651-102-24 [MARL]

Ø12.7mm mounting Black anodised aluminium housing; 谩? 12.7毫米安装黑色阳极氧化铝外壳
651-102-24
型号: 651-102-24
厂家: MARL INTERNATIONAL LIMITED    MARL INTERNATIONAL LIMITED
描述:

Ø12.7mm mounting Black anodised aluminium housing
谩? 12.7毫米安装黑色阳极氧化铝外壳

文件: 总5页 (文件大小:430K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
651 series  
features  
• Ø12.7mm mounting  
• Black anodised aluminium housing  
• Colour diffused lens with a wide viewing angle  
• Sealed to IP67  
• Suitable for high vibration applications  
• Internal reverse protection diode fitted as standard in all  
voltage models  
• Pack Quantity = 10 Pieces  
specifications  
Typical characteristics (Ta = 25°C)  
Current Luminous  
Wave  
Length  
(nm)  
Operating  
Temp.  
(°C)  
Storage  
Temp.  
(°C)  
Part  
Voltage  
Vac/dc  
De-rating  
Graphs  
Colour  
Number  
DC  
Intensity  
(mcd)  
(mA)  
651-105-21  
651-111-21  
651-114-21  
651-105-23  
651-111-23  
651-102-21  
Red  
Yellow  
Green  
Red  
12 Vdc  
12 Vdc  
20  
20  
20  
20  
20  
19  
95  
45  
625  
590  
565  
625  
590  
660  
-40 - +85  
-40 - +85  
-40 - +85  
-40 - +85  
-40 - +85  
-40 - +85  
-40 - +85  
-40 - +85  
-40 - +85  
-40 - +85  
-40 - +85  
-40 - +85  
B
B
C
B
B
B
12 Vdc  
45  
24-28 Vdc  
24-28 Vdc  
12 Vdc  
95  
Yellow  
Red  
45  
500  
- Products must be de-rated according to the de-rating information. Each de-rating graph refers to  
specific LEDs. Please refer to graphs on page 3.  
- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.  
to order  
to order please contact us on: t: +44 (0)1229 582 430  
f: +44 (0)1229 585 155 e: sales@marl.co.uk w: www.leds.co.uk  
© marl international limited technical documentation has been designed by marl international limited for the  
intention of providing information, which must not be copied or released to a third party without prior  
written consent from marl international limited. the information provided does not constitute part of any  
order or contract and should not be regarded as a representation relating to either products or service. no  
responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right  
BS EN ISO 9001:2008  
to alter without notice the specification or any conditions of supply for product or service.  
approved manufacturer  
marl international limited - dsn 651 - version 2012-12-06-113936  
page 1 of 5  
651 series  
technical data  
+0.1  
0
12.7  
11.5  
21  
6
Mounting Hole  
Dimensions in mm (typical)  
Anode termination denoted by red indicator  
Mounting hole to be clean and burr free  
Not to scale  
housing material  
push on connectors  
Black Anodised Aluminium  
Body  
Bright Nickel Plated Brass  
Nut  
Viton  
Epoxy  
PC5430 Resin  
Spring Steel  
-
-
Panel Seal  
Fresnel Lens  
Encapsulation  
Lock Washer  
Termination  
Header  
925-000-00 should be used with the 651  
series lamp and in brass tin plated  
Dimensions in mm (typical). Not to scale.  
technical characteristics  
Max. Power  
Series  
Dissipation  
Max. Reverse  
Nut Mounting  
Torque  
Min. Mounting  
Centres  
Max. Panel  
Thickness  
Panel Cutout  
Voltage  
3*/1000^  
Vdc  
651  
1000  
12.7  
1.0  
19.5  
1.5 - 8.0  
units  
mW  
mm  
Nm  
mm  
mm  
* = Current Version  
^ = Voltage Version  
optional flying lead terminations  
Order Code  
Suffix  
Supply  
Voltage  
Wire  
Wire  
No/Diameter  
of Conductor  
Diameter  
Insulation  
Comments  
Colour  
Length  
Customised  
lengths  
19  
DC products  
Red-anode/ Black-cathode  
1000mm  
19/0.15mm  
1.2mm  
available  
to order  
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155  
e: sales@marl.co.uk w: www.leds.co.uk  
© marl international limited technical documentation has been designed by marl international limited for the intention of  
providing information, which must not be copied or released to  
a third party without prior written consent from marl  
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a  
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl  
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.  
BS EN ISO 9001:2008  
approved manufacturer  
marl international limited - dsn 651 - version 2012-12-06-113936  
page 2 of 5  
651 series  
de-rating information  
Derating Graph B  
Derating Graph C  
55  
55  
50  
45  
40  
35  
30  
25  
20  
15  
10  
5
50  
45  
40  
35  
30  
25  
20  
15  
10  
8
5
0
0
0.0  
20.0  
40.0  
60.0  
80.0 100.0  
0.0  
20.0  
40.0  
60.0  
80.0 100.0  
Ambient Temperature Ta (°C)  
Ambient Temperature Ta (°C)  
also available  
Part numbers also available in the 651 series:  
Part  
Voltage  
Vopr  
Part  
Voltage  
Vopr  
Part  
Voltage  
Vopr  
Colour  
Colour  
Colour  
Number  
Number  
Number  
651-102-04  
651-102-20  
651-102-22  
651-102-22-07  
651-102-22-08  
651-102-23  
651-102-24  
651-102-75  
651-102-76  
651-102-76-08  
651-102-76-15  
651-105-04  
651-105-20  
651-105-22  
Red  
Red  
Red  
Red  
Red  
Red  
Red  
Red  
Red  
Red  
Red  
Red  
Red  
Red  
Red  
Red  
20 mA dc  
5/6 Vdc  
24 Vdc  
24 Vdc  
24 Vdc  
651-105-23-15  
651-105-24  
651-105-75  
651-105-75-07  
651-105-75-08  
651-105-76  
651-105-76-08  
651-111-04  
651-111-20  
651-111-22  
651-111-22-08  
651-111-48  
651-111-75  
651-111-76  
651-114-04  
651-114-20  
Red  
Red  
Red  
Red  
Red  
28 Vdc  
48 Vdc  
