HLG-240H [MEANWELL]
240W Single Output Switching Power Supply; 240W单路输出开关电源![HLG-240H](http://pdffile.icpdf.com/pdf1/p00175/img/icpdf/HLG-2_982756_icpdf.jpg)
型号: | HLG-240H |
厂家: | ![]() |
描述: | 240W Single Output Switching Power Supply |
文件: | 总6页 (文件大小:342K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
240W Single Output Switching Power Supply
HLG-240H series
Features :
Universal AC input / Full range (up to 305VAC)
Built-in active PFC function
Protections: Short circuit / Over current / Over voltage / Over temperature
Cooling by free air convection
OCP point adjustable through output cable or internal potentiometer
IP67 / IP65 design for indoor or outdoor installations
Three in one dimming function (1~10Vdc or PWM signal or resistance)
Suitable for LED lighting and street lighting applications
Compliance to worldwide safety regulations for lighting
Suitable for dry / damp / wet locations
5 years warranty (Note.10)
110
F
SELV
IP65 IP67
HLG-240H-12
A
Blank : IP67 rated. Cable for I/O connection.
A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.
B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistance.
C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal
potentiometer.
SPECIFICATION
HLG-240H-36
HLG-240H-42
MODEL
HLG-240H-12
HLG-240H-15
HLG-240H-20
HLG-240H-24
HLG-240H-30
HLG-240H-48
HLG-240H-54
36V
42V
DC VOLTAGE
12V
15V
20V
24V
30V
48V
54V
18 ~ 36V
6.7A
21 ~ 42V
5.72A
CONSTANT CURRENT REGION Note.4 6 ~12V
7.5 ~ 15V
15A
10 ~ 20V
12A
12 ~ 24V
10A
15 ~ 30V
8A
24 ~ 48V
5A
27 ~ 54V
4.45A
RATED CURRENT
RATED POWER
16A
241.2W
250mVp-p
240.2W
250mVp-p
192W
225W
240W
240W
240W
200mVp-p
240W
250mVp-p
240.3W
350mVp-p
RIPPLE & NOISE (max.) Note.2 150mVp-p
150mVp-p
150mVp-p
150mVp-p
33.5 ~ 38.5V 39 ~ 45V
VOLTAGE ADJ. RANGE Note.6 11.2 ~ 12.8V 14 ~ 16V 18.6 ~ 21.4V 22.4 ~ 25.6V 28 ~ 32V
Can be adjusted by internal potentiometer or through output cable
44.8 ~ 51.2V 50 ~ 57V
OUTPUT
CURRENT ADJ. RANGE
8 ~ 16A
VOLTAGE TOLERANCE Note.3 2.5%
3.3 ~ 6.7A
1.0%
2.86 ~ 5.72A
7.5 ~ 15A
2.0%
6 ~ 12A
1.0%
5 ~ 10A
1.0%
4 ~ 8A
1.0%
0.5%
0.5%
2.5 ~ 5A
1.0%
2.23 ~ 4.45A
1.0%
0.5%
0.5%
1.0%
0.5%
0.5%
0.5%
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
Note.8 2.0%
1.5%
1.0%
0.5%
0.5%
Note.9 2500ms, 80ms at full load 230VAC /115VAC
HOLD UP TIME (Typ.)
VOLTAGE RANGE
15ms at full load 230VAC /115VAC
Note.5 90 ~ 305VAC
127 ~ 431VDC
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
47 ~ 63Hz
PF>0.98/115VAC, PF>0.95/230VAC at full load (Please refer to "Power Factor Characteristic" curve)
INPUT
90%
92%
2A / 230VAC
93%
93%
93.5%
94%
90%
93%
93%
4A / 115VAC
COLD START 75A/230VAC
<0.75mA / 277VAC
95 ~ 108%
OVER CURRENT
Note.4
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is removed.
SHORT CIRCUIT
OVER VOLTAGE
33 ~ 39V
43 ~ 49V
48 ~ 54V
55 ~ 63V
58 ~ 65V
13.5 ~ 18V
Protection type : Shut down and latch off o/p voltage, re-power on to recover
95 (TSW1)
17.5 ~ 21.5V 23.5 ~ 27.5V 27 ~ 34V
PROTECTION
5
105
5
(TSW1)
OVER TEMPERATURE
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
-40 ~ +70 (Refer to "Derating Curve")
WORKING TEMP.
