MAX4495ASD+T [MAXIM]
Operational Amplifier, 4 Func, 10000uV Offset-Max, BIPolar, PDSO14, 0.150 INCH, MS-012, SOIC-14;
| 型号： | MAX4495ASD+T |
| 厂家： | 
MAXIM INTEGRATED PRODUCTS |
| 描述： | Operational Amplifier, 4 Func, 10000uV Offset-Max, BIPolar, PDSO14, 0.150 INCH, MS-012, SOIC-14 运算放大器 |
| 文件： | 总15页 (文件大小：444K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
19-1797; Rev ±; 10/08
SC70, Low-Power, General-Purpose,
Dual-Supply, Rail-to-Rail Op Amps
3/MAX495
General Description
Features
The MAX4493/MAX4494/MAX4495 single/dual/quad
general-purpose operational amplifiers are designed
for use in systems powered with dual supplies from
±±2±5ꢀ to ±525ꢀ or with a single supply of ꢁ425ꢀ to
ꢁ11ꢀ2 These op amps provide a unity-gain bandwidth
of 5MHz with only 770µA of quiescent current per
amplifier2 The wide input common-mode range extends
from ±00mꢀ beyond the negative rail to within 125ꢀ of
the positive supply rail while the output swings within
♦ 770µA Supply Current per Amplifier
♦ Operates from Dual 2.2ꢀ5 to ꢀ.ꢀ5 Supplies
♦ ꢀMHz Gain-Bandwidth Product
♦ Rail-to-Rail Output Swing
♦ Input 5oltage Range Extends 200m5 Below the
Negative Rail
♦ 110dB Open-Loop Gain (R = 100kΩ)
10mꢀ (R = 100kΩ) of either rail2
L
L
These amplifiers have excellent (110dB) open-loop
gain with very low THDꢁN of 0200±% (f = 1kHz)2 The
single MAX4493 is available in a tiny 5-pin SC70 pack-
age and the dual MAX4494 is available in the space-
saving 8-pin SOT±32 The quad MAX4495 is available in
both 14-pin TSSOP and 14-pin SO packages2 All prod-
ucts are rated at the automotive temperature range of
-40°C to ꢁ1±5°C2
♦ Low THD+N of 0.002% (f = 1kHz)
♦ No Phase Reversal for Overdriven Inputs
♦ Unity-Gain Stable
♦ Available in Space-Saving Packages
ꢀ-Pin SC70 (MAX4493)
8-Pin SOT23 (MAX4494)
14-Pin TSSOP (MAX449ꢀ)
________________________Applications
Battery-Powered Systems
DAC Output Amplifiers
Industrial Control Systems
ꢀoltage Reference Generators
Signal Conditioning
Ordering Information
TEMP
PIN-
TOP
PART
RANGE
PACKAGE
MARK
MAX4493AXK-T
MAX4493AUK-T
MAX4494AKA-T
MAX4494AUA
MAX4494ASA
MAX449ꢀAUD
MAX4495ASD
-40°C to ꢁ1±5°C 5 SC70
-40°C to ꢁ1±5°C 5 SOT±3
-40°C to ꢁ1±5°C 8 SOT±3
-40°C to ꢁ1±5°C 8 µMAX
-40°C to ꢁ1±5°C 8 SO
ABR
ADPG
AAEM
—
Typical Operating Characteristic
—
TOTAL HARMONIC DISTORTION PLUS
-40°C to ꢁ1±5°C 14 TSSOP
-40°C to ꢁ1±5°C 14 SO
—
NOISE vs. FREQUENCY
—
0.008
0.007
0.006
0.005
0.004
0.003
0.002
0.001
0
Pin Configurations
TOP VIEW
IN+
1
2
3
5
4
V
CC
MAX4493
V
EE
IN-
OUT
10
1k
100
FREQUENCY (Hz)
10k
100k
1
SC70/SOT23-ꢀ
Typical Operating Circuit appears at end of data sheet.
