672-290-22 [MARL]
PROFESSIONAL LED INDICATORS Ø25.4mm Mounting; 专业LED指示灯Ø25.4mm安装型号: | 672-290-22 |
厂家: | MARL INTERNATIONAL LIMITED |
描述: | PROFESSIONAL LED INDICATORS Ø25.4mm Mounting |
文件: | 总2页 (文件大小:248K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PROFESSIONAL LED INDICATORS Ø25.4mm Mounting
FEATURES
l
l
l
l
Black anodised aluminium housing
RIA 12 approved versions available
Sealed to IP67
672 SERIES
PACK QUANTITY = 1 PIECE
Internal reverse protection diode fitted as standard in all
voltage models.
l
l
Large LED indication
AC Version available upon request
SPECIFICATION
Ordering Information & Typical Technical Characteristics (Ta = 25°C)
Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
PART NUMBER
COLOUR
LENS
VOLTAGE CURRENT
DC (mA)
lopr
LUMINOUS WAVE
INTENSITY LENGTH
lv@20mA (mcd) λp (nm)
OPERATING
TEMP
Topr
STORAGE
TEMP
Tstg
DC (Vdc)
Vopr
STANDARD INTENSITY
672-290-22
672-291-22
672-292-22
672-290-75
672-291-75
672-292-75
Red
Colour Diffused 24
Colour Diffused 24
Colour Diffused 24
19
19
19
30
625
590
565
625
590
565
-40 ~ +85^
-40 ~ +85^
-40 ~ +85^
-40 ~ +85^
-40 ~ +85^
-40 ~ +85^
-40 ~ +85
-40 ~ +85
-40 ~ +85
-40 ~ +85
-40 ~ +85
-40 ~ +85
Yes
Yes
Yes
Yes
Yes
Yes
Yellow
Green
Red
20
200
Colour Diffused 110vac/dc 19
Colour Diffused 110vac/dc 19
Colour Diffused 110vac/dc 10
30
Yellow
Green
20
200
HIGH INTENSITY
672-289-22
672-293-22
672-294-22
672-295-22
672-289-75
672-293-75
672-294-75
672-295-75
UNITS
Red
Colour Diffused 24
Colour Diffused 24
Colour Diffused 24
Colour Diffused 24
19
400
820
19
660
590
468
-40 ~ +85^
-40 ~ +85^
-40 ~ +85^
-40 ~ +85
-40 ~ +85
-40 ~ +85
-40 ~ +85
-40 ~ +85
-40 ~ +85
-40 ~ +85
-40 ~ +85
°C
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yellow
Blue
19
19
19
Cool White
Red
890
400
820
19
see below -40 ~ +85^
Colour Diffused 110vac/dc 10
Colour Diffused 110vac/dc 10
Colour Diffused 110vac/dc 10
Colour Diffused 110vac/dc 10
660
590
468
-40 ~ +85^
-40 ~ +85^
-40 ~ +85^
Yellow
Blue
Cool White
890
mcd
see below -40 ~ +85^
nm °C
Vdc
mA
Other voltages AC/DC available. Please contact our Technical Sales.
^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers
shown - Refer to page 2. The -75 products will operate at 110Vac or 110DC.
Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a
batch.
295 *Typical emission colour cool white
x
y
0.248 0.391
0.286 0.436
0.380 0.280
0.381 0.284
How to Order:
website: www.marl.co.uk email: sales@marl.co.uk
•
Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155
•
•
•
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
Page 1 of 2
© MARL INTERNATIONAL LTD 2007 : DS 049/06 Issue 2
SAMPLES AVAILABLE
672 Series
Mounting Hole
Dimensions in mm (Typical)
Not to scale
Anode termination indicated by colour dot.
Mounting hole to be clean and burr free.
MATERIALS
PUSH-ON CONNECTORS
Body
Black Anodised Aluminium
Aluminium
Nut
Panel Seal
Termination Tags
Lens
Neoprene
Tin Plated Brass
Epoxy
926-000-00 is brass tin plated,
vinyl insulation.
For use with 672 series lamps.
Encapsulation
Lock Washer
PC5430 resin
Spring Washer
Dimensions in mm (Typical)
Not to scale
TECHNICAL CHARACTERISTICS
SERIES
MAXIMUM
POWER
DISSIPATION
PANEL
CUTOUT
NUT MINIMUM
MOUNTING MOUNTING
MIN/MAX.
PANEL
THICKNESS
TORQUE
1.2
CENTRES
x,y = 41.0
Nm
672
2500
mW
25.4
Vdc
2.0-10.0
mm
UNITS
mm
DERATING INFORMATION
292
289, 290, 291, 293, 294 & 295
website: www.marl.co.uk email: sales@marl.co.uk
•
Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155
•
•
•
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
BS EN ISO 9001:2000
Approved Manufacturer
Page 2 of 2
© MARL INTERNATIONAL LTD 2007 : DS 049/06 Issue 2
相关型号:
©2020 ICPDF网 联系我们和版权申明