MAX9736AEVKIT [MAXIM]
Shutdown and Mute Control;型号: | MAX9736AEVKIT |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | Shutdown and Mute Control |
文件: | 总10页 (文件大小:249K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
19-4071; Rev 1; 9/09
MAX9736A Evaluation Kit
Evluates:/MAX9736B
General Description
Features
The MAX9736A evaluation kit (EV kit) is a fully assembled
and tested printed-circuit board (PCB) that configures
the MAX9736A Class D amplifier to drive 2 x 15W into a
pair of 8Ω speakers in stereo mode, or 1 x 30W into a
4Ω speaker in mono mode for audio applications. The
EV kit operates from an 8V to 28V DC power supply
and is configured for +17.1dB gain. The MAX9736A EV
kit accepts a pair of single-ended input signals and
provides two sets of differential outputs for speakers.
♦ 8V to 28V Single DC Power-Supply Operation
♦ Fully Differential Outputs
♦ Drives 2 x 15W into 8Ω Speakers in Stereo Mode
♦ Drives 1 x 30W into 4Ω Speaker in Mono Mode
♦ Shutdown and Mute Control
♦ Selectable Modulation Scheme
The MAX9736A EV kit provides an option to control the
shutdown, mute, modulation scheme, and mono mode
of the MAX9736A. The EV kit includes convenient audio
input and output connectors and the required output fil-
ters to ease evaluation. The MAX9736A EV kit can also
evaluate the MAX9736B after IC replacement (U1).
♦ Evaluates the MAX9736A/MAX9736B in 32-Pin
TQFN-EP Package
♦ Fully Assembled and Tested
Ordering Information
PART
TYPE
MAX9736AEVKIT+
EV Kit
+Denotes lead(Pb)-free and RoHS compliant.
Component List
DESIGNATION
QTY
DESCRIPTION
DESIGNATION
QTY
DESCRIPTION
OPTIONAL COMPONENTS FOR CUSTOMER
1µF 10ꢀ, 10V X7R ceramic
capacitor (0603)
MINIMAL COMPONENTS FOR CUSTOMER DESIGN
220µF 20ꢀ, 35V aluminum
electrolytic capacitor
(10mm x 12.5mm)
C7
1
0
C1
1
Murata GRM188R71A105K
Panasonic EEUFM1V221
C13–C16
C17–C26
Not installed, capacitors (0603)
0.1µF 10ꢀ, 50V X7R ceramic
capacitors (0603)
Murata GRM188R71H104K
0.15µF 10ꢀ, 50V X7R ceramic
capacitors (0805)
C3, C4, C5
C6
3
1
3
10
Murata GRM21BR71H154K
1µF 10ꢀ, 16V X7R ceramic
capacitor (0603)
Murata GRM188R71C105K
4.3V, 20mA zener diode (SOT23)
Central CMPZ5229B
(Top Mark: C8D)
D1
1
1
6
1µF 10ꢀ, 10V X7R ceramic
capacitors (0603)
Ferrite bead, 22Ω at 100MHz,
10mΩ DCR, 6A (0805)
Murata BLM21PG220SN1D
C8, C9, C10
FB1
Murata GRM188R71A105K
1µF 10ꢀ, 25V X7R ceramic
capacitors (0805)
Murata GRM21BR71E105K
FOUTL-, FOUTL+,
FOUTR-, FOUTR+,
VDD, PGND
C11, C12
R2–R5
C2
2
4
1
Binding posts
20kΩ 1ꢀ resistors (0603)
JU1
JU2–JU5
JU6
1
4
0
3-pin header
0.1µF 10ꢀ, 50V X7R ceramic
capacitor (0603)
2-pin headers
Not installed 2-pin header
Murata GRM188R71H104K
*EP = Exposed pad.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAX9736A Evaluation Kit
Component List (continued)
DESIGNATION
QTY
DESCRIPTION
DESIGNATION
QTY
DESCRIPTION
R14–R18
5
100kΩ 5ꢀ resistors (0603)
PCB mini test points, 0.040in
(white)
L-, L+
2
Class D audio amplifier
(32 TQFN-EP*)
Maxim MAX9736AETJ+
U1
1
RCA phono jack, side entry,
PCB mount (white)
LIN
1
15µH 20ꢀ, 3.1A inductors
Sumida CDRH104RNP-150NC
—
—
5
4
Shunts
L1–L4
R-, R+
RIN
4
2
1
0.250in x 0.500in,
4-40 round nylon spacers
PCB mini test points, 0.040in (red)
RCA phono jack, side entry,
PCB mount (red)
4-40 x 0.375in nylon machine
screws
—
4
1
R1
1
4
4
10kΩ 5ꢀ resistor (0603)
0Ω 5ꢀ resistors (0805)
15Ω 5ꢀ resistors (1206)
—
PCB: MAX9736A Evaluation Kit+
R6–R9
R10–R13
*EP = Exposed pad.
