MAX5386MEVMINIQU [MAXIM]
2.6V to 5.25V Single-Supply Operation;型号: | MAX5386MEVMINIQU |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | 2.6V to 5.25V Single-Supply Operation |
文件: | 总14页 (文件大小:1379K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
19-4808; Rev 0; 1/10
MAX5386M Evaluation System
General Description
Features
Sꢀ 2.6V_to_5.25V_Single-Supply_Operation
The MAX5386M evaluation kit (EV kit) is an assembled
and tested PCB that features the MAX5386M 50kI dual
digital potentiometers. The MAX5386M IC features dual
volatile 50kI 256-tap, potentiometers and communi-
cates through an SPIK-compatible serial interface.
Sꢀ PC_USB_to_3-Wire_Interface_or_Stand-Alone_3-Wire_
Serial-Interface_Operation
Sꢀ Easy-to-Use_Menu-Driven_Software
Sꢀ Includes_Windows_2000-,_Windows_XP-,_and_
The MAX5386MEVMINIQU+ evaluation system (EV sys-
tem) includes the EV kit and the MINIQUSB+ interface
board. The MINIQUSB+ interface board can be used to
enable PC communication through the 3-wire serial inter-
Windows_Vista-Compatible_Software
Sꢀ Fully_Assembled_and_Tested
M
M
face. Windows 2000-, Windows XP -, and Windows
Ordering Information
M
Vista -compatible software provides a professional user
PART
TYPE
interface for exercising the MAX5386M’s features. The
program is menu driven and offers a graphical user
interface (GUI) complete with buttons, track bars, and
edit boxes. The MAX5386M EV kit software can also be
used to evaluate the MAX5386L, MAX5386N, MAX5388,
MAX5391, and MAX5393. The EV kit can also be inter-
faced directly to a user-supplied 3-wire system.
MAX5386MEVMINIQU+
EV System
+Denotes lead(Pb)-free and RoHS compliant.
Component Lists
MAX5386M EV System
(MAX5386MEVMINIQU+)
The MAX5386M IC can be powered from a 2.6V, 3.3V,
or 5V source generated from the MINIQUSB+ inter-
face board and EV kit circuitry, or a user-supplied
external 2.6V to 5.25V DC power supply. Order the
MAX5386MEVMINIQU+ for a complete PC-based evalu-
ation of the MAX5386M.
PART
QTY
DESCRIPTION
MAX5386MEVKIT+
MINIQUSB+
1
1
EV kit
Maxim command module
MAX5386M EV Kit
(MAX5386MEVKIT+)
The EV kit also contains PCB footprints for the MAX5388,
MAX5391, and MAX5393. To evaluate these parts, order
samples and fit the parts in places U4, U2, and U3,
respectively.
DESIGNATION
Qty
DESCRIPTION
C1, C2, C3, C7,
C10, C11, C14,
C15, C19, C20,
C23, C24, C25
1FF Q10%, 16V X5R ceramic
capacitors (0603)
Murata GRM188R71C105K or
TDK C1608X5R1C105K
13
0.1FF Q10%, 50V X7R
ceramic capacitors (0603)
Murata GRM188R71H104K or
TDK C1608X7R1H104K
C4, C8, C12, C16
C5, C6, C9, C13
C26
4
0
1
Not installed, ceramic
capacitors (0603)
10FF Q10%, 6.3V X5R
ceramic capacitor (0805)
Murata GRM21BR60J106K or
TDK C2012X5R0J106K
J1
J2
J3
1
1
1
2 x 4-pin header
2 x 8-pin header
8-pin female receptacle
JU1, JU3–JU6,
JU8–JU18
SPI is a trademark of Motorola, Inc.
16
3
2-pin headers
3-pin headers
Windows, Windows XP, and Windows Vista are registered
trademarks of Microsoft Corp.
