MAX2692 [MAXIM]
WLAN/WiMAX Low-Noise Amplifiers;型号: | MAX2692 |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | WLAN/WiMAX Low-Noise Amplifiers 局域网 WLAN 无线局域网 |
文件: | 总10页 (文件大小:1796K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
19-6004; Rev 0; 9/11
E V A L U A T I O N K I T A V A I L A B L E
General Description
Features
The MAX2692/MAX2695 low-noise amplifiers (LNAs) are
designed for WLAN/WiMAX applications. Designed
in Maxim’s advanced SiGe process, the devices
achieve high gain and low noise figure while maximizing
3rd-order intercept point.
S 2.5GHz WLAN (MAX2692)
M
S 3.7GHz WiMAX (MAX2695)
S High-Power Gain: 18dB (MAX2692)
S Low Noise Figure: 1.1dB (MAX2692)
S High-Input-IP3: -3dBm (MAX2695)
The devices operate from a +1.6V to +3.6V single supply.
The optional shutdown feature in the devices reduces the
supply current to less than 10FA. The devices are avail-
able in a very small, lead-free, RoHS-compliant, 0.86mm
x 0.86mm x 0.65mm wafer-level package (WLP).
S Integrated 50Ω Output Matching Circuit
S Low Supply Current: 4.0mA
S Low Bill of Materials: One Inductor, Two
Capacitors
Applications
S Small Footprint: 0.86mm x 0.86mm
Smart Phones
Notebook PCs/Tablets
Industrial WLAN/WiMAX
Embedded Modules
Automotive
Ordering Information appears at end of data sheet.
For related parts and recommended products to use with this part,
refer to www.maxim-ic.com/MAX2692.related.
Typical Operating Circuit
MAX2692
MAX2695
RFOUT
V
CC
RF
V
CC
A1
B1
A2
B2
OUTPUT
C2
R1
25kI
SHDN
OPTIONAL SHUTDOWN
C1
L1
RFIN
RF
GND
INPUT
MAX2692
MAX2695
L1 = 4.3nH L1 = 3.3nH
C1 = 100nF C1 = 100nF
C2 = 1nF C2 = 100nF
WiMAX is a registered service mark of WiMAX Forum.
����������������������������������������������������������������� Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAX2692/MAX2695
WLAN/WiMAX Low-Noise Amplifiers
ABSOLUTE MAXIMUM RATINGS
CC
RFOUT to GND.........................-0.3V to (operating V
Maximum RF Input Power...............................................+5dBm
V
to GND..........................................................-0.3V to +3.9V
Operating Temperature Range.......................... -40°C to +85°C
Junction Temperature .....................................................+150°C
Storage Temperature Range............................ -65°C to +160°C
Soldering Temperature (reflow) ......................................+260°C
+ 0.3V)
CC
Continuous Power Dissipation (T = +70°C)
A
WLP (derates 9.7mW/°C above +70°C) ......................776mW
Maximum Current into RF Input .........................................10mA
Note 1: Refer to Application Note 1891: Wafer-Level Packaging (WLP) and its Applications.
