MAX6407BS33+ [MAXIM]
Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PBGA4, LEAD FREE, BUMP, UCSP-4;型号: | MAX6407BS33+ |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PBGA4, LEAD FREE, BUMP, UCSP-4 信息通信管理 |
文件: | 总8页 (文件大小:141K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
19-2041; Rev 1; 8/01
X
Voltage Detectors in 4-Bump (2 2)
Chip-Scale Package
General Description
Features
The MAX6406–MAX6411 is a family of ultra-low power
circuits used for monitoring battery, power-supply, and
regulated system voltages. Each detector contains a
precision bandgap reference comparator and is
trimmed to specified trip threshold voltages. These
devices provide excellent circuit reliability and low cost
by eliminating external components and adjustments
when monitoring system voltages from 2.5V to 5.0V. A
manual reset input is also included.
X
ꢀ Tiny 4-Bump (2 2) Chip-Scale Package, (Package
Pending Full Qualification—Expected Completion
Date 6/30/01. See UCSP Reliability Section for
More Details.)
ꢀ 70% Smaller Than SC70 Packages
ꢀ Ultra-Low 500nA Supply Current
(MAX6406/MAX6407/MAX6408)
ꢀ Factory-Trimmed Reset Thresholds from 2.20V to
The MAX6406–MAX6411 assert a signal whenever the
CC
4.63V in Approximately 100mV Increments
V
supply voltage falls below a preset threshold.
These devices are differentiated by their output logic
configurations and preset threshold voltages. The
MAX6406/MAX6409 (push-pull) and the MAX6408/
MAX6411 (open-drain) have an active-low output (OUT
ꢀ
2.5% Threshold Accuracy (-40ꢀC to ꢁ85ꢀC)
ꢀ Manual Reset Input
ꢀ Guaranteed OUT Valid to V
= 1.0V
CC
is logic low when V
is below V ). The MAX6407/
TH
CC
ꢀ Three Reset Output Logic Options: Active-Low
Push-Pull, Active-High Push-Pull, and Active-Low
Open-Drain
MAX6410 have an active-high push-pull output (OUT
is logic high when V is below V ). All parts are
CC
TH
guaranteed to be in the correct output logic state for
V
down to 1V. The detector is designed to ignore
CC
ꢀ Immune to Short V
Transients
CC
fast transients on V . The MAX6406/MAX6407/
CC
MAX6408 have voltage thresholds between 2.20V and
3.08V in approximately 100mV increments. The
MAX6409/MAX6410/MAX6411 have voltage thresholds
between 3.30V and 4.63V in approximately 100mV
increments.
ꢀ No External Components
Ordering Information
PART
TEMP. RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
UCSP-4
Ultra-low supply current of 500nA (MAX6406/MAX6407/
MAX6408) makes these parts ideal for use in portable
equipment. These devices are available in 4-bump
chip-scale packages (UCSP).
MAX6406BS_ _-T
MAX6407BS_ _-T
MAX6408BS_ _-T
MAX6409BS_ _-T
MAX6410BS_ _-T
MAX6411BS_ _-T
UCSP-4
UCSP-4
UCSP-4
Applications
UCSP-4
Portable/Battery-Powered Equipment
UCSP-4
Cell Phones
PDAs
The MAX6406–MAX6411 are available in factory-set V
CC
detector thresholds from 2.20V to 4.63V, in approximately 0.1V
increments. Choose the desired threshold suffix from Table 1
and insert it in the blank space following “S”. There are 21
standard versions with a required order increment of 2500
pieces. Sample stock is generally held on the standard ver-
sions only (Table1). Required order increment is 10,000 pieces
for nonstandard versions (Table 2). Contact factory for avail-
ability. All devices available in tape-and-reel only.
MP3 Players
Pagers
Selector Guide
NOMINAL
PART
OUT/OUT Output Type
V
(V)
TH
UCSP reliability is integrally linked to the user’s assembly
methods, circuit board material, and environment. Refer to the
UCSP Reliability Notice in the UCSP Reliability section of this
data sheet for more information.
MAX6406
MAX6407
MAX6408
MAX6409
MAX6410
MAX6411
2.20 to 3.08
2.20 to 3.08
2.20 to 3.08
3.30 to 4.63
3.30 to 4.63
3.30 to 4.63
Push-Pull, Active-Low
Push-Pull, Active-High
Open-Drain, Active-Low
Push-Pull, Active-Low
Push-Pull, Active-High
Open-Drain, Active-Low
Pin Configuration appears at end of data sheet.
