CS800/L2S [MAXWELL]
Logic IC Output Optocoupler;
| 型号： | CS800/L2S |
| 厂家： | 
MAXWELL TECHNOLOGIES |
| 描述： | Logic IC Output Optocoupler 输出元件 光电 |
| 文件： | 总12页 (文件大小：521K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
®
ISOCOM LTD
IECQ
QC 88000-C002
COMPONENT
SPECIFICATION
ISSUE 5
May 2013
Component Specification
For
Ceramic Hermetically Sealed
High Speed Optocouplers
M1077 IECQ
IECQ Product Certificate Number E1280/F
Up-to-date lists and bibliographical references of IECQ publications may be downloaded from www.iecq.org
Further copies of this document may be obtained from:
IEC
International Electrotechnical Commission
Commission Electrotechnique Internationale
Box 131, rue de Varembé, CH 1211 Geneva 20, Switzerland
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 1 of 12
QC 88000-C002: 2013
®
ISOCOM LTD
FOREWORD
The IECQ Quality Assessment System for Electronic Components (IECQ) is composed of those member countries of
the International Electrotechnical Commission (IEC) who wish to take part in a harmonized system for electronic
components of assessed quality. IECQ is also known in some European member countries as IECQ-CECC.
The object of the System is to facilitate international trade by the harmonization of the specifications and quality
assessment procedures for electronic components, and by the grant of an internationally recognised Mark, or
Certificate of Conformity. The components produced or services provided under the system are thereby acceptable in
all member countries without further testing.
This Component Specification is based upon the requirements of IECQ 03-3, Annex E (QC 001002-2 Amendment 1,
Clause 5.4) and has been prepared by:
Isocom Ltd
48 Hutton Close
Crowther Industrial Estate
Washington
Tyne and Wear
NE38 0AH
United Kingdom
Tel:
Fax:
+44 0191 4166 546
+44 0191 4155 055
and published under the authority of:
BSI Group
Kitemark Court
Davy Avenue
Knowlhill
Milton Keynes
MK5 8PP
United Kingdom
AMENDMENT RECORD
Issue 1 – Changed Page 4 – Amendments 06/07/09
Issue 2 – Changed Pages 3, 4, 5 & 6 – RoHS Compliant & Amendments – 13/07/10
Issue 3 – Changed Page 6 – Added 4/5 pin hybrid outline drawing – 26/5/11
Issue 4 – Changed Page 4, text changed on selection guide, change to drawing for CSM168-2,
changed Page 5 changed description of 16 pin DIP, changed text on document footer 30/5/13
REQUIREMENTS
The requirements for IECQ Component Specifications as detailed in IECQ 03-3, Annex E (QC 001002-2 Amendment
1, Clause 5.4) are satisfied by the following data sheet.
It should note that IECQ are not responsible for manufacturers declarations made in data sheets which fall outside the
limits of approved detailed in IECQ certificates.
This Component Specification is intended for use with applicable IECQ Assessment Specifications. Eg: QC 88000-
A0001
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 2 of 12
QC 88000-C002: 2013
®
ISOCOM LTD
Ceramic Hermetically Sealed, Radiation Hard
High Speed Optocoupler
■ 4N55
■ CD850
■ CH380
■ CS800/801
■ CSM168-2
■ CSM168-4
■ CSM1800
■ CSM1801
■ MC800
Features
Applications
▪ Release to IECQ
▪ Military, high reliability system
▪ Hermetically Sealed
▪ Medical instruments
▪ Mos, Cmos Applications
▪ Logic Interfacing
▪ High Density Packaging
▪ 1500V DC withstand Test Voltage
▪ Low Input Requirements
▪ High Current Transfer Ratio
▪ RoHS Compliant
▪ Data Transmission
▪ Power Supply
Description
These devices are single, dual and quad, hermetically sealed optocouplers. Each channel is
composed of an infra-red light emitting diode and a photon detector high speed transistor output.
Package styles for these devices include 6 pin, 8 pin, 16 pin flat pack, 6 pin LCC and hybrid 6 pin,
with surface mount, butt cut and gull wing options available. Separate connections for the
photodiodes and output transistor collectors improve the speed up to a hundred times that of a
conventional phototransistor optocoupler by reducing the base-collector capacitance.
The same electrical die, assembly processes and materials are used for each channel of each
device shown below. Therefore absolute maximum ratings, recommended operating conditions,
electrical specifications and performance characteristics are identical for all units. Any exceptions,
due to packaging variations and limitations, are as noted.
