MAX6328XR27-T [MAXIM]

3-Pin, Ultra-Low-Power SC70/SOT レP Reset Circuits; 3引脚,超低功耗SC70 / SOT μP复位电路
MAX6328XR27-T
型号: MAX6328XR27-T
厂家: MAXIM INTEGRATED PRODUCTS    MAXIM INTEGRATED PRODUCTS
描述:

3-Pin, Ultra-Low-Power SC70/SOT レP Reset Circuits
3引脚,超低功耗SC70 / SOT μP复位电路

电源电路 电源管理电路 复位电路 光电二极管
文件: 总8页 (文件大小:132K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
19-1294; Rev 3; 1/00  
3-Pin, Ultra-Low-Power SC70/SOT  
µP Reset Circuits  
General Description  
Features  
The MAX6326/MAX6327/MAX6328/MAX6346/MAX6347/  
MAX6348 microprocessor (µP) supervisory circuits moni-  
tor the power supplies in µP and digital systems. These  
devices provide excellent circuit reliability and low cost  
by eliminating external components and adjustments  
when used with 2.5V, 3V, 3.3V, and 5V powered circuits.  
Ultra-Low 1µA (max) Supply Current  
(MAX6326/MAX6327/MAX6328)  
Precision Monitoring of 2.5V, 3V, 3.3V, and 5V  
Power-Supply Voltages  
Reset Thresholds Available from 2.2V to 4.63V  
Fully Specified Over Temperature  
100ms (min) Power-On Reset Pulse Width  
Low Cost  
These circuits perform a single function: they assert a  
reset signal whenever the V  
supply voltage declines  
CC  
below a preset threshold, keeping it asserted for at least  
100ms after V has risen above the reset threshold.  
CC  
Available in Three Versions: Push-Pull RESET,  
Push-Pull RESET, and Open-Drain RESET  
The only difference between the devices is their output.  
The MAX6326/MAX6346 (push-pull) and MAX6328/  
MAX6348 (open-drain) have an active-low reset output.  
The MAX6327/MAX6347 have an active-high push-pull  
reset output. All of these parts are guaranteed to be in  
Power-Supply Transient Immunity  
No External Components  
3-Pin SC70/SOT23 Packages  
the correct state for V  
down to 1V. The reset compara-  
CC  
tor is designed to ignore fast transients on V . Reset  
Pin Compatible with MAX803/MAX809/MAX810  
CC  
thresholds are factory-trimmable between 2.2V and  
4.63V, in approximately 100mV increments. Twenty-one  
standard versions are available. Contact the factory for  
availability of nonstandard versions.  
Ordering Information  
PART  
TEMP. RANGE  
-40°C to +85°C  
-40°C to +85°C  
-40°C to +85°C  
-40°C to +85°C  
-40°C to +85°C  
-40°C to +85°C  
-40°C to +85°C  
-40°C to +85°C  
-40°C to +85°C  
-40°C to +85°C  
-40°C to +85°C  
-40°C to +85°C  
PIN-PACKAGE  
3 SC70-3  
Ultra-low supply currents (1µA max for the MAX6326/  
MAX6327/MAX6328) make these parts ideal for use in  
portable equipment. All six devices are available in  
space-saving SOT23 and SC70 packages.  
MAX6326XR_ _-T  
MAX6326UR_ _-T  
MAX6327XR_ _-T  
MAX6327UR_ _-T  
MAX6328XR_ _-T  
MAX6328UR_ _-T  
MAX6346XR_ _-T  
MAX6346UR_ _-T  
MAX6347XR_ _-T  
MAX6347UR_ _-T  
MAX6348XR_ _-T  
MAX6348UR_ _-T  
3 SOT23-3  
3 SC70-3  
3 SOT23-3  
3 SC70-3  
Applications  
Intelligent Instruments  
3 SOT23-3  
3 SC70-3  
Computers  
Controllers  
3 SOT23-3  
3 SC70-3  
Automotive  
Critical µP and µC  
Power Monitoring  
Portable/Battery-Powered  
Equipment  
3 SOT23-3  
3 SC70-3  
3 SOT23-3  
Pin Configuration  
The MAX6326/MAX6327/MAX6328/MAX6346/MAX6347/  
MAX6348 are available in factory-set V reset thresholds from  
