MAX6506UTP075+T [MAXIM]
Analog Circuit, 1 Func, BICMOS, PDSO6, ROHS COMPLIANT, SOT-23, 6 PIN;型号: | MAX6506UTP075+T |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | Analog Circuit, 1 Func, BICMOS, PDSO6, ROHS COMPLIANT, SOT-23, 6 PIN 信息通信管理 光电二极管 |
文件: | 总10页 (文件大小:250K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
19-1712; Rev 1; 2/11
Dual Trip SOT Temperature Switches
–MAX6508
General Description
Features
The MAX6505–MAX6508 temperature switches have dual
logic outputs that assert when the die temperature cross-
es their trip thresholds. Trip thresholds are factory pro-
grammed to convenient temperatures in 5°C increments.
♦
0.5°C (typ) Threshold Accuracy Over Full
Temperature Range
♦ No External Components Required
♦ Low Cost
♦ 30µA (typ) Supply Current
♦ Factory-Programmed Thresholds from -40°C to
+125°C in 5°C Increments
The MAX6505/MAX6506 have an ALARM output that
asserts when the temperature is above the factory-pro-
grammed thresholds (available from -40°C to +125°C).
They also have a WARN output that asserts when the
temperature is several degrees below the ALARM thresh-
old. The difference between the ALARM and WARN
♦ Open-Drain Outputs (MAX6505/MAX6507),
Push-Pull Outputs (MAX6506/MAX6508)
♦ Pin Selectable 2°C, 10°C Hysteresis
(MAX6507/MAX6508)
thresholds (ΔT ) is pin selectable to +5°C, +10°C,
AW
+20°C, or +30°C. The MAX6505’s logic outputs are open
drain, while the MAX6506’s logic outputs are push-pull.
♦ Pin Selectable +5°C, +10°C, +20°C, +30°C
The MAX6507 has open-drain outputs (OVER, OK), and
the MAX6508 has push-pull outputs (OVER, OK), each
with two factory-programmed threshold temperatures
T
- T
(MAX6505/MAX6506)
ALARM
WARN
♦ SOT23 Package
(T
and T
) in the wide range of -40°C to
UNDER
OVER
+125°C. The overtemperature output asserts when the
temperature is above T . When the temperature is in
Ordering Information
OVER
PART
TEMP RANGE PIN-PACKAGE
-40°C to +125°C 6 SOT23
-40°C to +125°C 6 SOT23
-40°C to +125°C 6 SOT23
the desired window (less than T
and greater than
OVER
T ), OK (OK) asserts.
UNDER
MAX6505UT_ _ _ _+T
MAX6506UT_ _ _ _+T
MAX6507UT_ _ _ _+T
The MAX6505–MAX6508 are accurate to 0.5°C (typ),
5.5°C (max). Operating from a +2.5V to +5.5V supply,
these low-cost devices typically consume 30µA supply
current and require no external components for setting
trip points. The MAX6505–MAX6508 are available in a
6-pin SOT23 package.
MAX6508UT_ _ _ _+T -40°C to +125°C 6 SOT23
Note: To complete the suffix information for the MAX6505/
MAX6506, add P or N for positive or negative trip tempera-
ture, and select an available trip point in degrees centigrade.
For example, the MAX6505UTP055+T describes a MAX6505 in
a SOT23 package with a +55°C threshold (Table 3). Contact
the factory for pricing and availability of temperature versions
(minimum order 10,000 pieces).
To complete the suffix information for MAX6507/MAX6508, see
Table 4.
+Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
________________________Applications
µP Temperature Monitoring in High-Speed
Computers
Temperature Control
Temperature Alarms
Fan Control
Selector Guide appears at end of data sheet.
Typical Operating Circuits appear at end of data sheet.
Pin Configurations
TOP VIEW
+
+
WARN
(WARN)
ALARM
(ALARM)
OK
(OK)
OVER
(OVER)
1
2
3
6
5
4
1
2
3
6
5
4
MAX6505
MAX6506
MAX6507
MAX6508
GND
S1
S0
GND
S0
N.C.