JU2, JU7, JU19
_ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ _Maxim Integrated Products_ _ 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAX5386M Evaluation System
MAX5386M EV Kit (MAX5386MEVKIT+) (continued)
DESIGNATION
Qty
1
DESCRIPTION
4-pin header
DESIGNATION
Qty
DESCRIPTION
JU20
R1
Adjustable output LDO
regulator (5 SC70)
Maxim MAX8512EXK+
(Top Mark: ADW)
1
40.2kI Q1% resistor (0603)
100kI Q1% resistor (0603)
U5
1
R2
1
256-tap, 50kI dual digital
potentiometer (16 TQFN-EP*)
Maxim MAX5386MATE+
U1
1
0
2.6V LDO regulator (5 SC70)
Maxim MAX8511EXK26+
(Top Mark: AAW)
U6
U7
1
1
Not installed, digital
potentiometer (16 TQFN-EP*)
U2
U3
Single 1.8V to 5V level
translator (6 SC70)
Not installed, digital
potentiometer (14 TSSOP)
0
0
Dual 1.8V to 5V level
translator (8 SSOP)
U8
—
1
Not installed, digital
potentiometer (10 FMAXM)
U4
20
Shunts (JU1–JU20)
PCB:
*EP = Exposed pad.
—
1
MAX5386/5388/5391/5393
EVALUATION KIT+
µMAX is a registered trademark of Maxim Integrated Products,
Inc.
Component Suppliers
SUPPLIER
Murata Electronics North America, Inc.
TDK Corp.
PHONE
770-436-1300
847-803-6100
WEBSITE
www.murata-northamerica.com
www.component.tdk.com
Note: Indicate that you are using the MAX5386_, MAX5388, MAX5391, or MAX5393 when contacting these component suppliers.
MAX5386M EV Kit Files
FILE
INSTALL.EXE
MAX5386M.EXE
FTD2XX.INF
DESCRIPTION
Installs the EV kit files on the computer
Application program
USB driver file
UNINST.INI
Uninstalls the EV kit software
USB driver installation help file
USB_Driver_Help.PDF
directly from the EV kit software. Text in bold_and_under-
lined refers to items from the Windows operating system.
Quick Start
Required Equipment
Procedure
The EV kit is fully assembled and tested. Follow the steps
below to verify board operation:
•
MAX5386M EV system
MAX5386M EV kit
MINIQUSB+ command module (USB cable
included)
1)
Visit www.maxim-ic.com/evkitsoftware to down-
load the latest version of the EV kit software,
5386MRxx.ZIP. Save the EV kit software to a tem-
porary folder and uncompress the ZIP file.
•
•
User-supplied Windows 2000, Windows XP, or
Windows Vista PC with a spare USB port
2)
Install the EV kit software on the computer by run-
ning the INSTALL.EXE program inside the tempo-
rary folder. The program files are copied and icons
One or two multimeters
Note: In the following sections, software-related items
are identified by bolding. Text in bold refers to items
2_ _ _ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
MAX5386M Evaluation System
are created in the Windows Start_ |_ Programs
menu.
7)
Follow the directions of the Add_ New_ Hardware_
Wizard to install the USB device driver. Choose the
Search_for_the_best_driver_for_your_device option.
Specify the location of the device driver to be
C:\Program_Files\MAX5386M (default installation
directory) using the Browse button. During device
driver installation, Windows may show a warning
message indicating that the device driver Maxim
uses does not contain a digital signature. This is
not an error condition and it is safe to proceed
with installation. Refer to the USB_Driver_Help.PDF
document included with the software if you have
problems during this step.
3)
4)
Verify that shunts are correctly installed on the
jumpers listed in Table 1 for proper operation of the
EV kit.
Connect the multimeters across the MAX5386M’s
(U1) WA and LA PCB pads and WB and LB PCB
pads.
5)
6)
Connect the MINIQUSB+ interface board to the EV
kit J2 and J3 connectors.
Connect the included USB cable from the PC
to the MINIQUSB+ interface board. A Building_
Driver_ Database window pops up in addition to
a New_Hardware_Found message when installing
the USB driver for the first time. If a window similar
to the one described above does not appear after
30s, remove the USB cable from the board and
reconnect it. Administrator privileges are required
to install the USB device driver on Windows 2000/
XP and Windows Vista.
8)
9)
Start the EV kit software by opening its icon in the
Start_|_Programs menu.
