MAX919EUK/V+T [MAXIM]
Comparator, 1 Func, 10000uV Offset-Max, 95000ns Response Time, PDSO5, ROHS COMPLIANT, SOT-23, 5 PIN;![MAX919EUK/V+T](http://pdffile.icpdf.com/pdf1/p00120/img/icpdf/MAX9117_661461_icpdf.jpg)
型号: | MAX919EUK/V+T |
厂家: | ![]() |
描述: | Comparator, 1 Func, 10000uV Offset-Max, 95000ns Response Time, PDSO5, ROHS COMPLIANT, SOT-23, 5 PIN |
文件: | 总10页 (文件大小:174K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
MAX9118EXK
Rev. B
RELIABILITY REPORT
FOR
MAX9118EXK
PLASTIC ENCAPSULATED DEVICES
April 6, 2004
MAXIM INTEGRATED PRODUCTS
120 SAN GABRIEL DR.
SUNNYVALE, CA 94086
Written by
Reviewed by
Jim Pedicord
Quality Assurance
Reliability Lab Manager
Bryan J. Preeshl
Quality Assurance
Executive Director
Conclusion
The MAX9118 successfully meets the quality and reliability standards required of all Maxim products. In addition,
Maxim’s continuous reliability monitoring program ensures that all outgoing product will continue to meet Maxim’s quality
and reliability standards.
Table of Contents
I. ........Device Description
II. ........Manufacturing Information
III. .......Packaging Information
V. ........Quality Assurance Information
VI. .......Reliability Evaluation
IV. .......Die Information
.....Attachments
I. Device Description
A. General
The MAX9118 nanopower comparator a in space-saving SC70 packages feature Beyond-the-Rails™ inputs and are
is guaranteed to operate down to +1.8V. The MAX9118 features an on-board 1.252V ±1.75% reference and draw an
ultra-low supply current of only 600nA. This feature makes the MAX9118 comparator ideal for all 2-cell battery
monitoring/management applications.
The unique design of the output stage limits supply-current surges while switching, virtually eliminating the supply
glitches typical of many other comparators. This design also minimizes overall power consumption under dynamic
conditions. The MAX9118 has an open-drain output stage that makes them suitable for mixed-voltage system
design. Large internal output drivers allow Rail-to-Rail® output swing with loads up to 5mA. The device is available in
the ultra-small 5-pin SC70 package.
B. Absolute Maximum Ratings
Item
Rating
Supply Voltage (VCC to VEE)
Voltage Inputs (IN+, IN-, REF)
Output Voltage
+6V
(VEE - 0.3V) to (VCC + 0.3V)
(VEE - 0.3V) to (VCC + 0.3V)
Current Into Input Pins
20mA
Output Current
±50mA
Output Short-Circuit Duration
Operating Temperature Range
Junction Temperature
10s
-40°C to +85°C
+150°C
Storage Temperature Range
Lead Temperature (soldering, 10s)
Continuous Power Dissipation (TA = +70°C)
5-Pin SC70
-65°C to +150°C
+300°C
200mW
Derates above +70°C
5-Pin SC70
2.5mW/°C
II. Manufacturing Information
A. Description/Function:
B. Process:
SC70, 1.8V, Nanopower, Beyond-the-Rails Comparators With Reference
B8 (Standard 0.8 micron silicon gate CMOS)
C. Number of Device Transistors:
98
D. Fabrication Location:
E. Assembly Location:
F. Date of Initial Production:
California, USA
Malaysia or Philippines
January, 2001
III. Packaging Information
A. Package Type:
B. Lead Frame:
5-Pin SC70
Alloy 42 or Copper
Solder Plate
C. Lead Finish:
D. Die Attach:
Silver-Filled Epoxy
Gold (1.0 mil dia.)
Epoxy with silica filler
# 05-1501-0220
Class UL94-V0
E. Bondwire:
F. Mold Material:
G. Assembly Diagram:
H. Flammability Rating:
I. Classification of Moisture Sensitivity
per JEDEC standard J-STD-020-A:
Level 1
IV. Die Information
A. Dimensions:
31 x 30 mils
B. Passivation:
Si3N4/SiO2 (Silicon nitride/ Silicon dioxide)
C. Interconnect:
Aluminum/Si (Si = 1%)
None
D. Backside Metallization:
E. Minimum Metal Width:
F. Minimum Metal Spacing:
G. Bondpad Dimensions:
H. Isolation Dielectric:
I. Die Separation Method:
0.8 microns (as drawn)
0.8 microns (as drawn)
5 mil. Sq.
SiO2
Wafer Saw
V. Quality Assurance Information
A. Quality Assurance Contacts:
Jim Pedicord (Reliability Lab Manager)
Bryan Preeshl (Executive Director)
Kenneth Huening (Vice President)
B. Outgoing Inspection Level:
0.1% for all electrical parameters guaranteed by the Datasheet.
0.1% For all Visual Defects.
