REF02DSA [MAXIM]
Three Terminal Voltage Reference, 1 Output, 5V, Trim/Adjustable, BIPolar, PDSO8, SOP-8;
| 型号： | REF02DSA |
| 厂家： | 
MAXIM INTEGRATED PRODUCTS |
| 描述： | Three Terminal Voltage Reference, 1 Output, 5V, Trim/Adjustable, BIPolar, PDSO8, SOP-8 光电二极管 输出元件 |
| 文件： | 总9页 (文件大小：99K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
19-0887; Rev 7; 4/07
+5V, +10V Precision
Voltage References
General Description
Features
The REF01/REF02 are industry-standard precision volt-
age references. The stable 10V output of the REF01
can be adjusted over a ±6ꢀ range ꢁith ꢂiniꢂal effect
on teꢂperature stability. The 5V output REF02 can also
be adjusted over a ±6ꢀ range. The 10V REF01 has a
single-supply operation over an input voltage range of
1±V to ±±V, ꢁhile the 5V REF02 has a single-supply
operation over an input voltage range of 7V to ±±V.
Both devices offer a loꢁ-current drain of 1ꢂA. The
REF02 also provides a TEMP pin ꢁhose output voltage
varies linearly ꢁith teꢂperature, ꢂaking this device
suitable for a ꢁide variety of teꢂperature-sensing and
control applications. For neꢁ designs, refer to the
MAX60±5 or MAX614± data sheets.
♦ Pretrimmed to +5V, +10V
♦ Excellent Temperature Stability: 3ppm/°C (typ)
♦ Low Noise: 10µV (REF02)
P-P
♦ Short-Circuit Protected
♦ Linear Temperature Transducer Output (REF02)
Ordering Information
MAX TEMPCO
INITIAL ERROR
(mV)
PKG
CODE
PART
REF01EP
TEMP RANGE
PIN-PACKAGE
(ppm/°C)
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
8.5
8.5
25
25
25
25
65
65
65
65
65
65
±±0
±±0
8 Plastic DIP
8 Plastic DIP
8 Plastic DIP
8 Plastic DIP
8 SO
P8-2
P8-2
P8-2
P8-2
S8-2
S8-2
P8-2
P8-2
S8-2
S8-2
S8-2
S8-2
REF01EP+
REF01HP
±50
REF01HP+
REF01HSA
REF01HSA+
REF01CP
±50
±50
±50
8 SO
±100
±100
±100
±100
±100
±100
8 Plastic DIP
8 Plastic DIP
8 SO
REF01CP+
REF01CSA
REF01CSA+
REF01CESA
REF01CESA+
8 SO
8 SO
8 SO
+Denotes a lead-free package.
Ordering Information continued at end of data sheet.
Applications
Typical Operating Circuit
Analog-to-Digitial Converters
Digitial-to-Analog Converters
Digital Voltꢂeters
+15V
2
V
IN
6
5
V
O
OUTPUT
Voltage Regulators
REF01
REF02
Threshold Detectors
R
P
TRIM
10kΩ
GND
4
REFERENCE WITH TRIMMED OUTPUT.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
+5V, +10V Precision
Voltage References
ABSOLUTE MAXIMUM RATINGS–REF01
Input Voltage
Output Short-Circuit Duration
REF01, E, H.........................................................................40V
REF01C ...............................................................................±0V
Continuous Poꢁer Dissipation
Plastic Dip (P) (derate at 5.6ꢂW/°C above +±6°C) .....500ꢂW
Sꢂall Outline (S) (derate at 5.0ꢂW/°C above +55°C) ..±00ꢂW
(to ground or V ) .......................................................Indefinite
Storage Teꢂperature Range.............................-65°C to +150°C
Operating Teꢂperature Range
IN
REF01E, REF01H, REF01C
(except REF01CESA)...........................................0°C to +70°C
REF01CESA......................................................-40°C to +85°C
Lead Teꢂperature (soldering, 60s) .................................+±00°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—REF01E/REF01H
(V = +15V, T = +25°C, unless otherꢁise noted.)