V
CC
V
CC
( ) ARE FOR MAX6506.
( ) ARE FOR MAX6508.
SOT23
SOT23
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
Dual Trip SOT Temperature Switches
ABSOLUTE MAXIMUM RATINGS
Supply Voltage (V
to GND) ..................................-0.3V to +6V
Operating Temperature Range (T
to T )..-40°C to +125°C
MAX
CC
MIN
S1, S0 to GND ............................................-0.3V to (V
All Other Pins to GND.................................-0.3V to (V
Input/Output Current, All Pins........................................... 20mA
+ 0.3V)
+ 0.3V)
Thermal Resistance (θ )...............................................115°C/W
CC
CC
JA
Storage Temperature Range.............................-65°C to +150°C
Maximum Die Temperature..............................................+150°C
Lead Temperature (soldering, 10s) .................................+300°C
Soldering Temperature (reflow) .......................................+260°C
Continuous Power Dissipation (T = +70°C)
A
SOT23 (derate 8.7mW/°C above +70°C)....................696mW
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V
= +2.5V to +5.5V, R
= 100kΩ (MAX6505/MAX6507 only), T = -40°C to +125°C, unless otherwise noted. Typical values
CC
PULLUP A
= +5V, unless otherwise noted.) (Note 1)
are at T = +25°C and V
A
CC
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Supply Voltage Range
V
2.5
5.5
V
CC
MAX6505/
MAX6506
–MAX6508
S0 = S1 = GND
S0 = GND
40
30
80
60
Supply Current
I
μA
°C
°C
CC
MAX6507/
MAX6508
-40°C to 0°C
-5.5
-3.5
-4
0.5
0.5
0.5
5
5.5
3.5
4
Temperature Threshold
Accuracy (Note 2)
ΔT
ΔT
0°C to +95°C
TH
+95°C to +125°C
S1 = GND, S0 = GND
Delta Temperature
S1 = GND, S0 = V
10
20
30
2
CC
(T
-T
)
ALARM WARNING
AW
S1 = V , S0 = GND
CC
MAX6505/MAX6506
S1 = V , S0 = V
CC
CC
ALARM (MAX6505/MAX6506)
ΔT
10°C
= 5°C or
AW
5
WARN
(MAX6505/MAX6506)
Temperature Threshold
Hysteresis (Note 3)
ΔT
30°C
= 20°C or
AW
T
HYST
°C
10
S0 = GND
2
OK, OVER
(MAX6507/MAX6508)
S0 = V
10
CC
0.8 x
V
IH
V
Logic Input Levels (S1, S0)
CC
V
V
0.8
IL
0.8 x
I
I
= 500μA, V
> 2.5V
SOURCE
SOURCE
CC
V
CC
Output Voltage High
(MAX6506/MAX6508)
V
V
V
OH
V
CC
= 800μA,V
> 4.5V
CC
-1.5
I
I
= 3.2mA, V > 2.5V
0.5
0.5
SINK
SINK
CC
Output Voltage Low
V
OL
= 5mA, V > 4.5V
CC
2
_______________________________________________________________________________________
Dual Trip SOT Temperature Switches
–MAX6508
ELECTRICAL CHARACTERISTICS (continued)
(V
= +2.5V to +5.5V, R
= 100kΩ (MAX6505/MAX6507 only), T = -40°C to +125°C, unless otherwise noted. Typical values
CC
PULLUP A
= +5V, unless otherwise noted.) (Note 1)
are at T = +25°C and V
A
CC
PARAMETER
SYMBOL
CONDITIONS
= 5.5V, V = 5.5V,
ALARM
MIN
TYP
MAX
UNITS
V
V
CC
1
= 5.5V (MAX6505)
WARN
Open-Drain Output Leakage
Current
μA
V
V
= 5.5V, V
= 5.5V,
CC
OK
1
= 5.5V (MAX6507)
OVER
Note 1: 100% production tested at T = +25°C. Specifications over temperature limits are guaranteed by design.
A
Note 2: T
, T
, and T
are factory-programmed temperature trip thresholds from -40°C to +125°C in 5°C increments.