20 ~ 95% RH non-condensing
WORKING HUMIDITY
-40 ~ +80 , 10 ~ 95% RH
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
0.03%/ (0 ~ 50
)
VIBRATION
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL1012, TUV EN61347-1, EN61347-2-13 independent (except for HLG-240H C type), UL60950-1, UL8750, TUV EN60950-1,
J61347-1, J61347-2-13, IP65 or IP67 approved
SAFETY STANDARDS Note.7
SAFETY &
EMC
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C ( 50% load) ; EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, heavy industry level (surge 4KV), criteria A
EMC IMMUNITY
MTBF
207.9Khrs min. MIL-HDBK-217F (25
)
244.2*68*38.8mm (L*W*H)(HLG-240H-Blank/A/B)
1.3Kg; 12pcs/16.6Kg/0.78CUFT(HLG-240-Blank/A/B)
251*68*38.8mm (L*W*H)(HLG-240H-C)
OTHERS
NOTE
DIMENSION
PACKING
1.23Kg; 12pcs/15.8Kg/1.16CUFT(HLG-240-C)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Constant current operation region is within 50% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please
reconfirm special electrical requirements for some specific system design.
5. Derating may be needed under low input voltages. Please check the static characteristics for more details.
6. Type A and type C only.
7. Safety and EMC design refer to EN60598-1, subject 8750(UL), CNS15233, GB7000.1, FCC part18.
8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
10. Refer to warranty statement.
240W Single Output Switching Power Supply
HLG-240H series
Mechanical Specification
Case No.994C
Unit:mm
Blank:(HLG-240H)
244.2
220.2
12
9.6
300 20
300 20
T case
FG
(Green/Yellow)
-V(Black)
+V(Red)
110.1
AC/L(Brown)
AC/N(Blue)
SJTW 18AWG 3C
SJTW 14AWG 2C
4.2 4PL
T case: Max. Case Temperature.
IP67 rated. Cable for I/O connection.
A Type:(HLG-240H-_A)
244.2
220.2
12
9.6
300 20
300 20
T case
FG
(Green/Yellow)
-V(Black)
+V(Red)
110.1
AC/L(Brown)
AC/N(Blue)
SJTW 18AWG 3C
SJTW 14AWG 2C
Vo
ADJ.
Io
ADJ.
4.2 4PL
T case: Max. Case Temperature.
IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.
(Can access by removing the rubber stopper on the case.)
B Type:(HLG-240H-_B)
244.2
220.2
12
9.6
300 20
300 20
-V(Black)
+V(Red)
T case
FG
(Green/Yellow)
110.1
SJTW 14AWG 2C
SJTW 18AWG 2C
AC/L(Brown)
AC/N(Blue)
DIM+(Blue)
DIM-(White)
SJTW 18AWG 3C
4.2 4PL
T case: Max. Case Temperature.
File Name:HLG-240H-SPEC 2011-07-28
240W Single Output Switching Power Supply
HLG-240H series
C Type:(HLG-240H-_C)
251
15.4
8
220.2
1
2
3
T case
1
110.1
O/P
I/P
2
Vo
ADJ.
Io
ADJ.
4.2 4PL
T case: Max. Case Temperature.
Output voltage and constant current level can be adjusted through internal potentiometer.
(Can access by removing the rubber stopper on the case.)
AC Input Terminal Pin No. Assignment
Pin No. Assignment
DC Output Terminal Pin No. Assignment
Pin No. Assignment
1
2
3
FG
1
2
-V
AC/L
AC/N
+V
Block Diagram
Fosc : 100KHz
RECTIFIERS
&
FILTER
EMI FILTER
&
RECTIFIERS
POWER
SWITCHING
PFC
+V
-V
I/P
FG
CIRCUIT
DIM+
DIM-
O.L.P.
(B Type)
DETECTION
CIRCUIT
O.L.P.
PWM & PFC
CONTROL
PFC
CONTROL
O.V.P.
Derating Curve
Static Characteristics
100
90
80
70
60
50
40
230VAC
100
80
100VAC
60
40
20
(HORIZONTAL)
90 100 125 135 145 155 165 175 180 200 230 305
-40
-25
-10
0
15
30
50
60
70
INPUT VOLTAGE (V) 60Hz
AMBIENT TEMPERATURE (
)
File Name:HLG-240H-SPEC 2011-07-28
240W Single Output Switching Power Supply
HLG-240H series
Power Factor Characteristic
Constant Current Mode
1 .0 0
0 .9 8
0 .9 6
0 .9 4
0 .9 2
0 .9 0
0 .8 8
0 .8 6
0 .8 4
0 .8 2
0 .8 0
0 .7 8
2 3 0 V a c
1 1 5 V a c
5 0 %
6 0 %
7 0 %
8 0 %
LOAD
9 0 %
1 0 0 %
(240W)
EFFICIENCY vs LOAD (48V Model)
HLG-240H series possess superior working efficiency that up to 93.5% can be reached in field applications.