Pin Configurations continued at end of data sheet2
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
SC70, Low-Power, General-Purpose,
Dual-Supply, Rail-to-Rail Op Amps
ABSOLUTE MAXIMUM RATINGS
Supply ꢀoltage (ꢀ
to ꢀ )222222222222222222222222222222222222222222222222ꢁ1±ꢀ
8-Pin SOT±3 (derate 921mW/°C above ꢁ70°C)22222222227±7mW
8-Pin µMAX (derate 425mW/°C above ꢁ70°C)2222222222236±mW
8-Pin SO (derate 529mW/°C above ꢁ70°C)2222222222222222471mW
14-Pin TSSOP (derate 921mW/°C above ꢁ70°C) 22222227±7mW
14-Pin SO (derate 823mW/°C above ꢁ70°C)22222222222222667mW
Operating Temperature Range 2222222222222222222222222-40°C to ꢁ1±5°C
Storage Temperature Range22222222222222222222222222222-65°C to ꢁ150°C
Lead Temperature (soldering, 10s) 222222222222222222222222222222222ꢁ300°C
CC
EE
ꢀoltage from Any Pin to Ground or
Any Other Pin22222222222222222222222222222(ꢀ - 023ꢀ) to (ꢀ
ꢁ 023ꢀ)
EE
CC
Output Short-Circuit Duration to
ꢀ , ꢀ
CC EE,
or Ground 22222222222222222222222222222222222222222222Continuous
Continuous Power Dissipation (T = ꢁ70°C)
A
5-Pin SC70 (derate 321mW/°C above ꢁ70°C)222222222222±47mW
5-Pin SOT±3 (derate 721mW/°C above ꢁ70°C)2222222222571mW
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device2 These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied2 Exposure to
absolute maximum rating conditions for extended periods may affect device reliability2
DC ELECTRICAL CHARACTERISTICS
(ꢀ
= ꢁ5ꢀ, ꢀ = -5ꢀ, R = 100kΩ to ground, T = -40°C to ꢁ1±5°C2 Typical values are at T = ꢁ±5°C, unless otherwise noted2)
CC
EE L A A
(Note 1)
PARAMETER
SYMBOL
CONDITIONS
Guaranteed by PSRR test
MIN
TYP
MAX
UNITS
Operating Supply ꢀoltage
Range
ꢀ
±2±5
525
ꢀ
S
Quiescent Supply Current per
Amplifier
I
770
023
1100
µA
S
T
T
= ꢁ±5°C
5
A
Input Offset ꢀoltage
ꢀ
mꢀ
µꢀ/°C
mꢀ
OS
= T
to T
10
A
MIN
MAX
Input Offset ꢀoltage Drift
TCꢀ
3
1
OS
3/MAX495
Input Offset ꢀoltage Channel
Matching
MAX4494 and MAX4495
Input Bias Current
Input Offset Current
I
02±
5
1
µA
nA
kΩ
B
I
300
OS
Differential mode (-1ꢀ ≤ ꢀ ≤ ꢁ1ꢀ)
±50
IN
Input Resistance
R
IN
Common mode (ꢀ - 02±ꢀ ≤ ꢀ
125ꢀ)
≤ ꢀ
-
CC
EE
CM
110
MΩ
Common-Mode Input ꢀoltage
Range
ꢀ
02±ꢀ
-
ꢀ
125ꢀ
-
CC
EE
ꢀ
Guaranteed by CMRR test
ꢀ
CM
Common-Mode Rejection Ratio
Power-Supply Rejection Ratio
CMRR
PSRR
ꢀ
- 02±ꢀ ≤ ꢀ
≤ ꢀ - 125ꢀ
CC
65
65
90
80
dB
dB
EE
CM
ꢀ = ±2±5ꢀ to 525ꢀ
S
R = 100kΩ, ꢀ ꢁ 02±5ꢀ ≤ ꢀ
02±5ꢀ
≤ ꢀ
-
CC
L
EE
OUT
85
65
110
Large-Signal ꢀoltage Gain
A
ꢀOL
dB
R = 1kΩ, ꢀ ꢁ 025ꢀ ≤ ꢀ
≤ ꢀ - 025ꢀ
CC
90
10
L
EE
OUT
R = 100kΩ, ꢀ
L
- ꢀ
and ꢀ - ꢀ
EE
150
450
CC
OH
OL
Output ꢀoltage Swing
ꢀ
mꢀ
mA
OUT
R = 1kΩ, ꢀ
- ꢀ
and ꢀ - ꢀ
EE
±00
15
L
CC
OH
OL
Output Short-Circuit Current
I
Sourcing or sinking
SC
Note 1: All devices are 100% production tested at T = ꢁ±5°C2 Limits over the operating temperature range are guaranteed by
A
design and not production tested2
2
_______________________________________________________________________________________
SC70, Low-Power, General-Purpose,
Dual-Supply, Rail-to-Rail Op Amps
3/MAX495
AC ELECTRICAL CHARACTERISTICS