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 3 of 12
QC 88000-C002: 2013
®
ISOCOM LTD
Selection Guide Package Styles and Configuration Options
6pin
metal Can
TO-5
5 pin
Hybrid
16 pin
Flat Pack
Package
Lead Style
6 Pad LCC
8 pin DIP
16 pin DIP
1
Channels
1
1
1/2
2
2/4
Common Channel Wiring
Isocom Part Numbers and Options
CD850
CS800/801
Commercial
MC800
CH380
CSM1800/01
4N55
CSM168
CD850/L2
Defense Level
MC800/L2
CH380/L2
CSM1800/01/L2
CS800/801/L2
CD850/L2S
CS800/801/L2S
4N55/L2
CSM168/L2
Space Level
MC800/L2S
Gold Plate
CH380/L2S
Gold Plate
CSM1800/01/L2S
Gold Plate
4N55/L2S
Gold Plate
Option 20
Option 10
Option 30
Option 60
CSM168/L2S
Gold Plate
Standard Gold Plate Finish
Solder Dipped
Gold Plate
Option 20
Option 10
Option 30
Option 60
Butt Cut/Gold Plate
Gull Wing/Soldered
Crew Cut/Gold Plate
Functional Diagrams
MC800
6 pin TO-5
1 Channel
CH380
5 pin Hybrid
1 Channel
CSM1800/01
CD850
8 pin DIP
2 Channel
4N55
16 pin DIP
2 Channel
CSM168-2
16 pin Flat Pack
2 Channel
6 pad LCC
1 Channel
3
5
7
2
1
CS800/801
8 pin DIP
1 Channel
CSM168-4
16 pin Flat Pack
4 Channel
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 4 of 12
QC 88000-C002: 2013
®
ISOCOM LTD
Outline Drawings
16 pin DIP
16 pin Flat Pack, 2 and 4 Channel
NOTE: DIMENSIONS IN
MILLIMETERS
6 pin TO-5, 1 Channel
6 LEADS
0.0175 (0.445)
0.040(1.02)
0.32 (8.13)
5
0.037 (0.935)
6
3
7
2
1
0.022 (5.08)
0.5 (12.70)
0.031 (0.787)
0.17 (4.32)
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 5 of 12
QC 88000-C002: 2013
®
ISOCOM LTD
8 pin DIP 1 and 2 Channel
6 Terminal LCC Surface Mount, 1 Channel
1.651
2.286
6.223
5
4
3
6
1
2
0.635
1.27
2.54
1.67
4.318
CSM1800
0.762
R = .2286
0.635
4/5 Terminal Hybrid, 1 Channel
3.5
0.6
4.5
0.13
0.13
+0.2
+0.2
2.0
0.7
0.6
0.6
Device Marking
Isocom Part Number
Manufacturer
XXXXXXX
ISOCOM
XXXX
Date Code (XX year XX week)
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 6 of 12
QC 88000-C002: 2013
®
ISOCOM LTD
Hermetic Optocoupler Options
Option Description
10
Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is
available on commercial hi-rel product in 8 and 16 pin DIP
20
30
Surface mountable hermetic optocoupler with leads cut and bent for gull wing assembly. This option is
available on commercial and hi-rel product in 8 and 16 pin DIP.
60
Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is
available on commercial hi-rel product in 8 and 16 pin DIP
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 7 of 12
QC 88000-C002: 2013
®
ISOCOM LTD
Absolute Maximum Ratings
Storage Temperature
Operating Temperature
-65°C to +150°C
-55°C to +125°C
Input Diode
Peak Forward Current
Average Forward Current
Reverse Voltage
40mA
20mA
5V
1 mS duration
Power Dissipation
36mW
Derate linearly above 100°C at 1.4W/°C for CH380 and
CS800/801
Output Detector
Supply Voltage
Average Current
Peak Current
-0.5 to 20V
8mA
16mA
VCC
IO
IO
Voltage
Power Dissipation
-0.5 to 20V
40mW
VO
For CH380 and CS800/801
50mW
Derate linearly above 100°C at 1.4W/°C for CD850,
CSM6530 and 4N55
Emitter-Base Reverse Voltage
Base Current
3V
5mA
BVEBO
IB
Single Channel Schematic
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 8 of 12
QC 88000-C002: 2013
®
ISOCOM LTD
Electrical Characteristics
TA = -55°C to +125°C U.O.S.
All typical values at VCC = 5V, TA = 25°C (each channel where appropriate).
