MAX11810EWE+ [MAXIM]
Micro Peripheral IC;型号: | MAX11810EWE+ |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | Micro Peripheral IC |
文件: | 总3页 (文件大小:329K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
XX-XXXX; Rev 0; 7/09
Advanced Touch Interface Solution with Haptic
Controller plus Driver and Proximity Sensing
General Description
Features
S 4-Wire Resistive Touch-Screen Interface
The MAX11810/MAX11811 low-power touch interface
solutions operate from a single supply of 1.7V to 3.6V,
targeting power-sensitive applications such as handheld
equipment. The MAX11810/MAX11811 include a 4-wire
resistive touch-screen controller, a haptic motor control-
ler plus driver, and IR proximity-sensing system.
S X and Y Coordinate and Touch Pressure
Measurement
S Ratiometric Measurement
S 12-Bit SAR ADC
S Single 1.7V to 3.6V Supply
The devices contain a 12-bit SAR ADC and a multiplexer
to interface with a 4-wire resistive touch-screen panel. A
digital serial interface provides communications.
S Integrated Haptic Controller Driver for ERM and
LRA Motors
S Integrated Proximity Sensing System
The MAX11810/MAX11811 contain an advanced state
machine, which performs digital preprocessing of the
touch-screen measurements, reducing bus loading
and application-processor resource requirements. The
MAX11810/MAX11811 enter low-power modes automati-
cally between conversions to save power, making them
ideal for portable applications. Also included is a smart
interrupt generation engine, which enables servicing the
part only when needed. The register map is compatible
with that of the MAX11800/MAX11801.
S General-Purpose Current DAC Output and
General-Purpose Input
S PWM Output for Piezo Drivers
S Data Tagging Provides Measurement and Touch
Event Information
S Data Filtering Provides Noise Reduction
S Aperture Mode Provides Spatial Filtering
S Digital Preprocessing Reduces Serial Bus Activity
In addition, the MAX11810/MAX11811 have a built-in hap-
tic controller plus driver to either drive a vibration motor
directly, or to interface with an external piezo driver. The
built-in haptic waveform generator generates > 50,000
haptic patterns, which are configured through the serial
interface. This eliminates the need for a dedicated inter-
face on the applications processor/microcontroller end.
and Interrupt Generation
S Programmable Touch Detect Pullup Resistor
S Auto Power-Down Control for Ultra-Low-Power
Operation
S 25MHz SPI Interface (MAX11810)
2
S 400kHz I C Interface (MAX11811)
They also contain a general-purpose current DAC output
and voltage input. The DAC output can drive IR and vis-
ible LEDs; the input can connect to either a photo-detec-
tor for proximity sensing, or an ambient light sensor.
S 2.1mm x 2.1mm, 16-Pin WLP and 4mm x 4mm,
20-Pin TQFN Packages
S Low-Power Operation
246µW at V
698µW at V
= 1.8V, 34.4ksps
= 3.6V, 34.4ksps
DD
DD
.
Applications
Mobile Communication Devices
Ordering Information
PDA, GPS, Media Players, Portable Navigation
Devices
SERIAL
PIN-PACKAGE
PART
POS Terminals and Financial Terminals
Automotive Center Consoles
Handheld Games
INTERFACE
MAX11810ETP+*
MAX11810EWE+*
MAX11811ETP+*
MAX11811EWE+*
20 TQFN-EP**
16 WLP
SPI
SPI
2
20 TQFN-EP**
16 WLP
I C
2
I C
Note: All devices are specified over the -40°C to +85°C operating
temperature range.
+Denotes a lead(Pb)-free/RoHs-compliant package.
*Future product––contact factory for availability.
**EP = Exposed pad.
SPI is a trademark of Motorola, Inc.
