MAX4888ETI+T [MAXIM]
SPDT, 4 Func, CMOS, PQCC28,;型号: | MAX4888ETI+T |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | SPDT, 4 Func, CMOS, PQCC28, 开关 PC |
文件: | 总16页 (文件大小:268K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
19-0724; Rev 0; 5/07
2.5Gbps PCI Express Passive Switches
/MAX489
General Description
Features
The MAX4888/MAX4889 high-speed passive switches
route PCI Express® (PCIe) data between two possible
destinations. The MAX4888 is a quad single-pole/double-
throw (4 x SPDT) switch ideally suited for switching two
half lanes of PCIe data between two destinations. The
MAX4889 is an octal single-pole/double-throw (8 x SPDT)
switch ideal for switching four half lanes of PCIe data
between four destinations. The MAX4888/MAX4889 fea-
ture a single digital control input (SEL) to switch signal
paths.
♦ Single 1.65V to 3.6V Power-Supply Voltage
♦ Low Same-Pair Skew of 7ps
♦ Low 120µA (Max) Quiescent Current
♦ Supports PCIe Gen I Data Rates
♦ Flow-Through Pin Configuration for Ease of
Layout
♦ Industry-Compatible Pinout
♦ Lead-Free Packaging
The MAX4888/MAX4889 are fully specified to operate
from a single 3.0V to 3.6V power supply and also oper-
ate down to +1.65V. The MAX4888 is available
in a 3.5mm x 5.5mm, 28-pin TQFN package. The
MAX4889 is available in a 3.5mm x 9.0mm, 42-pin TQFN
package. Both devices operate over the -40°C to +85°C
temperature range.
Ordering Information/
Selector Guide
PIN-
PACKAGE
PKG
PART
CONFIGURATION
CODE
Applications
Two
Half Lanes
Desktop Computers
Servers/Storage Area Networks
Laptops
MAX4888ETI+ 28 TQFN-EP*
MAX4889ETO+ 42 TQFN-EP*
T283555-1
Four Half
Lanes
T423590M-1
Note: All devices are specified over the -40°C to +85°C operat-
ing temperature range.
+Denotes lead-free package.
*EP = Exposed paddle.
PCI Express is a registered trademark of PCI-Sig Corp.
Typical Application Circuit appears at end of data sheet.
Pin Configurations
TOP VIEW
38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22
24 23 22 21 20 19 18 17 16 15
39
21 GND
20 V+
25
26
14 GND
13 V+
GND
V+
GND
V+
40
MAX4888
GND 41
V+ 42
MAX4889
19 GND
18 V+
GND 27
V+ 28
12 GND
11 V+
*EP
*EP
+
+
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17
1
2
3
4
5
6
7
8
9
10
TQFN
TQFN
*CONNECT EXPOSED PADDLE TO GROUND.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim's website at www.maxim-ic.com.
2.5Gbps PCI Express Passive Switches
ABSOLUTE MAXIMUM RATINGS
(All voltages referenced to GND, unless otherwise noted.)
