MAX6516UKP055 [MAXIM]
Low-Cost, 2.7V to 5.5V, Analog Temperature Sensor Switches in a SOT23; 低成本, 2.7V至5.5V ,模拟温度传感器,开关采用SOT23型号: | MAX6516UKP055 |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | Low-Cost, 2.7V to 5.5V, Analog Temperature Sensor Switches in a SOT23 |
文件: | 总10页 (文件大小:187K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
19-3007; Rev 1; 2/11
Low-Cost, 2.7V to 5.5V, Analog Temperature
Sensor Switches in a SOT23
–MAX6519
General Description
Features
The MAX6516–MAX6519 low-cost, fully integrated tem-
perature switches assert a logic signal when their die
temperature crosses a factory-programmed threshold.
Operating from a 2.7V to 5.5V supply, these devices
feature a fixed voltage reference, an analog tempera-
ture sensor, and a comparator. They are available with
factory-trimmed temperature trip thresholds from -45°C
to +115°C in 10°C increments, and are accurate to
0.5°C ꢀtypꢁ. These devices reꢂuire no external compo-
nents and typically consume 22µA of supply current.
Hysteresis is pin selectable at 2°C or 10°C.
♦ High Accuracy 1.5°C (max) Over -15°C to +65°C
Temperature Range
♦ Low Power Consumption—22µA Typical Current
♦ Factory-Programmed Thresholds from -45°C to
+115°C in 10°C Increments
♦ Analog Output to Allow Board-Level Testing
♦ Open-Drain or Push-Pull Outputs
♦ Pin-Selectable 2°C or 10°C Hysteresis
Ordering Information
The MAX6516–MAX6519 are offered with hot-tempera-
ture thresholds ꢀ+35°C to +115°Cꢁ, asserting when the
temperature is above the threshold, or with cold-tem-
perature thresholds ꢀ-45°C to +15°Cꢁ, asserting when
the temperature is below the threshold.
PART
TEMP RANGE
PIN-PACKAGE
MAX6516UK_ _ _ _+T -55°C to +125°C 5 SOT23
MAX6517UK_ _ _ _+T -55°C to +125°C 5 SOT23
MAX6518UK_ _ _ _+T -55°C to +125°C 5 SOT23
MAX6519UK_ _ _ _+T -55°C to +125°C 5 SOT23
These devices provide an analog output proportional to
temperature and are stable with any capacitive load up
to 1000pF. The MAX6516–MAX6519 can be used over a
range of -35°C to +125°C with a supply voltage of 2.7V
to 5.5V. For applications sensing temperature down to
-45°C, a supply voltage above 4.5V is reꢂuired.
Note: These parts are offered in 16 standard temperature ver-
sions with a minimum order of 2500 pieces. To complete the
suffix information, add P or N for positive or negative trip tem-
perature, and select an available trip point in degrees centi-
grade. For example, the MAX6516UKP065+T describes a
MAX6516 in a 5-pin SOT23 package with a +65°C threshold.
Contact the factory for pricing and availability.
The MAX6516 and MAX6518 have an active-high,
push-pull output. The MAX6517 and MAX6519 have an
active-low, open-drain output. These devices are avail-
able in a space-saving 5-pin SOT23 package and oper-
ate over the -55°C to +125°C temperature range.
+Denotes a leadꢀPbꢁ-free/RoHS-compliant package.
T = Tape and reel.
Functional Diagram appears at end of data sheet.
Applications
Fan Control
Over/Undertemperature
Protection
Pin Configurations
Test Eꢂuipment
Temperature Control
Temperature Alarms
TOP VIEW
Notebook, Desktop PCs
RAID
(TOVER)
TOVER
(TUNDER)
TUNDER
OUT
GND
HYST
1
2
3
5
4
5
4
OUT
GND
HYST
1
2
3
5
4
5
4
Servers
(MAX6516)
MAX6517
(MAX6516)
MAX6517
Typical Operating Circuit
V
V
CC
CC
V
CC
SOT23
SOT23
100kΩ
V
CC
(TOVER)
TOVER
(TUNDER)
TUNDER
V
TOVER
INT
CC
HYST
GND
OUT
1
2
3
HYST
GND
OUT
1
2
3
0.1μF
MICROCONTROLLER
(MAX6518)
MAX6519
(MAX6518)
MAX6519
MAX6517
OUT
ADC IN
GND
GND
HYST
V
V
CC
CC
SOT23
SOT23
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
Low-Cost, 2.7V to 5.5V, Analog Temperature
Sensor Switches in a SOT23
ABSOLUTE MAXIMUM RATINGS
All voltages are referenced to GND.