Observe as the program automatically detects the
USB connection and starts the main program.
10) Using the Device_Connected combo box, select
MAX5386 from the list and then press the Default
button. The EV kit software main window appears,
as shown in Figure 1.
Table_1._Jumper_Configuration_for_MAX5386M_EV_Kit_Operation
JUMPER
SHUNT_POSITION
Installed
EV_KIT_FUNCTION
1.7V LDO output enabled
1.7V LDO output disabled
JU1
Not installed*
1-2
MAX5386M VDD voltage not powered
JU2
2-3*
MAX5386M VDD voltage dependent on jumper JU20 configuration
External voltage applied at the EV kit VDD and GND PCB pads
MAX5386M HA disconnected from the U1 VDD voltage source
MAX5386M HA connected to the U1 VDD voltage source
MAX5386M LA disconnected from GND
MAX5386M LA connected to GND
Not installed
Not installed*
Installed
JU3
JU4
JU5
JU6
Not installed
Installed*
Not installed*
Installed
MAX5386M HB disconnected from the U1 VDD voltage source
MAX5386M HB connected to the U1 VDD voltage source
MAX5386M LB disconnected from GND
MAX5386M LB connected to GND
Not installed
Installed*
1-2
VPOWER = 5V
JU20
1-3*
VPOWER = 3.3V
1-4
VPOWER = 2.6V
*Default position.
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ_ _ 3
MAX5386M Evaluation System
Figure 1. MAX5386M Evaluation Kit Software Main Window
4_ _ _ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
MAX5386M Evaluation System
11) The MAX5386M EV kit is now ready for additional
evaluated, the Update_ Pot_ A_ and_ B checkbox is
enabled/disabled. The EV kit enters the normal operat-
ing mode when the USB connection is detected and the
part has been selected. Since the MAX5386M does not
have read capability, all the edit boxes are set to ques-
tion marks (??) and the Potentiometerꢀ track bar is set
to mid scale. If the USB connection is not detected, the
software prompts the user to retry, exit the program, or
enter the demo mode.
testing.
See the Detailed Description of Software section for more
information on the software features.
Detailed Description of Software
Graphical User Interface (GUI) Panel
The MAX5386M EV kit software GUI shown in Figure 1 is
a Windows program that provides a convenient means
to control the MAX5386M dual potentiometer. Use the
mouse or press the Tab key to navigate through the GUI
controls. The correct SPI write operations are generated
to update the MAX5386M internal memory registers
when any of these controls are executed.
Demo Mode
The EV kit software enters the demo mode, when the
USB connection is not detected, by selecting Cancel on
the MAX5386M_Evaluation_Kit_Interface_Circuit popup
window (Figure 2). The software can also enter demo
mode at any time from the main window by selecting
the Options_|_Demo_Mode menu item. When in demo
mode, all software communication to the EV kit circuit
is disabled; however, most of the software GUI is func-
tional. Demo mode allows the user to evaluate the soft-
ware without hardware connectivity. To exit demo mode,
deselect the Options_|_Demo_Mode menu item.
The software divides the EV kit functions into group
boxes. The Interface group box indicates the EV kit
Status and the last write operation Command_ Sent
and Data_ Sent indicators. This data confirms proper
device operation. The Device_ Connected combo box
selects the Maxim part being evaluated and enables
the Update_ Pot_ A_ and_ B checkbox function when
choosing the MAX5391 or MAX5393 option from the
list. The Default button programs both potentiometers
to their midscale positions. The lower Potentiometer_A
and Potentiometer_B group boxes provide controls to
change the respective wiper positions. The main win-
dow’s bottom-left status bar provides the USB interface
circuit communication status.
Potentiometer A and B Wiper Positions
The wiper position track bars (WA, WB) in the
Potentiometer_ A and Potentiometer_ B group boxes
are used to change the wiper position between the H_
and L_ end points. Use the computer mouse or arrow
keys to move the wiper position_between the 256 posi-
tion points. The wiper position can also be changed by
entering the desired integer value in the edit boxes, or
by pressing the up or down arrows in the respective
edit box. A change in the Wꢀ wiper position_track bars,
or HWꢀ/WLꢀ edit boxes writes to the registers and the
wiper position is updated with the data sent. The wiper
position is shown in the HWꢀ and WLꢀ edit boxes. The
HWꢀ edit box shows the wiper position with respect to
the potentiometer H end point and the WLꢀ edit box
shows the wiper position with respect to the potentiom-
eter L _ end point.
