MAX7453EVKIT [MAXIM]
Compatible with Standard Video Test Equipment;型号: | MAX7453EVKIT |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | Compatible with Standard Video Test Equipment |
文件: | 总6页 (文件大小:112K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
19-1371; Rev 0; 11/07
MAX7453 Evaluation Kit
Evluates:MAX7453
General Description
Features
♦ 5V Single-Supply Voltage
The MAX7453 evaluation kit (EV kit) evaluates the
MAX7453, a low-cost, triple-channel video reconstruc-
tion filter for S-video and CVBS video-signal applica-
tions. The EV kit operates from a 5V single-supply
voltage. The MAX7453 EV kit’s video input signals are
AC-coupled, while the video output signals can be
AC- or DC-coupled.
♦ Compatible with Standard Video Test Equipment
♦ Standard 75Ω Input/Output Terminations
♦ AC-Coupled Inputs
♦ AC- or DC-Coupled Outputs
♦ Surface-Mount Construction
♦ Fully Assembled and Tested
Component List
Ordering Information
DESIGNATION QTY
DESCRIPTION
PART
TYPE
1µF 10ꢀ, 16V X7R ceramic
capacitor (0603)
Murata GRM188R71C105K
MAX7453EVKIT+
EV Kit
C1
1
3
4
+Denotes lead-free and RoHS-compliant.
0.1µF 10ꢀ, 16V X7R ceramic
capacitors (0603)
Murata GRM188R71C104K
C2, C3, C4
C5–C8
220µF 20ꢀ, 6.3V aluminum
electrolytic capacitors (6.3mm x 6mm)
SANYO 6CV220AX
C_IN, C_OUT,
CV_OUT1,
CV_OUT2,
6
5
75Ω BNC PCB-mount connectors
Y_IN, Y_OUT
CIN, COUT,
CVOUT, YIN,
YOUT
Mini test points (red)
GND
JU1–JU4
R1–R6
2
4
6
Mini test points (black)
2-pin headers, 0.1in centers
75Ω 1ꢀ resistors (0603)
Maxim triple-channel video
reconstruction filter and buffer for
composite and Y/C outputs
MAX7453CSA+ (8-pin SO)
U1
1
—
—
4
1
Shunts
PCB: MAX7453 Evaluation Kit+
Component Suppliers
SUPPLIER
PHONE
WEBSITE
Murata Mfg. Co., Ltd.
SANYO NA Corp.
770-436-1300
619-661-6835
www.murata.com
www.sanyodevice.com
Note: Indicate that you are using the MAX7453 when contacting these component suppliers.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAX7453 Evaluation Kit
Quick Start
Recommended Equipment
Before beginning, the following equipment is needed:
Detailed Description
The MAX7453 EV kit evaluates the MAX7453 triple-
channel video reconstruction filter and buffer. The EV
kit operates from a 5V single-supply voltage.
•
•
5V DC power supply (VCC)
The MAX7453 EV kit uses 0.1µF ceramic capacitors to
AC-couple the video input signals to the YIN and CIN
input pins of the MAX7453. The input capacitor stores a
DC level such that the outputs are clamped to the
appropriate DC voltage level. Both video input termi-
nals have a 75Ω termination to ground.
Video signal generator (e.g., Tektronix TG2000 or
similar)
•
Video measurement equipment (e.g., Tektronix
VM700A or similar)
Procedure
The MAX7453 EV kit video output signals can be DC- or
AC-coupled. At default, all jumpers (JU1–JU4) have no
shunts installed and each of the outputs are configured
to drive AC-coupled video loads. As configured, YOUT
and COUT each drive a 150Ω video (75Ω backmatch
resistor plus a standard 75Ω video cable). The compos-
ite video output CVOUT drives two 150Ω video loads.
The MAX7453 EV kit is fully assembled and tested.
Follow the steps below to verify board operation.
Caution: Do not turn on the power supply until all
connections are completed.
1) Verify that no shunts are installed across jumpers
JU1–JU4 (AC-coupled outputs).
2) Connect the luma output from the video signal gen-
erator to the Y_IN BNC connector on the EV kit.
JU1–JU4 Jumper Selection
(Output Coupling)
Evluates:MAX7453
3) Connect the chroma output from the video signal
generator to the C_IN BNC connector on the EV kit.
The MAX7453 EV kit provides jumpers JU1–JU4 to con-
figure the video outputs to AC- or DC-coupling. At
default, each of the MAX7453’s AC-coupled outputs
include a 220µF series capacitor. To drive the output
video load directly, short the AC-coupling capacitor by
placing a shunt across the provided jumper. See Table
1 for shunt positions.
4) Connect the input of the video measurement equip-
ment to the Y_OUT, C_OUT, CV_OUT1, or
CV_OUT2 BNC connectors on the EV kit.
5) Connect the 5V supply to the VCC pad on the EV
kit. Connect the power-supply ground to the GND
pad on the EV kit.
Table 1. JU1–JU4 Jumper Selection
(C_OUT, CV_OUT1, CV_OUT2, Y_OUT)
6) Set the signal generator for the desired video sig-
nal, such as multiburst.
7) Turn on the 5V DC power supply.
VIDEO OUTPUT’S COUPLING
SHUNT POSITION
8) Analyze the video output signals with the video
measurement equipment.
CONFIGURATION
Installed
Not installed*
DC-coupling
AC-coupling
*Default position.
2
_______________________________________________________________________________________
MAX7453 Evaluation Kit
Evluates:MAX7453
C5
220μF
6.3V
R3
75Ω
1%
YOUT
8
7
VCC
4.75V TO 5.25V
YOUT
Y_OUT
V
CC
JU1
C1
C2
1μF
0.1μF
C6
220μF
6.3V
R4
75Ω
1%
3
GND
YIN
GND
Y_IN
CV_OUT1
U1
JU2
CVOUT
MAX7453
YIN
CIN
C3
0.1μF
6
CVOUT
1
C7
220μF
6.3V
R5
75Ω
1%
R1
75Ω
1%
CV_OUT2
C4
0.1μF
JU3
4
2
CIN
C_IN
R2
C8
220μF
6.3V
R6
75Ω
1%
75Ω
1%
COUT
GND
5
N.C.
COUT
C_OUT
JU4
GND
Figure 1. MAX7453 EV Kit Schematic
_______________________________________________________________________________________
3
MAX7453 Evaluation Kit
Evluates:MAX7453
Figure 2. MAX7453 EV Kit Component Placement Guide—Top Silkscreen
4
_______________________________________________________________________________________
MAX7453 Evaluation Kit
Evluates:MAX7453
Figure 3. MAX7453 EV Kit PCB Layout—Component Side
_______________________________________________________________________________________
5
MAX7453 Evaluation Kit
Evluates:MAX7453
Figure 4. MAX7453 EV Kit PCB Layout—Solder Side
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
6 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2007 Maxim Integrated Products
is a registered trademark of Maxim Integrated Products, Inc.
相关型号:
©2020 ICPDF网 联系我们和版权申明