Continuous Power Dissipation ꢀT = +70°Cꢁ
A
V
...........................................................................-0.3V to +6V
SOT23 ꢀderate 3.1mW/°C above +70°Cꢁ.....................247mW
Operating Temperature Range ........................-55°C to +125°C
Junction Temperature..................................................... +150°C
Storage Temperature Range.............................-65°C to +150°C
Lead Temperature ꢀsoldering, 10sꢁ ................................ +300°C
Soldering Temperature ꢀreflowꢁ .......................................+260°C
CC
TOVER, TUNDER ꢀopen drainꢁ................................ -0.3V to +6V
TOVER, TUNDER ꢀpush-pullꢁ .................... -0.3V to ꢀV
OUT, HYST .................................................-0.3V to ꢀV
+ 0.3Vꢁ
+ 0.3Vꢁ
CC
CC
OUT Short to GND.........................................................Indefinite
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
ꢀV
= 2.7V to 5.5V, R
= +25°C.ꢁ ꢀNote 1ꢁ
= 100kΩ ꢀopen-drain output onlyꢁ, T = -55°C to +125°C, unless otherwise noted. Typical values are at
PULLUP
A
CC
T
A
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Supply Voltage Range
Supply Current
V
2.7
5.5
V
CC
Hot-temperature thresholds
ꢀ+35°C to +115°Cꢁ
22
40
40
–MAX6519
I
µA
CC
Cold-temperature thresholds
ꢀ-45°C to +15°Cꢁ
-15°C to +65°C
-1.5
-2.5
-3
+1.5
+2.5
+3
Temperature Threshold Accuracy
ꢀNote 2ꢁ
ΔT
TH
°C
+75°C to +115°C
-45°C to -25°C ꢀNote 3ꢁ
HYST = V
2
CC
Temperature Threshold
Hysteresis
T
°C
V
HYST
HYST = GND
10
V
0.8 x V
0.8 x V
IH
CC
CC
HYST Input Logic Level ꢀNote 4ꢁ
V
0.2 x V
CC
IL
I
I
I
I
= 500µA, V > 2.7V
CC
SOURCE
SOURCE
Logic Output Voltage High
ꢀPush-Pullꢁ
V
V
OH
= 800µA, V > 4.5V
V
- 1.5
CC
CC
= 1.2mA, V > 2.7V
0.3
0.4
SINK
SINK
CC
Logic Output Voltage Low
ꢀPush-Pull and Open Drainꢁ
V
V
OL
= 3.2mA, V > 4.5V
CC
Open-Drain Output Leakage
Current
V
= 2.7V, open-drain output = 5.5V
10
nA
CC
OUT TEMPERATURE SENSITIVITY
Error to Eꢂuation:
-30°C to +125°C, V
= 2.7V to 5.5V
-2
-5
+2
+2
CC
OUT = 1.8015V - 10.62mVꢀT - 30ꢁ
°C
- 1.1µV ꢀT - 30ꢁ2
-55°C to -30°C ꢀNote 3ꢁ
Sensor Gain
-10.62
mV/°C
OUT Capacitive Load ꢀNote 4ꢁ
1000
0.24
pF
0 < I
< 40µA
OUT
OUT Load Regulation
OUT Line Regulation
°C
-1µA < I
< 0
0.02
0.04
OUT
0.3
°C/V
Note 1: 100% production tested at T = +25°C. Specifications over temperature are guaranteed by design.
A
Note 2: The MAX6516–MAX6519 are available with internal factory-programmed temperature trip thresholds from -45°C to +115°C
in 10°C increments.