(ꢀ
= ꢁ5ꢀ, ꢀ = -5ꢀ, R = 100kΩ to ground, C = 15pF, T = ꢁ±5°C, unless otherwise noted2)
CC
EE
L
L
A
PARAMETER
SYMBOL
GBWP
FPBW
SR
CONDITIONS
MIN
TYP
5
MAX
UNITS
MHz
Gain-Bandwidth Product
Full-Power Bandwidth
Slew Rate
V
= 5Vp-p
= 5Vp-p
190
3
kHz
OUT
OUT
V
V/µs
Phase Margin
75
15
degrees
dB
Gain Margin
Total Harmonic Distortion Plus
Noise
THD+N
f = 1kHz, V
= 5Vp-p, A = +1V/V
0.002
%
OUT
V
Settling Time to 0.01%
Input Capacitance
t
A = +1V/V, V
V
= 5V step
OUT
4
2
µs
pF
S
C
IN
IN
Input Noise Voltage Density
Input Noise Current Density
All-Hostile Crosstalk
e
f = 1kHz
f = 1kHz
8
nV/√Hz
pA/√Hz
dB
i
IN
0.2
-100
300
3
f = 1kHz, MAX4494 and MAX4495
A = +1V/V, no sustained oscillations
Capacitive-Load Stability
Power-Up Time
pF
V
t
V
= 1V, 1µs power supply rise-time
OUT
µs
ON
Typical Operating Characteristics
(ꢀ
= ꢁ5ꢀ, ꢀ = -5ꢀ, ꢀ
= 0, R = 100kΩ to ground, C = 15pF, T = ꢁ±5°C, unless otherwise noted2)
CM L L A
CC
EE
INPUT OFFSET VOLTAGE
vs.TEMPERATURE
INPUT BIAS CURRENT
vs.TEMPERATURE
SUPPLY CURRENT vs. TEMPERATURE
900
875
850
825
800
775
750
725
700
675
650
625
600
800
700
600
500
400
300
275
250
225
200
V
= 5V
SUPPLY
300
200
175
150
V
= 2.5V
SUPPLY
100
0
125
100
-50 -25
0
25
50
75 100 125
-50 -25
0
25
75 100 125
-50 -25
0
25
50
75 100 125
50
TEMPERATURE (°C)
TEMPERATURE (°C)
TEMPERATURE (°C)
_______________________________________________________________________________________
3
SC70, Low-Power, General-Purpose,
Dual-Supply, Rail-to-Rail Op Amps
Typical Operating Characteristics (continued)
(ꢀ
= ꢁ5ꢀ, ꢀ = -5ꢀ, ꢀ
= 0, R = 100kΩ to ground, C = 15pF, T = ꢁ±5°C, unless otherwise noted2)
CM L L A
CC
EE
INPUT BIAS CURRENT
vs. COMMON-MODE VOLTAGE
COMMON-MODE REJECTION
vs. FREQUENCY
POWER-SUPPLY REJECTION vs. FREQENCY
(V
=
2.5V to 5.5V)
SUPPLY
-40
-50
400
0
-20
V
= 2.5V
350
300
250
200
150
100
50
SUPPLY
-40
-60
V
= 5V
SUPPLY
-60
-70
-80
-80
-100
-120
-90
0
-100
-5.0
-2.5
0
2.5
5.0
1
10
100
1k
10k
100k 1M
100
1k
10k
100k
COMMON-MODE VOLTAGE (V)
FREQUENCY (Hz)
FREQUENCY (Hz)
INPUT VOLTAGE NOISE DENSITY
vs. FREQUENCY
OUTPUT VOLTAGE SWING
TOTAL HARMONIC DISTORTION PLUS
NOISE vs. FREQUENCY
vs. TEMPERATURE (R = 100kΩ)
L
100
10
1
0.008
0.007
0.006
0.005
0.004
0.003
0.002
0.001
0
20
18
16
14
12
10
8
V
- V
EE
OL
3/MAX495
V
CC
- V
OH
6
4
2
0
1
10
100
1k
10k
100k
1M
-50 -25
0
25
50
75 100 125
10
1k
10k
100k
1
100
FREQUENCY (Hz)
TEMPERATURE (°C)
FREQUENCY (Hz)
LARGE-SIGNAL GAIN
vs. TEMPERATURE
OUTPUT VOLTAGE SWING
vs. TEMPERATURE (R = 1kΩ)
GAIN AND PHASE vs. FREQUENCY
L
MAX4493-12
275
250
140
120
100
80
270
225
180
60
50
40
30
A = +1000V/V
V
R = 100kΩ
L
225
200
175
150
125
V
+ 0.25V ≤ V
≤ V - 0.25V
CC
EE
OUT
135
GAIN
V
- V
OH
CC
90
45
20
10
0
0
R = 1kΩ
L
-45
-10
-20
-30
-40
-50
-60
V
EE
+ 0.5V ≤ V
≤ V - 0.5V
CC
OUT
V
- V
100
75
OL
EE
-90
PHASE
100k
-135
-180
-225
-270
60
50
25
0
40
-50 -25
0
25
75 100 125
50
-50 -25
0
25
50
75 100 125
0.1k
1k
10k
1M
10M 100M
TEMPERATURE (°C)
TEMPERATURE (°C)
FREQUENCY (Hz)
4