CAUTION! ESD SENSITIVE DEVICE
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional opera-
tion of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
(MAX2692/MAX2695 EV kit, V
= 1.6V to 3.6V, T = -40NC to +85NC, no RF signals are applied. Typical values are at V = 2.85V
CC
A
CC
and T = +25NC, unless otherwise noted.) (Note 2)
A
PARAMETER
CONDITIONS
MIN
TYP
2.85
4.0
MAX
UNITS
Supply Voltage
1.6
3.6
V
MAX2692
MAX2695
= 0V
mA
SHDN = high
Supply Current
4.0
10
µA
V
Shutdown mode, V
SHDN
Digital Input Logic-High
Digital Input Logic-Low
(Note 3)
(Note 3)
1.2
0.45
V
AC ELECTRICAL CHARACTERISTICS
(MAX2692/MAX2695 EV kit, V
= 1.6V to 3.6V, T = -40NC to +85NC, MAX2692 f
= 2.45GHz, MAX2695 f
= 3.5GHz. Typical
CC
A
RFIN
RFIN
values are at V
= 2.85V and T = +25NC, unless otherwise noted.) (Note 3)
CC
A
PARAMETER
RF Frequency
CONDITIONS
MIN
TYP
MAX
UNITS
MAX2692 (WLAN)
MAX2695 (WiMax)
2.45
3.5
18.2
15.6
18
GHz
MAX2692
13.5
11.1
13.2
10.9
V
V
V
= 2.85V (Note 4)
= 1.6V
CC
CC
CC
MAX2695
MAX2692
MAX2695
MAX2692
MAX2695
MAX2692
MAX2695
MAX2692
MAX2695
Power Gain
dB
15.6
1.1
1.2
-3
Noise Figure
= 1.6V to 3.6V
dB
3rd-Order Input Intercept Point
Input 1dB Compression Point
Input Return Loss
(Note 5)
(Note 6)
dBm
dBm
dBm
-3
-16
14.5
8.5
7.5
MAX2692
MAX2695
����������������������������������������������������������������� Maxim Integrated Products
2
MAX2692/MAX2695
WLAN/WiMAX Low-Noise Amplifiers
AC ELECTRICAL CHARACTERISTICS (continued)
(MAX2692/MAX2695 EV kit, V
= 1.6V to 3.6V, T = -40NC to +85NC, MAX2692 f
= 2.45GHz, MAX2695 f
= 3.5GHz. Typical
CC
A
RFIN
RFIN
values are at V
= 2.85V and T = +25NC, unless otherwise noted.) (Note 2)
CC
A
PARAMETER
Output Return Loss
Reverse Isolation
CONDITIONS
MIN
TYP
MAX
UNITS
MAX2692
MAX2695
MAX2692
MAX2695
17
14
32
28
dB
dB
Note 2: Min and max limits guaranteed by test at T = +25°C and guaranteed by design and characterization at T = -40°C and
A
A
T
= +85°C, unless otherwise noted.
A
Note 3: Min and max limits guaranteed by test at T = +25°C.
A
Note 4: Min limit guaranteed by design and characterization.
Note 5: Measured with the two tones located at 1MHz and 2MHz offset from the center of the band with -30dBm/tone.
Note 6: Measured with a tone located at 2.45GHz for the MAX2692 and 3.5GHz for the MAX2695.
Typical Operating Characteristics
(MAX2692/MAX2695 EV kit. Typical values are at V
= 2.85V, T = +25°C, unless otherwise noted.)
A
CC
MAX2692
INPUT RETURN LOSS vs. FREQUENCY
GAIN vs. FREQUENCY
REVERSE ISOLATION vs. FREQUENCY
0
-2
20
-25
-30
-35
-40
-45
-50
18
16
14
12
10
8
-4
-6
-8
-10
-12
-14
-16
-18
-20
6
4
2
0
1500
2000
2500
3000
3500
1500
2000
2500
3000
3500
1500
2000
2500
3000
3500
FREQUENCY (MHz)
FREQUENCY (MHz)
FREQUENCY (MHz)
IN-BAND IIP3 vs. SUPPLY VOLTAGE
AND TEMPERATURE
OUTPUT RETURN LOSS vs. FREQUENCY
0
-5
0
-1
-2
-3
-4
-5
-6
+25°C
+85°C
-10
-15
-20
-25
-30
-40°C
1500
2000
2500
3000
3500
1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6
SUPPLY VOLTAGE (V)
FREQUENCY (MHz)
����������������������������������������������������������������� Maxim Integrated Products
3
MAX2692/MAX2695
WLAN/WiMAX Low-Noise Amplifiers
Typical Operating Characteristics (continued)
(MAX2692/MAX2695 EV kit. Typical values are at V
= 2.85V, T = +25°C, unless otherwise noted.)