Component Suppliers
SUPPLIER
PHONE
WEBSITE
www.centralsemi.com
www.murata-northamerica.com
www.panasonic.com
Central Semiconductor Corp.
Murata Electronics North America, Inc.
Panasonic Corp.
631-435-1110
770-436-1300
800-344-2112
847-545-6700
847-803-6100
201-785-8800
Sumida Corp.
www.sumida.com
TDK Corp.
www.component.tdk.com
www.we-online.com
Würth Electronik GmbH & Co. KG
Note: Indicate that you are using the MAX9736A or MAX9736B when contacting these component suppliers.
5) Install a shunt across jumper JU5 (MOD = high,
Quick Start
Required Equipment
Evluates:/MAX9736B
filterless modulation scheme).
6) Connect the first speaker across the FOUTL- and
FOUTL+ PCB binding posts.
•
•
•
8V to 28V, 5A DC power supply
Audio source with volume control (e.g., CD player, etc.)
Two speakers
7) Connect the second speaker across the FOUTR-
and FOUTR+ PCB binding posts.
8) Connect the positive terminal of the power supply to
the VDD binding post and the power-supply ground
terminal to the PGND binding post.
Procedures
The MAX9736A EV kit is fully assembled and tested.
Follow the steps below to verify board operation.
Caution: Do not turn on the power supply until all
connections are completed.
9) Connect the left output terminal of the audio source
to the LIN RCA phono jack.
1) Install a shunt across pins 1-2 of jumper JU1 (DVDD
= 5V).
10) Connect the right output terminal of the audio
source to the RIN RCA phono jack.
2) Install a shunt across jumper JU2 (SHDN = high, EV
11) Turn on the audio source at minimum volume.
12) Turn on the power supply.
kit enabled).
3) Install a shunt across jumper JU3 (REGEN = high,
internal regulator enabled).
13) Gradually increase the audio source volume until
audio is heard through the loud speakers.
4) Install a shunt across jumper JU4 (MUTE = high,
output enabled).
2
_______________________________________________________________________________________
MAX9736A Evaluation Kit
Evluates:/MAX9736B
The speaker wire should be connected to L+, L-, R+,
and R- test points using twisted-pair cable.
Detailed Description of Hardware
The MAX9736A EV kit is designed to evaluate the
MAX9736A in a 32-pin TQFN-EP package. The
MAX9736A is a Class D amplifier that can be config-
ured to drive 2 x 15W into a pair of 8Ω speakers, or 1 x
30W into a 4Ω speaker. The EV kit operates from a DC
power supply that provides 8V to 28V and 5A of current.
The EV kit PCB is designed with two layers and has 2oz
copper for optimized power dissipation. The MAX9736A
EV kit accepts a pair of single-ended input signals and
provides two sets of amplified differential audio outputs.
Although component selection for the output filter is
dependent on speaker-wire length, the components in
Table 1 are provided with the EV kit as a starting point.
Final component selection should be determined during
EMC testing. Contact the factory if required.