96
92
88
230Vac
84
80
76
115Vac
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD
DRIVING METHODS OF LED MODULE
There are two major kinds of LED drive method "direct drive" and "with LED driver".
A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs.
Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B).
(B)
100
Constant
Current area
(A) Constant
Voltage area
50
(max.)
(C)
Hiccup
Protection
50
95
Io (%)
Typical LED power supply I-V curve
File Name:HLG-240H-SPEC 2011-07-28
240W Single Output Switching Power Supply
HLG-240H series
DIMMING OPERATION
-V(Black)
+V(Red)
FG
(Green/Yellow)
HLG-240H
AC/L(Brown)
AC/N(Blue)
DIM+(Blue)
DIM-(White)
Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or
1 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-.
Please DO NOT connect "DIM-" to "-V".
Reference resistance value for output current adjustment (Typical)
Single driver
10K
20K
30K
40K
50K
60K
70K
80K
90K
100K
OPEN
-----
Resistance
value
Multiple drivers
(N=driver quantity for synchronized
dimming operation)
10K /N 20K /N 30K /N 40K /N 50K /N 60K /N 70K /N 80K /N 90K /N 100K /N
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
9V
100% 95%~105%
1 ~ 10V dimming function for output current adjustment (Typical)
Dimming value
1V
2V
3V
4V
5V
6V
7V
8V
10V
OPEN
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90% 100% 95%~105%
10V PWM signal for output current adjustment (Typical): Frequency range :100HZ ~ 3KHz
Duty value
10%
10%
20%
20%
30%
30%
40%
40%
50%
50%
60%
60%
70%
70%
80%
80%
90% 100%
OPEN
Percentage of rated current
90% 100% 95%~105%
Using the built-in dimming function on B-type model can't turn the lighting fixture totally dark. Please refer to the connection method below to
achieve 0% brightness of the lighting fixture connecting to the LED power supply unit.
Dimming connection diagram for turning the lighting fixture ON/OFF :
N
FG
L
Switch
Adjuster
Relay
0~100K Ohms resistance
1~10V DC Voltage
10V PWM Signal
Blue
DIM+
DIM-
Green/
Yellow
White
HLG-240H
B Type
AC/L
AC/N
Black
Red
Brown
Blue
V(-)
V(+)
LED Lighting Fixture
Using a switch and relay can turn ON/OFF the lighting fixture.
1.Output constant current level can be adjusted through output cable by connecting a resistance or 1~10Vdc or 10V PWM signal between DIM+ and DIM-.
2.The LED lighting fixture can be turned ON/OFF by the switch.
File Name:HLG-240H-SPEC 2011-07-28
240W Single Output Switching Power Supply
HLG-240H series
WATERPROOF CONNECTION
Waterproof connector
Waterproof connector can be assembled on the output cable of HLG-240H to operate in dry/wet/damp or outdoor environment.
AC
HLG-240H
source
I/P
O/P
Size
M12
Pin Configuration (Female)
Size
Pin Configuration (Female)
M15
4-PIN
5A/PIN
5-PIN
5A/PIN
2-PIN
12A/PIN
M15-02
12A max.
Order No.
M12-04
10A max.
M12-05
10A max.
Order No.
LED Lamp
Suitable Current
Suitable Current
Cable Joiner
CJ04-1 suitable for 14AWG~16AWG
CJ04-2 suitable for 18AWG~22AWG
66
26
20
Up to four wires can be connected through this cable joiner by
soldering or clamping by tools.
LED Lamp
HLG-240H
O/P Wires
CJ04 cable joiner can be purchased independently for user's own assembly.
MEAN WELL order No. : CJ04-1, CJ04-2.
Junction Box(Option )
220.2
76
10
382.2
5
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
-V(Black)
+V(Red)
SJTW 14AWG 2C
SJTW 18AWG 3C
2-
5
3- PF 1/2"
150 20
3- PF 1/2"
150 20
86
Optional junction box available for A / Blank - type, please contact MEAW WELL for details.
File Name:HLG-240H-SPEC 2011-07-28
相关型号:
©2020 ICPDF网 联系我们和版权申明