The EV kit software can also be used to evaluate
the MAX5386L, MAX5386N, MAX5388, MAX5391, and
MAX5393.
Software Startup
Upon startup, the EV kit software automatically search-
es for the USB interface board’s circuit connection.
In the Interface group box, the Device_ Connected
combo box allows the user to select the proper part
being evaluated. Upon selection of the device being
Figure 2. MAX5386M Evaluation Kit Interface Circuit Popup Window
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ_ _ 5
MAX5386M Evaluation System
Factory Default
Simple SPI Commands
Pressing the Default button resets potentiometer A and
B wiper positions in the MAX5386M to the factory-default
midscale position.
There are two methods for communicating with the EV
kit, through the normal user-interface panel (Figure 1)
or through the SPI commands available by selecting
the 3-Wire_Interface (Figure 3) utility from the main pro-
gram’s Options_|_Advanced_Users Interface menu bar.
A window is displayed that allows SPI send/receive data
operations.
Status Indicator
The Status indicator in the Interface group box displays
EV_Kit_Operational when the EV kit enters the normal
operating mode after the USB connection is detected.
If the USB connection is not detected, or when the
software enters the demo mode, the Status indicator
displays Demo_Mode. Demo mode is used to exercise
the software without hardware connectivity.
On the 3-wire_interface tab, the Connection group box
defines the hardware connections of the interface. For
the EV kit, K10 is selected from the Clock_(SCK)(SCLK)
drop-down list, K12 from the Data_from_master_to_slave_
(MOSI)(DIN) drop-down list is disabled, K11 from the
Data_from_slave_to_master_(MISO)(DOUT) drop-down
list, K9 from the Chip-select_ (CS)_ for_ data_ framing
drop-down list, and Use_ standard_ connections_ for_
high-speed_SPI checkbox is checked (see Figure 3).
Command Sent Indicator
The Command_ Sent indicator in the Interface group
box displays the last command sent from the master
(software) to the MAX5386M. There are two commands
available in the MAX5386M IC. Table 2 describes the two
MAX5386M commands.
The Configuration group box allows the user to config-
ure the logic level and data rate. For the EV kit, check
the Send_&_Receive_MSB_first checkbox and verify that
the CPOL=1(clock_idle_high) and CPHA=1(sample_2nd_
edge)_checkboxes are unchecked (see Figure 3).
Data Sent Indicator
The Data_Sent indicator displays the last data sent from
the masters to potentiometer A (0x00) or potentiometer
B (0x01) registers.
The Send_and_Receive_Data group box allows the user
to send data to the MAX5386M. The Data_bytes_to_be_
written_edit box indicates data to be sent from the mas-
ter (microcontroller) to the device (MAX5386M). Eight-
bit hexadecimal numbers should be comma delimited.
Press the Send_Now button to transmit the data from the
master to the device. Data appearing in the Data_bytes_
received edit box is data read from the device. The Data_
bytes_ received edit box in the EV kit software always
shows a default value of 0xFF since the MAX5386M
does not send data back to the master.
The MAX5386M IC uses an 8-bit (MSBs, D7–D0) data
byte to set the wiper position. Refer to the MAX5386 IC
data sheet for additional information.
Keyboard Navigation
Press the Tab key to select each GUI control. The select-
ed control is indicated by a dotted outline. Using Shift
+ Tab moves the selection to the previously selected
control. Buttons respond to the keyboard’s space bar
and some controls respond to the keyboard’s up and
down arrow keys. Activate the program’s menu bar by
pressing the F10 key and then pressing the letter of the
desired menu item. Most menu items have one letter
underlined, indicating their shortcut key.