CC  
2.2V to 4.63V, in approximately 0.1V increments. Choose the  
desired reset-threshold suffix from Table 1 and insert it in the  
blank spaces following “R.” There are 21 standard versions with  
a required order increment of 2500 pieces. Sample stock is gen-  
erally held on the standard versions only (see the Selector  
Guide). Required order increment is 10,000 pieces for nonstan-  
dard versions (Table 2). Contact factory for availability. All  
devices available in tape-and-reel only.  
TOP VIEW  
GND  
1
MAX6326  
MAX6327  
MAX6328  
MAX6346  
MAX6347  
MAX6348  
3
V
CC  
Selector Guide appears at end of data sheet.  
(RESET) RESET  
2
SOT23-3/SC70-3  
( ) ARE FOR THE MAX6327/MAX6347.  
________________________________________________________________ Maxim Integrated Products  
1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.  
For small orders, phone 1-800-835-8769.  
3-Pin, Ultra-Low-Power SC70/SOT  
µP Reset Circuits  
ABSOLUTE MAXIMUM RATINGS  
Terminal Voltage (with respect to GND)  
Continuous Power Dissipation (T = +70°C)  
A
V
...........................................................................-0.3V to +6V  
3-Pin SC70 (derate 2.7mW/°C above +70°C)...............174mW  
3-Pin SOT23 (derate 4mW/°C above +70°C)................320mW  
Operating Temperature Range ...........................-40°C to +85°C  
Storage Temperature Range.............................-65°C to +150°C  
Lead Temperature (soldering, 10s) .................................+300°C  
CC  
RESET, RESET (push-pull) .........................-0.3V to (V  
RESET (open drain)..................................................-0.3V to +6V  
Input Current (V ).............................................................20mA  
Output Current (RESET, RESET).........................................20mA  
+ 0.3V)  
CC  
CC  
Rate of Rise (V )...........................................................100V/µs  
CC  
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional  
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to  
absolute maximum rating conditions for extended periods may affect device reliability.  
ELECTRICAL CHARACTERISTICS  
(V  
= full range, T = -40°C to +85°C, unless otherwise noted. Typical values are at T = +25°C and V  
= 3V.) (Note 1)  
CC  
A
A
CC  
PARAMETER  
SYMBOL  
CONDITIONS  
= 0°C to +70°C  
MIN  
1.0  
TYP  
MAX  
5.5  
UNITS  
T
T
A
V
CC  
Range  
V
= -40°C to +85°C  
1.2  
5.5  
A
MAX632_ only, V = 3.0V for V 2.93V,  
CC  
CC  
TH  
0.5  
1.0  
1.0  
V
= 3.2V for V > 2.93V, no load  
TH  
Supply Current  
I
µA  
V
CC  
V
CC  
= 5.5V, no load  
1.75  
V
1.5%  
-
V
1.5%  
+
TH  
TH  
T
T
= +25°C  
V
A
TH  
Reset Threshold  
V
Table 1  
TH  
V
TH  
-
V
TH  
+
= -40°C to +85°C  
V
TH  
A
2.5%  
2.5%  
Reset Threshold Tempco  
V /°C  
40  
20  
ppm/°C  
µs  
TH  
V
CC  
to Reset Delay  
V = V to (V - 100mV)  
CC TH TH  
Reset Active Timeout Period  
100  
185  
280  
0.3  
ms  
RESET Output Voltage  
(MAX6326/MAX6328/  
MAX6346/MAX6348)  
I
I
= 1.6mA, V  
= 100µA, V  
> 2.1V, reset asserted  
SINK  
CC  
V
V
V
OL  
1.2V, reset asserted  
0.4  
SINK  
CC  
I
I
I
= 500µA, V  
= 800µA, V  
= 800µA, V  
= 500µA, V  
= 3.2V, MAX6326 only  