A
CC
MAX2692
INPUT P1dB vs. SUPPLY VOLTAGE
1dB GAIN DESENSE
vs. BLOCKER FREQUENCY
AND TEMPERATURE
-10
0
-5
-10
-15
-20
-25
-30
-12
+85°C
+25°C
-14
-16
-40°C
-18
-20
1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6
SUPPLY VOLTAGE (V)
1500
2000
2500
3000
3500
BLOCKER FREQUENCY (MHz)
MAX2695
INPUT RETURN LOSS vs. FREQUENCY
GAIN vs. FREQUENCY
0
18
16
14
12
10
8
-1
-2
-3
-4
-5
-6
6
-7
4
-8
2
-9
-10
0
2500
3000
3500
4000
4500
2500
3000
3500
4000
4500
FREQUENCY (MHz)
FREQUENCY (MHz)
����������������������������������������������������������������� Maxim Integrated Products
4
MAX2692/MAX2695
WLAN/WiMAX Low-Noise Amplifiers
Typical Operating Characteristics (continued)
(MAX2692/MAX2695 EV kit. Typical values are at V
= 2.85V, T = +25°C, unless otherwise noted.)
A
CC
MAX2695
REVERSE ISOLATION vs. FREQUENCY
OUTPUT RETURN LOSS vs. FREQUENCY
IN-BAND IIP3 vs. SUPPLY VOLTAGE
AND TEMPERATURE
-25
0
0
-1
-2
-3
-4
-5
-6
-5
-10
-15
-20
-25
-30
-30
-35
-40
-45
-50
+25°C
+85°C
-40°C
2500
3000
3500
4000
4500
2500
3000
3500
4000
4500
1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6
SUPPLY VOLTAGE (V)
FREQUENCY (MHz)
FREQUENCY (MHz)
INPUT P1dB vs. SUPPLY VOLTAGE
AND TEMPERATURE
1dB GAIN DESENSE
vs. BLOCKER FREQUENCY
-10
0
-5
-12
-14
-16
-18
-20
+85°C
+25°C
-10
-15
-20
-25
-30
-40°C
1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6
SUPPLY VOLTAGE (V)
2500
3000
3500
4000
4500
BLOCKER FREQUENCY (MHz)
����������������������������������������������������������������� Maxim Integrated Products
5
MAX2692/MAX2695
WLAN/WiMAX Low-Noise Amplifiers
Bump Configuration
TOP VIEW
+
V
RFOUT(SHDN)
GND
A1
B1
A2
B2
CC
MAX2692
MAX2695
RFIN
WLP
Bump Description
BUMP
NAME
FUNCTION
Supply Voltage. Bypass to ground with a 10pF capacitor as close as possible to the IC.
RF Output/SHDN Input. RFOUT is internally matched to 50I and pulled up to V through a 25kI
A1
V
CC
CC
RFOUT
(SHDN)
A2
resistor. SHDN is shared with the RFOUT bump. The devices are in active mode by default once
is applied. RFOUT(SHDN) can be pulled to a DC low externally to shut down the IC.
V
CC
B1
B2
RFIN
GND
RF Input. Requires a DC-blocking capacitor and external matching components.
Ground. Connect to the PCB ground plane.
devices integrate an on-chip output matching to 50I at
the output, eliminating the need for external matching
components. Table 1 and Table 2 list typical device S
Detailed Description
The MAX2692/MAX2695 are LNAs designed for WLAN/
WiMax applications. The devices feature an optional
power-shutdown control mode to eliminate the need for
an external supply switch. The devices achieve high
gain, low noise figure, and excellent linearity.
parameters and K values. Typical noise parameters are
f
shown in Table 3 and Table 4.
