MAX9406EVKIT [MAXIM]
Level Shifter of 5V to 3.3V for the Hot-Plug Detection (HPD) Pin;型号: | MAX9406EVKIT |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | Level Shifter of 5V to 3.3V for the Hot-Plug Detection (HPD) Pin 光电二极管 |
文件: | 总10页 (文件大小:536K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
19-4369; Rev 0; 11/08
MAX9406 Evaluation Kit
Evluates:MAX9406
General Description
Features
®
The MAX9406 PCIe -To-HDMI™ evaluation kit (EV kit) is
a fully assembled and tested circuit board that demon-
strates the capabilities of the MAX9406 DisplayPort™ to
DVI™/HDMI level shifter. The correct version of the Intel
graphics chipset driver and video BIOS need to be
installed properly to use the MAX9406 EV kit.
♦ > 400mV Differential HDMI Output at 2Gbps Data
Rate
♦ < 450ps Propagation Delay
♦ < 20ps Channel-to-Channel Skew at 2Gbps
♦ Low Intrinsic Jitter: DJ < 7psP-P and RJ < 1psRMS
The MAX9406 EV kit should be plugged into a PCI
♦ Human Body Model (HBM) is 4kV on ꢀll Pins and
®
Express (PCIe) bus slot on a PC that supports
CDM is 1kV on Cable Connection Pins
DisplayPort as defined by VESA, such as Intel’s
Eaglelake/Cantiga chipset with an integrated graphics
controller.
♦ Bidirectional Level Shifter of 5V to 3.3V for
Display Data Channel (DDC) Pins
♦ Level Shifter of 5V to 3.3V for the Hot-Plug
The MAX9406 EV kit PCB comes with a MAX9406ETJ+
installed (32-pin thin QFN package with an exposed pad).
Detection (HPD) Pin
♦ Proven PCB Layout
♦ Lead(Pb)-Free and RoHS Compliant
♦ Fully ꢀssembled and Tested
PCIe and PCI Express are registered trademarks of
PCI-SIG Corp.
Ordering Information
HDMI is a trademark of HDMI Licensing, LLC.
PꢀRT
TYPE
DisplayPort is a trademark of Video Electronics Standards
Association (VESA).
MAX9406EVKIT+
EV Kit
DVI is a trademark of Digital Display Working Group (DDWG).
+Denotes lead(Pb)-free and RoHS compliant.
Component List
DESIGNꢀTION QTY
DESCRIPTION
DESIGNꢀTION QTY
DESCRIPTION
22µF 10ꢀ, 6.3V XꢁR ceramic
capacitors (1206)
Murata GRM31CR60J226M
Q1
R2, R4
R3
1
2
1
n-channel enhancement DMOS FET
2.2kΩ ꢁꢀ resistors (0603)
1.00kΩ 1ꢀ resistor (0603)
C1, C2,
4
C16, C19
C3, C4,
0.1µF 10ꢀ, 2ꢁV X7R ceramic
capacitors (0603)
Murata GRM188R71E104K
Rꢁ, R14,
R16, R17
C7–C14, C17,
C18, C20, C21,
4
6
ꢁ
20kΩ ꢁꢀ resistors (0603)
1.ꢁkΩ ꢁꢀ resistors (0603)
100kΩ ꢁꢀ resistors (0603)
17
C22, C2ꢁ, C26
R6–R9,
R12, R19
10µF 10ꢀ, 6.3V XꢁR ceramic
capacitor (080ꢁ)
Murata GRM21BR60J106K
Cꢁ
1
R10, R11, R37,
R38, R41
2.2µF 10ꢀ, 2ꢁV XꢁR ceramic
capacitors (080ꢁ)
Murata GRM219R61E22ꢁK
R13, R1ꢁ
R18
2
1
0
8
1
1
1
10kΩ ꢁꢀ resistors (0603)
7.ꢁkΩ ꢁꢀ resistor (0603)
Not installed, resistors (0603)
0Ω ꢁꢀ resistors (0603)
0.1Ω 1ꢀ resistor (0603)
1.00MΩ 1ꢀ resistor (0603)
47kΩ ꢁꢀ resistor (0603)
C6, C1ꢁ,
C23, C24
4
0
R20–R27
R28–R3ꢁ
R36
Not installed, PCIe bus (gold finger
pads on PCB)
J1
J2
1
9
HDMI connector
3-pin headers
R39
J3–J11
R40
600Ω, 1.ꢁA ferrite bead (1206)
Murata BLM31PG601SH1L
L1
1
Pushbutton switch (SMT, 6.6mm x
6mm)
SW1
SW2
1
0
Not installed, slide switch
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAX9406 Evaluation Kit
Component List (continued)
DESIGNꢀTION QTY
DESCRIPTION
DESIGNꢀTION QTY
DESCRIPTION
High-speed differential ESD-
protectors (10 µMAX )