IN
A
REF01E
TYP
REF01H
TYP
PARAMETER
SYMBOL
CONDITIONS
UNITS
MIN
9.97
±±.0
MAX
MIN
9.95
±±.0
MAX
Output Voltage
V
O
I
= 0
L
10.00
±6.0
20
10.0±
10.00
±6.0
20
10.05
V
Output Adjustꢂent Range
Output Voltage Noise
Line Regulation
∆V
R
= 10kΩ
P
ꢀ
triꢂ
e
0.1Hz to 10Hz (Note 1)
= 1±V to ±±V (Note 2)
±0
±0
µV
P-P
nP-P
V
0.006
0.005
400
0.010
0.008
0.006
0.006
400
0.010
0.010
ꢀ/V
ꢀ/ꢂA
µs
IN
Load Regulation
I = 0 to 10ꢂA (Note 2)
L
Turn-On Settling Tiꢂe
Quiescent Supply Current
t
To ±0.1ꢀ of final value
No load
ON
I
1.0
1.4
1.0
1.4
ꢂA
SY
To specified output
voltage tolerance
Load Current
I
I
10
21
10
21
ꢂA
L
S
To specified output
voltage tolerance
Sink Current
0.±
0.5
±0
0.±
0.5
±0
ꢂA
ꢂA
Short-Circuit Current
I
V = 0V
O
SC
ELECTRICAL CHARACTERISTICS—REF01E/REF01H
(V = +15V, 0°C ≤ T ≤ +70°C for REF01E and REF01H, I = 0ꢂA, unless otherꢁise noted.)
IN
A
L
REF01E
TYP
REF01H
TYP
PARAMETER
SYMBOL
CONDITIONS
UNITS
ꢀ
MIN
MAX
MIN
MAX
Output Voltage Change ꢁith
Teꢂperature
0°C ≤ T ≤ +70°C
A
∆V
0.02
±
0.06
0.07
10.0
0.17
OT
(Note ±)
Output Voltage Teꢂperature
Coefficient
TCV
(Note 4)
8.5
25.0
ppꢂ/°C
O
Change in V Teꢂperature
O
Coefficient ꢁith Output
R
= 10kΩ
0.7
0.7
ppꢂ/ꢀ
P
Adjustꢂent
Line Regulation
0°C ≤ T ≤ +70°C
(Note 2)
A
0.007
0.006
0.012
0.010
0.007
0.007
0.012
0.012
ꢀ/V
(V = 1±V to ±±V)
IN
Load Regulation
0°C ≤ T ≤ +70°C
A
ꢀ/ꢂA
(I = 0 to 8ꢂA)
L
(Note 2)
2
_______________________________________________________________________________________
+5V, +10V Precision
Voltage References
ELECTRICAL CHARACTERISTICS—REF01C
(V = +15V, T = +25°C, I = 0ꢂA, unless otherꢁise noted.)
IN
A
L
REF01C
UNITS
PARAMETER
SYMBOL
CONDITIONS
MIN
9.90
±2.7
TYP
10.00
±6.0
25
MAX
Output Voltage
V
O
I
= 0ꢂA
L
10.10
V
Output Adjustꢂent Range
Output Voltage Noise
Line Regulation
∆V
R
= 10kΩ
P
ꢀ
triꢂ
nP-P
e
0.1Hz to 10Hz (Note 1)
= 1±V to ±0V (Note 2)
±5
µV
P-P
V
0.009
0.006
0.006
400
0.015
0.015
0.015
ꢀ/V
IN
I
I
= 0 to 8ꢂA
= 0 to 4ꢂA
L
L
Load Regulation (Note 2)
ꢀ/ꢂA
Turn-On Settling Tiꢂe
Quiescent Supply Current
Load Current
t
To ±0.1ꢀ of final value
µs
ON
I
No load
1.0
1.6
ꢂA
ꢂA
ꢂA
ꢂA
SY
I
To specified output voltage tolerance
To specified output voltage tolerance
8
21
L
S
Sink Current
I
0.2
0.5
Short-Circuit Current
I
V
= 0V
±0
SC
O
ELECTRICAL CHARACTERISTICS—REF01C
(V = +15V, T = T
to T , unless otherꢁise noted.)