Note: The SPI dialog boxes accept numeric data in
hexadecimal format. Hexadecimal numbers must be pre-
fixed by $ or 0x. Figure 3 shows a simple SPI write-byte
operation using the included 3-wire interface diagnostics
tool. In this example, the software is sending command
0x00 (write to potentiometer A) and data 0x7F. The data
sequence sets the MAX5386M wiper position to 127.
When a number is entered into the edit boxes, it can be
sent to the device by pressing the Enter key. It is also
sent when Tab or Shift + Tab is pressed.
Table_2._MAX5386M_SPI_Command
COMMAND
MAX5386M_
REGISTER
DESCRIPTION
BINARY
HEX
SPI data is written to potentiometer A. Wiper WA position updates with
SPI data.
VREGA
VREGB
00000000
00000001
0x00
SPI data is written to potentiometer B. Wiper WB position updates with
SPI data.
0x01
6_ _ _ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
MAX5386M Evaluation System
Figure 3. Simple Low-Level 3-Wire Interface
General Troubleshooting
Problem:_Software_reports_it_cannot_find_the_interface_
circuit:
Detailed Description of Hardware
The MAX5386M evaluation kit (EV kit) is an assembled
and tested PCB that features the MAX5386M dual 50kI
digital potentiometers. Both potentiometer A and B have
an end-to-end resistance of 50kI and each wiper can be
programmed independently among 256 tap positions.
The EV kit uses a MAX5386M IC in a 16-pin thin QFN
package on a proven two-layer PCB design.
• Is the USB cable connected to the MINIQUSB+ board?
• Has Windows plug-and-play detected the board?
Bring up Control_Panel->System->Device_Manager,
and look at what device nodes are indicated for USB.
If there is an Unknown_ device_ node attached to
the USB, uninstall it—this forces plug-and-play to try
again.
The EV kit provides connector J1 to interface with the
MAX5386M CS, DIN, SCLK, and GND signals directly
to a user-supplied 3-wire system. Connector J1 also
provides a connection for the MAX5386M EV kit’s 2.6V
to 5.5V VPOWER power-supply input.
• If using an off-board SPI interface, is the power ground
connected to the EV kit ground (GND) at one of the
header J1 pin connections (J1-2, J1-4, J1-6, or J1-8)?
The EV kit is typically used with a MINIQUSB+ interface
board for communicating with a PC through the 3-wire
serial interface. Logic-level translators U7 and U8 pro-
vide proper SPI interface translation when using 2.6V to
5.5V to power the MAX5386M VDD input.
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ_ _ 7
MAX5386M Evaluation System
Jumper JU1 enables/disables LDO U5 output. Install a
EV Kit VDD Input Source
The VPOWER rail is typically supplied as 3.3V or 5V by
the MINIQUSB+ interface board circuitry, or 2.6V using
LDO regulator U6. LDO regulator U5 output is set to 1.7V
and is powered from the VPOWER rail. The VPOWER rail
sets the MAX5386M VDD input to 5V, 3.3V, or 2.6V.
shunt across jumper JU1 to enable U5 default 1.7V out-
put. Remove the shunt at JU1 to disable U5 output. See
Table 4 for proper jumper JU1configuration.
MAX5386M VDD Input Configuration
Jumper JU2 selects the power source for the MAX5386M
VDD input. Install a shunt across pins 1-2 of jumper JU7
to operate the MAX5386M VDD input power using LDO
U5 output. Install a shunt across pins 2-3 to operate the
MAX5386M VDD input from the VPOWER rail. See Table
5 for proper jumper configuration for the MAX5386M
VDD power-supply input.
Regulator U5 has an adjustable output that can be con-
figured to a different voltage by replacing resistor R1.
Use the following equation to set U5 output voltage:
VOUT
1.225
5
R1= 10 x
−1
Note: The MAX5386M VDD input has a minimum 2.6V
requirement and LDO U5 output needs to be adjusted to
power the MAX5386M VDD input.
where R1 is in ohms and VOUT is the desired U5 output
voltage.
Jumper JU20 selects the source for the EV kit circuit
VPOWER rail. See Table 3 for proper jumper configura-
tion for setting VPOWER rail.