V+.............................................................................-0.3V to +4V
SEL, COM__, NO__, NC__ (Note 1) .............-0.3V to (V+ + 0.3V)
| COM__ - NO__ |, | COM__ - NC__ | (Note 1)...................0 to 2V
Continuous Current (COM_ to NO__/NC__) ..................... 70mA
Peak Current (COM__ to NO__/NC__)
Continuous Power Dissipation (T = +70°C)
A
28-Pin TQFN (derate 20.8mW/°C above +70°C) ....1666.7mW
42-Pin TQFN (derate 35.7mW/°C above +70°C) ....2857.1mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range.............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Junction Temperature......................................................+150°C
(pulsed at 1ms, 10% duty cycle).................................. 70mA
Continuous Current (SEL)................................................. 30mA
Peak Current (SEL)
(pulsed at 1ms, 10% duty cycle)................................ 150mA
Note 1: Signals on SEL, NO__, NC__ or COM__ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current
to maximum current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
/MAX489
(V+ = 3.0V to 3.6V, T = -40°C to +85°C, unless otherwise noted. Typical values are at V+ = 3.3V, T = +25°C.) (Note 2)
A
A
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
ANALOG SWITCH
V
,
COM_
Analog-Signal Range
-0.1
0
(V+ - 1.2)
V
V
V
NO_, NC_
| V
V
| V
-
-
COM_
| ,
NO_
Voltage Between COM and
NO/NC
1.8
V
COM_
V
|
NC_
V+ = 3.0V, I
= 15mA,
COM_
On-Resistance
R
7
Ω
Ω
ON
V
or V
= 0V, 1.8V
NC_
NO_
On-Resistance Match Between
Pairs of Same Channel
V+ = 3.0V, I
= 15mA,
COM_
ΔR
ΔR
0.1
0.6
0.06
1
2
ON
V
or V
= 0V (Notes 3, 4)
NC_
NO_
On-Resistance Match
Between Channels
V+ = 3.0V, I
= 15mA,
COM_
Ω
ON
V
or V
= 0V (Notes 3, 4)
NC_
NO_
V+ = 3.0V, I
= 15mA
COM_
On-Resistance Flatness
R
2
Ω
FLAT(ON)
V
or V
= 0V, 1.8V (Notes 4, 5)
NC_
NO_
NO_ or NC_ Off-Leakage
Current
I
I
V+ = 3.6V; V
= 0V, 1.8V;
= 1.8V, 0V
NO_(OFF)
COM_
-1
-1
+1
+1
µA
µA
V
or V
NC_(OFF)
NO_
NC_
COM_ On-Leakage
Current
V+ = 3.6V; V
or V
= 0V, 1.8V;
or unconnected
COM_
= V
I
COM_(ON)
V
NO_
NC_
COM_
2
_______________________________________________________________________________________
2.5Gbps PCI Express Passive Switches
/MAX489
ELECTRICAL CHARACTERISTICS (continued)
(V+ = 3.0V to 3.6V, T = -40°C to +85°C, unless otherwise noted. Typical values are at V+ = 3.3V, T = +25°C.) (Note 2)
A
A
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
DYNAMIC
Turn-On Time
t
V
V
or V
or V
= 1.0V, R = 50Ω, Figure 1
90
10
50
250
50
ns
ns
ps
ON
NO_
NO_
NC_
NC_
L
Turn-Off Time
t
= 1.0V, R = 50Ω, Figure 1
L
OFF
Propagation Delay
t
R = R = 50Ω, unbalanced, Figure 2
S L
PD
R = R = 50Ω, unbalanced; skew between
any two pairs, Figure 2
S
L
Output Skew Between Pairs
t
t
50
10
ps
ps
SK1
SK2
Output Skew Between Same
Pair
R = R = 50Ω, unbalanced; skew between
S
L
two lines on same pair, Figure 2
R = R = 50Ω,
unbalanced,
Figure 3
S
L
1MHz < f < 100MHz
-0.5
-1.4
On-Loss
G
dB
dB
LOS
CT1
500MHz< f < 1.25GHz
Crosstalk between
any two pairs,
f = 50MHz
-53
-32
Crosstalk
V
R = R = 50Ω,
S L
unbalanced,
Figure 3
f = 1.25GHz
Signaling Data Rate
Off-Isolation
BR
R = R = 50Ω
3.0
-56
Gbps
dB
S
L
Signal = 0dBm,
f = 10MHz
V
R = R = 50Ω,
ISO
S
L
f = 1.25GHz
-26
Figure 3
C
NO_/NC_(OFF)
NO_/NC_ Off-Capacitance
COM_ On-Capacitance
LOGIC INPUT
Figure 4
Figure 4
1
2
pF
pF
C
COM_(ON)
Input-Logic Low
V
0.5
+1
V
V
IL
Input-Logic High
V
1.4
-1
IH
Input-Logic Hysteresis
Input Leakage Current
POWER SUPPLY
V
100
mV
µA
HYST
I
V
V
= 0V or V+
= 0V or V+
IN
SEL
SEL
Power-Supply Range
V+
I+
1.65
3.60
60
V
MAX4888
MAX4889
V+ Supply Current
µA
120
Note 2: All units are 100% production tested at T = +85°C. Limits over the operating temperature range are guaranteed by design
A
and characterization and are not production tested.
