677-532-48 [MARL]
Single Color LED, Green, Smoked,;型号: | 677-532-48 |
厂家: | MARL INTERNATIONAL LIMITED |
描述: | Single Color LED, Green, Smoked, 光电 |
文件: | 总5页 (文件大小:469K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
677 RS series
features
• Ø8.1mm mounting
• Black anodised aluminium housing
• Sealed to IP67
• Wide viewing angle
• Suitable for high vibration applications
• Internal reverse protection diode fitted as standard
• Smoked lens for high on/ off contrast ratio
• Pack Quantity = 10 Pieces
specifications
Typical characteristics (Ta = 25°C)
Current Luminous
Wave
Length
(nm)
Operating
Temp.
(°C)
Storage
Temp.
(°C)
RS Part
Number
Marl Part
Number
Voltage
Vac/dc
De-rating
Graphs
Colour
DC
Intensity
(mcd)
(mA)
2349363
2349420
2349486
2349543
2349593
2349379
2349436
2349492
2349559
2349391
2349458
2349515
2349565
2349616
2349521
2349571
2349537
2349587
677-501-04
677-501-20
677-501-21
677-501-22
677-501-23
677-521-04
677-521-20
677-521-21
677-521-22
677-532-04
677-532-20
677-532-21
677-532-22
677-532-23
677-930-21
677-930-22
677-997-21
677-997-22
Red
Red
1.85 Vdc
5-6 Vdc
12 Vdc
24 Vdc
28 Vdc
2.25 Vdc
5-6 Vdc
12 Vdc
24 Vdc
3.2 Vdc
5-6 Vdc
12 Vdc
24 Vdc
28 Vdc
12 Vdc
24 Vdc
12 Vdc
24 Vdc
20
18
20
19
20
20
18
20
19
20
11
21
20
20
20
20
20
18
600
600
600
600
600
600
600
600
600
800
800
150
800
800
140
140
27000
27000
630
630
630
630
630
585
585
585
585
515
515
565
515
515
465
465
-40 - +80
-40 - +80
-40 - +80
-40 - +80
-40 - +80
-40 - +80
-40 - +80
-40 - +80
-40 - +80
-40 - +80
-40 - +80
-40 - +85
-40 - +80
-40 - +80
-30 - +85
-30 - +85
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +85
D
D
D
D
D
D
D
D
D
F
F
C
F
F
U
U
I
Red
Red
Red
Yellow
Yellow
Yellow
Yellow
Green
Green
Green
Green
Green
Blue
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
Blue
White
White
* See below -30 - +85
* See below -30 - +85
I
997F-C
*Typical emission colour White
x
y
0.31
0.32
-
-
-
-
-
-
- Intensities (lv) and colour shades of white (x, y co-ordinates) may vary between LEDs within a batch
- Products must be de-rated according to the de-rating information. Each de-rating graph refers to
specific LEDs. Please refer to graphs on page 3.
- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to
a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 677 RS - version 2013-04-22-092204
page 1 of 5
677 RS series
technical data
+0.1
0
7.5
3.2
23.8
6
Mounting Hole
Dimensions in mm (typical)
Not to scale
Anode termination denoted by red indicator
Mounting hole to be clean and burr free
housing material
push on connectors
Black Anodised Aluminium
Nickel Plated Brass
Viton
Polycarbonate
PC5430 Resin
Spring Steel
Body
Nut
Panel Seal
Fresnel Lens
Encapsulation
Lock Washer
Termination
Header
925-000-00 is brass tin plated - for use
with 677 series lamps
Dimensions in mm (typical). Not to scale.
Silver Flash Coated Brass
-
technical characteristics
Max. Power
Series
Dissipation
Max. Reverse
Nut Mounting
Torque
Min. Mounting
Centres
Max. Panel
Thickness
Panel Cutout
Voltage
3*/1000^
Vdc
677
700
8.1
0.6
14.5
1.5 - 13.0
units
mW
mm
Nm
mm
mm
* = Current Version
^ = Voltage Version
optional flying lead terminations
Order Code
Suffix
Supply
Voltage
Wire
Wire
No/Diameter
of Conductor
Diameter
Insulation
Comments
Colour
Length
Customised
lengths
19
DC products
Red-anode/ Black-cathode
1000mm
19/0.15mm
1.2mm
available
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to third party without prior written consent from marl
a
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 677 RS - version 2013-04-22-092204
page 2 of 5
677 RS series
de-rating information
Derating Graph C
Derating Graph D
Derating Graph F
55
50
45
40
35
30
25
20
15
10
5
55
50
45
40
35
30
25
20
15
10
5
55
50
45
40
35
30
25
20
15
10
5
0
0
0
0.0
20.0
40.0
60.0
80.0 100.0
0.0
20.0
40.0
60.0
80.0 100.0
0.0
20.0
40.0
60.0
80.0 100.0
Ambient Temperature Ta (°C)
Ambient Temperature Ta (°C)
Ambient Temperature Ta (°C)
Derating Graph I
Derating Graph U
55
50
45
40
35
30
25
20
15
10
5
55
50
45
40
35
30
25
20
15
10
5
8.5
8.5
0
0
0.0
20.0
40.0
60.0
80.0 100.0
0.0
20.0
40.0
60.0
80.0 100.0
Ambient Temperature Ta (°C)
Ambient Temperature Ta (°C)
also available
Part numbers also available in the 677 series:
Part
Voltage
Vopr
Part
Voltage
Part
Voltage
Colour
Vopr
Colour
Colour
Number
Number
Vopr
Number
677-501-00-50
677-501-04-51
677-501-20-53
677-501-21-15
677-501-21-19
677-501-21-53
677-501-23-15
677-501-23-19
677-501-23-53
