MAX9652 [MAXIM]
Fully Assembled and Tested;型号: | MAX9652 |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | Fully Assembled and Tested |
文件: | 总5页 (文件大小:98K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
19-4264; Rev 0; 8/08
MAX9652 Evaluation Kit
Evluates:MAX9652
General Description
Features
♦ Single 3.3V Supply Operation
The MAX9652 evaluation kit (EV kit) is a fully assembled
and tested surface-mount PCB that contains the
MAX9652 triple-channel, video-filter amplifier for high-
definition television (HDTV) applications. The filter’s
passband is typically 42MHz. The video inputs on the
EV kit are AC-coupled; the video outputs can be AC- or
DC-coupled. In addition, the MAX9652 video inputs are
terminated with 75Ω and the video outputs have a 75Ω
back termination resistor. The EV kit operates from a
single 3.3V DC power supply.
♦ Output Buffer with a 2V/V Gain
♦ High-Definition Television Video Filter
♦ AC-Coupled Inputs
♦ Standard 75Ω Input/Output Terminations
♦ Surface-Mount Components
♦ Fully Assembled and Tested
Ordering Information
PART
TYPE
MAX9652EVKIT+
EV Kit
+Denotes lead-free and RoHS compliant.
Component List
DESIGNATION QTY
DESCRIPTION
DESIGNATION QTY
DESCRIPTION
PB_INPUT,
PB_OUTPUT,
0.1μF 10%, 16V X7R ceramic
capacitors (0603)
C1, C2, C3, C9
C4, C7, C8
C10
4
0
1
PR_INPUT,
PR_OUTPUT,
Y_INPUT,
Y_OUTPUT
75ꢀ BNC PCB vertical-mount
connectors
Murata GRM188R71C104K
6
Not installed, ceramic capacitors
(0603)
10μF 10%, 6.3V X5R ceramic
capacitor (0603)
Murata GRM21BR60J106K
R1–R6
6
3
75ꢀ 5% resistors (0603)
0ꢀ 5% resistors (0603)
R7, R8, R9
3-channel high-definition video filter
(8 SO)
Maxim MAX9652ASA+
U1
—
1
1
PCB: MAX9652 Evaluation Kit+
Component Supplier
SUPPLIER
Murata Electronics North America, Inc.
PHONE
WEBSITE
770-436-1300
www.murata-northamerica.com
Note: Indicate that you are using the MAX9652 when contacting this component supplier.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAX9652 Evaluation Kit
Quick Start
Recommended Equipment
Before beginning, the following equipment is needed:
Detailed Description of
Hardware
The MAX9652 EV kit is a fully assembled and tested
surface-mount PCB that contains the MAX9652 triple-
channel, video-filter amplifier and buffer for HDTV appli-
cations. The MAX9652 filter has 1dB passband out to
42MHz and 50dB attenuation at 109MHz. The
MAX9652 EV kit has three input channels to accept a
full set of component video input signals.
• 3.3V DC power supply (VDD) capable of 50mA
• Video signal generator (e.g., Tektronix TG-700 or similar)
• The appropriate video measurement equipment
(e.g., Tektronix VM5000)
Procedure
The MAX9652 EV kit is fully assembled and tested.
Follow the steps below to verify board operation:
The MAX9652 EV kit uses 0.1µF ceramic capacitors to
AC-couple the video input signals to the MAX9652. The
input capacitor stores a DC level such that the outputs
are clamped to the appropriate DC voltage level. All
video inputs have a 75Ω termination to ground. The
MAX9652 EV kit video outputs can be DC- or AC-cou-
pled. By default, 0Ω resistors are installed on R7, R8,
R9, and C4, C7, and C8 are open; each of the outputs
are configured to drive DC-coupled video loads. To
configure the outputs to drive the AC-coupled video
loads, remove R7, R8, and R9, and install the 220µF
capacitors on C4, C7, and C8.
1) Connect the outputs of the video signal generator to
the Y_INPUT, PB_INPUT, and PR_INPUT BNC con-
nectors on the MAX9652 EV kit.
2) Connect the Y_OUTPUT, PB_OUTPUT, AND
PR_OUTPUT BNC connectors on the EV kit to the
input of the video measurement equipment.
3) Connect the power-supply ground to the GND pad
on the EV kit.
Evluates:MAX9652
4) Connect the 3.3V supply to the VDD pad on the EV kit.
5) Set the video signal generator for the desired video
input signals.
6) Turn on the power supply and enable the video sig-
nal generator.
7) Analyze the video output signal.
2
_______________________________________________________________________________________
MAX9652 Evaluation Kit
Evluates:MAX9652
Figure 1. MAX9652 EV Kit Schematic
_______________________________________________________________________________________
3
MAX9652 Evaluation Kit
Evluates:MAX9652
Figure 2. MAX9652 EV Kit Component Placement Guide—
Component Side
Figure 3. MAX9652 EV Kit PCB Layout—Component Side
4
_______________________________________________________________________________________
MAX9652 Evaluation Kit
Evluates:MAX9652
Figure 4. MAX9652 EV Kit PCB Layout—Solder Side
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 _____________________ 5
© 2008 Maxim Integrated Products
is a registered trademark of Maxim Integrated Products, Inc.
相关型号:
MAX9655AEP+
Video Multiplexer, PDSO20, 0.150 INCH, 0.025 INCH PITCH, ROHS COMPLIANT, MO137, QSOP-20
MAXIM
©2020 ICPDF网 联系我们和版权申明