_______________________________________________________________________________________
SC70, Low-Power, General-Purpose,
Dual-Supply, Rail-to-Rail Op Amps
3/MAX495
Typical Operating Characteristics (continued)
(ꢀ
= ꢁ5ꢀ, ꢀ = -5ꢀ, ꢀ
= 0, R = 100kΩ to ground, C = 15pF, T = ꢁ±5°C, unless otherwise noted2)
CM L L A
CC
EE
LARGE-SIGNAL GAIN vs. OUTPUT VOLTAGE
GAIN AND PHASE vs. FREQUENCY
(C = 300pF)
SWING (R TO V , V = +5V, V = -5V)
L
CC CC
EE
L
MAX4493-13
60
50
40
30
120
115
110
105
100
95
270
225
180
135
90
A = +1000V/V
V
R = 100kΩ
L
20
10
GAIN
R = 10kΩ
45
0
L
0
-10
-20
-30
-40
-45
R = 1kΩ
L
-90
PHASE
-135
-180
-225
-270
90
85
-50
-60
0.1k
80
8.8
9.0
9.2
9.4
9.6
9.8
10.0
1k
10k
100k
1M
10M 100M
TOTAL OUTPUT VOLTAGE SWING (V
)
P-P
FREQUENCY (Hz)
LARGE-SIGNAL GAIN vs. OUTPUT VOLTAGE
LARGE-SIGNAL GAIN vs. OUTPUT VOLTAGE
SWING (R TO V , V = +2.25V, V = -2.25V)
LARGE-SIGNAL GAIN vs. OUTPUT VOLTAGE
SWING (R TO V , V = +2.25V, V = -2.25V)
SWING (R TO V , V = +5V, V = -5V)
L
EE CC
EE
L
CC CC
EE
L
EE CC
EE
120
120
115
110
105
115
110
105
100
115
R = 100kΩ
L
R = 100kΩ
110
105
100
R = 100kΩ
L
L
R = 10kΩ
L
95
R = 10kΩ
L
R = 10kΩ
L
95
90
100
95
90
85
80
90
85
R = 1kΩ
L
85
80
R = 1kΩ
L
R = 1kΩ
L
80
75
70
75
70
8.8
9.0
9.2
9.4
9.6
9.8
10.0
3.4
3.6
3.8
4.0
4.2
4.4
3.4
3.6
3.8
4.0
4.2
4.4
TOTAL OUTPUT VOLTAGE SWING (V
)
P-P
TOTAL OUTPUT VOLTAGE SWING (V
)
P-P
TOTAL OUTPUT VOLTAGE SWING (V
)
P-P
MAX4494/MAX4495
CROSSTALK vs. FREQUENCY
LARGE-SIGNAL TRANSIENT RESPONSE
0
-20
INPUT VOLTAGE
(2V/div)
-40
-60
OUTPUT VOLTAGE
(2V/div)
-80
-100
-120
10k
100k
1M
10M
10μs/div
FREQUENCY (Hz)
_______________________________________________________________________________________
ꢀ
SC70, Low-Power, General-Purpose,
Dual-Supply, Rail-to-Rail Op Amps
Typical Operating Characteristics (continued)
(ꢀ
= ꢁ5ꢀ, ꢀ = -5ꢀ, ꢀ
= 0, R = 100kΩ to ground, C =15pF, T = ꢁ±5°C, unless otherwise noted2)
CM L L A
CC
EE
LARGE-SIGNAL CAPACITIVE-LOAD STABILITY
SMALL-SIGNAL CAPACITIVE-LOAD STABILITY
SMALL-SIGNAL TRANSIENT RESPONSE
(C = 1200pF)
L
(C = 300pF)
L
10μs/div
200ns/div
200ns/div
LARGE-SIGNAL TRANSIENT RESPONSE
SMALL-SIGNAL TRANSIENT RESPONSE
(R = 15Ω, C = 0.01μF)
(R = 15Ω, C = 1000pF)
ISO
L
ISO
L
3/MAX495
200ns/div
10μs/div
STABILITY vs. CAPACITIVE
AND RESISTIVE LOADS
POWER-UP TIME (V = +1V)
IN
1000
10
900
800
700
600
500
400
300
200
100
0
V
CC
- V
EE
(4V/div)
0
1V
STABLE
REGION
OUTPUT VOLTAGE
(500mV/div)
0
1k
10k
100k
10μs/div
R
(Ω)
LOAD
6
_______________________________________________________________________________________
SC70, Low-Power, General-Purpose,
Dual-Supply, Rail-to-Rail Op Amps
3/MAX495
Pin Description
PIN
NAME
FUNCTION
MAX4493
MAX4494
MAX449ꢀ
—
—
—
—
—
—
—
—
—
—
—
—
4
1
±
1
±
OUTA
INA-
Channel A Output
Channel A Inverting Input
Channel A Noninverting Input
Channel B Output
3
3
INAꢁ
OUTB
INB-
7
7
6
6
Channel B Inverting Input
Channel B Noninverting Input
Channel C Output
5
5
INBꢁ
OUTC
INC-
INCꢁ
OUTD
IND-
INDꢁ
OUT
INꢁ
—
—
—
—
—
—
—
—
—
8
8
9
Channel C Inverting Input
Channel C Noninverting Input
Channel D Output