0.8 · V  
0.8 · V  
0.8 · V  
0.8 · V  
0.8 · V  
SOURCE  
SOURCE  
SOURCE  
CC  
CC  
CC  
CC  
CC  
RESET Output Voltage  
(MAX6326/MAX6346)  
V
V
= 4.5V, V 4.38V  
TH  
OH  
CC  
CC  
CC  
CC  
= V , V 4.5V  
TH(MAX) TH  
I
2.1V, reset asserted  
1.2V, reset asserted  
SOURCE  
SOURCE  
OH  
I
= 50µA, V  
CC  
I
= 1.2mA, V  
3.2V, reset not asserted,  
SINK  
CC  
0.3  
RESET Output Voltage  
(MAX6327/MAX6347)  
MAX6327 only  
V
V
OL  
I
= 3.2mA, V  
4.5V, reset not asserted,  
SINK  
CC  
0.4  
0.4  
V
4.38V  
TH  
I
= 3.2mA, V  
= V , V 4.5V  
TH(MAX) TH  
SINK  
CC  
MAX6326/MAX6327/MAX6328  
MAX6346/MAX6347/MAX6348  
6.3  
9.5  
RESET Threshold  
Hysteresis  
mV  
µA  
Open-Drain RESET Output  
Leakage Current  
0.1  
Note 1: Overtemperature limits are guaranteed by design and not production tested.  
2
_______________________________________________________________________________________  
3-Pin, Ultra-Low-Power SC70/SOT  
µP Reset Circuits  
__________________________________________Typical Operating Characteristics  
(T = +25°C, unless otherwise noted.)  
A
POWER-DOWN RESET DELAY  
vs. TEMPERATURE  
SUPPLY CURRENT vs. TEMPERATURE  
1.0  
0.9  
0.8  
0.7  
0.6  
0.5  
0.4  
0.3  
0.2  
0.1  
0
200  
150  
V
= 5V  
CC  
V
= 3.3V  
CC  
100  
50  
0
V
= 20mV  
OD  
V
= 10mV  
OD  
V
OD  
= 100mV  
V
= 1.2V  
20  
CC  
V
= 200mV  
40  
OD  
-40  
-20  
0
20  
60  
80  
-40 -20  
0
40  
60  
80  
TEMPERATURE (°C)  
TEMPERATURE (°C)  
POWER-UP RESET TIMEOUT  
vs. TEMPERATURE  
MAXIMUM TRANSIENT DURATION  
vs. RESET THRESHOLD OVERDRIVE (SC70)  
210  
500  
400  
300  
200  
100  
0
200  
190  
180  
170  
160  
150  
140  
130  
-40 -20  
0
20  
40  
60  
80  
1
10  
RESET THRESHOLD OVERDRIVE,  
- V (mV)  
100  
1000  
TEMPERATURE (°C)  
V
TH  
CC  
______________________________________________________________Pin Description  
PIN  
NAME  
FUNCTION  
MAX6326/MAX6346  
MAX6328/MAX6348  
MAX6327  
MAX6347  
1
1
GND  
Ground  
Active-Low Reset Output. RESET remains low while V  
is below the reset  
CC  
threshold and for at least 100ms after V  
RESET is open-drain on the MAX6328/MAX6348 and push-pull on the  
rises above the reset threshold.  
CC  
2
RESET  
MAX6326/MAX6346.  
Active-High Reset Output. RESET remains high while V  
is below the reset  
CC  
3
2
3
RESET  
threshold and for at least 100ms after V  
rises above the reset threshold.  
CC  
V
CC  
Supply Voltage  
_______________________________________________________________________________________  
3
3-Pin, Ultra-Low-Power SC70/SOT  
µP Reset Circuits  
____________ Applications Information  
V
CC  
Interfacing to µPs with  
Bidirectional Reset Pins  
V
V
CC  
CC  
Since the RESET output on the MAX6328/MAX6348 is  
open drain, these devices interface easily with micro-  
processors (µPs) that have bidirectional reset pins,  
such as the Motorola 68HC11. Connecting the µP  
supervisor’s RESET output directly to the microcon-  
troller’s (µC’s) RESET pin with a single pull-up resistor  
allows either device to assert reset (Figure 1).  
µP  
MAX6328  
MAX6348  
MOTOROLA  
68HCXX  
RESET  
INPUT  
RESET  
Negative-Going V  
Transients  
CC  
GND  
GND  
In addition to issuing a reset to the µP during power-up,  