Note 3: ΔR
= R
- R
.
ON
ON (MAX)
ON (MIN)
Note 4: Guaranteed by design. Not production tested.
Note 5: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the
specified analog signal range.
_______________________________________________________________________________________
3
2.5Gbps PCI Express Passive Switches
Typical Operating Characteristics
(T = +25°C, unless otherwise noted.)
A
ON-RESISTANCE vs. V
(V+ = 1.8V)
ON-RESISTANCE vs. V
(V+ = 2.5V)
COM
COM
ON-RESISTANCE vs. V
COM
10.0
14
12
10
8
14
12
10
8
T
= +85°C
A
T
= +85°C
V+ = 1.8V
9.5
A
T
= +25°C
A
9.0
T
= +25°C
A
8.5
8.0
7.5
7.0
6.5
6.0
5.5
5.0
V+ = 2.5V
6
6
T
= -40°C
A
4
4
V+ = 3.3V
2
2
T
= -40°C
A
0
0
-0.1 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1
(V)
-0.1
0
0.1 0.2 0.3 0.4 0.5 0.6
(V)
-0.1 0.1 0.3 0.5 0.7 0.9 1.1 1.3
(V)
/MAX489
V
V
V
COM
COM
COM
ON-RESISTANCE vs. V
(V+ = 3.3V)
COM
SUPPLY CURRENT vs. TEMPERATURE
(MAX4888)
14
12
10
8
80
70
60
50
40
30
20
10
0
T
= +85°C
A
T
= +25°C
A
V+ = 3.3V
V+ = 2.5V
6
4
2
V+ = 1.8V
T
= -40°C
A
0
-0.1 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1
(V)
-40
-15
10
35
60
85
V
TEMPERATURE (°C)
COM
4
_______________________________________________________________________________________
2.5Gbps PCI Express Passive Switches
/MAX489
Typical Operating Characteristics (continued)
(T = +25°C, unless otherwise noted.)
A
EYE DIAGRAM
(V+ = 1.8V, f = 1.25GHz,
†
LOGIC THRESHOLD vs. SUPPLY VOLTAGE
TURN-ON/-OFF TIME vs. SUPPLY VOLTAGE
600mV PRBS SIGNAL, R = R = 50Ω)
P-P
S
L
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
240
220
200
180
160
140
120
100
80
V
COM_+
NO_ t
ON
V
IH
50mV/div
NC_ t
ON
V
IL
60
NO_ t
OFF
40
NC_ t
OFF
20
V
COM_-
0
1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6
SUPPLY VOLTAGE (V)
1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6
SUPPLY VOLTAGE (V)
50ps/div
*PRBS = PSEUDORANDOM BIT SEQUENCE
GEN I; 2.5Gps; UI = 400ps
†
EYE DIAGRAM
(V+ = 2.5V, f = 1.25GHz,
EYE DIAGRAM
(V+ = 3.3V, f = 1.25GHz,
600mV PRBS SIGNAL, R = R = 50Ω)
†
†
600mV PRBS SIGNAL, R = R = 50Ω)
P-P
S
L
P-P
S
L
V
V
COM_+
COM_+
50mV/div
50mV/div
V
V
COM_-
COM_-
50ps/div
50ps/div
*PRBS = PSEUDORANDOM BIT SEQUENCE
GEN I; 2.5Gps; UI = 400ps
*PRBS = PSEUDORANDOM BIT SEQUENCE
GEN I; 2.5Gps; UI = 400ps
†
†
_______________________________________________________________________________________
5
2.5Gbps PCI Express Passive Switches
Pin Description
PIN
NAME
FUNCTION
MAX4888
MAX4889
1, 10, 12, 14, 1, 4, 10, 14, 17,
GND
Ground
20, 25, 27
19, 21, 39, 41
2
3, 9
4
5
6
9
—
2
3
6
SEL
N.C.