ALARM UNDER
OVER
Note 3: Temperature threshold hysteresis is defined as the difference from positive-going temperature thresholds minus the nega-
tive-going temperature thresholds.
Typical Operating Characteristics
(V = +5V, unless otherwise noted.)
CC
SUPPLY CURRENT
vs. TEMPERATURE
TRIP-POINT ERROR (%)
vs. SUPPLY VOLTAGE
HYSTERESIS vs. TRIP TEMPERATURE
50
2.5
2.0
0.1
0
V
R
= +5V
V
R
= +5V
CC
PULLUP
CC
PULLUP
= 100kΩ
= 100kΩ
45
40
35
30
25
20
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
-0.8
1.5
1.0
0.5
NORMALIZED TO TRIP-POINT
TEMPERATURE AT V = +5V
CC
-40 -25 -10
5
20 35 50 65 80 95 110 125
-40 -25 -10
5 20 35 50 65 80 95 110 125
2.5
3.0
3.5
4.0
4.5
5.0
5.5
TEMPERATURE (°C)
TEMPERATURE (°C)
SUPPLY VOLTAGE (V)
MAX6505
MAX6505
STARTUP AND POWER-DOWN
(T < T
STARTUP DELAY
(T > T
)
TH
)
TH
A
A
2V/div
2V/div
B
B
100µs/div
B: ALARM VOLTAGE, R = 100kΩ
100µs/div
B: ALARM VOLTAGE, R = 100kΩ
A: V PULSE
A: V PULSE
CC
CC
PULLUP
PULLUP
_______________________________________________________________________________________
3
Dual Trip SOT Temperature Switches
Pin Description
PIN
NAME
FUNCTION
MAX6505
MAX6506
MAX6507
MAX6508
Open-Drain Active-Low Warning Output. WARN goes low
when the die temperature exceeds T
= T
-
1
-—
-—
WARN
WARN
ALARM
ΔT
AW.
Push-Pull Active-High Warning Output. WARN goes high
when the die temperature exceeds T = T
-—
2
1
2
-—
2
-—
2
WARN
GND
-
ALARM
WARN
ΔT
AW.
Ground
Delta Temperature Select Input. Connect to V
or GND to
CC
3, 5
3, 5
-—
-—
S1, S0
select the difference between T
and T
(Table
ALARM
WARN
1 or see Electrical Characteristics).
Hysteresis Select Input. Connect to V
hysteresis. Connect to GND for 2°C hysteresis.
for 10°C
CC
-—
-—
3
3
S0
–MAX6508
Supply Voltage Input. Bypass V
ceramic capacitor.
to GND with a 0.1μF
CC
4
4
4
5
4
5
V
CC
-—
-—
N.C.
No Connection. Not internally connected.
Open-Drain Active-Low Overtemperature Output.
OVER
-—
-—
-—
-—
6
_
-—
6
goes low when the die temperature exceeds the factory-
set value of T
Push-Pull Active-High Overtemperature Output. OVER
goes high when the die temperature exceeds the factory-
OVER
.
OVER
OVER
OK
set value of T
OVER.
Open-Drain Active-High Temperature Sensor Output. OK
goes high impedance when the die temperature is
-—
-—
-—
-—
1
-—
between the factory-set values of T
and T
.
UNDER
OVER
When the die temperature is above T
or below
OVER
T
, OK goes low.
UNDER
Push-Pull Active-Low Temperature Sensor Output. OK
goes low when the die temperature is between the factory-
-—
OK
1
set values of T
and T
. When the die temp-
UNDER
OVER
erature is above T
or below T
, OK goes high.
UNDER
OVER
Open-Drain Active-Low Alarm Output. ALARM goes low
when the die temperature exceeds the factory-set value of
6
-—
6
-—
-—
-—
-—
ALARM
T
.
ALARM
Push-Pull Active-High Alarm Output. ALARM goes high
when the die temperature exceeds the factory-set value of
-—
ALARM
T
.
