
623 series
technical data
10.1
21
10
8.7 +0.1
0
MOUNTING HOLE
Anode termination indicated by long pin.
Mounting hole to be clean and burr free.
Dimensions in mm (typical)
Not to scale
Anode termination denoted by red indicator
Mounting hole to be clean and burr free
housing material
push on connectors
Black Anodised Aluminium
Body
Black Anodised Aluminium
Nut
Viton
Polycarbonate
Epoxy
Spring Steel
-
-
Panel Seal
Fresnel Lens
Encapsulation
Lock Washer
Termination
Header
Dimensions in mm (typical). Not to scale.
technical characteristics
Max. Power
Series
Dissipation
Max. Reverse
Nut Mounting
Torque
Min. Mounting
Centres
Max. Panel
Thickness
Panel Cutout
Voltage
623
825
1000
10.2
0.7
17.5
1.5-9.0
units
mW
Vdc
mm
Nm
mm
mm
* = Current Version
^ = Voltage Version
to order
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155
e: sales@marl.co.uk w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to
a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 623 - version 2012-12-06-113930
page 2 of 4
623 series
de-rating information
Derating Graph B
Derating Graph C
55
55
50
45
40
35
30
25
20
15
10
5
50
45
40
35
30
25
20
15
10
8
5
0
0
0.0
20.0
40.0
60.0
80.0 100.0
0.0
20.0
40.0
60.0
80.0 100.0
Ambient Temperature Ta (°C)
Ambient Temperature Ta (°C)
also available
Part numbers also available in the 623 series:
Part
Voltage
Vopr
Colour
Number
623-503-22-07
623-503-22-50
623-503-23-50
623-503-67
623-509-22-07
623-525-22-50
623-997-22-50
Red
Red
Red
24 Vdc
24 Vdc
28 Vdc
Red
18 Vac 50 Hz
24 Vdc
Yellow
Green
White
The products listed here illustrate all of
the options available to order. These
products may have custom modifications
that alter their operation beyond the
generic information contained within this
datasheet. Please contact sales for
further information.
24 Vdc
24 Vdc
* = These products do not contain
integral resistors
to order
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155
e: sales@marl.co.uk w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to
a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 623 - version 2012-12-06-113930
page 3 of 4
623 series
Electro-Static Discharge (ESD)
design considerations
Build up of electro-static discharge occurs in many situations involving people moving and handling products. The range of
possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual
situations. When an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood
that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and
assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing
technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have
changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and
despatch. Marl recommend all users of LED based products follow the guidelines of BS 100015.
Power De-Rating
The forward voltage/ current value of an LED is dependant upon the ambient temperature of the environment in which it is
operated. Therefore, care must be taken to operate the LED at the correct voltage/ current values, depending upon the
ambient temperature. Consequently, a recommendation regarding operating voltages and currents is given in order to address
these temperature effects. This recommendation is termed ‘de-rating’. It is usual for forward voltages and currents to be
specified for ambient temperature of 25°C. However, because the values of these qualities vary with temperature, please refer
to the de-rating graphs for correct operation. Marl accept no liability for any product that is operated higher than the stated
voltage.
to order
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155
e: sales@marl.co.uk w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to
a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 623 - version 2012-12-06-113930
page 4 of 4
相关型号：
©2020 ICPDF网 联系我们和版权申明