GS12E09 [MEANWELL]

10 ~ 12WAC-DC Single Output Wall-mounted type; 10 〜 12WAC -DC单输出壁挂式
GS12E09
型号: GS12E09
厂家: MEAN WELL ENTERPRISES CO., LTD.    MEAN WELL ENTERPRISES CO., LTD.
描述:

10 ~ 12WAC-DC Single Output Wall-mounted type
10 〜 12WAC -DC单输出壁挂式

文件: 总2页 (文件大小:117K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
10 ~ 12W AC-DC Single Output Wall-mounted type  
GS12E series  
Features :  
Universal AC input / Full range  
No load power consumption< 0.3W/240VAC  
Pass energy star level IV for full series  
Meet EISA 2007 (Energy Independence and Security Act)  
2 pole EURO plug  
Class power (without earth pin)  
Protections: Short circuit / Overload / Over voltage / Over temperature  
Fully enclosed plastic case  
Approvals: TUV / CB / CE  
Pass LPS for full series  
2 years warranty  
TUV  
Rheinland  
Product Safety  
geprUfre  
Sicherheit  
SPECIFICATION  
ORDER NO.  
GS12E05-P1I  
GS12E07-P1I  
GS12E09-P1I  
GS12E12-P1I  
GS12E15-P1I  
GS12E18-P1I  
GS12E24-P1I  
SAFETY MODEL NO.  
GS12E05  
5V  
GS12E07  
7.5V  
GS12E09  
9V  
GS12E12  
12V  
GS12E15  
15V  
GS12E18  
18V  
GS12E24  
24V  
DC VOLTAGE  
RATED CURRENT  
CURRENT RANGE  
RATED POWER  
2.0A  
1.6A  
1.33A  
0 ~ 1.33A  
12W  
1.0A  
0.8A  
0.67A  
0.5A  
0 ~ 2.0A  
10W  
0 ~ 1.6A  
12W  
0 ~ 1.0A  
12W  
0 ~ 0.8A  
12W  
0 ~ 0.67A  
12.06W  
180mVp-p  
3.0%  
0 ~ 0.5A  
12W  
OUTPUT  
RIPPLE & NOISE (max.) Note.2 75mVp-p  
VOLTAGE TOLERANCE Note.3 5.0%  
90mVp-p  
4.0%  
90mVp-p  
4.0%  
120mVp-p  
3.0%  
150mVp-p  
3.0%  
200mVp-p  
3.0%  
LINE REGULATION  
LOAD REGULATION  
Note.4 1.0%  
Note.5 5.0%  
1.0%  
1.0%  
1.0%  
1.0%  
1.0%  
1.0%  
4.0%  
4.0%  
3.0%  
3.0%  
2.0%  
2.0%  
SETUP, RISE, HOLD UP TIME 500ms, 20ms, 30ms/230VAC  
500ms, 20ms, 10ms/115VAC at full load  
VOLTAGE RANGE  
FREQUENCY RANGE  
EFFICIENCY (Typ.)  
AC CURRENT  
90 ~ 264VAC  
47 ~ 63Hz  
72%  
135 ~ 370VDC  
75%  
76%  
77%  
79%  
80%  
80%  
INPUT  
0.31A / 115VAC  
0.16A / 230VAC  
INRUSH CURRENT (max.)  
COLD START 25A / 115VAC 45A / 230VAC  
LEAKAGE CURRENT (max.) 0.25mA / 240VAC  
>105% rated output power  
OVERLOAD  
Protection type : Hiccup mode, recovers automatically after fault condition is removed  
115% ~ 135%  
PROTECTION OVER VOLTAGE  
Protection type : Clamp by zener diode  
U1 Tj 140 typically (U1) Detect on main control IC  
OVER TEMPERATURE Note.6  
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down  
0 ~ +50 (Refer to output load derating curve)  
20% ~ 90% RH non-condensing  
WORKING TEMP.  
WORKING HUMIDITY  
STORAGE TEMP., HUMIDITY  
TEMP. COEFFICIENT  
VIBRATION  
-20 ~ +85 , 10 ~ 95% RH  
ENVIRONMENT  
0.03% / (0 ~ 40  
)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes  
SAFETY STANDARDS  
WITHSTAND VOLTAGE  