Table 1. Recommended EMI Filter
Components for 8Ω Loads
COMPONENT
DESCRIPTION
Ferrite beads, 600Ω at 100MHz, 150mΩ DCR,
2A (0805)
Würth 742792040
Optional External Preamplifier
Power Supply (VS)
R6–R9*
The MAX9736A EV kit provides an input pad to accept
an optional 5V external power supply for powering the
MAX9736A preamplifiers when the internal regulator is
disabled. Disable the internal regulator by removing the
shunt from jumper JU3 before connecting an external
power supply between the VS and AGND pads on the
MAX9736A EV kit (see Table 4). The external power
supply for the preamplifiers must be in the 4.5V to 5.5V
range. Refer to the Power Sequencing section in the
MAX9736A IC data sheet before operating with optional
external preamplifier power supply.
330pF 10ꢀ, 50V X7R ceramic capacitors
(0603)
Murata GRM188R71H331K or
TDK C1608X7R1H331K
C13-C16
*3A current-rating ferrite beads are recommended for 4Ω load
drive.
Jumper Selection
Digital Inputs Power Supply (DVDD)
The MAX9736A EV kit operates from a DC power supply
between 8V and 28V. This power-supply range is too high
for the digital input pins on the MAX9736A IC. The EV kit
includes a circuit to regulate the input power supply to 5V
for powering all the logic circuits on the EV kit. Jumper JU1
sets the DVDD voltage (see Table 2 for shunt positions).
Filtered Output
Audio analyzers typically cannot accept pulse-width-
modulated (PWM) signals at their inputs. Therefore, the
MAX9736AEV kit features a pair of lowpass filters at
each of the outputs to ease evaluation. Use the filtering
output posts (FOUTL+/FOUTL- and FOUTR+/FOUTR-)
to connect the filtered PWM outputs to the audio ana-
lyzer. The default lowpass filters at the EV kit outputs
are optimized for a pair of 8Ω speakers.
Table 2. JU1 Jumper Selection (DVDD)
SHUNT
POSITION
DVDD REGULATED
TO (V)
EV KIT DIGITAL
INPUT POWER
1-2*
2-3
5
0
On
Off
Filterless Output
The MAX9736A EV kit’s filterless outputs (L+/L- and
R+/R-) can be connected directly to a pair of speaker
loads without any filtering. Use the L+/L- and R+/R- test
points to connect speakers directly to the MAX9736A
outputs using twisted-pair cable. Remove inductors
L1–L4 for maximum efficiency.
*Default position.
Shutdown Mode (SHDN)
The MAX9736A features a shutdown mode to reduce
the quiescent current. Jumper JU2 controls the shut-
down (SHDN) pin of the MAX9736A IC (see Table 3 for
shunt positions).
Output Filtering Requirements
To ease evaluation, the MAX9736A EV kit is shipped with
inductor-based output filters. However, the MAX9736A can
pass EC EN55022 regulations with only ferrite-bead filters,
especially when speaker-wire lengths are less than 1m.
Table 3. JU2 Jumper Selection (SHDN)
SHUNT
POSITION
SHDN PIN
CONNECTED TO
EV KIT FUNCTION
EV kit enabled
To install the ferrite-bead filters, first remove the large
filter inductors (L1–L4). Next, replace resistors R6–R9
with ferrite beads listed in Table 1 (provided with the EV
kit), and install filter capacitors on the C13–C16 pads.
Installed*
DVDD
Not
installed
PGND
(through resistor R14)
Shutdown mode
*Default position.
_______________________________________________________________________________________
3
MAX9736A Evaluation Kit
Internal Regulator Enable (REGEN)
The MAX9736A provides an option to disable the internal
regulator when an optional external power supply is con-
nected to the VS and AGND pads on the EV kit to power
the MAX9736A preamplifiers. Jumper JU3 controls the
internal regulator enable (REGEN) pin on the MAX9736A
IC (see Table 4 for shunt positions). See the Optional
External Preamplifier Power Supply (VS) section.
Mono Mode (MONO)
The MAX9736A EV kit is preconfigured to stereo mode
from the factory. To change the MAX9736A EV kit to
operate in mono mode, short jumper JU6 with a short-
ing wire, connect the FOUTL- to the FOUTR- with a
short banana-lead cable, connect the FOUTL+ to the
FOUTR+ with a short banana-lead cable. Connect the
audio input source to the LIN RCA jack. In mono mode,
the right input (RIN) becomes an uncommitted inverting
op amp that can be used for filtering. Jumper JU6 con-
trols the mono mode for the MAX9736A IC (see Table 7
for shunt positions).