COM1+
COM1-
COM2+
COM2-
Digital Control Input
No Connection. Not internally connected.
Analog Switch 1. Common Positive Terminal.
Analog Switch 1. Common Negative Terminal.
Analog Switch 2. Common Positive Terminal.
Analog Switch 2. Common Negative Terminal.
7
7
5, 8, 13, 18,
20, 30,
Positive-Supply Voltage Input. Connect V+ to a 1.65V to 3.6V supply voltage.
Bypass V+ to GND with a 0.1µF capacitor placed as close to the device as possible.
(See the Board Layout section).
8, 11, 13, 19,
26, 28
V+
40, 42
15
16
17
18
21
22
23
24
—
—
—
—
—
—
—
—
—
—
—
—
EP
31
32
33
34
35
36
37
38
11
12
15
16
22
23
24
25
26
27
28
29
EP
NO2-
NO2+
NO1-
Analog Switch 2. Normally Open Negative Terminal.
Analog Switch 2. Normally Open Positive Terminal.
Analog Switch 1. Normally Open Negative Terminal.
Analog Switch 1. Normally Open Positive Terminal.
Analog Switch 2. Normally Closed Negative Terminal.
Analog Switch 2. Normally Closed Positive Terminal.
Analog Switch 1. Normally Closed Negative Terminal.
Analog Switch 1. Normally Closed Positive Terminal.
Analog Switch 3. Common Positive Terminal.
/MAX489
NO1+
NC2-
NC2+
NC1-
NC1+
COM3+
COM3-
COM4+
COM4-
NO4-
Analog Switch 3. Common Negative Terminal.
Analog Switch 4. Common Positive Terminal.
Analog Switch 4. Common Negative Terminal.
Analog Switch 4. Normally Open Negative Terminal.
Analog Switch 4. Normally Open Positive Terminal.
Analog Switch 3. Normally Open Negative Terminal.
Analog Switch 3. Normally Open Positive Terminal.
Analog Switch 4. Normally Closed Negative Terminal.
Analog Switch 4. Normally Closed Positive Terminal.
Analog Switch 3. Normally Closed Negative Terminal.
Analog Switch 3. Normally Closed Positive Terminal.
Exposed Paddle. Connect EP to GND.
NO4+
NO3-
NO3+
NC4-
NC4+
NC3-
NC3+
EP
6
_______________________________________________________________________________________
2.5Gbps PCI Express Passive Switches
/MAX489
Test Circuits/Timing Diagrams
MAX4888/MAX4889
3.3V
V+
t < 5ns
t < 5ns
f
r
V
IH
LOGIC
INPUT
50%
V
IL
NO_
COM_
V
N_
V
OUT
OR NC_
t
OFF
R
L
C
L
SEL
V
OUT
0.9 x V
0.9 x V
OUT
0UT
GND
LOGIC
INPUT
SWITCH
OUTPUT
0V
t
ON
C INCLUDES FIXTURE AND STRAY CAPACITANCE.