Shutdown
The devices include an optional shutdown feature to turn
off the entire chip. The devices are placed in active mode
Input and Output Matching
The devices require an off-chip input matching. Only an
inductor in series with a DC-blocking capacitor is needed
to form the input matching circuit. The Typical Operating
Circuit shows the recommended input-matching network.
These values are optimized for the best simultaneous
gain, noise figure, and return loss performance. The
by default once V
is applied, due to the on-chip pul-
at the RFOUT bump (shared with the
CC
lup resistor to V
CC
SHDN input). To shut down the part, apply a logic-low
to the RFOUT bump through an external resistor with an
adequate value, e.g., 25kI, in order not to load the RF
output signal during active operation.
����������������������������������������������������������������� Maxim Integrated Products
6
MAX2692/MAX2695
WLAN/WiMAX Low-Noise Amplifiers
Table 1. MAX2692 Typical S Parameter Values and K-Factor
S11
PHASE
(DEGREES)
S21
PHASE
(DEGREES)
S12
PHASE
(DEGREES)
S22
PHASE
(DEGREES)
FREQ.
(MHz)
S11 MAG
(dB)
S21 MAG
(dB)
S12 MAG
(dB)
S22 MAG
(dB)
K
f
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
-1.9
-2.0
-2.1
-2.5
-2.8
-3.2
-3.6
-4.1
-4.3
-4.4
-4.3
-160.0
-168.2
-177.4
175.1
167.6
159.6
153.0
147.8
144.0
140.2
135.0
9.8
94.6
79.9
74.5
62.0
40.3
20.5
-1.4
-41.1
-39.5
-39.7
-35.6
-35.5
-34.4
-32.8
-34.4
-34.2
-36.2
-37.3
107.6
99.8
73.5
57.1
37.7
15.1
-5.3
-2.6
-3.1
-4.2
-6.3
-7.7
-10.1
-12.0
-9.8
-6.8
-4.7
-3.4
68.0
47.2
2.7
2.2
3.0
2.0
2.0
1.9
1.7
2.1
1.9
2.2
2.3
10.8
10.9
13.7
15.1
15.9
16.1
16.0
15.6
14.7
13.4
20.6
3.7
-24.3
-65.9
-130.0
164.6
120.6
89.4
-24.2
-45.1
-60.7
-77.1
-31.7
-57.8
-72.0
-83.2
65.0
Table 2. MAX2695 Typical S Parameter Values and K-Factor
S11
PHASE
(DEGREES)
S21
PHASE
(DEGREES)
S12
PHASE
(DEGREES)
S22
PHASE
(DEGREES)
FREQ.
(MHz)
S11 MAG
(dB)
S21 MAG
(dB)
S12 MAG
(dB)
S22 MAG
(dB)
K
f
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
-1.9
-1.9
-1.9
-2.1
-2.2
-2.4
-2.6
-2.6
-2.8
-3.0
-3.2
119.7
112.1
104.5
97.1
90.0
83.1
77.0
70.7
64.0
58.4
52.7
11.5
12.1
12.7
13.2
13.4
13.5
13.5
13.7
13.5
13.4
13.7
14.2
0.4
-35.9
-34.6
-34.1
-34.2
-32.7
-32.4
-33.2
-31.9
-32.1
-32.7
-31.0
42.9
32.1
21.7
1.5
-5.4
-6.9
-26.8
-46.6
-68.3
-95.9
-135.5
166.3
116.2
86.1
1.7
1.6
1.6
1.8
1.7
1.8
2.1
1.7
1.8
1.8
1.4
-15.1
-29.2
-42.8
-57.2
-72.2
-84.6
-96.0
-112.5
-123.5
-8.9
-11.7
-15.0
-16.2
-13.7
-11.1
-8.8
-2.8
-23.2
-37.1
-41.3
-57.3
-68.4
-80.0
62.7
-7.1
42.1
-6.0
23.8
Table 3. MAX2692 Typical Noise Parameters (V
= 2.85V, T = +25NC)
A
CC
FREQUENCY (MHz)
FMIN (dB)
R (I)
N
|G
|
|G
| ANGLE
OPT
OPT
2300
2350
2400
2450
2500
2550
2600
0.84
0.49
0.48
0.48
0.48
0.48
0.47
0.47
44
45
46
47
48
49
50
12.0
0.84
11.9
11.8
11.8
11.7
11.7
11.7
0.85
0.85
0.86
0.87
0.87
����������������������������������������������������������������� Maxim Integrated Products