SPI Clock, Data-, and Chip-Select Inputs
The MAX5386M features clock, data-, and chip-select
input pins for SPI-compatible communication to control
the MAX5386M wiper position. The clock, data-, and
chip-select pins can be driven by the MINIQUSB+ inter-
face circuit or the PCB header (J1), along with a user-
supplied external SPI-compatible controller. An external
SPI-compatible controller can be connected to CS
(J1-3), DIN (J1-5), SCLK (J1-7), and GND (J1-2, J1-4,
J1-6, J1-8) on header J1 to communicate with the
MAX5386M IC. When using an external SPI-compatible
controller, verify that the MINIQUSB+ interface board
has been disconnected from the EV kit’s J2 and J3 head-
ers. See Table 6 for header J1 pin assignment.
Alternatively, the EV kit’s VDD PCB pad can be used to
supply an external 2.6V to 5.25V to the circuit’s VPOWER
rail, by removing the shunt at jumper JU20.
Table_3._VPOWER_Rail_(JU20)
SHUNT_POSITION
VPOWER_Rail
5V (MINIQUSB+ circuitry)
3.3V (MINIQUSB+ circuitry)
2.6V (LDO U6)
1-2
1-3*
1-4
External source applied at EV kit
VDD and GND PCB pads
Not installed
*Default position.
Table_4._U5_LDO_Function_(JU1)
SHUNT_POSITION
U5_1.7V_OUTPUT
Installed
Enabled
Disabled
Not installed*
*Default position.
Table_5._MAX5386M_Power_Source_(JU2,_JU1,_JU20)
SHUNT_POSITION
MAX5386M_VDD_PIN
JU2
1-2
1-2
JU1
JU20
Installed
X
1.7V or adjusted U5 LDO output
Not installed
X
1-2
Not powered
5V
1-3*
3.3V
2-3*
X
1-4
2.6V
Not installed
External source applied at the EV kit VDD and GND PCB pads
*Default position.
X = Don’t care.
8_ _ _ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
MAX5386M Evaluation System
Potentiometer, Voltage-Divider, or
Note that to test the device in resistor mode, the ohmme-
ter must be GND referenced to the MAX5386M. This can
be accomplished by connecting the L_ pin to GND or
the H_ pin to U1 VDD. Resistance can then be measured
between W_ and L_ or W_ and H_ PCB pads.
Variable Resistor with Ground Reference
The EV kit provides an option to configure the MAX5386M
as a potentiometer or voltage-divider, open end, or
with ground reference, respectively. Use jumpers
JU3 and JU4 for potentiometer A, and jumpers JU5 and
JU6 for potentiometer B configurations. Tables 7 and 8 list
jumper options for configuring potentiometers A and B.
Evaluating the MAX5388, MAX5391,
and MAX5393 ICs
The EV kit is populated with additional PCB footprints
and various jumpers to evaluate the MAX5391 (U2),
MAX5393 (U3), and MAX5388 (U4), respectively.
The MAX5386M IC can also be configured as a variable
resistor by shorting the H_ and W_ pads together using
a wire. When operating as a variable resistor, any power
source connected to the H_, W_, or L_ pads must be
voltage and current limited to the maximum conditions
stated in the MAX5386 IC data sheet.
Refer to the MAX5388, MAX5391L, or MAX5393 EV sys-
tem data sheets for additional information when evaluating
the_MAX5388, MAX5391, or MAX5393 digital potentiom-
eters.
Table_6._Header_J1_Pin_Assignment
PIN
SIGNAL
VPOWER
GND
J1-1
J1-2, J1-4, J1-6, J1-8
J1-3
J1-5
J1-7
CS
DIN
SCLK
Table_7._JU3_and_JU4_Jumper_Functions_(Potentiometer_A)
SHUNT_POSITION
HA_PAD
LA_PAD
MAX5386M_FUNCTION
JU3
JU4
Not installed
Installed*
Not installed
Installed
Not connected
Connected to GND
Not connected
Potentiometer open ended
Not installed*
Not connected
Potentiometer with GND reference
Voltage-divider open ended
Connected to
U1 VDD
Installed
Connected to GND
Voltage-divider with GND reference
*Default position.