ISOLATION RESISTANCE  
EMI CONDUCTION & RADIATION  
HARMONIC CURRENT  
EMS IMMUNITY  
TUV EN60950 -1 approved  
I/P-O/P:3KVAC  
SAFETY &  
EMC  
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH  
Compliance to FCC part15 class B, EN55022 , EN61204-3 class B  
Compliance to EN61000-3-2,3  
Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61204-3, light industry level, criteria A  
MTBF  
1414.6Khrs min. MIL-HDBK-217F (25  
)
OTHERS  
DIMENSION  
65*47*26.5mm (L*W*H)  
0.15Kg ; 100pcs / 16Kg / CARTON  
PACKING  
Standard type P1I: 2.1 * 5.5 * 9.5mm turning fork type, center positive for stock ; Other type available by customer requested  
Standard type UL1185 6ft (4FT only for 5V output) for stock ; Other type available by customer requested  
PLUG  
CONNECTOR  
CABLE  
1.All parameters are specified at 230VAC input, rated load, 25 70% RH Ambient.  
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.  
3.Tolerance: includes set up tolerance, line regulation, load regulation.  
NOTE  
4.Line regulation is measured from low line to high line at rated load.  
5.Load regulation is measured from 10% to 100% rated load.  
6.The over temperature protection (OTP) is the built-in function of the control IC (U1). The activating level described above is based on the specification  
provided by the IC manufacturer.  
File Name:GS12E-SPEC 2008-05-06  
10 ~ 12W AC-DC Single Output Wall-mounted type  
GS12E series  
Mechanical Specification  
Unit:mm  
UL1185 18AWG 1230 50mm for 5V  
UL1185 18AWG 1830 50mm for others  
30 10mm  
65 1  
ID 2.1 x OD 5.5  
C"+"  
9.5 0.5mm  
Plug Assignment  
Standard plug: P1I (option)  
P1I  
P/N  
OUTPUT  
CENTER  
+
Derating Curve  
Static Characteristics(24V)  
Ta=25  
32  
28  
24  
20  
16  
12  
8
300  
250  
200  
150  
100  
100  
70  
50  
25  
0
10  
20  
30  
40  
50  
50 70  
90 110 120 140 160 180 200 220 240 264  
Ta (  
)
INPUT VOLTAGE(VAC)60Hz  
File Name:GS12E-SPEC 2008-05-06  

相关型号:

GS12E09-P1I

10 ~ 12WAC-DC Single Output Wall-mounted type
MEANWELL

GS12E12

10 ~ 12WAC-DC Single Output Wall-mounted type
MEANWELL

GS12E12-P1I

10 ~ 12WAC-DC Single Output Wall-mounted type
MEANWELL

GS12E15

10 ~ 12WAC-DC Single Output Wall-mounted type
MEANWELL

GS12E15-P1I

10 ~ 12WAC-DC Single Output Wall-mounted type
MEANWELL

GS12E18

10 ~ 12WAC-DC Single Output Wall-mounted type
MEANWELL

GS12E18-P1I

10 ~ 12WAC-DC Single Output Wall-mounted type
MEANWELL

GS12E24

10 ~ 12WAC-DC Single Output Wall-mounted type
MEANWELL

GS12E24-P1I

10 ~ 12WAC-DC Single Output Wall-mounted type
MEANWELL

GS12E_11

10 ~ 12WAC-DC Single Output Wall-mounted type
MEANWELL

GS12L-240

RING TONGUE TERMINAL Non-insulated DIN 46234
ETC

GS12L-300

RING TONGUE TERMINAL Non-insulated DIN 46234
ETC