power-down, and brownout conditions, these devices  
are relatively immune to short-duration, negative-going  
V
transients (glitches).  
CC  
Figure 1. Interfacing to µPs with Bidirectional Reset Pins  
The Typical Operating Characteristics show the Maxi-  
mum Transient Duration vs. Reset Threshold Overdrive  
graph, for which reset pulses are not generated. The  
graph shows the maximum pulse width that a negative-  
going V  
transient may typically have when issuing a  
CC  
reset signal. As the amplitude of the transient increas-  
es, the maximum allowable pulse width decreases.  
Table 1. Factory-Trimmed Reset Thresholds  
RESET THRESHOLD VOLTAGE, V (V)  
TH  
PART  
SUFFIX  
T
A
= +25°C  
T = -40°C to +85°C  
A
MIN  
TYP  
MAX  
2.233  
2.355  
2.436  
2.537  
2.669  
2.741  
2.842  
2.974  
3.045  
3.126  
3.350  
3.451  
3.552  
3.654  
3.755  
3.857  
MIN  
MAX  
MAX632_ _R  
MAX632_ _R  
MAX632_ _R  
MAX632_ _R  
MAX632_ _R  
MAX632_ _R  
MAX632_ _R  
MAX632_ _R  
MAX632_ _R  
MAX632_ _R  
MAX634_ _R  
MAX634_ _R  
MAX634_ _R  
MAX634_ _R  
MAX634_ _R  
MAX634_ _R  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
33  
34  
35  
36  
37  
38  
2.167  
2.285  
2.364  
2.462  
2.591  
2.660  
2.758  
2.886  
2.955  
3.034  
3.250  
3.349  
3.447  
3.546  
3.644  
3.743  
2.200  
2.320  
2.400  
2.500  
2.630  
2.700  
2.800  
2.930  
3.000  
3.080  
3.300  
3.400  
3.500  
3.600  
3.700  
3.800  
2.145  
2.262  
2.340  
2.437  
2.564  
2.633  
2.730  
2.857  
2.925  
3.003  
3.217  
3.315  
3.412  
3.510  
3.607  
3.705  
2.250  
2.375  
2.460  
2.562  
2.696  
2.768  
2.870  
3.000  
3.075  
3.150  
3.383  
3.485  
3.587  
3.690  
3.792  
3.895  
Factory-trimmed reset thresholds are available in approximately 100mV increments with a 1.5% room-temperature variance.  
4
_______________________________________________________________________________________  
3-Pin, Ultra-Low-Power SC70/SOT  
µP Reset Circuits  
Table 1. Factory-Trimmed Reset Thresholds(continued)  
RESET THRESHOLD VOLTAGE, V (V)  
TH  
PART  
SUFFIX  
T = +25°C  
A
T
A
= -40°C to +85°C  
MIN  
TYP  
MAX  
3.958  
4.060  
4.161  
4.263  
4.364  
4.446  
4.567  
4.699  
MIN  
MAX  
MAX634_ _R  
MAX634_ _R  
MAX634_ _R  
MAX634_ _R  
MAX634_ _R  
MAX634_ _R  
MAX634_ _R  
MAX634_ _R  
39  
40  
41  
42  
43  
44  
45  
46  
3.841  
3.940  
4.038  
4.137  
4.235  
4.314  
4.432  
4.560  
3.900  
4.000  
4.100  
4.200  
4.300  
4.380  
4.500  
4.630  
3.802  
3.900  
3.997  
4.095  
4.192  
4.270  
4.387  
4.514  
3.997  
4.100  
4.202  
4.305  
4.407  
4.489  
4.612  
4.746  
Factory-trimmed reset thresholds are available in approximately 100mV increments with a 1.5% room-temperature variance.  
Table 2. Device Marking Codes and Minimum Order Increments  
ORDER  
INCREMENT  
(k)  
ORDER  
INCREMENT  
(k)  
TOP MARK  
TOP MARK  
PART  
PART  
SOT23  
SC70  
SOT23  
SC70  
MAX6346_R46-T  
MAX6346_R45-T  
MAX6346_R44-T  
MAX6346_R43-T  
MAX6346_R42-T  
MAX6346_R41-T  
MAX6346_R40-T  
MAX6346_R39-T  
MAX6346_R38-T  
MAX6346_R37-T  
MAX6346_R36-T  
MAX6346_R35-T  
MAX6346_R34-T  
MAX6346_R33-T  
MAX6326_R31-T  
MAX6326_R30-T  
MAX6326_R29-T  
MAX6326_R28-T  
MAX6326_R27-T  
MAX6326_R26-T  