Maxim MAX3208EAUB+
(Top Mark: 3208 EAUB+)
Not installed, test point (standard via,
0.39in drill, solder-mask opening)
TP1
0
®
U4, U6, U7
Uꢁ
3
1
DisplayPort level shifter
(32 TQFN-EP*)
Maxim MAX9406ETJ+
U1
1
Low-voltage open-drain inverter
(14 SO)
Fairchild 74LCX06M
(Top Mark: LCX06)
Low-dropout linear regulator (8 SO)
Maxim MAX16ꢁ9ESA+
U2
1
1
Two-wire serial EEPROM 2K (2ꢁ6 x 8)
(8 SO)
U3
U8
1
2
DisplayPort video connector
Dual FET bus switches with level
shifting (8 SO)
U9, U10
*EP = Exposed pad.
—
—
6
1
Shunts
PCB: MAX9406 Evaluation Kit+
Component Suppliers
Evluates:MAX9406
SUPPLIER
PHONE
WEBSITE
Fairchild Semiconductor
888-ꢁ22-ꢁ372
770-436-1300
www.fairchildsemi.com
Murata Electronics North America, Inc.
www.murata-northamerica.com
Note: Indicate that you are using the MAX9406 when contacting these component suppliers.
2) Check if the graphics driver and video BIOS are
Quick Start
Recommended Equipment
Before beginning, the following equipment is needed:
already installed by moving the mouse pointer
(arrow) all the way down to the bottom of the primary
display to show the task bar. Look at the notification
area (system tray) at the right side of the task bar to
find the Digital Display utility. If not found, the
graphics driver and video BIOS need to be installed.
• MAX9406 EV kit
• A PC using Intel’s Eaglelake/Cantiga chipset with an
integrated graphics controller
3) Carefully plug in the MAX9406 EV kit into an avail-
able PCIe bus slot. Connect an LCD monitor with an
HDMI interface to the HDMI plug on the MAX9406
EV kit using an HDMI cable. Or, connect an LCD
monitor with a DVI interface using a DVI-to-HDMI
conversion cable.
• A built-in laptop LCD screen or an external monitor
with a VGA interface as the primary display
• Another LCD monitor with a DVI or HDMI interface
as the secondary digital display
Note: In the following sections, software-related items
are identified by bolding. Text in bold refers to items
directly from the EV kit software. Text in bold and
underlined refers to items from the Windows® operat-
ing system.
4) The secondary monitor connected through the HDMI
port will light up if the digital display is enabled. If no
video appears, move the mouse pointer (arrow) all
the way down to the bottom of the primary display to
show the task bar. Further, move the mouse pointer
to the notification area at the right side of the task
bar and onto the Digital Display utility. Right click
the Display Port and then select the Digital Display
and Monitor option. The LCD monitor connected to
the EV kit will light up.
Procedure
The MAX9406 EV kit is fully assembled and configured
for HDMI output on J2. Follow the steps below to verify
board operation:
1) Verify that all jumpers (J3–J11) are in their default
positions, as shown in Table 1.
µMAX is a registered trademark of Maxim Integrated Products, Inc.
Windows is a registered trademark of Microsoft Corp.
2
_______________________________________________________________________________________
MAX9406 Evaluation Kit
Evluates:MAX9406
and U7) provide ESD protection for both high-speed
and DDC channels on the HDMI interface. The
AT24C02 EEPROM (U3) provides an EDID for testing
purposes. The AT24C02 is initially un-programmed.