Note 3: V
must be greater than 4.5V for a switching threshold of -45°C.
Note 4: Guaranteed by design.
CC
2
_______________________________________________________________________________________
Low-Cost, 2.7V to 5.5V, Analog Temperature
Sensor Switches in a SOT23
–MAX6519
Typical Operating Characteristics
ꢀV
CC
= 5V, T = +25°C, unless otherwise noted.ꢁ
A
TEMPERATURE ERROR
vs. TEMPERATURE
TRIP-THRESHOLD ACCURACY
OUTPUT VOLTAGE vs. TEMPERATURE
50
2.75
2.50
2.25
2.00
1.75
1.50
1.25
1.00
0.75
0.50
2
1
SAMPLE SIZE = 147
40
30
20
10
0
0
-1
-2
-1.25 -0.75 -0.25
0
0.5
1.0
-55 -35 -15
5
25 45 65 85 105 125
-55 -35 -15
5
25 45 65 85 105 125
TO -1.5 TO -1.0 TO -0.5 TO 0.25 TO 0.75 TO 1.25
TEMPERATURE (°C)
TEMPERATURE (°C)
ACCURACY (°C)
TOVER/TUNDER OUTPUT VOLTAGE HIGH
vs. SOURCE CURRENT
SUPPLY CURRENT vs. TEMPERATURE
OUTPUT VOLTAGE vs. SUPPLY VOLTAGE
30
25
20
15
10
5
5
4
3
2
1
0
1.8300
1.8250
1.8200
1.8150
1.8100
1.8050
1.8000
1.7950
1.7900
1.7850
1.7800
T
A
= +30°C
0
-55 -35 -15
5
25 45 65 85 105 125
0
1
2
3
4
I
5
6
7
8
9
10
2.5
3.0
3.5
4.0
4.5
5.0
5.5
TEMPERATURE (°C)
(mA)
SUPPLY VOLTAGE (V)
SINK
TOVER/TUNDER OUTPUT VOLTAGE LOW
vs. SOURCE CURRENT
THERMAL STEP RESPONSE IN
PERFLOURINATED FLUID
THERMAL STEP RESPONSE IN
STILL AIR
MAX6516 toc08
MAX6516 toc09
500
400
300
200
100
0
+25°C
+25°C
+18.5°C/div
+100°C
+18.5°C/div
+100°C
0
1
2
3
4
5
6
7
8
9
10
2s/div
10s/div
I
(mA)
SINK
_______________________________________________________________________________________
3
Low-Cost, 2.7V to 5.5V, Analog Temperature
Sensor Switches in a SOT23
Typical Operating Characteristics (continued)
ꢀV
CC
= 5V, T = +25°C, unless otherwise noted.ꢁ
A
STARTUP AND POWER-DOWN
STARTUP DELAY
(TEMP > T
(TEMP < T )
TH
)
TH
MAX6516 toc10
MAX6516 toc11
V
(5V/div)
V
CC
(5V/div)
CC
TOVER (5V/div)
TOVER (5V/div)
V
(5V/div)
V
(5V/div)
OUT
OUT
200μs/div
200μs/div
–MAX6519
Pin Description
PIN
NAME
FUNCTION
MAX6516 MAX6517 MAX6518 MAX6519
1
2
1
2
3
2
3
2
OUT
GND
Analog Output. Voltage represents the die’s temperature.
Ground
Hysteresis Input. Connect to V
10°C hysteresis.
for 2°C of hysteresis or to GND for
CC
3
4
3
4
1
4
1
4
HYST
V
Input Supply. Bypass to ground with a 0.1µF capacitor.
CC
Push-Pull Active-High Output ꢀHot Thresholdꢁ. TOVER goes high when
the die temperature exceeds the factory-programmed hot temperature
threshold.
5
—
5
—
5
—
5
—
TOVER
Open-Drain, Active-Low Output ꢀHot Thresholdꢁ. TOVER goes low
when the die temperature exceeds the factory-programmed hot
temperature threshold. Connect to a 100kΩ pullup resistor. May be
5
5
TOVER
pulled up to a voltage higher than V
.