10
14
13
1±
—-
—
—
4
Channel D Inverting Input
Channel D Noninverting Input
Output
1
Noninverting Input
3
IN-
Inverting Input
5
ꢀ
Positive Supply
CC
±
4
11
ꢀ
Negative Supply
EE
stable with capacitive loads up to 300pF2 The
Capacitive-Load Stability graph in the Typical
Operating Characteristics gives the stable operation
region for capacitive versus resistive load2 Stability with
higher capacitive loads can be improved by adding an
isolation resistor in series with the op-amp output, as
shown in Figure 12 This resistor improves the circuit’s
phase margin by isolating the load capacitor from the
amplifier’s output2 As seen in the Typical Operating
Characteristics, driving capacitive loads with an isola-
tion resistor exhibits some overshoot, but no oscillation2
Applications Information
Rail-to-Rail Output Stage
The MAX4493/MAX4494/MAX4495 output stage can
drive up to 1kΩ and still swing within ±00mꢀ of the rails2
Capacitive-Load Stability
Driving large capacitive loads can cause instability in
many op amps2 The MAX4493/MAX4494/MAX4495 are
Full-Power Bandwidth
The FPBW is given by:
R
ISO
SR
OUTPUT
FPBW(Hz) =
MAX4493
C
L
π ꢀ
[
OUTp−p(max)
]
INPUT
Figure 12 Capacitive Load Driving Circuit
_______________________________________________________________________________________
7
SC70, Low-Power, General-Purpose,
Dual-Supply, Rail-to-Rail Op Amps
where the slew rate (SR) is 3ꢀ/µs2 Figure ± shows the
full-power bandwidth as a function of the peak-to-peak
AC output voltage2
BANDWIDTH
vs. OUTPUT VOLTAGE SWING
100M
10M
1M
Power-Up Conditions
The MAX4493/MAX4494/MAX4495 typically settle within
3µs after power-up2 See Power-Up Time in Typical
Operating Characteristics2
A
V
= +1V/V
Power Supplies and Layout
The MAX4493/MAX4494/MAX4495 operate with dual
supplies from ±±2±5ꢀ to ±525ꢀ2 Bypass both ꢀ
EE
and
CC
ꢀ
with their own 021µF capacitor to ground2
Good layout technique helps optimize performance by
decreasing the amount of stray capacitance at the op
amp’s inputs and outputs2 To decrease stray capaci-
tance, minimize trace lengths by placing external com-
ponents close to the op amp’s pins2
100k
0
1
2
3
4
5
V
OUT
(Vp-p)
Figure ±2 Bandwidth vs2 Peak-to-Peak AC ꢀoltage Plot
Pin Configurations (continued)
TOP VIEW
TOP VIEW
OUTA
INA-
1
2
3
4
5
6
7
14 OUTD
13 IND-
12 IND+
OUTA
INA-
1
2
3
4
8
7
6
5
V
CC
INA+
OUTB
INB-
V
11
V
EE
MAX4495
CC
MAX4494
INA+
INB+
INB-
10 INC+
3/MAX495
9
8
INC-
V
INB+
EE
OUTB
OUTC
SO/SOT23/μMAX
SO/TSSOP
Chip Information
Typical Operating Circuit
MAX4493 TRANSISTOR COUNT: 81
MAX4494 TRANSISTOR COUNT: 159
MAX4495 TRANSISTOR COUNT: 318
PROCESS: Bipolar
R
R
f
g
+5V
+5V
0.1μF
0.1μF
R
ISO
V
OUT
MAX4493
REF
DAC
0.1μF
0.1μF
-5V
-5V
8
_______________________________________________________________________________________
SC70, Low-Power, General-Purpose,
Dual-Supply, Rail-to-Rail Op Amps
3/MAX495
Package Information
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages2
PACKAGE TYPE
14 TSSOP
5 SOT±3
5 SC70
PACKAGE CODE
DOCUMENT NO.