UCSP is a trademark of Maxim Integrated Products, Inc.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
X
Voltage Detectors in 4-Bump (2 2)
Chip-Scale Package
ABSOLUTE MAXIMUM RATINGS
All voltages measured to GND unless otherwise noted.
Continuous Power Dissipation (T = +70°C)
A
VCC ..........................................................................-0.3V to +6V
4-Pin/Bump UCSP (derate 3.8mW/°C above +70°C)....303mW
OUT/OUT ...................................................-0.3V to (V
+ 0.3V)
Operating Temperature Range ..........................-40°C to +85°C
Junction Temperature......................................................+150°C
Storage Temperature Range ............................-65°C to +160°C
Bump Reflow Temperature .............................................+235°C
CC
OUT (open-drain) .....................................................-0.3V to +6V
MR ..............................................................-0.3V to (V + 0.3V)
CC
Input/Output Current into Any Pin.......................................20mA
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V
= 1.0V to 5.5V, T = -40°C to +85°C, unless otherwise noted. Typical values are at V
= 3V and T = +25°C.) (Note1)
CC A
CC
A
PARAMETER
SYMBOL
CONDITIONS
= 0°C to +70°C
MIN
1.0
TYP
MAX
5.5
UNITS
T
T
A
A
Supply Voltage Range
Supply Current
V
V
CC
CC
= -40°C to +85°C
1.2
5.5
MAX6406/MAX6407/MAX6408
V
V
= 3.0V for V ≤ 2.93V,
= 3.2V for V > 2.93V, no load
TH
0.5
1.0
1.0
CC
CC
TH
I
µA
V
V
= 5.5V, no load
1.75
CC
T
T
= +25°C
V
- 1.5%
V V
TH TH
+ 1.5%
+ 2.5%
A
A
TH
Detector Threshold
V
Table 1
TH
= -40°C to +85°C
V
- 2.5%
V
V
TH
TH TH
MAX6406/MAX6407/MAX6408
MAX6409/MAX6410/MAX6411
6.3
Voltage Threshold Hysteresis
Detector Threshold Tempco
mV
9.5
∆V /°C
40
ppm/°C
TH
V
0.8
IL
V
V
> 4.0V
TH
TH
V
2.0
IH
MR Input
V
V
0.2 x V
CC
IL
≤ 4.0V
V
0.7 x V
1
IH
CC
MR Minimum Input Pulse Width
MR Glitch Rejection
t
µs
ns
ns
kΩ
MD
100
200
50
MR to OUT/OUT Delay
MR Pullup Resistance
25
75
V
V
V
= (V + 100mV) to (V - 100mV)
20
CC
CC
CC
TH
TH
Propagation Delay
Startup Time
µs
µs
= (V - 100mV) to (V + 100mV)
42
TH
TH
= 0 to V (min)
88
TH
OUT Output Voltage Low
(MAX6406/MAX6408/MAX6409/
MAX6411)
I
= 1.6mA, V
= 100µA, V
≥ 2.1V, OUT asserted
≥ 1.2V, OUT asserted
0.3
0.4
SINK
CC
CC
V
V
OL
I
I
SINK
= 500µA, V
= 3.2V, MAX6406,
SOURCE
CC
0.8 x V
0.8 x V
0.8 x V
CC
CC
CC
OUT not asserted
OUT Output Voltage High
(MAX6406/MAX6409)
I
V
= 800µA, V
SOURCE
= 4.5V,
CC
V
V
OH
≤ 4.38V, OUT not asserted
TH
I
V
= 800µA, V
= V (max),
CC TH
SOURCE
≥ 4.5V, OUT not asserted
TH
2
_______________________________________________________________________________________
X
Voltage Detectors in 4-Bump (2 2)
Chip-Scale Package
ELECTRICAL CHARACTERISTICS (continued)
(V
= 1.0V to 5.5V, T = -40°C to +85°C, unless otherwise noted. Typical values are at V
= 3V and T = +25°C.) (Note1)
CC A
CC
A
PARAMETER
SYMBOL
CONDITIONS
= 500µA, V ≥ 2.1V, OUT
MIN
TYP
MAX
UNITS
I
SOURCE
CC
0.8 x V
CC
CC
asserted
V
OH
I
= 50µA, V
≥ 1.2V, OUT
SOURCE
CC
0.8 x V
asserted
OUT Output Voltage
(MAX6407/MAX6410)
I
= 1.2mA, V
≥ 3.2V, OUT not
CC
SINK
0.3
0.4
0.4
0.1
V
asserted, MAX6407 only
I
= 3.2mA, V ≥ 4.5V, OUT not
SINK
CC
V
OL
asserted, V ≤ 4.38V
TH
I
V
= 3.2mA, V
≥ 4.5V, OUT not asserted
= V (max),
CC TH
SINK
TH
Open-Drain OUT Output
Leakage Current (Note 2)
OUT not asserted
µA
Note 1: Production testing done at +25°C only. Overtemperature limits are guaranteed by design and not production tested.