CC
Push-Pull Active-High Output ꢀCold Thresholdꢁ. TUNDER goes high
TUNDER when the die temperature falls below the factory-programmed cold
temperature threshold.
—
5
—
5
Open-Drain, Active-Low Output ꢀCold Thresholdꢁ. TUNDER goes low
when the die temperature goes below the factory-programmed cold
temperature threshold. Connect to a 100kΩ pullup resistor. May be
—
—
TUNDER
pulled up to a voltage higher than V
.
CC
4
_______________________________________________________________________________________
Low-Cost, 2.7V to 5.5V, Analog Temperature
Sensor Switches in a SOT23
–MAX6519
Logic Temperature Indicators
Overtemperature Indicator (Hot Thresholds)
TOVER and TOVER designations apply to thresholds
above T = +25°C ꢀ+35°C, +45°C, +55°C, +65°C, +75°C,
A
+85°C, +95°C, +105°C, +115°Cꢁ. All “hot” thresholds are
positive temperatures.
Detailed Description
The MAX6516–MAX6519 fully integrated temperature
switches incorporate a fixed reference, an analog tem-
perature sensor, and a comparator. The temperature at
which the two reference voltages are eꢂual determines
the temperature trip point. OUT is an analog voltage
that varies with the die’s temperature. Pin-selectable
2°C or 10°C hysteresis keeps the digital output from
oscillating when the die temperature approaches the
threshold temperature. The MAX6516 and MAX6518
have an active-high, push-pull output structure that can
sink or source current. The MAX6517 and MAX6519
have an active-low, open-drain output structure that
can only sink current. The internal power-on reset cir-
cuit guarantees the logic output is at its +25°C state for
at least 50µs.
The overtemperature indicator output is open-drain
active low ꢀTOVERꢁ or push-pull active high ꢀTOVERꢁ.
TOVER goes low when the die temperature exceeds
the factory-programmed temperature threshold. TOVER
should be pulled up to a voltage no greater than 5.5V
with a 100kΩ pullup resistor. TOVER is a push-pull
active-high CMOS output that goes high when the die
temperature exceeds the factory-programmed temper-
ature threshold.
Undertemperature Indicator (Cold Thresholds)
Analog Output
OUT is an analog output that is proportional to the die
temperature. OUT voltage range is between 0.77V to
2.59V, within the temperature range of -45°C to
+125°C. For applications with a switching threshold of
-45°C, the supply voltage must be greater than 4.5V.
The temperature-to-voltage transfer function is approxi-
mately linear and can be described by the ꢂuadratic
eꢂuation:
TUNDER and TUNDER designations apply to thresholds
below T = +25°C ꢀ+15°C, +5°C, -5°C, -15°C, -25°C,
A
-35°C, -45°Cꢁ. The undertemperature indicator output is
open drain, active low ꢀTUNDERꢁ, or push-pull active
high ꢀTUNDERꢁ. TUNDER goes low when the die tem-
perature goes below the factory-programmed tempera-
ture threshold. TUNDER should be pulled up to a
voltage no greater than 5.5V with a 100kΩ pullup resis-
tor. TUNDER is a push-pull active-high CMOS output
that goes high when the die temperature falls below the
factory-programmed temperature threshold.
V
OUT
= 1.8015 - 10.62mV ꢀT - 30ꢁ + 1.1µV ꢀT - 30ꢁ2
Applications Information
where T = temperature in °C.
Temperature-Window Alarm
The MAX6516/MAX6518 logic outputs assert when the
die temperature is outside the factory-programmed
range. Combining the outputs of two devices creates
an over/undertemperature alarm. Two MAX6516s or
two MAX6518s are used to form two complementary
pairs, containing one cold trip-point output and one hot
trip-point output. The assertion of either output alerts
the system to an out-of-range temperature. The
MAX6516 push-pull output stages can be ORed to
produce a thermal out-of-range alarm ꢀFigure 1ꢁ.