Parameter
Symbol Test Conditions
hf(CTR) VCC = 4.5V, VO = 0.4V,IF = 16mA,
Device
Min
Type Max
Units
%
Current Transfer Ratio
(See notes 1 & 2)
9
15
9
-
20
-
-
CS801
CD850
VCC = 4.5V, VO = 0.5V, IF = 16mA
17
0.3
0.3
30
-
Logic Low Output Voltage VOL
VCC = 4.5V, IF = 16mA
IO = 1.44mA
0.4
0.5
250
V
CD850
-
Logic High Output
Current (See note 1)
IOH
IF1 = 0, IF2 = 20mA
VO = VCC = 18V
-
µA
CD850
IF1
= F2 = 20mA, VO = VCC = 15
CSM1800
Logic Low Supply Current ICCL
(See note 1)
VCC = 18V, IF1 = IF2 = 20Ma
VCC = 18V, IF1 = 20Ma
VCC = 15V IF1 = 16Ma IF2 =0
-
30
200
µA
CS800/1
CH380
CSM1800
VCC = 16VF1 = IF2 =16mA
Vcc = 18V, IF = 0mA, IF (other
channel) = 20mA
CD850
400
10
Logic
High
Supply ICCH
-
0.4
µA
V
Current (See note 1)
Input Forward Voltage
(See note 1)
Input Reverse Breakdown VBR
(See note 1)
VF
IF = 20mA
-
1.45
1.9
-
IR = 10µA
3
-
-
-
V
Input-Output Insulation
Leakage Current
IIO
RH = 45%, TA = 25°C, t = 5S
VIO = 1500VDC
1.0
µA
(See notes 3 & 9)
RH = 45%, TA = 25°C, t = 5S
VIO = 500VDC
CH380
Propagation Delay Time tPHL
to Logic Low at Output
(See note 1)
RL = 8.2KΩ, IF = 16mA, VCC = 5V
CL = 50pF
-
-
0.4
2.0
2.0
µS
µS
RL = 1.9K, IF = 16mA, VCC = 5V
CD850
CSM1800
2.0
6.0
Propagation Delay Time tPLH
to Logic High at Output
(See note 1)
RL = 8.2KΩ, IF = 16mA, VCC = 5V
CL = 50pF
RL = 1.9K, IF = 16mA, VCC = 5V
CD850
6.0
CSM1800
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 9 of 12
QC 88000-C002: 2013
®
ISOCOM LTD
Typical Characteristics
TA = 25°C
Parameter
Symbol Test Conditions
Notes Min
Type
Max
Units
Temperature Coefficient of
Forward Voltage
IF = 20mA
1
-
-1.9
-
mV/°C
VF
TA
CIN
RI-O
CI-O
II-I
Input Capacitance
f = 1mhz, VF = 0
V1-0 = 500Vdc
f = 1MHz
45% Relative Humidity
VH = 500Vdc, t = 5S
f = 1MHz
VO = 5V, IO = 3mA
VCC = 5V, VO = 2V
1
1
-
-
-
-
125
1012
1.0
1
-
-
-
-
pF
Ω
pF
pA
Resistance (Input-Output)
Capacitance (Input-Output)
Input-Input Insulation
Leakage Current
Capacitance (Input-Input)
Transistor DC Current Gain
Small Signal Current
Transfer Ratio
1 & 4
5
CI-I
hFE
IO
IF
5
1
1
-
-
-
0.6
130
20
-
-
-
pF
-
%
Common Mode Transient
Immunity at Logic Low Level
Output
Common Mode Transient CMH
Immunity at Logic High Level
Output
CML
IF = 16mA,RL = 8.2KΩ
1 & 7
1 & 6
8
-
-
-
-1000
1000
2
-
-
-
V/µS
V/µS
MHz
VCM = 10VP-P
VO (max) = 0.8V
IF = 0mA,RL = 8.2KΩ
VCM = 10VP-P
VO (max) = 2.0V
RL = 100Ω
Bandwidth
BW
Notes (Apply typically to 16 pin package)
1. Each channel, where appropriate.
2. Current Transfer ratio is defined as the ratio of output collector current, IO, to the forward LED input current, IF, times
100%. CTR is known to degrade slightly over the unit’s lifetime as a function of input current, temperature, signal duty
cycle and system on time. It is recommended that designers allow at least 20-25% guard band for CTR degradation.
3. Measured between pins 1 through 8 shorted together, and pins 9 through 16 shorted together.
4. Measured between each input pair shorted together, and the output pins for that channel shorted together.
5. Measured between pins 3 and 4 shorted together, and pins 7 and 8 shorted together.
6. CMH is the steepest slope (dV/dt) on the leading edge of the common mode pulse, VCM, for which the output will
remain in the logic high state (i.e., VO > 2.0V).
7. CML is the steepest slope (dV/dt) on the trailing edge of the common mode pulse, VCM, for which the output will
remain in the logic low state (i.e., VO < 0.8V).
8. Bandwidth is the frequency at which the AC output voltage is 3dB below the low frequency asymptote.
9. This is a momentary withstand test, not an operating condition.
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 10 of 12
QC 88000-C002: 2013
®
ISOCOM LTD
Electrical Characteristics
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 11 of 12
QC 88000-C002: 2013
®
ISOCOM LTD
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 12 of 12
QC 88000-C002: 2013
相关型号：
©2020 ICPDF网 联系我们和版权申明