MDDCD4S [MDD]
Voltage Range - 200 to 1000 Volts Current - 1.0 Ampere Ideal for printed circuit board; 电压范围 - 200到1000伏特电流 - 1.0安培理想的印刷电路板
| 型号： | MDDCD4S |
| 厂家： | 
Chendahang Electronics Co., Ltd |
| 描述： | Voltage Range - 200 to 1000 Volts Current - 1.0 Ampere Ideal for printed circuit board |
| 文件： | 总3页 (文件大小：382K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CD2S THRU CD10S
SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIERS
Voltage Range - 200 to 1000 Volts Current - 1.0 Ampere
Features:
Bridge Rectifier Datasheet
1A , 200 - 1000V
Glass passivated junction
Ideal for printed circuit board
Thin body, flat lead
These are powerful bridge rectifiers with
enhanced Glass Passivated Junction P-N
chips. They are advanced rectifiers designed,
tested and guaranteed to withstand a specified
level of energy in the forward mode of
operation. All of these rectifiers are designed
for applications such as,switching convertors.
They have the low negative leakage and low
forward voltage drop, which allows these types
to be operated directly from integrated circuits.
High
temperature
soldering
guaranteed: 260 ℃ /10seconds/
0.375”(9.5mm)
Leads solderable per
MIL-STD-202,Method 208
High reliability under 125℃
working environment, with the
limit temperature 150℃
~
CDS
D1
D2
D4
+
D3
~
-
-
+
AC1
AC2
Outline Drawing : Dimensions in inches(millimeters)
Based on MIL-STD-105E LEVEL II , set the acceptable level as below.
Item Critical
Major
Minor
1.00
0.10(Electrical)
0.25(Physical)
AQL(%)
0.01
Signification , Storage and Shipment
1. The signification on the bridge rectifier body can be determined by customer.
It will be 100% followed up as the instruction from customer.
2. The parts will be packed in the boxes, and the quantity in one box can be
offered by customer. The boxes will be delivered by internal express company.
3. Please keep the parts being stored in the environment with humidity lower
than 75%.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load, for capacitive load derate current by 20%.
MDD
CD2S
MDD
CD4S
MDD
CD6S
MDD
CD8S
MDD
CD10S
SYMBOLS
UNITS
MDD Catalog
Number
Maximum repetitive peak reverse voltage
Maximum RMS voltage
VRRM
VRMS
VDC
VOLTS
VOLTS
VOLTS
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
Maximum DC blocking voltage
1000
Maximum average forward rectified current
IF(AV)
IFSM
Amps
1.0
at TA=75
Peak forward surge current,
35
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Amps
Volts
Maximum instantaneous forward voltage drop
per leg at 0.4A
VF
IR
1.0
Maximum DC reverse current
at rated DC blocking voltage
TA=25
TA=75
uA
uA
5.0
50
Typical junction capactiance per leg(Note)
Typical thermal resistance per leg
Operating temperature range
CJ
R JA
TJ
15
pF
/W
30
-55 to +150
-55 to +150
storage temperature range
TSTG
Measured at 1.0MHz and applied reverse voltage of 4.0 volts.
NOTES:
MDD ELECTRONIC
RATINGS AND CHARACTERISTIC CURVES CD2S THRU CD10S
Typical Performance Curves
Tc = 25℃, unless otherwise specified
MDD ELECTRONIC
相关型号：
©2020 ICPDF网 联系我们和版权申明