C. Observed Outgoing Defect Rate: < 50 ppm
D. Sampling Plan: Mil-Std-105D
VI. Reliability Evaluation
A. Accelerated Life Test
The results of the 135°C biased (static) life test are shown in Table 1. Using these results, the Failure
Rate (l ) is calculated as follows:
l =
1
=
1.83
(Chi square value for MTTF upper limit)
MTTF
192 x 4389 x 80 x 2
Temperature Acceleration factor assuming an activation energy of 0.8eV
l = 13.57 x 10-9
l = 13.57 F.I.T. (60% confidence level @ 25°C)
This low failure rate represents data collected from Maxim’s reliability monitor program. In addition to
routine production Burn-In, Maxim pulls a sample from every fabrication process three times per week and subjects
it to an extended Burn-In prior to shipment to ensure its reliability. The reliability control level for each lot to be
shipped as standard product is 59 F.I.T. at a 60% confidence level, which equates to 3 failures in an 80 piece
sample. Maxim performs failure analysis on any lot that exceeds this reliability control level. Attached Burn-In
Schematic (Spec. # 06-5415) shows the static Burn-In circuit. Maxim also performs quarterly 1000 hour life test
monitors. This data is published in the Product Reliability Report (RR-1M).
B. Moisture Resistance Tests
Maxim pulls pressure pot samples from every assembly process three times per week. Each lot sample
must meet an LTPD = 20 or less before shipment as standard product. Additionally, the industry standard
85°C/85%RH testing is done per generic device/package family once a quarter.
C. E.S.D. and Latch-Up Testing
The CM82-1 die type has been found to have all pins able to withstand a transient pulse of ±2000V, per Mil-
Std-883 Method 3015 (reference attached ESD Test Circuit). Latch-Up testing has shown that this device
withstands a current of ±250mA.
Table 1
Reliability Evaluation Test Results
MAX9118EXK
FAILURE
TEST ITEM
TEST CONDITION
SAMPLE
SIZE
NUMBER OF
FAILURES
IDENTIFICATION
PACKAGE
Static Life Test (Note 1)
Ta = 135°C
Biased
DC Parameters
& functionality
80
0
Time = 192 hrs.
Moisture Testing (Note 2)
Pressure Pot
Ta = 121°C
P = 15 psi.
RH= 100%
Time = 168hrs.
DC Parameters
& functionality
SC70
77
77
0
0
85/85
Ta = 85°C
RH = 85%
Biased
DC Parameters
& functionality
Time = 1000hrs.
Mechanical Stress (Note 2)
Temperature
Cycle
-65°C/150°C
1000 Cycles
Method 1010
DC Parameters
& functionality
77
0
Note 1: Life Test Data may represent plastic DIP qualification lots.
Note 2: Generic Package/Process data
Attachment #1
TABLE II. Pin combination to be tested. 1/ 2/
Terminal A
Terminal B
(The common combination
of all like-named pins
(Each pin individually
connected to terminal A
with the other floating)
connected to terminal B)
All pins except VPS1 3/
All input and output pins
All VPS1 pins
1.
2.
All other input-output pins
1/ Table II is restated in narrative form in 3.4 below.
2/ No connects are not to be tested.
3/ Repeat pin combination I for each named Power supply and for ground
(e.g., where VPS1 is VDD, VCC, VSS, VBB, GND, +VS, -VS, VREF, etc).
3.4
a.
Pin combinations to be tested.
Each pin individually connected to terminal A with respect to the device ground pin(s) connected
to terminal B. All pins except the one being tested and the ground pin(s) shall be open.
b.
Each pin individually connected to terminal A with respect to each different set of a combination
of all named power supply pins (e.g., V , or V
or V
or VCC1, or VCC2) connected to
SS1
SS2
SS3
terminal B. All pins except the one being tested and the power supply pin or set of pins shall be
open.
c.
Each input and each output individually connected to terminal A with respect to a combination of
all the other input and output pins connected to terminal B. All pins except the input or output pin
being tested and the combination of all the other input and output pins shall be open.
TERMINAL C
R2
R1
S1
TERMINAL A
REGULATED
HIGH VOLTAGE
SUPPLY
DUT
S2
SHORT
SOCKET
C1
CURRENT
PROBE
(NOTE 6)
TERMINAL B
R = 1.5kW
C = 100pf
TERMINAL D
Mil Std 883D
Method 3015.7
Notice 8
ONCE PER SOCKET
ONCE PER BOARD
10
1 MEG
+5 VOLTS
1
8
7
6
5
2
3
4
8- NSO
DEVICES: MAX 917/918/919/920/9117/9118/9119/9120.
MAX. EXPECTED CURRENT = 5 uA
DRAWN BY: TODD BEJSOVEC
N
DOCUMENT I.D. 06-5415
REVISION B
MAXIM TITLE: 883 BI Circuit (MAX 917/918/919/920/9117/9118/9119/9120)
PAGE 2 OF 3
相关型号:
![](http://pdffile.icpdf.com/pdf1/p00082/img/page/MAX9201_429708_files/MAX9201_429708_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00082/img/page/MAX9201_429708_files/MAX9201_429708_2.jpg)
MAX9201EUE+
Comparator, 4 Func, 7500uV Offset-Max, 7ns Response Time, BIPolar, PDSO16, TSSOP-16
MAXIM
![](http://pdffile.icpdf.com/pdf1/p00082/img/page/MAX9201_429708_files/MAX9201_429708_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00082/img/page/MAX9201_429708_files/MAX9201_429708_2.jpg)
MAX9201EUE+T
Comparator, 4 Func, 7500uV Offset-Max, 7ns Response Time, BIPolar, PDSO16, ROHS COMPLIANT, TSSOP-16
MAXIM
©2020 ICPDF网 联系我们和版权申明