ALARM
4
_______________________________________________________________________________________
Dual Trip SOT Temperature Switches
–MAX6508
_______________Detailed Description
Table 1. MAX6505/MAX6506 ΔT
Selection Table
AW
The MAX6505–MAX6508 fully integrated temperature
switches incorporate two temperature-dependent refer-
ences and a comparator. One reference exhibits a pos-
itive temperature coefficient and the other a negative
temperature coefficient. The temperature at which the
two reference voltages are equal determines the tem-
perature trip point. There are two versions, each of
which has two logic outputs.
CONTROL PINS
DESCRIPTION
ꢀT
AW
=T
– T
ALARM WARN
S1
S0
(°C)
GND
GND
GND
5
V
CC
10
20
30
V
GND
CC
CC
The MAX6505/MAX6506 have a main trip point (T
)
ALARM
). When the die
V
V
CC
and a lower, “warning” trip point (T
WARN
temperature rises above these trip points, the ALARM
and WARN outputs are asserted (Figure 1). The differ-
HYSTERESIS ≈ 2°C
ence between the two trip points (ΔT ) is pin selec-
AW
table to +5°C, +10°C, +20°C, or +30°C by connecting
the two control pins (S0 and S1) high or low (Table 1).
MAX6505 has open-drain active-low outputs; MAX6506
has push-pull active-high outputs.
65°C
55°C
The MAX6507/MAX6508 have two factory-programmed
HYSTERESIS ≈ 5°C
threshold temperatures (T
and T
) and two
UNDER
OVER
outputs (OK and OVER). One output (OK) asserts
when the temperature is between T and T
.
UNDER
OVER
WARN
The other output (OVER) asserts when the temperature
is above T . Table 4 shows the hex codes to deter-
OVER
mine the part numbers associated with specific values
of T and T . The first hex code indicates the
OVER
UNDER
UNDER
lower trip point (T
) and the second indicates the
ALARM
higher trip point (T
). For example, a part with T
OVER
OVER
UN-
= -10°C and T
= +75°C will have the part
DER
number MAX6508UTA04B (Table 4 and Figure 2).
MAX6507 has open-drain outputs; MAX6508 has push-
pull outputs.
Figure 1. Temperature Response—MAX6505UTP065 Outputs,
ΔT = 10°C, and WARN Hysteresis ≈ 5°C
AW
Hysteresis Selection
some applications, the SOT23 packages may be small
enough to fit underneath a socketed microprocessor
(µP), allowing the device to monitor the µP’s tempera-
ture directly. Use the monitor’s output to reset the µP,
assert an interrupt, or trigger an external alarm.
Accurate temperature monitoring depends on the ther-
mal resistance between the device being monitored
and the MAX6505–MAX6508 die.
The temperature threshold hysteresis for the ALARM
output of the MAX6505/MAX6506 is 2°C. The hysteresis
for the WARN output depends on the value of ΔT . If
AW
ΔT
is 5°C or 10°C (set by S0 and S1), WARN hys-
AW
teresis is 5°C. If ΔT
is 20°C or 30°C, WARN hystere-
AW
sis is 10°C. MAX6507 and MAX6508 have pin-selectable
hysteresis of 2°C or 10°C for both OVER and OK out-
puts (Table 2).