In most cases, a linear approximation can be applied:
V
OUT
= 1.8015 - 10.62mV ꢀT - 30ꢁ
Therefore,
1.8015 − V
OUT
T =
+ 30°C
0.01062
More favorably, two MAX6517s or two MAX6519s can
be directly wire-ORed with a single external resistor to
accomplish the same task. The temperature window
alarms shown in Figure 2 can be used to accurately
determine when a device’s temperature falls out of the
-5°C to +75°C range. The thermal overrange signal can
be used to assert a thermal shutdown, power-up,
recalibration, or other temperature-dependent function.
Hysteresis Input
The HYST input selects the devices’ temperature hys-
teresis and prevents the output from oscillating when the
temperature approaches the trip point. Connect HYST to
V
for 2°C hysteresis or to GND for 10°C hysteresis.
CC
_______________________________________________________________________________________
5
Low-Cost, 2.7V to 5.5V, Analog Temperature
Sensor Switches in a SOT23
5V
5V
V
CC
OUT
100kΩ
OUT OF RANGE
MAX6516UKP075
V
CC
V
CC
TOVER
TUNDER
GND
OVERTEMP
OUT OF RANGE
HYST
TOVER
MAX6517UKP075
MAX6517UKN005
OUT
OUT
GND
HYST
GND
HYST
V
CC
TUNDER
UNDERTEMP
MAX6516UKN005
Figure 2. Temperature Window Alarm Using the MAX6517
GND
HYST
OUT
–MAX6519
5V
SYSTEM
SHUTDOWN
Figure 1. Temperature-Window Alarms Using the MAX6516
V
CC
TOVER
Low-Cost, Fail-Safe Temperature
In high-performance/high-reliability applications, multi-
ple temperature monitoring is important. The high-level
integration and low cost of the MAX6516 and MAX6518
facilitate the use of multiple temperature monitors to
increase system reliability. The application in Figure 3
uses two MAX6516s with different hot temperature
thresholds to ensure that fault conditions that can
overheat the monitored device cause no permanent
damage. The first temperature monitor activates the fan
when the die temperature exceeds +45°C. The second
MAX6516 triggers a system shutdown if the die
temperature reaches +75°C, preventing damage from
a wide variety of destructive fault conditions, including
latchups, short circuits, and cooling-system failures.
MAX6516UKP075
OUT
GND HYST
HEAT
μP
V
CC
FAN CONTROL
TOVER
GND
HYST
MAX6516UKP045
HEAT
OUT
PC Board Testing
The MAX6516–MAX6519 temp sensor devices can be
tested after PC board assembly using OUT. Testing
can be used to verify proper assembly and functionality
of the temperature protection circuitry. Since OUT has
a weak drive capability, the voltage at OUT can be
forced to cause the digital outputs to change states,
thereby verifying that the internal comparators and out-
put circuitry function properly after assembly. Below is
a test procedure that can be used to test the
MAX6516–MAX6519:
GND
Figure 3. Low-Power, High-Reliability, Fail-Safe Temperature
Monitor
• Power up the device, measure OUT, and observe the
state of the logic output.
6
_______________________________________________________________________________________
Low-Cost, 2.7V to 5.5V, Analog Temperature
Sensor Switches in a SOT23
–MAX6519
• Calculate the temperature using the formula:
Thermal Considerations
The MAX6516–MAX6519 supply current is typically 22µA.
When used to drive high-impedance loads, the devices
dissipate negligible power. Therefore, the die tempera-
ture is essentially the same as the package temperature.
1.8015 − V
OUT
T =
+ 30
0.01062
• Verify that the temperature measured is within 2°C
of the ambient board temperature. Measure the
ambient board temperature using an accurate cali-
brated temperature sensor.
Accurate temperature monitoring depends on the thermal
resistance between the device being monitored and the
MAX6516–MAX6519 die. Heat flows in and out of plastic
packages, primarily through the leads. Pin 2 of the 5-pin
SOT23 package provides the lowest thermal resistance to
the die. Short, wide copper traces between the
MAX6516–MAX6519 and the object whose temperature
is being monitored ensures heat transfers occur ꢂuickly
and reliably. The rise in die temperature due to self-heat-
ing is given by the following formula:
• Connect OUT to ground ꢀOUT to V
for cold
CC
threshold versionsꢁ and observe the state change of
the logic output.