Note 2: Guaranteed by design.
Typical Operating Characteristics
(T = +25°C, unless otherwise noted.)
A
PROPAGATION DELAY (V FALLING)
CC
SUPPLY CURRENT vs. TEMPERATURE
vs. TEMPERATURE
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
250
200
150
100
50
V
= OVERDRIVE VOLTAGE
OD
V
= 5V
CC
CC
V
= 3.3V
V
= 10mV
OD
V
OD
= 100mV
V
= 20mV
OD
V
OD
= 200mV
V
CC
= 1.2V
20
0
-40
-20
0
40
60
80
-40
-20
0
20
40
60
80
TEMPERATURE (°C)
TEMPERATURE (°C)
_______________________________________________________________________________________
3
X
Voltage Detectors in 4-Bump (2 2)
Chip-Scale Package
Typical Operating Characteristics (continued)
(T = +25°C, unless otherwise noted.)
A
PROPAGATION DELAY (V RISING)
MAXIMUM TRANSIENT DURATION
vs. THRESHOLD OVERDRIVE
CC
vs. TEMPERATURE
500
140
120
100
80
OUT/OUT IS ASSERTED ABOVE LINE
V
= OVERDRIVE VOLTAGE
= 10mV
OD
V
OD
400
300
200
100
0
V
= 20mV
OD
OD
OD
60
V
V
= 100mV
= 200mV
40
20
0
1
10
100
1000
-40
-20
0
20
40
60
80
THRESHOLD OVERDRIVE V - V (mV)
TEMPERATURE (°C)
TH
CC
Pin Description
PIN
NAME
FUNCTION
MAX6406/MAX6408
MAX6409/MAX6411
MAX6407/MAX6410
A1
A1
GND
Ground
Active-Low Output. OUT remains low while V
is below the threshold.
CC
B1
—
OUT
OUT is open-drain on the MAX6408/MAX6411 and push-pull on the
MAX6406/MAX6409.
Active-High Output. OUT remains high while V
threshold.
is below the
CC
—
B1
OUT
Active-Low Manual Reset. Internal 50kΩ pullup to V . Pull low to
CC
assert the output. OUT remains asserted as long as MR is low. Leave
B2
A2
B2
A2
MR
unconnected or connect to V
if unused.
CC
V
Supply Voltage and Input for the Voltage Detector.
CC
4
_______________________________________________________________________________________
X
Voltage Detectors in 4-Bump (2 2)
Chip-Scale Package
Table 1. Factory-Trimmed Thresholds
Threshold Voltage, V (V)
TH
PART
SUFFIX
T
= +25°C
T
= -40°C to +85°C
A
A
MIN
TYP
MAX
2.233
2.355
2.436
2.537
2.669
2.741
2.842
2.974
3.045
3.126
3.350
3.451
3.552
3.654
3.755
3.857
3.958
4.060
4.161
4.263
4.364
4.446
4.567
4.699
MIN
MAX
22*
23*
24
2.167
2.285
2.364
2.462
2.591
2.660
2.758
2.886
2.955
3.034
3.250
3.349
3.447
3.546
3.644
3.743
3.841
3.940
4.038
4.137
4.235
4.314
4.432
4.560
2.200
2.320
2.400
2.500
2.630
2.700
2.800
2.930
3.000
3.080
3.300
3.400
3.500
3.600
3.700
3.800
3.900
4.000
4.100
4.200
4.300
4.380
4.500
4.630
2.145
2.262
2.340
2.437
2.564
2.633
2.730
2.857
2.925
3.003
3.217
3.315
3.412
3.510
3.607
3.705
3.802
3.900
3.997
4.095
4.192
4.270
4.387
4.514
2.250
2.375
2.460
2.562
2.692
2.768
2.870
3.000
3.075
3.150
3.383
3.485
3.587
3.690
3.792
3.895
3.997
4.100
4.202
4.305
4.407
4.489
4.612
4.746
25
MAX6406BS
MAX6407BS
MAX6408BS
26*
27
28
29*
30
31*
33
34
35
36
37
38
MAX6409BS
MAX6410BS
MAX6411BS
39
40
41
42
43
44*
45
46*
Factory-trimmed voltage thresholds are available in approximately 100mV increments with a 1.5% room temperature variance.