7
MAX2692/MAX2695
WLAN/WiMAX Low-Noise Amplifiers
Table 4. MAX2695 Typical Noise Parameters (V
= 2.85V, T = +25NC)
A
CC
FREQUENCY (MHz)
FMIN (dB)
R (I)
N
|G
|
|G
| ANGLE
OPT
OPT
3400
3450
3500
3550
3600
3650
3700
1.02
0.44
0.44
0.44
0.44
0.44
0.43
0.43
65
66
67
68
69
69
70
11.3
11.2
11.2
11.1
11.1
11.0
10.9
1.03
1.03
1.04
1.04
1.05
1.06
Applications Information
Ordering Information
A properly designed PCB is essential to any RF micro-
wave circuit. Use controlled-impedance lines on all
PART
TEMP RANGE
-40NC to +85NC
-40NC to +85NC
PIN-PACKAGE
4 WLP
MAX2692EWS+T
MAX2695EWS+T
high-frequency inputs and outputs. Bypass V
with
CC
4 WLP
decoupling capacitors located close to the device. For
long V lines, it may be necessary to add decoupling
+Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
CC
capacitors. Locate these additional capacitors further
away from the device package. Proper grounding of the
GND bump is essential. If the PCB uses a topside RF
ground, connect it directly to the GND bump. For a board
where the ground is not on the component layer, connect
the GND bump to the board with multiple vias close to
the package.
Package Information
For the latest package outline information and land patterns
(footprints), go to www.maxim-ic.com/packages. Note that a
“+”, “#”, or “-” in the package code indicates RoHS status only.
Package drawings may show a different suffix character, but
the drawing pertains to the package regardless of RoHS status.
Refer to www.maxim-ic.com/datasheet/index.mvp/id/6939/t/do
for the MAX2692/MAX2695 EV kit schematic, Gerber data,
PADS layout file, and BOM information.
PACKAGE PACKAGE
OUTLINE
NO.
LAND
PATTERN NO.
TYPE
CODE
Chip Information
Refer to
Application
Note 1891
PROCESS: SiGe BiCMOS
4 WLP
W40A0+1
21-0480
����������������������������������������������������������������� Maxim Integrated Products
8
MAX2692/MAX2695
WLAN/WiMAX Low-Noise Amplifiers
Revision History
REVISION REVISION
PAGES
DESCRIPTION
CHANGED
NUMBER
DATE
0
9/11
Initial release
—
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.
Maxim reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in the Electrical
Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
9
©
2011 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.
MAX2692/MAX2695
WLAN/WiMAX Low-Noise Amplifiers
���������������������������������������������������������������� Maxim Integrated Products 10
相关型号:
MAX2692EWS+T
Wide Band Low Power Amplifier, 1 Func, BICMOS, 0.86 X 0.86 MM, 0.65 MM HEIGHT, ROHS COMPLIANT, WLP, 4 PIN
MAXIM
MAX2693LEWS+
Analog Circuit, 1 Func, BICMOS, PBGA4, 0.86 X 0.86 MM, 0.65 MM HEIGHT, 0.40 MM PITCH, ROHS COMPLIANT, WLP-4
MAXIM
MAX2695EWS+T
Wide Band Low Power Amplifier, 1 Func, BICMOS, 0.86 X 0.86 MM, 0.65 MM HEIGHT, ROHS COMPLIANT, WLP, 4 PIN
MAXIM
©2020 ICPDF网 联系我们和版权申明