L
R
L
V
OUT
= V
N_
(
)
R + R
ON
L
V
N_
= V
NO_
OR V
NC_
Figure 1. Switching Time
_______________________________________________________________________________________
7
2.5Gbps PCI Express Passive Switches
Test Circuits/Timing Diagrams (continued)
3.3V
V+
MAX4888/MAX4889
NO_+ OR
NC_+
R
R
S
COM_+
COM_-
IN+
IN-
OUT+
OUT-
RISE-TIME PROPAGATION DELAY = t
OR t
PLHY
PLHX
FALL-TIME PROPAGATION DELAY = t
OR t
PHLY
PHLX
R
R
L
t
= DIFFERENCE IN PROPAGATION DELAY (RISE-FALL)
SK1
SK2
BETWEEN ANY TWO PAIRS
= | t - t | OR | t
NO_- OR
NC_-
S
t
- t |
PHLX PLHY
PLHX PHLY
BETWEEN TWO LINES ON THE SAME PAIR
L
/MAX489
SEL
t
INFALL
t
INRISE
10%
1.5V
90%
90%
V
IN+
50%
50%
10%
0V
1.5V
V
IN-
50%
50%
0V
t
t
OUTRISE
OUTFALL
10%
t
t
PLHX
PHLX
1.5V
90%
90%
V
OUT+
50%
50%
10%
0V
1.5V
50%
50%
V
OUT-
0V
t
t
PHLY
PLHY
Figure 2. Propagation Delay and Output Skew
8
_______________________________________________________________________________________
2.5Gbps PCI Express Passive Switches
/MAX489
Test Circuits/Timing Diagrams (continued)
0.1μF
3.3V
V+
V
V
OUT
OFF-ISOLATION = 20log
ON-LOSS = 20log
IN
NETWORK
ANALYZER
V
50Ω
50Ω
OUT
V
V
0V OR V+
IN
SEL
V
IN
COM_
V
OUT
MAX4888/MAX4889
CROSSTALK = 20log
NC_
V
IN
MEAS
REF
OUT
NO_
50Ω
50Ω
50Ω
GND
MEASUREMENTS ARE STANDARDIZED AGAINST SHORTS AT IC TERMINALS.
OFF-ISOLATION IS MEASURED BETWEEN COM_ AND "OFF" NO_ OR NC_ TERMINAL ON EACH SWITCH.
ON-LOSS IS MEASURED BETWEEN COM_ AND "ON" NO_ OR NC_ TERMINAL ON EACH SWITCH.
CROSSTALK IS MEASURED BETWEEN ANY TWO PAIRS.
SIGNAL DIRECTION THROUGH SWITCH IS REVERSED; WORST VALUES ARE RECORDED.
Figure 3. On-Loss, Off-Isolation, and Crosstalk
sets of eight lanes from a single 16-lane bus. The
MAX4888/MAX4889 feature a single digital control input
(SEL) to switch signal paths.
3.3V
V+
0.1μF
The MAX4888/MAX4889 are fully specified to operate
from a single 3.0V to 3.6V power supply and also oper-
ate down to 1.65V.
COM_
MAX4888/MAX4889
Digital Control Input (SEL)
The MAX4888/MAX4889 provide a single digital control
input (SEL) to select the signal path between the
COM__ and NO__/NC__ channels. The truth tables for
the MAX4888/MAX4889 are depicted in the Functional
Diagrams/Truth Table section. Drive SEL rail-to-rail to
minimize power consumption.
SEL
V
IL
OR V
IH
CAPACITANCE
METER
NC_ or
NO_
GND
Analog Signal Levels
The MAX4888/MAX4889 accept standard PCIe signals
to a maximum of V+ - 1.2V. Signals on the COM_+
channels are routed to either the NO_+ or NC_+ chan-
nels, and signals on the COM_- channels are routed to
either the NO_- or NC_- channels. The MAX4888/
MAX4889 are bidirectional switches, allowing COM__,
NO__, and NC__ to be used as either inputs or outputs.