Table_8._JU5_and_JU6_Jumper_Functions_(Potentiometer_B)
SHUNT_POSITION
HB_PAD
LB_PAD
MAX5386M_FUNCTION
JU5
JU6
Not installed
Installed*
Not installed
Installed
Not connected
Connected to GND
Not connected
Potentiometer open ended
Not installed*
Not connected
Potentiometer with GND reference
Voltage-divider open ended
Connected to
U1 VDD
Installed
Connected to GND
Voltage-divider with GND reference
*Default position.
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ_ _ 9
MAX5386M Evaluation System
Table_9._Jumper_Configuration_(JU1–JU20)
JUMPER
SHUNT_POSITION
Installed
EV_KIT_FUNCTION
1.7V LDO output enabled
1.7V LDO output disabled
JU1
Not installed*
1-2
MAX5386M VDD voltage not powered
JU2
2-3*
MAX5386M VDD voltage dependent on jumper JU20 configuration
External voltage applied at the VDD and GND PCB pads
MAX5386M HA disconnected from the U1 VDD voltage source
MAX5386M HA connected to the U1 VDD voltage source
MAX5386M LA disconnected from GND
Not installed
Not installed
Installed*
Not installed
Installed*
Not installed
Installed*
Not installed
Installed*
1-2*
JU3
JU4
MAX5386M LA connected to GND
MAX5386M HB disconnected from the U1 VDD voltage source
MAX5386M HB connected to the U1 VDD voltage source
MAX5386M LB disconnected from GND
JU5
JU6
MAX5386M LB connected to GND
MAX5391 VDD voltage not powered
JU7
2-3
MAX5391 VDD voltage dependent on jumper JU20 configuration
MAX5391 HA disconnected from the U2 VDD voltage source
MAX5391 HA connected to the U2 VDD voltage source
MAX5391 LA disconnected from GND
Not installed
Installed*
Not installed
Installed*
Not installed
Installed*
Not installed
Installed*
Not installed
Installed*
Not installed
Installed*
Not installed
Installed*
Not installed
Installed*
Not installed
Installed*
Not installed
Installed*
Not installed
Installed*
Not installed
Installed*
1-2
JU8
JU9
MAX5391 LA connected to GND
MAX5391 HB disconnected from the U2 VDD voltage source
MAX5391 HB connected to the U2 VDD voltage source
MAX5391 LB disconnected from GND
JU10
JU11
JU12
JU13
JU14
JU15
JU16
JU17
JU18
JU19
MAX5391 LB connected to GND
MAX5393 HA disconnected from the U3 VDD voltage source
MAX5393 HA connected to the U3 VDD voltage source
MAX5393 LA disconnected from GND
MAX5393 LA connected to GND
MAX5393 HB disconnected from the U3 VDD voltage source
MAX5393 HB connected to the U3 VDD voltage source
MAX5393 LB disconnected from GND
MAX5393 LB connected to GND
MAX5388 LA disconnected from GND
MAX5388 LA connected to GND
MAX5388 HB disconnected from the U4 VDD voltage source
MAX5388 HB connected to the U4 VDD voltage source
MAX5388 LB disconnected from GND
MAX5388 LB connected to GND
MAX5393 VDD voltage not powered
MAX5393 VDD voltage dependent on jumper JU20 configuration
VPOWER = 5V
JU20
1-3*
VPOWER = 3.3V
1-4
VPOWER = 2.6V
*Default position.
10_ _ _ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
MAX5386M Evaluation System
Figure 4. MAX5386M EV Kit Schematic
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ_ _ 11
MAX5386M Evaluation System
1.0’’
Figure 5. MAX5386M EV Kit Component Placement Guide—Component Side
12_ _ _ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
MAX5386M Evaluation System
1.0’’
Figure 6. MAX5386M EV Kit PCB Layout—Component Side
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ_ _ 13
MAX5386M Evaluation System
1.0’’
Figure 7. MAX5386M EV Kit PCB Layout—Solder Side
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.
Maxim reserves the right to change the circuitry and specifications without notice at any time.
14_____________________ ________ Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
©
2010 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.
相关型号:
©2020 ICPDF网 联系我们和版权申明