651-114-22  
651-114-22-08  
651-114-23  
Green  
Green  
Green  
Green  
24 Vdc  
24 Vdc  
28 Vdc  
110 Vac 50 Hz  
110 Vac 50 Hz  
110 Vac 50 Hz  
230 Vac 50 Hz  
230 Vac 50 Hz  
20 mA dc  
651-114-75  
110 Vac 50 Hz  
The products listed here illustrate all of  
the options available to order. These  
products may have custom modifications  
that alter their operation beyond the  
generic information contained within this  
datasheet. Please contact sales for  
further information.  
28 Vdc  
48 Vdc  
Red  
Red  
110 Vac 50 Hz  
230 Vac 50 Hz  
230 Vac 50 Hz  
230 Vac 50 Hz  
20 mA dc  
5/6 Vdc  
Yellow  
Yellow  
Yellow  
Yellow  
Yellow  
Yellow  
Yellow  
Green  
Green  
5/6 Vdc  
24 Vdc  
24 Vdc  
60 Vdc  
110 Vac 50 Hz  
230 Vac 50 Hz  
20 mA dc  
24 Vdc  
24 Vdc  
24 Vdc  
* = These products do not contain  
integral resistors  
651-105-22-08  
651-105-22-15  
5/6 Vdc  
to order  
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155  
e: sales@marl.co.uk w: www.leds.co.uk  
© marl international limited technical documentation has been designed by marl international limited for the intention of  
providing information, which must not be copied or released to  
a third party without prior written consent from marl  
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a  
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl  
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.  
BS EN ISO 9001:2008  
approved manufacturer  
marl international limited - dsn 651 - version 2012-12-06-113936  
page 3 of 5  
651 series  
also available continued  
Part  
Voltage  
Vopr  
Colour  
Number  
651-114-75-08  
651-114-75-15  
651-114-76  
651-114-76-08  
651-135-22  
Green  
Green  
Green  
Green  
Red/Green  
110 Vac 50 Hz  
110 Vac 50 Hz  
230 Vac 50 Hz  
230 Vac 50 Hz  
24 Vdc  
to order  
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155  
e: sales@marl.co.uk w: www.leds.co.uk  
© marl international limited technical documentation has been designed by marl international limited for the intention of  
providing information, which must not be copied or released to  
a third party without prior written consent from marl  
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a  
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl  
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.  
BS EN ISO 9001:2008  
approved manufacturer  
marl international limited - dsn 651 - version 2012-12-06-113936  
page 4 of 5  
651 series  
Electro-Static Discharge (ESD)  
design considerations  
Build up of electro-static discharge occurs in many situations involving people moving and handling products. The range of  
possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual  
situations. When an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood  
that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and  
assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing  
technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have  
changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and  
despatch. Marl recommend all users of LED based products follow the guidelines of BS 100015.  
Power De-Rating  
The forward voltage/ current value of an LED is dependant upon the ambient temperature of the environment in which it is  
operated. Therefore, care must be taken to operate the LED at the correct voltage/ current values, depending upon the  
ambient temperature. Consequently, a recommendation regarding operating voltages and currents is given in order to address  
these temperature effects. This recommendation is termed ‘de-rating’. It is usual for forward voltages and currents to be  
specified for ambient temperature of 25°C. However, because the values of these qualities vary with temperature, please refer  
to the de-rating graphs for correct operation. Marl accept no liability for any product that is operated higher than the stated  
voltage.  
to order  
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155  
e: sales@marl.co.uk w: www.leds.co.uk  
© marl international limited technical documentation has been designed by marl international limited for the intention of  
providing information, which must not be copied or released to  
a third party without prior written consent from marl  
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a  
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl  
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.  
BS EN ISO 9001:2008  
approved manufacturer  
marl international limited - dsn 651 - version 2012-12-06-113936  
page 5 of 5  

相关型号:

651-102-24-29

Single Color LED, Red, Diffused, 10mm
MARL

651-102-75

Ø12.7mm mounting Black anodised aluminium housing
MARL

651-102-76

Ø12.7mm mounting Black anodised aluminium housing
MARL

651-102-76-08

Ø12.7mm mounting Black anodised aluminium housing
MARL

651-102-76-15

Ø12.7mm mounting Black anodised aluminium housing
MARL

651-105-04

Ø12.7mm mounting Black anodised aluminium housing
MARL

651-105-04-08

Single Color LED, Red, 10mm
MARL

651-105-04-11

Single Color LED, Red, 10mm
MARL

651-105-04-12

Single Color LED, Red, 10mm
MARL

651-105-04-15

Single Color LED, Red, 10mm
MARL

651-105-04-15-07-29

Single Color LED, Red, Diffused, 10mm
MARL

651-105-04-15-08-29

Single Color LED, Red, Diffused, 10mm
MARL