• Disconnect OUT from ground and observe that the
logic output reverts to its initial state.
ΔT = P
✕ θ
Hysteresis Testing
J
DISSIPATION JA
The MAX6516–MAX6519 can be programmed with 2°C
where P
is the power dissipated by the
DISSIPATION
or 10°C of hysteresis by pin strapping HYST to V
or
CC
MAX6516–MAX6519, and θ is the thermal resistance
JA
GND, respectively. Below is a test feature that can be
used to measure the accuracy of the device’s hystere-
sis using a device with a +65°C threshold:
of the package.
The typical thermal resistance is 140°C/W for the
5-pin SOT23 package. To limit the effects of self-
heating, minimize the output current. For example, if the
MAX6516–MAX6519 sink 1mA, the open-drain output
voltage is guaranteed to be less than 0.3V. Therefore,
an additional 0.3mW of power is dissipated within the
IC. This corresponds to a 0.042°C shift in the die tem-
perature in the 5-pin SOT23 package.
• Power up the device and observe the state of the
digital output.
• Drive the OUT voltage down gradually.
• When the digital output changes state, note V
.
OUT
• V
trip = V
at logic output change of state
OUT
OUT
ꢀhigh to low or low to highꢁ.
• Calculate trip temperature ꢀT1ꢁ using:
Chip Information
1.8015 − V
OUT
PROCESS: BiCMOS
T =
+ 30
0.01062
• Gradually raise V
until the digital output reverts to
OUT
its initial state and note V
.
OUT
• Calculate trip temperature ꢀT2ꢁ.
• T = T2 - T1.
HYST
_______________________________________________________________________________________
7
Low-Cost, 2.7V to 5.5V, Analog Temperature
Sensor Switches in a SOT23
Table 1. Top Marks
Package Information
For the latest package outline information and land patterns
ꢀfootprintsꢁ, go to www.maxim-ic.com/packages. Note that a
“+”, “#”, or “-” in the package code indicates RoHS status only.
Package drawings may show a different suffix character, but
the drawing pertains to the package regardless of RoHS status.
TOP
MARK
TOP
MARK
PART
PART
MAX6516UKN045
MAX6516UKN035
MAX6516UKN025
MAX6516UKN015
MAX6516UKN005
MAX6516UKP005
MAX6516UKP015
MAX6516UKP035
MAX6516UKP045
MAX6516UKP055
MAX6516UKP065
MAX6516UKP075
MAX6516UKP085
MAX6516UKP095
MAX6516UKP105
MAX6516UKP115
MAX6517UKN045
MAX6517UKN035
MAX6517UKN025
MAX6517UKN015
MAX6517UKN005
MAX6517UKP005
MAX6517UKP015
MAX6517UKP035
MAX6517UKP045
MAX6517UKP055
MAX6517UKP065
MAX6517UKP075
MAX6517UKP085
MAX6517UKP095
MAX6517UKP105
MAX6517UKP115
AEHS
AECZ
AEHR
AEHQ
AEHP
AEHT
AEHU
AEHV
AEHW
AEHX
AEHY
AEDA
AEHZ
AEIA
MAX6518UKN045
MAX6518UKN035
MAX6518UKN025
MAX6518UKN015
MAX6518UKN005
MAX6518UKP005
MAX6518UKP015
MAX6518UKP035
MAX6518UKP045
MAX6518UKP055
MAX6518UKP065
MAX6518UKP075
MAX6518UKP085
MAX6518UKP095
MAX6518UKP105
MAX6518UKP115
MAX6519UKN045
MAX6519UKN035
MAX6519UKN025
MAX6519UKN015
MAX6519UKN005
MAX6519UKP005
MAX6519UKP015
MAX6519UKP035
MAX6519UKP045
MAX6519UKP055
MAX6519UKP065
MAX6519UKP075
MAX6519UKP085
MAX6519UKP095
MAX6519UKP105
MAX6519UKP115
AELL
AEDD
AELK
AELJ
AELI
PACKAGE
TYPE
PACKAGE
CODE
OUTLINE
NO.