MAX6326_R25-T  
MAX6326_R24-T  
MAX6326_R23-T  
MAX6326_R22-T  
FZBI  
FZBH  
FZBG  
FZBF  
FZBE  
FZBD  
FZBC  
FZBB  
FZBA  
FZAZ  
FZAY  
FZAX  
FZAW  
FZAV  
FDAA  
FEAA  
FCAA  
FBAA  
FAAA  
EZAA  
EYAA  
EXAA  
EWAA  
EHAA  
ACO  
2.5  
10  
2.5  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
2.5  
10  
2.5  
10  
10  
2.5  
10  
10  
2.5  
2.5  
MAX6347_R46-T  
MAX6347_R45-T  
MAX6347_R44-T  
MAX6347_R43-T  
MAX6347_R42-T  
MAX6347_R41-T  
MAX6347_R40-T  
MAX6347_R39-T  
MAX6347_R38-T  
MAX6347_R37-T  
MAX6347_R36-T  
MAX6347_R35-T  
MAX6347_R34-T  
MAX6347_R33-T  
MAX6327_R31-T  
MAX6327_R30-T  
MAX6327_R29-T  
MAX6327_R28-T  
MAX6327_R27-T  
MAX6327_R26-T  
MAX6327_R25-T  
MAX6327_R24-T  
MAX6327_R23-T  
MAX6327_R22-T  
FZBW  
FZBV  
FZBU  
FZBT  
FZBS  
FZBR  
FZBQ  
FZBP  
FZBO  
FZBN  
FZBM  
FZBL  
FZBK  
FZBJ  
FMAA  
FNAA  
FLAA  
FKAA  
FJAA  
FIAA  
ACF  
2.5  
10  
2.5  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
2.5  
10  
2.5  
10  
10  
2.5  
10  
10  
2.5  
2.5  
ACK  
ACL  
ACE  
ACT  
ACP  
ACS  
ACI  
ACR  
FHAA  
FGAA  
FFAA  
EIAA  
ACH  
AAH  
ACQ  
AAI  
_______________________________________________________________________________________  
5
3-Pin, Ultra-Low-Power SC70/SOT  
µP Reset Circuits  
Table 2. Device Marking Codes and Minimum Order Increments (continued)  
ORDER  
INCREMENT  
(k)  
ORDER  
INCREMENT  
(k)  
TOP MARK  
TOP MARK  
PART  
PART  
SOT23  
SC70  
SOT23  
SC70  
MAX6348_R46-T  
MAX6348_R45-T  
MAX6348_R44-T  
MAX6348_R43-T  
MAX6348_R42-T  
MAX6348_R41-T  
MAX6348_R40-T  
MAX6348_R39-T  
MAX6348_R38-T  
MAX6348_R37-T  
MAX6348_R36-T  
MAX6348_R35-T  
FZCK  
FZCJ  
FZCI  
ACN  
2.5  
10  
2.5  
10  
10  
10  
10  
10  
10  
10  
10  
10  
MAX6348_R34-T  
MAX6348_R33-T  
MAX6328_R31-T  
MAX6328_R30-T  
MAX6328_R29-T  
MAX6328_R28-T  
MAX6328_R27-T  
MAX6328_R26-T  
MAX6328_R25-T  
MAX6328_R24-T  
MAX6328_R23-T  
MAX6328_R22-T  
FZBY  
FZBX  
FVAA  
FWAA  
FUAA  
FTAA  
FSAA  
FRAA  
FQAA  
FPAA  
FOAA  
EJAA  
10  
10  
ACM  
ACW  
2.5  
10  
FZCH  
FZCG  
FZCF  
FZCE  
FZCD  
FZCC  
FZCB  
FZCA  
FZBZ  
ACV  
2.5  
10  
10  
ACJ  
2.5  
10  
10  
ACU  
AAJ  
2.5  
2.5  
___________________Chip Information  
Selector Guide  
(standard versions*)  
TRANSISTOR COUNT: 419  
NOMINAL V  
(V)  
TH  
PART  
MAX634_ _R46-T  
4.63  
4.38  
3.08  
2.93  
2.63  
2.32  
2.20  
MAX634_ _R44-T  
MAX632_ _R31-T  
MAX632_ _R29-T  
MAX632_ _R26-T  
MAX632_ _R23-T  
MAX632_ _R22-T  
*Sample stock is generally held on all standard versions.  
6
_______________________________________________________________________________________  
3-Pin, Ultra-Low-Power SC70/SOT  
µP Reset Circuits  
________________________________________________________Package Information  
_______________________________________________________________________________________  
7
3-Pin, Ultra-Low-Power SC70/SOT  
µP Reset Circuits  
Package Information (continued)  
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are  
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.  
8 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600  
© 2000 Maxim Integrated Products  
Printed USA  
is a registered trademark of Maxim Integrated Products.  

