KBP3005K [MDD]

SILICON BRIDGE RECTIFIERS;
KBP3005K
型号: KBP3005K
厂家: Chendahang Electronics Co., Ltd    Chendahang Electronics Co., Ltd
描述:

SILICON BRIDGE RECTIFIERS

文件: 总2页 (文件大小:844K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
KBP3005K THRU KBP310K  
SILICON BRIDGE RECTIFIERS  
Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Amperes  
KBP-K  
FEATURES  
0.581(14.75)  
0.561(14.25)  
0.043(1.1)  
0.031(0.8)  
0.144(3.65)  
0.132(3.35)  
Glass passivated die construction  
Low forward voltage drop  
High current capability  
High surge current capability  
Plastic material-UL flammability 94V-O  
0.417(10.6)  
0.402(10.2)  
0.087(2.2)  
0.071(1.8)  
0.056(1.42)  
0.048(1.22)  
0.583(14.8)  
0.563(14.3)  
MECHANICAL DATA  
0.022(0.55)  
0.012(0.3)  
Case: KBP-K Molded plastic body  
Terminals: Plated leads solderable per  
MIL-STD-202, Method 208  
0.16(4.06)  
0.14(3.56)  
0.034(0.86)  
0.03(0.76)  
Polarity: As marked on case  
Mounting Position: Any  
Marking : Type number  
Dimensions in inches and (millimeters)  
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS  
Ratings at 25 C ambient temperature unless otherwise specified.  
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.  
KBP  
3005K  
KBP  
301K 302K  
KBP  
KBP  
KBP  
KBP  
KBP  
SYMBOLS  
UNITS  
MDD Catalog  
Number  
304K 306K 308K 310K  
Maximum repetitive peak reverse voltage  
Maximum RMS voltage  
VRRM  
VRMS  
VDC  
VOLTS  
VOLTS  
VOLTS  
50  
35  
50  
100  
70  
200  
140  
200  
400  
280  
400  
600  
420  
600  
800  
560  
800  
1000  
700  
Maximum DC blocking voltage  
Maximum average forward output rectified current  
at TA=50 C(Note 1)  
100  
1000  
3.0  
I(AV)  
Amps  
Peak forward surge current  
8.3ms single half sine-wave superimposed on  
rated load (JEDEC Method)  
60.0  
Amps  
IFSM  
Forward voltage per element  
@IF=3.0A  
Volts  
VF  
IR  
1.1  
Maximum DC reverse current  
at rated DC blocking voltage  
TA=25 C  
µ
A
5.0  
0.5  
30  
TA=125 C  
mA  
RθJA  
RθJL  
Typical Thermal Resistance per leg(Note 2)  
Operating junction temperature range  
C/W  
C
11  
TJ,  
TSTG  
-55 to +150  
Note:1. Mounted on glass epoxy PC board with 1.3mm2 solder pad.  
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C..  
RATINGS AND CHARACTERISTIC CURVES KBP3005K THRU KBP310K  
Fig. 2 Typical Fwd Characteristics  
Fig. 1 Forward Current Derating Curve  
10  
3.0  
TA= 25°C  
1.0  
2.0  
1.0  
0.1  
0
Pulse Width  
=
300 µs  
0
0
0.2  
0.4  
0.6  
0.8  
1.0  
1.2  
1.4  
0
50  
100  
150  
VF, INSTANTANEOUS FWD VOLTAGE (V)  
T,TEMPERATURE (°C)  
Fig. 4 Typical Junction Capacitance  
Fig. 3 Max Non-Repetitive Peak Fwd Surge Current  
100  
100  
10  
0
TJ = 25°C  
f = 1MHz  
Single Half Sine-Wave  
Pulse Width =8.3ms  
(JEDEC Method)  
60  
50  
40  
30  
0
0
10  
100  
10  
NUMBER OF CYCLES AT 60 Hz  
0
100  
VR, REVERSE VOLTAGE (V)  
The cruve graph is for reference only, can't be the basis for judgment(曲线图仅供参考)!  

相关型号:

KBP3005P

Bridge Rectifier Diode, 1 Phase, 3A, 50V V(RRM), Silicon, PLASTIC, KBP, 4 PIN
MCC

KBP3005_17

SILICON BRIDGE RECTIFIERS
MDD

KBP301

3 Amp Bridge Rectifier 50 to 1000 Volts
MCC

KBP301

SINGLE PHASE 3.0 AMPS. GLASS PASSIVATED BRIDGE RECTIFIERS
YANGJIE

KBP301

SINGLE-PHASE SILICON BRIDGE
CHENG-YI

KBP301

Voltage Range 50 to 1000 Volts Current 3.0 Amperes
PFS

KBP301

GLASS PASSIVATED BRIDGE RECTIFIERS
CTC

KBP301

3.0A Single-Phase GPP Bridge Rectifier
ASEMI

KBP301

Single-phase Silicon Bridge
LGE

KBP301-B

Rectifier Diode,
MCC

KBP301-BP

Bridge Rectifier Diode, 1 Phase, 3A, 100V V(RRM), Silicon, ROHS COMPLIANT, PLASTIC, KBP, 4 PIN
MCC

KBP3010G

GLASS PASSIVATED BRIDGE RECTIFIERS
CTC