Mute Function (MUTE)
The MAX9736A features a mute function to mute the
audio output of the EV kit. Jumper JU4 controls the
mute (MUTE) pin of the MAX9736A IC (see Table 5 for
shunt positions).
Evaluating the MAX9736B
The MAX9736A EV kit can also evaluate the
MAX9736B. Remove the MAX9736A IC (U1) and
replace it with the MAX9736B IC. The MAX9736B IC is
pin compatible with the MAX9736A IC. The MAX9736B
Class D amplifier can drive 2 x 6W into a pair of 8Ω
speakers in stereo mode, or 1 x 12W into a 4Ω speaker
in mono mode. Refer to the MAX9736A/MAX9736B IC
data sheet for additional information.
Modulation Scheme (MOD)
The MAX9736A EV kit provides an option to select the
modulation scheme for the MAX9736A output. Jumper
JU5 controls the modulation-scheme pin (MOD) of the
MAX9736A IC (see Table 6 for shunt positions).
Table 4. JU3 Jumper Selection (REGEN)
Table 5. JU4 Jumper Selection (MUTE)
SHUNT
POSITION
REGEN PIN
CONNECTED TO
EV KIT INTERNAL
REGULATOR
SHUNT
POSITION
MUTE PIN
CONNECTED TO
AUDIO OUTPUT
Normal operation
Muted
Installed*
DVDD
Enabled
Installed*
DVDD
Not
installed
PGND
(through resistor R15)
Not
installed
PGND
(through resistor R16)
Disabled
*Default position.
*Default position.
Evluates:/MAX9736B
Table 6. JU5 Jumper Selection (MOD)
SHUNT POSITION
Installed*
MOD PIN CONNECTED TO
DVDD
PGND (through resistor R17)
OUTPUT MODULATION SCHEME
Filterless modulation
Not installed
Classic pulse-width modulation (PWM)
*Default position.
Table 7. JU6 Jumper Selection (MONO)
MONO PIN CONNECTED
SHUNT POSITION
OUTPUT SPEAKER MODE
AUDIO INPUT SOURCE CONNECTED TO
TO
PGND
(through resistor R18)
Not installed*
Stereo mode
Mono mode
LIN and RIN
LIN
Install a shorting wire
*Default position.
DVDD
(RIN is an uncommitted inverting op amp)
4
_______________________________________________________________________________________
MAX9736A Evaluation Kit
Evluates:/MAX9736B
Figure 1. MAX9736A Customer Design Schematic
_______________________________________________________________________________________
5
MAX9736A Evaluation Kit
Evluates:/MAX9736B
Figure 2. MAX9736A EV Kit Schematic
6
_______________________________________________________________________________________
MAX9736A Evaluation Kit
Evluates:/MAX9736B
Figure 3. MAX9736A EV Kit Component Placement Guide—Component Side
_______________________________________________________________________________________
7
MAX9736A Evaluation Kit
Evluates:/MAX9736B
Figure 4. MAX9736A EV Kit PCB Layout—Component Side
8
_______________________________________________________________________________________
MAX9736A Evaluation Kit
Evluates:/MAX9736B
Figure 5. MAX9736A EV Kit PCB Layout—Solder Side
_______________________________________________________________________________________
9
MAX9736A Evaluation Kit
Revision History
REVISION REVISION
PAGES
CHANGED
DESCRIPTION
NUMBER
DATE
0
1
3/08
Initial release
Changed part number for C6 and replaced Figures 1–5
—
9/09
1, 2
Evluates:/MAX9736B
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
10 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2009 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.
相关型号:
MAX9736DETJ/V+
Audio Amplifier, 12W, 1 Channel(s), 1 Func, BICMOS, 5 X 5 MM, 0.75 MM HEIGHT, ROHS COMPLIANT, MO-220WHHD-2, TQFN-32
MAXIM
©2020 ICPDF网 联系我们和版权申明