相关型号:

MAX6328XR28+T

Power Supply Support Circuit, Fixed, 1 Channel, +2.8VV, PDSO3, LEAD FREE, SC-70, 3 PIN
MAXIM

MAX6328XR28-T

3-Pin, Ultra-Low-Power SC70/SOT レP Reset Circuits
MAXIM

MAX6328XR29-T

3-Pin, Ultra-Low-Power SC70/SOT レP Reset Circuits
MAXIM

MAX6328XR30-T

3-Pin, Ultra-Low-Power SC70/SOT レP Reset Circuits
MAXIM

MAX6328XR31+

Power Supply Support Circuit, Fixed, 1 Channel, PDSO3, LEAD FREE, EIAJ, SC-70, 3 PIN
MAXIM

MAX6328XR31+T

Power Supply Support Circuit, Fixed, 1 Channel, +3.1VV, CMOS, PDSO3, LEAD FREE, SC-70, 3 PIN
MAXIM

MAX6328XR31-T

3-Pin, Ultra-Low-Power SC70/SOT レP Reset Circuits
MAXIM

MAX6328XR32-T

3-Pin, Ultra-Low-Power SC70/SOT レP Reset Circuits
MAXIM

MAX6328XR33+T

Power Supply Support Circuit, Fixed, 1 Channel, PDSO3, LEAD FREE, SC-70, 3 PIN
MAXIM

MAX6328XR33-T

3-Pin, Ultra-Low-Power SC70/SOT レP Reset Circuits
MAXIM

MAX6328XR34-T

3-Pin, Ultra-Low-Power SC70/SOT レP Reset Circuits
MAXIM

MAX6328XR35-T

3-Pin, Ultra-Low-Power SC70/SOT レP Reset Circuits
MAXIM