Note: Parts marked with an asterisk (*) are standard versions.
_______________________________________________________________________________________
5
X
Voltage Detectors in 4-Bump (2 2)
Chip-Scale Package
Table 2. Device Marking Codes
PART
TOP MARK
AEF
PART
TOP MARK
AEP
PART
TOP MARK
AEZ
MAX6407BS31-T
MAX6407BS30-T
MAX6407BS29-T
MAX6407BS28-T
MAX6407BS27-T
MAX6407BS26-T
MAX6407BS25-T
MAX6407BS24-T
MAX6407BS23-T
MAX6407BS22-T
MAX6408BS31-T
MAX6408BS30-T
MAX6408BS29-T
MAX6408BS28-T
MAX6408BS27-T
MAX6408BS26-T
MAX6408BS25-T
MAX6408BS24-T
MAX6408BS23-T
MAX6408BS22-T
MAX6406BS31-T
MAX6406BS30-T
MAX6406BS29-T
MAX6406BS28-T
MAX6406BS27-T
MAX6406BS26-T
MAX6406BS25-T
MAX6406BS24-T
MAX6406BS23-T
MAX6406BS22-T
AEO
AEN
AEY
AEE
AEX
AED
AEM
AEL
AEW
AEV
AEC
AEB
AEK
AEU
AEA
AEJ
AET
ADZ
AEI
AES
ADY
AEH
AER
ADX
AEG
AEQ
ADW
PART
TOP MARK
AAX
PART
TOP MARK
ABL
PART
TOP MARK
AFN
AFM
AFL
MAX6410BS46-T
MAX6410BS45-T
MAX6410BS44-T
MAX6410BS43-T
MAX6410BS42-T
MAX6410BS41-T
MAX6410BS40-T
MAX6410BS39-T
MAX6410BS38-T
MAX6410BS37-T
MAX6410BS36-T
MAX6410BS35-T
MAX6410BS34-T
MAX6410BS33-T
MAX6411BS46-T
MAX6411BS45-T
MAX6411BS44-T
MAX6411BS43-T
MAX6411BS42-T
MAX6411BS41-T
MAX6411BS40-T
MAX6411BS39-T
MAX6411BS38-T
MAX6411BS37-T
MAX6411BS36-T
MAX6411BS35-T
MAX6411BS34-T
MAX6411BS33-T
MAX6409BS46-T
MAX6409BS45-T
MAX6409BS44-T
MAX6409BS43-T
MAX6409BS42-T
MAX6409BS41-T
MAX6409BS40-T
MAX6409BS39-T
MAX6409BS38-T
MAX6409BS37-T
MAX6409BS36-T
MAX6409BS35-T
MAX6409BS34-T
MAX6409BS33-T
AAW
AAV
ABK
ABJ
AAU
AAT
ABI
AFK
ABH
ABG
ABF
AFJ
AAS
AFI
AAR
AFH
AFG
AFF
AAQ
AAP
ABE
ABD
ABC
ABB
ABA
AAZ
AAO
AAN
AAM
AAL
AFE
AFD
AFC
AFB
AAK
AAY
AFA
Detailed Description
Applications Information
Manual Reset Input
Interfacing to Different Logic
Voltage Components
Many µP-based products require manual reset capabil-
ity, allowing the operator, a test technician, or external
logic circuit to initiate a reset. A logic low on MR asserts
OUT/OUT. OUT/OUT remains asserted while MR is low.