Figure 4. Channel Off-/On-Capacitance
Detailed Description
The MAX4888/MAX4889 high-speed passive switches
route PCIe data between two possible destinations. The
MAX4888/MAX4889 are ideal for routing PCIe signals to
change the system configuration. For example, in a
graphics application, the MAX4888/MAX4889 create two
_______________________________________________________________________________________
9
2.5Gbps PCI Express Passive Switches
Functional Diagrams/Truth Table
V+
V+
MAX4888
MAX4889
COM1+
COM1-
NC1+
NC1-
NO1+
NO1-
NC2+
NC2-
NO2+
NO2-
COM1+
COM1-
NC1+
NC1-
NO1+
NO1-
NC2+
NC2-
NO2+
NO2-
NC3+
NC3-
NO3+
NO3-
NC4+
NC4-
NO4+
NO4-
COM2+
COM2-
COM2+
COM2-
/MAX489
SEL
COM3+
COM3-
GND
COM__ TO COM__ TO
NC__
COM4+
COM4-
SEL
NO__
0
1
ON
OFF
OFF
ON
SEL
GND
10 ______________________________________________________________________________________
2.5Gbps PCI Express Passive Switches
/MAX489
Applications Information
DATA
DIRECTION
PCIe Switching
The MAX4888/MAX4889 primary applications are aimed
MAX4888
MAX4889
at reallocating PCIe lanes (see Figure 5). For example,
in graphics applications, several manufacturers have
found that it is possible to improve performance by a
factor of nearly two by splitting a single 16-lane PCIe
bus into two 8-lane buses. Two of the more prominent
examples are SLI™ (Scaled Link Interface) and
CrossFire™. The MAX4889 permits a computer mother-
board to operate properly with a single 16-lane graph-
ics card, and can later be updated to dual cards. The
same motherboard can be used with dual cards where
the user sets a jumper or a bit through software to
switch between single- or dual-card operation.
ONE LANE
DATA IS ROUTED
TO EITHER
BOARD A OR B
NOTE: ONLY ONE LANE IS SHOWN FOR CLARITY
Board Layout
High-speed switches require proper layout and design
procedures for optimum performance. Keep design-
controlled impedance PCB traces as short as possible
or follow impedance layouts per the PCIe specification.
Ensure that power-supply bypass capacitors are
placed as close to the device as possible. Multiple
bypass capacitors are recommended. Connect all
grounds and the exposed pad to large ground planes.
A
B
Figure 5. The MAX4888/MAX4889 Used as a Single-Lane
Switch
Chip Information
PROCESS: CMOS
CrossFire™ is a trademark of ATI Technologies, Inc.
SLI™ is a trademark of NVIDIA Corporation.
______________________________________________________________________________________ 11
2.5Gbps PCI Express Passive Switches
Typical Application Circuit
PCIe GRAPHICS INTERFACE
GRAPHICS
CARD 1
GRAPHICS
CARD 2
PCIe BUS
COM1+
COM1-
COM2+
COM2-
COM3+
COM3-
COM4+
COM4-
NC1+
LANE 0 TX
NC1-
NC2+
NC2-
NC3+
NC3-
NC4+
NC4-
NO1+
NO1-
NO2+
NO2-
NO3+
NO3-
NO4+
NO4-
LANE 1 TX
LANE 2 TX
LANE 3 TX
MAX4889
/MAX489
SEL
CHANNEL SELECT
COM1+
COM1-
COM2+
COM2-
COM3+
COM3-
COM4+
COM4-
NC1+
NC1-
NC2+
NC2-
NC3+
NC3-
NC4+
NC4-
NO1+
NO1-
NO2+
NO2-
NO3+
NO3-
NO4+
NO4-
LANE 0 RX
LANE 1 RX
LANE 2 RX
LANE 3 RX
MAX4889
SEL
CHANNEL SELECT
12 ______________________________________________________________________________________
2.5Gbps PCI Express Passive Switches
/MAX489
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages.)
°
______________________________________________________________________________________ 13
2.5Gbps PCI Express Passive Switches
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages.)
/MAX489
14 ______________________________________________________________________________________
2.5Gbps PCI Express Passive Switches
/MAX489
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages.)
°
______________________________________________________________________________________ 15
2.5Gbps PCI Express Passive Switches
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages.)
/MAX489
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
16 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2007 Maxim Integrated Products
is a registered trademark of Maxim Integrated Products., Inc.
相关型号:
©2020 ICPDF网 联系我们和版权申明