The rise in die temperature due to self-heating is given
by the following formula:
Applications Information
✕
ΔT = P
θ
JA
J
DISSIPATION
Thermal Considerations
The MAX6505–MAX6508 supply current is typically
30µA. When used to drive high-impedance loads, the
devices dissipate negligible power. Therefore, the die
temperature is essentially the same as the package
temperature. The key to accurate temperature monitor-
ing is good thermal contact between the MAX6505–
MAX6508 package and the device being monitored. In
where P
is the power dissipated by the
DISSIPATION
MAX6505–MAX6508, and θ is the package’s thermal
JA
resistance. The typical thermal resistance is 115°C/W for
the SOT23 package. To limit the effects of self-heating,
minimize the output currents. For example, if the
MAX6505 sinks 5mA, the output voltage is guaranteed to
be less than 0.5V. Therefore, an additional 2.5mW of
_______________________________________________________________________________________
5
Dual Trip SOT Temperature Switches
Table 2. Hysteresis Selection
TYPICAL THRESHOLD HYSTERESIS
PART
ALARM
2°C
CONDITIONS
WARN
5°C
CONDITIONS
OK, OVER
—
—
—
ΔT
= 5°C or 10°C
= 20°C or 30°C
—
WA
MAX6505
MAX6506
—
—
10°C
—
ΔT
WA
-—
2°C
S0 = GND
S0 = V
MAX6507
MAX6508
-—
—
—
—
10°C
CC
+2.5V TO +5.5V
HYSTERESIS ≈ 2°C
+75°C
TEMPERATURE
-10°C
HYSFERESIS ≈ 2°C
-10°C
V
CC
SYSTEM
SHUTDOWN
*
S1
S0
ALARM
–MAX6508
MAX6506
WARN
FAN CONTROL
OVER
GND
OK
*ΔT = T
- T
IS SET TO +30°C.
AW
ALARM WARN
Figure 3. Low-Power, High-Reliability, Fail-Safe Temperature
Monitor
Figure 2. Temperature Response—MAX6507A04B Outputs
with 2°C Hysteresis
power is dissipated within the IC. This corresponds to a
+0.288°C shift in the die temperature in the SOT23.
The high-level integration, low cost, and small size of the
MAX6505–MAX6508 facilitate the use of multiple temper-
ature monitors to increase system reliability.
Power Supply and Bypassing
The MAX6505 and MAX6508 operate from a single-
supply voltage in the +2.5V to +5.5V range. Connect a
0.1µF capacitor on the supply voltage line close to the
V
CC
pin for bypassing.
Low-Cost, Fail-Safe Temperature Monitor
The MAX6505/MAX6506 provide two outputs that can be
used for fail-safe temperature applications (Figure 3). For
example, the first output can activate a fan when the die
temperature exceeds a certain preset temperature. The
second output asserts at a higher temperature that could
be caused by a wide variety of destructive fault condi-
tions, including latchup, short circuit, and cooling system
failure. This output can be used to initiate such actions
as shutdown of the entire system (see Typical Operating
Circuits).
6
_______________________________________________________________________________________
Dual Trip SOT Temperature Switches
–MAX6508
Table 3. MAX6505/MAX6506 Suffix and Top Mark Codes
TRIP POINT
TRIP POINT
PART
SUFFIX
TOP MARK
PART
SUFFIX
TOP MARK
(°C)
(°C)
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
MAX6505
UTN035
UTN030
UTN025
UTN020
UTN015
UTN010
UTN005
UTP000
UTP005
UTP010
UTP015
UTP020
UTP025
UTP030
UTP035
UTP040
UTP045
UTP050
UTP055
UTP060
UTP065
UTP070
UTP075
UTP080
UTP085
UTP090
UTP095
UTP100
UTP105
UTP110
UTP115
UTP120
UTP125
-35
-30
-25
-20
-15
-10
-5
AAKK
AAKL
AAKM
AAKN
AAKO
AAKP
AAKQ
AAKR
AAKS
AAKT
AAKU
AAKV
AAKW
AAKX
AAKY
AAKZ
AALA
AALB
AALC
AALD
AALE
AALF
AALG
AALH
AALI
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
MAX6506
UTN035
UTN030
UTN025
UTN020
UTN015
UTN010
UTN005
UTP000
UTP005
UTP010
UTP015
UTP020
UTP025
UTP030
UTP035
UTP040
UTP045
UTP050
UTP055
UTP060
UTP065
UTP070
UTP075
UTP080
UTP085
UTP090
UTP095
UTP100
UTP105
UTP110
UTP115
UTP120
UTP125
-35
-30
-25
-20
-15
-10
-5
AALR
AALS
AALT
AALU
AALV
AALW
AALX
AALY
AALZ
AAMA
AAMB
AAMC
AAMD
AAME
AAMF
AAMG
AAMH
AAMI
0
0
5
5
10
10
15
15
20
20
25
25
30
30
35
35
40
40
45
45
50
50
55
55
AAMJ
AAMK
AAML
AAMM
AAMN
AAMO
AAMP
AAMQ
AAMR
AAMS
AAMT
AAMU
AAMV
AAMW
AAMX
60
60
65
65
70
70
75
75
80
80
85
85
90
AALJ
AALK
AALL
AALM
AALN
AALO
AALP
AALQ
90
95
95
100
105
110
115
120
125
100
105
110
115
120
125
_______________________________________________________________________________________
7
Dual Trip SOT Temperature Switches
Temperature-Window Alarm
Table 4. MAX6507/MAX6508 Trip
Temperature Code
The MAX6507 and MAX6508 have an output (OK, OK)
that indicates the die temperature is within the selected
temperature window. This output is asserted when
within the window, and deasserted when outside the
window. Additionally, a second digital output indicates
when the die temperature is above the upper set point.