Pullup resistors (1.ꢁkΩ) are provided on both PCIe and
HDMI sides of the DDC channel.
Detailed Description of Hardware
The MAX9406 (U1) level shifts all four high-speed dif-
ferential data channels and the DDC channel. High-
speed channel data comes from the PCIe bus (J1),
goes through the MAX9406, and outputs at the HDMI
connector (J2). The MAX9406 is enabled by jumper J8.
The MAX9406 also relays the hot-plug detection signal
from the HDMI plug to the PCIe bus through an inverter
(Uꢁ-D) when a shunt is placed across pins 2-3 of
jumper J9. The hot-plug detection signal is amplitude-
limited to 0.9V at the PCIe bus side.
Evaluating the MAX9406
DP-to-HDMI Dongle Board
The MAX9406 EV kit can also be used to evaluate a
MAX9406-based DP-to-HDMI level-shifter dongle
board. To evaluate a dongle board, move resistors
R28–R3ꢁ to locations R20–R27 to isolate the MAX9406
on the EV kit. Note: Connector U8 is mounted at
assembly, but is not production tested.
The ꢁV supply matching the HDMI interface side is con-
verted down from the 12V supply of the PCIe bus by
the MAX16ꢁ9 (U2). Three MAX3208E chips (U4, U6,
Table 1. MꢀX9406 EV kit Jumper Descriptions (J3–J11)
JUMPER
SIGNꢀL
SHUNT POSITION
DESCRIPTION
Connected to the MAX9406
1-2*
2-3
1-2*
2-3
1-2
2-3
1-2
2-3
1-2
2-3
1-2
2-3*
1-2
2-3*
1-2*
2-3
1-2*
2-3
J3
HDMIB_CTRL_CLK
Connected to the EEPROM
Connected to the MAX9406
Connected to the EEPROM
Connected to the EEPROM
Not connected
J4
Jꢁ
HDMIB_CTRL_DATA
HDMIC_CTRL_CLK
HDMIC_CTRL_DATA
EEPROM WP
Connected to the EEPROM
Not connected
J6
Write protected (read only)
Write enabled
J7
Disabled
J8
MAX9406 Enable
Hot Plug Detection
HDMI/DP Select 1
HDMI/DP Select 2
Enabled
Manual emulation
Plug-in detection
HDMI mode
J9
J10
DP mode
HDMI mode
J11
DP mode
*Default position.
_______________________________________________________________________________________
3
MAX9406 Evaluation Kit
Evluates:MAX9406
Figure 1a. MAX9406 EV Kit Schematic (Sheet 1 of 2)
4
_______________________________________________________________________________________
MAX9406 Evaluation Kit
Evluates:MAX9406
Figure 1b. MAX9406 EV Kit Schematic (Sheet 2 of 2)
_______________________________________________________________________________________
5
MAX9406 Evaluation Kit
Evluates:MAX9406
Figure 2. MAX9406 EV Kit Component Placement Guide—Component Side
6
_______________________________________________________________________________________
MAX9406 Evaluation Kit
Evluates:MAX9406
Figure 3. MAX9406 EV Kit PCB Layout—Component Side
_______________________________________________________________________________________
7
MAX9406 Evaluation Kit
Evluates:MAX9406
Figure 4. MAX9406 EV Kit PCB Layout—Ground Layer 2
8
_______________________________________________________________________________________
MAX9406 Evaluation Kit
Evluates:MAX9406
Figure ꢁ. MAX9406 EV Kit PCB Layout—Power Layer 3
_______________________________________________________________________________________
9
MAX9406 Evaluation Kit
Evluates:MAX9406
Figure 6. MAX9406 EV Kit PCB Layout—Solder Side
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
10 __________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2008 Maxim Integrated Products
is a registered trademark of Maxim Integrated Products, Inc.
相关型号:
MAX941AUA
Comparator, 1 Func, 5500uV Offset-Max, 80ns Response Time, BIPolar, PDSO8, MICRO MAX PACKAGE-8
MAXIM
©2020 ICPDF网 联系我们和版权申明