_______________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
Advanced Touch Interface Solution with Haptic
Controller plus Driver and Proximity Sensing
Pin Configurations
MAX11810
MAX11811
1
2
3
4
TOP VIEW
+
A0/CSB
TIRQB
GPI
X+
+
A
B
C
D
Y+
X-
Y-
1
15 A0/CSB
14 SCL/CLK
13 SDA/DIN
12 A1/DOUT
SCL/CLK PIRQB
A1/DOUT SDA/DIN
Y+
X-
2
3
4
5
MAX11810
MAX11811
Y-
D-
V
DD
V
V
DD
DD
11
GPO
GPO
GND
D+
16 WLP
20 THIN QFN
Pin Description
PIN
NAME
FUNCTION
TQFN
1
WLP
B3
B4
C3
C4
D4
D3
D2
––
Y+
X-
Y+ Channel Input from TS
X- Channel Input from TS
Y- Channel Input from TS
2
3
Y-
4, 5
6
V
DD
Power Supply (Used as ADC reference)
Haptic Driver Positive Output
D+
D-
7
Haptic Driver Negative Output
Ground
8, 9
10, 16
11
12
13
14
15
17
18
19
20
EP
GND
N.C.
No Connection
D1
C1
C2
B1
A1
B2
A2
A3
A4
––
GPO
General-Purpose Output (IR LED Driver)
I2C Address Input Bit 1/SPI Data Output Bus
I2C Serial Data Bus/SPI Serial Data Input Bus
I2C Serial Data Clock/SPI Serial Data Clock
I2C Address Input Bit 0/Chip-Select Bar for SPI
Proximity Interrupt Output Bar
Touch Interrupt Output Bar
A1/DOUT
SDA/DIN
SCL/CLK
A0/CSB
PIRQB
TIRQB
GPI
General-Purpose Input (IR Photo-Diode Input)
X+ Channel Input from TS
X+
EP
Exposed Pad
2
______________________________________________________________________________________
Advanced Touch Interface Solution with Haptic
Controller plus Driver and Proximity Sensing
Functional Diagram
TIRQB
V
DD
INTERRUPT
CONTROL
POWER AND BIAS
PIRQB
SAR
STATE
MACHINE
ADC
CONTROL
SERIAL INTERFACE
PHYSICAL LAYER
(ANALOG SIF)
DOUT/A1
A0/CSB
INTERNAL
CLOCK
X+
X-
Y+
Y-
SCREEN
INTERFACE
MUX
SIF
PHY
SAR
ADC
SCL/CLK
SDA/DIN
GPI
IR PD
INTERFACE
MAX11810
MAX11811
DATA
REGISTERS
GPO
DAC
D+
D-
PATTERNS
MOTOR CONTROL
MOTOR DRIVER
GND
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.
Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
3
©
2009 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.
相关型号:
MAX11811
TacTouch™, Low-Power, Ultra-Small, Resistive Touch-Screen Controller with Haptic Driver
MAXIM
MAX1181ECM
Dual 10-Bit, 80Msps, 3V, Low-Power ADC with Internal Reference and Parallel Outputs
MAXIM
MAX1181ECM+
Dual 10-Bit, 80Msps, 3V, Low-Power ADC with Internal Reference and Parallel Outputs
MAXIM
MAX1181ECM+D
ADC, Flash Method, 10-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PQFP48, 7 X 7 MM, 1 MM HEIGHT, ROHS COMPLIANT, MS-026ABA-HD, TQFP-48
MAXIM
MAX1181ECM+TD
ADC, Flash Method, 10-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PQFP48, 7 X 7 MM, 1 MM HEIGHT, ROHS COMPLIANT, MS-026ABA-HD, TQFP-48
MAXIM
MAX1181ECM-D
ADC, Flash Method, 10-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PQFP48, 7 X 7 MM, 1 MM HEIGHT, MS-026ABA-HD, TQFP-48
MAXIM
MAX1181ECM-TD
ADC, Flash Method, 10-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PQFP48, 7 X 7 MM, 1 MM HEIGHT, MS-026ABA-HD, TQFP-48
MAXIM
MAX1181EVKIT
Evaluation Kit for the MAX1180/MAX1181/MAX1182/MAX1183/MAX1184/MAX1185/MAX1186/MAX1190
MAXIM
©2020 ICPDF网 联系我们和版权申明