MAX
IN
A
MIN
REF01C
TYP
PARAMETER
SYMBOL
CONDITIONS
UNITS
ꢀ
MIN
MAX
Output Voltage Change ꢁith
Teꢂperature
∆V
(Note ±)
(Note 4)
0.14
20
0.45
OT
Output Voltage Teꢂperature
Coefficient
TCV
65
ppꢂ/°C
ppꢂ/ꢀ
O
Change in V Teꢂperature
O
R
= 10kΩ
0.7
P
Coefficient ꢁith Output Adjustꢂent
Line Regulation
Load Regulation
V
= 1±V to ±0V (Note 2)
0.011
0.008
0.018
0.018
ꢀ/V
IN
I
= 0 to 5ꢂA (Note 2)
ꢀ/ꢂA
L
Note 1: Guaranteed by design.
Note 2: Line and load regulation specifications include the effect of self heating. 100ꢀ production tested at T = +25°C and guaranteed
A
by design for T = T
to T , as specified.
MAX
A
MIN
Note 3: ∆V is defined as the absolute difference betꢁeen the ꢂaxiꢂuꢂ output voltage and the ꢂiniꢂuꢂ output voltage over the
OT
specified teꢂperature range expressed as a percentage of 10V. Guaranteed by design.
V
-V
⎡
⎤
MAX MIN
10V
∆V
=
× 100
OT
⎢
⎥
⎣
⎦
Note 4: TCV is defined as ∆V divided by the teꢂperature range. Guaranteed by design.
O
OT
binary applications (see the Typical Operating Circuit).
Output Adjustment
The REF01 triꢂ terꢂinal can be used to adjust the volt-
age over a 10V ±600ꢂV range. This feature alloꢁs the
systeꢂ designer to triꢂ systeꢂ errors by setting the ref-
erence to a voltage other than 10V, including 10.240V for
Adjustꢂent of the output does not significantly affect the
teꢂperature perforꢂance of the device. The teꢂpera-
ture coefficient change is approxiꢂately 0.7ppꢂ/°C for
100ꢂV of output adjustꢂent.
_______________________________________________________________________________________
3
+5V, +10V Precision
Voltage References
ABSOLUTE MAXIMUM RATINGS–REF02
Input Voltage
Operating Teꢂperature Range
REF02, E, H.........................................................................40V
REF02C ...............................................................................±0V
Continuous Poꢁer Dissipation
Plastic Dip (P) (derate at 5.6ꢂW/°C above +±6°C) .....500ꢂW
Sꢂall Outline (S) (derate at 5.0ꢂW/°C above +55°C) ..±00ꢂW
Storage Teꢂperature Range.............................-65°C to +150°C
REF02E, REF02H.................................................0°C to +70°C
REF02C (except REF02CESA) ............................0°C to +70°C
REF02CESA......................................................-40°C to +85°C
Output Short-Circuit Duration
(to ground or V ) .......................................................Indefinite
IN
Lead Teꢂperature (soldering, 60s) .................................+±00°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—REF02E/REF02H
(V = +15V, T = +25°C, unless otherꢁise noted.)
IN
A
REF02E
TYP
5.000
±6
REF02H
TYP
5.000
±6
PARAMETER
SYMBOL
CONDITIONS
UNITS
MIN
4.985
±±
MAX
MIN
4.975
±±
MAX
Output Voltage
V
O
I
= 0
L
5.015
5.025
V
Output Adjustꢂent Range
Output Voltage Noise
Line Regulation
∆V
R
= 10kΩ
P
ꢀ
triꢂ
nP-P
e
0.1Hz to 10Hz (Note 5)
= 8V to ±±V (Note 6)
10
15
10
15
µV
P-P
V
0.006
0.005
2±0
0.010
0.010
0.006
0.006
2±0
0.010
0.010
ꢀ/V
IN
Load Regulation
I
= 0 to 10ꢂA (Note 6)
ꢀ/ꢂA
µs
L
Turn-On Settling Tiꢂe
Quiescent Supply Current
Load Current
t
To ±0.1ꢀ of final value
ON
I
No load
1.0
1.4
1.0
1.4
ꢂA
ꢂA
ꢂA
ꢂA
ꢂV
SY
I
To specified output voltage tolerance
To specified output voltage tolerance
10
21
10
21
L
S
Sink Current
I
0.±
0.5
0.±
0.5
Short-Circuit Current
Teꢂperature Voltage Output
I
V
= 0V
±0
±0
SC
O
V
T
(Note 7)
6±0
6±0
ELECTRICAL CHARACTERISTICS—REF02E/REF02H
(V = +15V, 0°C ≤ T ≤ +70°C for REF02E and REF02H, I = 0ꢂA, unless otherꢁise noted.)
