CSM1800 [MAXWELL]
Logic IC Output Optocoupler,;
| 型号： | CSM1800 |
| 厂家： | 
MAXWELL TECHNOLOGIES |
| 描述： | Logic IC Output Optocoupler, 输出元件 光电 |
| 文件： | 总11页 (文件大小：1128K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
®
ISOCOM LTD
PART NUMBER
COMPONENT
CSM1800/1801/L2S
ISSUE 1
SPECIFICATION
September 2013
Component Specification
For Ceramic Hermetically Sealed, Radiation Hard
High Speed Optocoupler
M1077 IECQ
Further copies of this document may be obtained from:
ISOCOM LIMITED
WASHINGTON, UK
NE38 0AH
www.isocom.uk.com
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 1 of 10
®
ISOCOM LTD
Ceramic Hermetically Sealed, Radiation Hard
High Speed Optocoupler
■ CSM1800/1801
■ CSM1800/1801/L2
■ CSM1800/1801/L2S
Features
Applications
▪ Released to European Standard
and Complies to Mil Std
▪ Space Radiation Equipment
▪ Military, high reliability system
▪ Medical instruments
▪ Mos, Cmos Applications
▪ Logic Interfacing
▪ Total Ionizing Dose Tested to 1MRad(si)
▪ Displacement Damage Tested to 3 MEV x10¹²
▪ Hermetically Sealed
▪ High Isolation Voltage
▪ Data Transmission
▪ Power Supply
▪ 6 Pin LCC Package
▪ Low Input Requirements
▪ Modems
▪ High Speed; Typically 2Mhz
Description
These devices are single, hermetically sealed optically coupled isolators. Each channel is composed of a Gallium
Arsenide infra-red emitting diode and a silicon phototransistor. The CSM1800 series are being used in environments
encounted by space applications. It is manufactured to meet the JANS standard in conjunction with MIL-PRF-19500
procedures (please see next page for all other applicable specifications). Package styles for this device include 6 Pin
LCC Package with surface mount, solder dip option available. These packages have a shield effect to cut off ambient light
as they are designed for high density mounting applications.
Therefore absolute maximum ratings, recommended operating conditions, electrical specifications and performance
characteristics are identical for all units. Any exceptions, due to packaging variations and limitations, are as noted.
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 2 of 10
®
ISOCOM LTD
Standards
The following specifications have been included in the manufacturing of this product:
Military Compliance Specifications
MIL-PRF-19500 – General Specification for Discrete Semiconductor Devices
IECQ – M1077
Military Compliance Standards
MIL-STD-202 – Test Method Standard Electronic and Electrical Component Parts
MIL-STD-883 – Test Method Standard Microcircuits
MIL-STD-750 – Test Methods for Semiconductor Devices
ISO 9001:2008 – Manufacturing of Optocouplers and Optoelectronic components.
Single Channel Schematic
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 3 of 10
®
ISOCOM LTD
Selection Guide Package Styles and Configuration Options
Package
6 pin LCC
Lead Style
Channels
1
Common Channel Wiring
Isocom Part Number and Options
Commercial
CSM1800/1801
CSM1800/1801/L2
CSM1800/1801/L2S
Gold Plate
Defense Screen Level
Space Screen Level
Standard Gold Plate Finish
Solder Dipped
Option 20
Functional Diagrams
CSM1800/1801
6 pin LCC
1 Channel
Device Marking
ISOCOM
XXXXXXX
XXXX
Manufacturer
Isocom Part Number
Date Code (XX year XX week)
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 4 of 10
®
ISOCOM LTD
Outline Drawings
Absolute Maximum Ratings
TA = 25°C U.O.S.
Storage Temperature
-65°C to +150°C
-55°C to +125°C
Operating Temperature
Lead Soldering Temperature
Input-to-Output Isolation Voltage
260°C 1.6mm from case for 10S
1500VDC
Input Diode
Average Forward Current
Reverse Voltage
20mA
7V
Peak forward Current
Power Dissipation
40mA
36mW
1mS,
Output Transistor
Supply Voltage
Average Current
0.5V to 20V
8mA
Collector Current
Power Dissipation
16mA
50mW
Electrical Characteristics
Input Diode Electrical Characteristics TA = 25°C U.O.S.