677-501-24
Red
Red
Red
Red
Red
Red
Red
Red
Red
Red
Red
Red
Red
Red
Red
Red
-
677-501-86-15
677-503-21
677-503-23
677-506-21
677-512-04
677-512-21
677-512-23
677-512-86
677-521-04-50
677-521-21-15
677-521-21-19
677-521-21-53
677-521-22-50
677-521-23
Red
Red
Red
115 Vac 60 Hz
12 Vdc
677-521-23-53
677-521-24
677-523-22
677-523-23
Yellow
Yellow
Red
28 Vdc
48 Vdc
24 Vdc
28 Vdc
20 mA dc
5/6 Vdc
12 Vdc
12 Vdc
12 Vdc
28 Vdc
28 Vdc
28 Vdc
48 Vdc
35 Vdc
60 Vdc
110 Vac 50 Hz
110 Vac 50 Hz
230 Vac 50 Hz
115 Vac 60 Hz
28 Vdc
12 Vdc
20 mA dc
12 Vdc
28 Vdc
115 Vac 60 Hz
20 mA dc
12 Vdc
Orange
Green
Green
Green
Green
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Red
The products listed here illustrate all of
the options available to order. These
products may have custom modifications
that alter their operation beyond the
generic information contained within this
datasheet. Please contact sales for
further information.
677-501-46
12 Vdc
12 Vdc
24 Vdc
28 Vdc
28 Vdc
28 Vdc
677-501-48-50
677-501-75-15
677-501-75-50
677-501-76-50
677-501-86
* = These products do not contain
integral resistors
677-521-23-15
677-521-23-19
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to third party without prior written consent from marl
a
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 677 RS - version 2013-04-22-092204
page 3 of 5
677 RS series
also available continued
Part
Voltage
Vopr
Colour
Number
677-524-21
677-524-22
677-525-22
Yellow
Yellow
Green
Green
Red/Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Red/Green
Red
12 Vdc
24 Vdc
24 Vdc
28 Vdc
28 Vdc
677-525-23
677-530-23-50
677-532-00-50
677-532-00-51
677-532-00-52
677-532-20-19
677-532-21-15
677-532-21-19
677-532-21-53
677-532-22-50
677-532-23-05
677-532-23-15
677-532-23-19
677-532-23-50
677-532-23-53
677-532-23-54
677-532-24
100-265 Vac
-
-
5/6 Vdc
12 Vdc
12 Vdc
12 Vdc
24 Vdc
28 Vdc
28 Vdc
28 Vdc
28 Vdc
28 Vdc
28 Vdc
48 Vdc
35 Vdc
60 Vdc
60 Vdc
677-532-46
677-532-48
677-532-48-50
677-532-75-19
677-532-75-50
677-532-75-51
677-532-86
677-532-86-15
677-535-04-15
677-540-23
110 Vac 50 Hz
110 Vac 50 Hz
110 Vac 50 Hz
115 Vac 60 Hz
115 Vac 60 Hz
20 mA dc
28 Vdc
677-590-22
Red
24 Vdc
677-930-20
Blue
5/6 Vdc
677-930-21-19
677-930-21-53
677-930-23
Blue
Blue
Blue
12 Vdc
12 Vdc
28 Vdc
677-930-23-53
677-997-20
677-997-21-53
677-997-21-55
677-997-23
677-997-23-15
677-997-23-53
677-997-23-55
677-997-75-15
677-997-75-19
677-997-75-50
677-997-86
Blue
28 Vdc
5/6 Vdc
12 Vdc
12 Vdc
28 Vdc
28 Vdc
28 Vdc
28 Vdc
White
White
White
White
White
White
White
White
White
White
White
110 Vac 50 Hz
110 Vac 50 Hz
110 Vac 50 Hz
115 Vac 60 Hz
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to third party without prior written consent from marl
a
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 677 RS - version 2013-04-22-092204
page 4 of 5
677 RS series
Electro-Static Discharge (ESD)
design considerations
Build up of electro-static discharge occurs in many situations involving people moving and handling products. The range of
possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual
situations. When an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood
that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and
assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing
technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have
changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and
despatch. Marl recommend all users of LED based products follow the guidelines of BS 100015.
Power De-Rating
The forward voltage/ current value of an LED is dependant upon the ambient temperature of the environment in which it is
operated. Therefore, care must be taken to operate the LED at the correct voltage/ current values, depending upon the
ambient temperature. Consequently, a recommendation regarding operating voltages and currents is given in order to address
these temperature effects. This recommendation is termed ‘de-rating’. It is usual for forward voltages and currents to be
specified for ambient temperature of 25°C. However, because the values of these qualities vary with temperature, please refer
to the de-rating graphs for correct operation. Marl accept no liability for any product that is operated higher than the stated
voltage.
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to
a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 677 RS - version 2013-04-22-092204
page 5 of 5
相关型号:
©2020 ICPDF网 联系我们和版权申明