IN
A
L
REF02E
TYP
REF02H
TYP
PARAMETER
SYMBOL
CONDITIONS
UNITS
ꢀ
MIN
MAX
MIN
MAX
Output Voltage Change ꢁith
Teꢂperature
0°C ≤ T ≤ +70°C
A
∆V
0.02
±
0.06
0.07
10
0.17
OT
(Note 8)
Output Voltage Teꢂperature
Coefficient
TCV
(Note 9)
8.5
25
ppꢂ/°C
O
Change in V Teꢂperature
O
R
= 10kΩ
0.7
0.7
ppꢂ/ꢀ
Coefficient ꢁith Output
Adjustꢂent
P
Line Regulation
0°C ≤ T ≤ +70°C
(Note 6)
A
0.007
0.006
0.012
0.010
0.007
0.007
0.012
0.012
ꢀ/V
(V = 8V to ±±V)
IN
Load Regulation
0°C ≤ T ≤ +70°C
A
ꢀ/ꢂA
(I = 0 to 8ꢂA)
L
(Note 6)
4
_______________________________________________________________________________________
+5V, +10V Precision
Voltage References
ELECTRICAL CHARACTERISTICS—REF02E/REF02H (continued)
(V = +15V, 0°C ≤ T ≤ +70°C for REF02E and REF02H, I = 0ꢂA, unless otherꢁise noted.)
IN
A
L
REF02E
TYP
REF02H
TYP
PARAMETER
SYMBOL
CONDITIONS
UNITS
MIN
MAX
MIN
MAX
Teꢂperature Voltage Output
Teꢂperature Coefficient
TCV
(Note 7)
2.1
2.1
ꢂV/°C
T
ELECTRICAL CHARACTERISTICS—REF02C
(V = +15V, T = +25°C, unless otherꢁise noted.)
IN
A
REF02C
TYP
PARAMETER
SYMBOL
CONDITIONS
UNITS
MIN
4.950
±2.7
MAX
Output Voltage
V
O
I
= 0ꢂA
L
5.000
5.050
V
Output Adjustꢂent Range
Output Voltage Noise
Line Regulation
∆V
R
= 10kΩ
P
±6.0
12
ꢀ
triꢂ
e
0.1Hz to 10Hz (Note 5)
= 8V to ±0V (Note 6)
18
µV
nP-P
P-P
V
0.009
0.006
0.015
0.015
ꢀ/V
IN
I
I
= 0 to 8ꢂA
= 0 to 4ꢂA
L
L
Load Regulation (Note 6)
ꢀ/ꢂA
Turn-On Settling Tiꢂe
Quiescent Supply Current
Load Current
t
To ±0.1ꢀ of final value
2±0
1.0
21
µs
ON
I
No load
1.6
ꢂA
ꢂA
ꢂA
ꢂA
ꢂV
SY
I
To specified output voltage tolerance
To specified output voltage tolerance
8
L
S
Sink Current
I
0.2
0.5
±0
Short-Circuit Current
Teꢂperature Voltage Output
I
V
O
= 0V
SC
V
T
(Note 7)
6±0
ELECTRICAL CHARACTERISTICS—REF02C
(V = +15V, T = T
to T
, I = 0ꢂA, unless otherꢁise noted.)
L
IN
A
MIN
MAX
REF02C
TYP
PARAMETER
SYMBOL
CONDITIONS
UNITS
ꢀ
MIN
MAX
Output Voltage Change ꢁith
Teꢂperature
∆V
(Note 8)
(Note 9)
0.14
20
0.45
OT
Output Voltage Teꢂperature
Coefficient
TCV
65
ppꢂ/°C
O
Change in V Teꢂperature
O
Coefficient ꢁith Output
R
= 10kΩ
0.7
ppꢂ/ꢀ
P
Adjustꢂent
Line Regulation
Load Regulation
V
= 8V to ±0V (Note 6)
0.011
0.008
0.018
0.018
ꢀ/V
IN
I
= 0 to 5ꢂA (Note 6)
ꢀ/ꢂA
L
Teꢂperature Voltage Output
Teꢂperature Coefficient
TCV
(Note 7)
2.1
ꢂV/°C
T
_______________________________________________________________________________________
5
+5V, +10V Precision
Voltage References
ELECTRICAL CHARACTERISTICS–REF02 (continued)
(V = +15V, T = T
to T
, I = 0ꢂA, unless otherꢁise noted.)