21-0066
U14-1
U5-1
X5-1
21-00ꢀ7
21-0076
8 SO
S8-±
21-0041
8 SOT±3
8 µMAX
K8-5
U8-1
S14-1
21-0078
21-0036
14 SO
21-0041
_______________________________________________________________________________________
9
SC70, Low-Power, General-Purpose,
Dual-Supply, Rail-to-Rail Op Amps
Package Information (continued)
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages2
3/MAX495
10 ______________________________________________________________________________________
SC70, Low-Power, General-Purpose,
Dual-Supply, Rail-to-Rail Op Amps
3/MAX495
Package Information (continued)
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages2
PACKAGE OUTLINE, 5L SC70
1
21-0076
E
1
______________________________________________________________________________________ 11
SC70, Low-Power, General-Purpose,
Dual-Supply, Rail-to-Rail Op Amps
Package Information (continued)
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages2
INCHES
MILLIMETERS
DIM
A
MIN
MAX
0.069
0.010
0.019
0.010
MIN
1.35
0.10
0.35
0.19
MAX
1.75
0.25
0.49
0.25
0.053
0.004
0.014
0.007
N
A1
B
C
e
0.050 BSC
1.27 BSC
E
0.150
0.228
0.016
0.157
0.244
0.050
3.80
5.80
0.40
4.00
6.20
1.27
E
H
H
L
VARIATIONS:
INCHES
1
MILLIMETERS
DIM
D
MIN
MAX
0.197
0.344
0.394
MIN
4.80
8.55
9.80
MAX
5.00
N
8
MS012
AA
TOP VIEW
0.189
0.337
0.386
D
8.75 14
10.00 16
AB
D
AC
D
C
A
B
0 -8
e
A1
L
FRONT VIEW
SIDE VIEW
3/MAX495
PROPRIETARY INFORMATION
TITLE:
PACKAGE OUTLINE, .150" SOIC
APPROVAL
DOCUMENT CONTROL NO.
REV.
1
21-0041
B
1
12 ______________________________________________________________________________________
SC70, Low-Power, General-Purpose,
Dual-Supply, Rail-to-Rail Op Amps
3/MAX495
Package Information (continued)
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages2
MARKING
0
0
PACKAGE OUTLINE, SOT-23, 8L BODY
1
21-0078
H
1
______________________________________________________________________________________ 13
SC70, Low-Power, General-Purpose,
Dual-Supply, Rail-to-Rail Op Amps
Package Information (continued)
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages2
α
α
3/MAX495
14 ______________________________________________________________________________________
SC70, Low-Power, General-Purpose,
Dual-Supply, Rail-to-Rail Op Amps
Revision History
RE5ISION
NUMBER
RE5ISION
DATE
PAGES
DESCRIPTION
CHANGED
±
10/08
Updated first paragraph of the General Description section
1
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product2 No circuit patent licenses are
implied2 Maxim reserves the right to change the circuitry and specifications without notice at any time2
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 1ꢀ
© ±008 Maxim Integrated Products
is a registered trademark of Maxim Integrated Products, Inc2
相关型号：
MAX4495ASD-T
Operational Amplifier, 4 Func, 10000uV Offset-Max, BIPolar, PDSO14, 0.150 INCH, MS-012, SOIC-14
MAXIM
©2020 ICPDF网 联系我们和版权申明