This is useful in systems where operation is optimized
over a predetermined temperature range. The thermal
overrange signal can be used to assert a thermal shut-
down, power-up, recalibration, or other temperature-
dependent function (Figure 4 and Typical Operating
Circuits).
TRIP TEMPERATURE (°C)
HEX CODE*
-40
-35
-30
-25
-20
-15
-10
-5
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
82
87
8C
91
96
9B
A0
A5
00
05
0A
0F
14
19
1E
23
28
2D
32
37
3C
41
46
4B
50
55
5A
5F
64
69
6E
73
78
+2.5V TO +5.5V
V
CC
–MAX6508
S0
OUT OF RANGE
SHUTDOWN
OK
MAX6508
OVER
GND
Figure 4. Temperature-Window Alarms
Chip Information
PROCESS: BiCMOS
Package Information
For the latest package outline information and land patterns
(footprints), go to www.maxim-ic.com/packages. Note that a
“+”, “#”, or “-” in the package code indicates RoHS status only.
Package drawings may show a different suffix character, but
the drawing pertains to the package regardless of RoHS status.
125
7D
PACKAGE
TYPE
PACKAGE
CODE
OUTLINE
NO.
LAND
*Two hex codes are used in the suffix. The first indicates the
the low trip temperature and the second indicates the high trip
temperature. For example, the MAX6507UT8255+T has a lower
trip point of -40°C and an upper trip point of +85°C.
PATTERN NO.
6 SOT23
U6SN+1
21-0058
90-0175
8
_______________________________________________________________________________________
Dual Trip SOT Temperature Switches
–MAX6508
Typical Operating Circuits
V
CC
+2.5V TO +5.5V
FAN
+2.5V TO +5.5V
R
1
R
2
V
CC
V
CC
V
CC
S0
S1
S0
S1
WARN
WARN
INT
μP
MAX6506
MAX6505
ALARM
SHDN
ALARM
GND
GND
GND
V
CC
INT
μP
V
CC
GND
FAN
+2.5V TO +5.5V
V
CC
OVER
OK
V
CC
MAX6508
S0
INT
μP
GND
GND
Selector Guide
TEMPERATURE THRESHOLD
RANGE
PART
OUTPUT LOGIC
OUTPUT STAGE
MAX6505
MAX6506
MAX6507
MAX6508
ALARM, WARN
ALARM, WARN
OVER, OK
Open Drain
Push-Pull
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
Open Drain
Push-Pull
OVER, OK
_______________________________________________________________________________________
9
Dual Trip SOT Temperature Switches
Revision History
REVISION REVISION
DESCRIPTION
PAGES
CHANGED
NUMBER
DATE
0
4/00
Initial release
—
Changed all leaded parts to lead(Pb)-free parts in the Ordering Information table; in
the Absolute Maximum Ratings section changed the continuous power dissipation
numbers (7.1mW/°C to 8.7mW/°C and 571mW to 696mW) and added the soldering
temperature; added the Package Information table
1
2/11
1, 2, 8
–MAX6508
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
10 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2011 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.
相关型号:
©2020 ICPDF网 联系我们和版权申明