LAND
PATTERN NO.
5 SOT23
U5+2
21-0057
90-0174
AELM
AELN
AELO
AELP
AELQ
AELR
AEDE
AELS
AELT
AELU
AELV
AEIG
AEDF
AEIF
–MAX6519
AEIB
AEIC
AELZ
AEDB
AELY
AELX
AELW
AEMA
AEMB
AEMC
AEMD
AEME
AEMF
AEDC
AEMG
AEMH
AEMI
AEIE
AEID
AEIH
AEII
AEIS
AEIK
AEIL
AEIM
AEDG
AEIN
AEIO
AEIP
AEMJ
AEIQ
8
_______________________________________________________________________________________
Low-Cost, 2.7V to 5.5V, Analog Temperature
Sensor Switches in a SOT23
–MAX6519
Functional Diagram
OUT
V
MAX6516/MAX6518 (HOT THRESHOLD)
TOVER
TOVER
NEGATIVE
TEMPCO
REFERENCE
FIXED
REFERENCE
HYST
NETWORK
HYST
TEMP
TEMP
TEMP
TEMP
MAX6516/
MAX6518
COLD
+25°C
T
HOT
TH
OUT
V
MAX6517/MAX6519 (HOT THRESHOLD)
TOVER
TUNDER
TUNDER
WITH 100kΩ PULLUP
TOVER
NEGATIVE
TEMPCO
REFERENCE
FIXED
REFERENCE
HYST
NETWORK
HYST
OUT
MAX6517/
MAX6519
COLD
+25°C
T
TH
HOT
V
MAX6516/MAX6518 (COLD THRESHOLD)
TUNDER
HYST
NEGATIVE
TEMPCO
REFERENCE
FIXED
REFERENCE
HYST
NETWORK
MAX6516/
MAX6518
COLD
T
+25°C
HOT
TH
OUT
V
MAX6517/MAX6519 (COLD THRESHOLD)
WITH 100kΩ PULLUP
TUNDER
NEGATIVE
TEMPCO
REFERENCE
FIXED
REFERENCE
HYST
NETWORK
HYST
MAX6517/
MAX6519
COLD
T
+25°C
HOT
TH
_______________________________________________________________________________________
9
Low-Cost, 2.7V to 5.5V, Analog Temperature
Sensor Switches in a SOT23
Revision History
REVISION REVISION
PAGES
CHANGED
DESCRIPTION
NUMBER
DATE
0
11/03
Initial release
—
Changed the leaded parts to lead(Pb)-free parts in the Ordering Information table; in
the Absolute Maximum Ratings section changed the continuous power dissipation
numbers (7.1mW/°C to 3.1mW/°C and 571mW to 247mW); added the Package
Information table
1
2/11
1, 2, 8
–MAX6519
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
10 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2011 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.
相关型号:
MAX6516UKP075+
Single Trip Point Switch/Digital Sensor, 1.50Cel, BICMOS, Rectangular, 5 Pin, Surface Mount, SOT-23, 6 PIN
MAXIM
MAX6516UKP085-T
Single Trip Point Switch/Digital Sensor, 1.50Cel, BICMOS, Rectangular, 5 Pin, Surface Mount, MO-178-AA, SOT-23, 5 PIN
MAXIM
MAX6516UKP095-T
Single Trip Point Switch/Digital Sensor, 1.50Cel, BICMOS, Rectangular, 5 Pin, Surface Mount, MO-178-AA, SOT-23, 5 PIN
MAXIM
MAX6516UKP105-T
Single Trip Point Switch/Digital Sensor, 1.50Cel, BICMOS, Rectangular, 5 Pin, Surface Mount, MO-178-AA, SOT-23, 5 PIN
MAXIM
MAX6516UKP115-T
Single Trip Point Switch/Digital Sensor, 1.50Cel, BICMOS, Rectangular, 5 Pin, Surface Mount, MO-178-AA, SOT-23, 5 PIN
MAXIM
©2020 ICPDF网 联系我们和版权申明