DS9100A [MAXIM]
Touch and Hold Probe Stampings;
| 型号： | DS9100A |
| 厂家： | 
MAXIM INTEGRATED PRODUCTS |
| 描述： | Touch and Hold Probe Stampings |
| 文件： | 总3页 (文件大小：177K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
19-4876; Rev 8/09
DS9100
Touch and Hold Probe Stampings
www.maxim-ic.com
FEATURES
. Compact two-piece, all-metal receptacle for
F5 MicroCan
DS9100A WITH DS9100B
. Accepts two-thirds of the MicroCan (one-
third of MicroCan will extend out)
. Allows reading iButtons® with either
momentary or dwelled contact
. Outer ring will hold MicroCan for dwelled
contact
. Two options for data contact: cantilever
(DS9100B) or coiled spring (DS9100C)
. >10000 insertion/withdrawal cycles with no
performance degradation
. Redundancy of contacts and high contact
force ensure reliability
. Probe withstands high temperatures required
for PCB solder reflow operations
. Material is stainless steel with selective tin-
lead plating for optimal solderability to
printed circuit board
. Cleaning fluids drain freely for quick clean up
ORDERING INFORMATION
Dimensions are in millimeters
PART
DESCRIPTION
DS9100C WITH CORRECT
ORIENTATION TO SOLDER PAD
DS9100-A+ Outer Contact (Ground)
Center Contact Cantilever
DS9100-B+
(Data)
Center Contact Coiled Spring
DS9100-C+
(Data)
+Denotes a lead(Pb)-free/RoHS-compliant package.
iButton is a registered trademark of Maxim Integrated Products, Inc.
DESCRIPTION
The DS9100 Touch and Hold Probe Stampings' function is similar to the DS9098 iButton Retainer. An
F5 MicroCan will fit completely into the DS9098, but the flange and about one-third of the can will
extend out if pressed into the DS9100. As a probe, the DS9100A together with the coiled spring
DS9100C allows reading iButtons on contact. With additional pressure, the stiff springs of the
DS9100A’s outer ring will deflect and grip the MicroCan sufficiently to provide a continuous contact to
both the can rim (ground) and the can lid (data). If reading on contact is not required, the cantilever type
center contact DS9100B can be used rather than the DS9100C.
1 of 3
DS9100
PRINTED CIRCUIT BOARD LAYOUTS
Center piece optimized for cantilever DS9100B
Compatible PCB layout.
Good for either center part DS9100B or DS9100C
Additional diminsions for ground contact.
Center piece optimized for coiled spring DS9100C
Dimensions are in millimeters.
CENTER-DATA
OUTER RING-GROUND
COPPER CLADDING0.3 kg/m2 or 34 m
(1 oz/sq. ft)
The DS9100 stampings are mounted on Side A of the
printed circuit board.
2 of 3
DS9100
REVISION HISTORY
REVISION
DATE
PAGES
CHANGED
DESCRIPTION
Updated the PART numbers in the Ordering Information table to
indicate lead(Pb)-free/RoHS-compliant packages.
8/09
1
3 of 3
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses
are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
2009 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products.
相关型号：
©2020 ICPDF网 联系我们和版权申明