MAX L
IN
A
MIN
Note 5: Guaranteed by design.
Note 6: Line and load regulation specifications include the effect of self heating. 100ꢀ production tested at T = +25°C and guaranteed
A
by design for T = T
to T , as specified.
MAX
A
MIN
Note 7: Liꢂit current in or out of pin ± to 50nA and capacitance on pin ± to ±0pF.
Note 8: ∆V is defined as the absolute difference betꢁeen the ꢂaxiꢂuꢂ output voltage and the ꢂiniꢂuꢂ output voltage over the
OT
specified teꢂperature range expressed as a percentage of 5V. Guaranteed by design.
V
-V
⎡
⎤
MAX MIN
5V
∆V
=
× 100
OT
⎢
⎣
⎥
⎦
Note 9: TCV is defined as ∆V divided by the teꢂperature range. Guaranteed by design.
O
OT
Output Adjustment
880
830
780
730
680
630
580
530
480
430
The REF02 triꢂ terꢂinal can be used to adjust the out-
put voltage over a 5V ±±00ꢂV range. This feature
alloꢁs the systeꢂ designer to triꢂ systeꢂ errors by set-
ting the reference to a voltage other than 5V (refer to
the Typical Operating Circuit).
Adjustꢂent of the output does not significantly affect
the teꢂperature perforꢂance of the device. Typically,
the teꢂperature coefficient change is 0.7ppꢂ/°C for
100ꢂV of output adjustꢂent.
Temperature Voltage Output
-60 -40 -20
0
20 40 60 80 100 120 140
The REF02 provides a teꢂperature-dependent output
voltage on the TEMP pin. This voltage is proportional to
the absolute teꢂperature, and has a scale factor of
approxiꢂately 2.1ꢂV/°C (Figure 1).
TEMPERATURE (°C)
Figure 1. REF02 Temperature/Voltage Output vs. Temperature
Output Voltage = 2.1(T + 27±)ꢂV
ꢁhere T = Teꢂperature in °C.
6
_______________________________________________________________________________________
+5V, +10V Precision
Voltage References
Typical Operating Characteristics
(T = +25°C, unless otherꢁise noted.)
A
REF02 OUTPUT WIDEBAND
NOISE vs. BANDWIDTH
(0.1Hz TO FREQUENCY INDICATED)
REF01 OUTPUT WIDEBAND
NOISE vs. BANDWIDTH
(0.1Hz TO FREQUENCY INDICATED)
LINE REGULATION
vs. FREQUENCY
76
10,000
1000
10,000
1000
V
= 15V
V
= 15V
IN
IN
V
= 15V
IN
T
= +25°C
T
= +25°C
A
A
T
= +25°C
66
56
46
36
26
16
6
A
100
10
100
10
10
100
1k
10k
100k
1M
10
100
1k
10k
100k
1M
10
100
1k
10k
100k
1M
FREQUENCY (Hz)
FREQUENCY (Hz)
FREQUENCY (Hz)
NORMALIZED LOAD
NORMALIZED LINE REGULATION
vs. TEMPERATURE
MAXIMUM LOAD CURRENT
vs. INPUT VOLTAGE
REGULATION (∆I = 10mA)
L
vs. TEMPERATURE
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
35
30
25
20
15
10
5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
V
= 15V
IN
SHORT-CIRCUIT
PROTECTION
500mW MAXIMUM
DISSIPATION
T
= +25°C
A
0
-60 -40 -20
0
20 40 60 80 100 120 140
10
15
20
25
30
-60 -40 -20
0
20 40 60 80 100 120 140
TEMPERATURE (°C)
INPUT VOLTAGE (V)
TEMPERATURE (°C)
OUTPUT CHANGE DUE TO
THERMAL SHOCK