Parameter
Symbol
Test Conditions
Min
Type
Max
Units
Current Transfer Ratio
Vcc =4.5V, Vo=0.4V
IF = 16mA, TA =25°C
-
f (CTR)
h
17
-
%
Logic low output voltage
Logic high output current
Logic high supply current
VOL
IoH
ICCH
Vcc =4.5V, IF = 16mA, Io=1.44mA
IF = 0, Vo= Vcc=15V
IF = 0, Vo= OPEN
Vcc=15V
-
-
-
0.3
0.05
0.05
0.4
250
5
V
µA
µA
Logic low supply current
ICCL
Vcc=15V, IF = 16mA
IF = 0
-
60
400
µA
Input forward voltage
Input reverse breakdown
Input-Output Insulation
Leakage Current
Propagation Delay
H-L
VF
VBR
IIO
IF = 16mA
IR = 10µA
RH = 45%, TA = 25°C, t = 5S
VIO = 1500VDC
-
3
1.45
12
1.7
-
1.0
V
V
µA
tPHL
tPLH
-
-
0.3
0.1
0.8
0.8
µS
µS
RL = 1.9KOhms
Vcc = 5V
IF = 16mA
Propagation Delay
L-H
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 5 of 10
®
ISOCOM LTD
Electrical Characteristics
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 6 of 10
®
ISOCOM LTD
GROUP TESTING to MIL-STD 750
GROUP
TEST
MIL-STD-750
READ AND
RECORD
Group A
SG1
Visual inspection & mechanical
dimensions
Method 2071
SG2
SG3
SG4
DC static test at 25°C
DC static test at 125°C and ‐55°C
Dynamic test at 25°C
yes
yes
yes
Group B
SG 1
SG 2
Physical dimensions
Solderability
Method 2066
Method 2026
Resistance to solvents
Thermal Shock
Method 1022
Method 1056 Cond. B,
25 cycles
SG 3
Temperature cycling
Method 1051, 100
cycles, -55/+125°C
Method 1071, Cond. H
(fine), Cond. C (gross)
pre and post
Hermetic seal fine and gross leak
Electrical measurement
Decap internal visual inspection
Bond strength
yes
2075
Method 2037, Cond. D
Method 2017
yes
yes
Die shear
SG 4
SG 5
Intermittent operation life
Method 1037, 1042,
Cond D, Tab.5-5
Method 1071, Cond. H
(fine), Cond. C (gross)
pre and post
Hermetic seal fine and gross leak
Electrical measurement
Bond strength
Acc. steady‐state operation life
yes
yes
Method 2037, Cond. D
Method 1027
Electrical measurement
Bond strength
pre and post
Method 2037, Cond. D
yes
yes
Group C
SG 2
Thermal Shock
Method 1056, Cond. B,
25 shocks
Temperature cycling
Method 1051, Cond. C,
‐55/+125°C , 25 cycles
(total 45 cycles
including screening)
Method 1071, Cond. H
(fine), Cond. C (gross)
Method 1021
pre and post
Method 2016,
Hermetic seal fine and gross leak
Moisture resistance
Electrical measurement
Mechanical shock
yes
yes
SG 3
non‐operating, 1500 G,
0.5 ms, 5 blows in each
orientation (X1,Y1,Z1)
Method 2056
Method 2006, at a peak
level of 5000 G
Vibration
Constant acceleration
Electrical measurement
Steady state operating life Not
required as B5 is available on same
lot
pre and post
SG 6
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 7 of 10
®
ISOCOM LTD
100% SCREENING to MIL-STD 750
TEST
MIL-STD-750
READ AND RECORD?
Internal Visual
Sealing
2072
(Fine Leak)
(Gross Leak)
Temp Cycling
1071, Condition H1
1071, Condition C
1051, Condition
B‐55/+125°C, 20 Cycles.
2006, 5000G, Y1 only.
2052, Condition A
2076
Const. Acceler
PIND
Radiography
Initial Electrical
HTRB
R & R
R & R
125°C, ‐55°C, 25°C
1039
Interim Electrical
Burn-In
25°C only
1039
Final Electrical
PDA
R & R
Calculate & R
125°C, ‐55°C, 25°C
Max. 5%, pre/post B1
electrical and delta at RT
only
(Fine Leak)
(Gross Leak)
1071, Condition H1
1071, Condition C
Solder Dip
Fine Leak
Gross Leak
1071, Condition H1
1071, Condition C
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 8 of 10
®
ISOCOM LTD
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 9 of 10
®
ISOCOM LTD
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 10 of 10
®
ISOCOM LTD
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 11 of 10
相关型号：
©2020 ICPDF网 联系我们和版权申明