This input has an internal 50kΩ pullup resistor, so it can
be left open if it is not used. MR can be driven with TTL
or CMOS logic levels, or with open-drain/collector out-
puts. Connect a normally open momentary switch from
MR to GND to create a manual reset function. If MR is
driven from long cables or if the device is used in a
noisy environment, connect a 0.1µF capacitor from MR
to ground to provide additional noise immunity.
The MAX6408/MAX6411 have an active-low, open-
drain output. This output structure will sink current
when OUT is asserted. Connect a pullup resistor from
OUT to any supply voltage up to 5.5V (Figure 1). Select
a resistor value large enough to allow a valid logic low
(see Electrical Characteristics), and small enough to
register a logic high while supplying all input currents
and leakage paths connected to the OUT line.
6
_______________________________________________________________________________________
X
Voltage Detectors in 4-Bump (2 2)
Chip-Scale Package
V
V
REGULATED 3.0V
IN
OUT
DC/DC
CONVERTER
V
CC
3.6V
Li+
µP
MAX6408/
MAX6411
(OPEN-DRAIN)
V
CC
OUT
SUSPEND
MR
GND
Figure 1. Interfacing to Different Logic Voltage Components
Negative-Going V
Transients
CC
These devices are relatively immune to short-duration,
negative-going V transients (glitches).
Chip Information
Pin Configuration
TRANSISTOR COUNT: 512
PROCESS: BiCMOS
CC
The Typical Operating Characteristics show the
Maximum Transient Duration vs. Threshold Overdrive
graph, for which output pulses are not generated. The
graph shows the maximum pulse width that a negative-
going V
transient may typically have before the
CC
devices issue output signals. As the amplitude of the
transient increases, the maximum allowable pulse width
decreases.
UCSP Reliability
The chip-scale package (UCSP) represents a unique
packaging form factor that may not perform equally to a
packaged product through traditional mechanical reliabil-
ity tests. CSP reliability is integrally linked to the user’s
assembly methods, circuit board material, and usage
environment. The user should closely review these areas
when considering use of a CSP package. Performance
through Operating Life Test and Moisture Resistance
remains uncompromised as it is primarily determined by
the wafer-fabrication process.
TOP VIEW AFTER ASSEMBLED ON PC BOARD (BUMPS AT THE BOTTOM)
V
GND
A1
CC
MAX6406-
MAX6411
A2
45 MIL
OUT (OUT)
B1
MR
B2
45 MIL
UCSP
Mechanical stress performance is a greater considera-
tion for a CSP package. CSPs are attached through
direct solder contact to the user’s PC board, foregoing
the inherent stress relief of a packaged product lead
frame. Solder joint contact integrity must be considered.
Information on Maxim’s qualification plan, test data, and
usage recommendations are detailed in the UCSP appli-
cation note, which can be found on Maxim’s website at
www.maxim-ic.com.
( ) ARE FOR MAX6407/MAX6410
_______________________________________________________________________________________
7
X
Voltage Detectors in 4-Bump (2 2)
Chip-Scale Package
Package Information
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
8 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2001 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
相关型号:
MAX6407BS34
Power Supply Support Circuit, Fixed, 2 Channel, BICMOS, PDSO6, MO-178AB, SOT-23, 6 PIN
MAXIM
MAX6407BS34+
Power Supply Support Circuit, Fixed, 2 Channel, BICMOS, PDSO6, LEAD FREE, MO-178AB, SOT-23, 6 PIN
MAXIM
MAX6407BS34+T
Power Supply Management Circuit, Fixed, 2 Channel, BICMOS, PDSO6, LEAD FREE, MO-178AB, SOT-23, 6 PIN
MAXIM
MAX6407BS34-T
Power Supply Management Circuit, Fixed, 2 Channel, BICMOS, PDSO6, MO-178AB, SOT-23, 6 PIN
MAXIM
MAX6408BS22+
Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PBGA4, LEAD FREE, BUMP, UCSP-4
MAXIM
MAX6408BS22+T
Power Supply Support Circuit, Fixed, 1 Channel, +2.2VV, BICMOS, PBGA4, LEAD FREE, BUMP, UCSP-4
MAXIM
©2020 ICPDF网 联系我们和版权申明