MAXIMUM LOAD CURRENT
vs. TEMPERATURE
QUIESCENT CURRENT
vs. TEMPERATURE
0.035
0.030
0.025
0.020
0.015
0.010
0.005
0
30
25
20
15
10
5
1.3
1.2
1.1
1.0
0.9
0.8
0.7
V
= 15V
IN
V
= 15V
V
= 15V
IN
IN
T
=
T =
A
+25°C +75°C
A
DEVICE IMMERSED
IN +75°C OIL BATH
0
-10
0
10
20
30
40
50
60
-60 -40 -20
0
20 40 60 80 100 120 140
-60 -40 -20
0
20 40 60 80 100 120 140
TIME (s)
TEMPERATURE (°C)
TEMPERATURE (°C)
_______________________________________________________________________________________
7
+5V, +10V Precision
Voltage References
Typical Applications
+15V
1.1mA
2
2
6
+10V
V
IN
V
IN
V
O
6
5
V
O
+
10kΩ
10kΩ
REF01
9V
9V
5
REF01
TRIM
GND
4
+15V
100kΩ
10.000V
TRIM
-10V
5kΩ
OP-07
GND
4
-15V
-
Figure 2. Precision Calibration Standard
Figure 3. 10V Reference
+15V
2
+15V
2
9.09kΩ
V
REF
6
5
V
IN
V
O
V
IN
6
5
5.11kΩ
V
O
REF02
TRIM
2
50kΩ
1.5kΩ
7
6
OP-07
1.5kΩ
5%
V
REF02
OUT
4
5.0V
R
3
I
=
+ 1mA
(10mV/°C)
3
OUT
R
TEMP
TRIM
*
GND
4
GND
4
200kΩ
I
OUT
-15V
*UP TO 10 FEET OF SHIELDED
4-CONDUCTOR CABLE.
Figure 4. Current Source
Figure 5. Precision Temperature Transducer with
Remote Sensor
8
_______________________________________________________________________________________
+5V, +10V Precision
Voltage References
Pin Configurations
TOP VIEW
N.C.
1
2
3
4
8
7
6
5
N.C.
N.C.
N.C.
1
2
3
4
8
7
6
5
N.C.
N.C.
V
IN
V
IN
REF01/
REF02
REF01/
REF02
N.C./TEMP*
GND
V
OUT
N.C./TEMP*
GDN
V
OUT
TRIM
TRIM
DIP
SO
*NOTE: PIN ± IS N.C. (NO CONNECTION) ON REF01, TEMP OUTPUT ON REF02.
Ordering Information (continued)
MAX TEMPCO
(ppm/°C)
INITIAL ERROR
(mV)
PKG
CODE
PART
REF02EP
TEMP RANGE
PIN-PACKAGE
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
8.5
8.5
25
25
25
25
65
65
65
65
65
65
±15
±15
±25
±25
±25
±25
±50
±50
±50
±50
±50
±50
8 Plastic DIP
8 Plastic DIP
8 Plastic DIP
8 Plastic DIP
8 SO
P8-2
P8-2
P8-2
P8-2
S8-2
S8-2
P8-2
P8-2
S8-2
S8-2
S8-2
S8-2
REF02EP+
REF02HP
REF02HP+
REF02HSA
REF02HSA+
REF02CP
8 SO
8 Plastic DIP
8 Plastic DIP
8 SO
REF02CP+
REF02CSA
REF02CSA+
REF02CESA
REF02CESA+
8 SO
8 SO
8 SO
+Denotes a lead-free package.
Revision History
Pages changed at Rev 7: 1, 9
Package Information
For the latest package outline inforꢂation, go to
www.maxim-ic.com/packages.
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 _____________________ 9
© 2007 Maxiꢂ Integrated Products
is a registered tradeꢂark of Maxiꢂ Integrated Products, Inc.
相关型号：
REF02DSA+T
Three Terminal Voltage Reference, 1 Output, 5V, Trim/Adjustable, BIPolar, PDSO8, SO-8
MAXIM
REF02DSA-T
Three Terminal Voltage Reference, 1 Output, 5V, Trim/Adjustable, BIPolar, PDSO8, SOP-8
MAXIM
REF02EH#PBF
IC 1-OUTPUT THREE TERM VOLTAGE REFERENCE, 5 V, MBCY8, LEAD FREE, METAL CAN, TO-5, 8 PIN, Voltage Reference
Linear
©2020 ICPDF网 联系我们和版权申明