HVGC-100-350 [MEANWELL]
100W Single Output LED Power Supply; 100W单路输出LED驱动电源![HVGC-100-350](http://pdffile.icpdf.com/pdf1/p00175/img/icpdf/HVGC-_984761_icpdf.jpg)
型号: | HVGC-100-350 |
厂家: | ![]() |
描述: | 100W Single Output LED Power Supply |
文件: | 总6页 (文件大小:327K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
100W Single Output LED Power Supply
HVGC-100 series
Features :
Constant current design
Wide input range 180~480VAC
Built-in active PFC function
High efficiency up to 91%
Protections: Short circuit / Over voltage / Over temperature
Cooling by free air convection
OCP point adjustable through output cable or internal potentiometer
IP67 / IP65 design for indoor or outdoor installations
Three in one dimming function (0~10Vdc or 10V PWM signal or resistance)
Suitable for LED lighting and street lighting applications
Compliance to worldwide safety regulations for lighting
Suitable for dry / damp / wet locations
5 years warranty (Note.6)
110
F
M
M
IP65 IP67
HVGC-100-350
A
A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.
B : IP67 rated. Constant current level adjustable through output cable with 0~10Vdc or 10V PWM signal or resistance.
D
(option) : IP67 rated. Timer dimming function, contact MEAN WELL for details.
SPECIFICATION
MODEL
HVGC-100-350
HVGC-100-700
RATED CURRENT
350mA
5.0%
700mA
CURRENT ACCURACY
MAX. OUTPUT VOLTAGE
RATED POWER
3 ~ 285V
99.75W
3 ~ 142V
99.4W
OUTPUT
RIPPLE & NOISE (max.) Note.2 1Vp-p
0.5Vp-p
Can be adjusted by internal potentiometer or through output cable
210 ~ 350mA
CURRENT ADJ. RANGE
420 ~ 700mA
SETUP, RISE TIME
3000ms, 150ms at full load 440VAC / 347VAC ; B type 5000ms, 150ms at 95% load 440VAC / 347VAC
30ms at full load 440VAC / 347VAC
HOLD UP TIME (Typ.)
VOLTAGE RANGE
Note.3 180 ~ 480VAC
47 ~ 63Hz
PF 0.98/230VAC, PF 0.98/277VAC, PF 0.97/347VAC, PF 0.94/440VAC at full load (Please refer to "Power Factor Characteristic" curve)
254VDC ~ 679VDC
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
INPUT
91%
91%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
0.32A / 347VAC
0.26A / 440VAC
COLD START 50A / 440VAC
<0.75mA / 440VAC
Constant current limiting, recovers automatically after fault condition is removed
300 ~ 320V
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
100 10 (RTH2)
SHORT CIRCUIT
OVER VOLTAGE
150 ~ 160V
PROTECTION
ENVIRONMENT
OVER TEMPERATURE
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
-40 ~ +70 (Refer to "Derating Curve")
WORKING TEMP.
20 ~ 95% RH non-condensing
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-40 ~ +80 , 10 ~ 95% RH
0.03%/ (0 ~ 50
)
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY STANDARDS Note.4
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
UL8750, CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent, IP65 or IP67 approved
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC
SAFETY &
EMC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55015, EN61000-3-2 Class C ( 50% load) ; EN61000-3-3, FCC part 15 class B
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge 4KV), criteria A
EMC IMMUNITY
MTBF
186.1Khrs min. MIL-HDBK-217F (25
236*68*38.8 mm (L*W*H)
)
OTHERS
NOTE
DIMENSION
PACKING
1.18Kg; 12pcs/15.2Kg/0.74CUFT
1. All parameters NOT specially mentioned are measured at 347VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 2.2uf parallel capacitor.
3. Derating may be needed under low input voltages. Please check the static characteristics for more details.
4. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1.
5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. Refer to warranty statement.
File Name:HVGC-100-SPEC 2011-12-16
100W Single Output LED Power Supply
HVGC-100 series
Mechanical Specification
Case No.994
Unit:mm
A Type:(HVGC-100-_A)
236
212
12
9.6
Io
ADJ.
300 20
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
T case
104.4
300 20
+V(Red)
-V(Black)
SJTW 18AWG 3C
SJTW 18AWG 2C
4.2 4PL
T case: Max. Case Temperature.
IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.
(Can access by removing the rubber stopper on the case.)
B Type:(HVGC-100-_B)
236
212
12
9.6
300 20
UL2517 18AWG 2C
300 20
DIM+(Blue)
DIM-(White)
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
T case
104.4
SJTW 18AWG 2C
SJTW 18AWG 3C
+V(Red)
-V(Black)
4.2 4PL
T case: Max. Case Temperature.
D Type(option):(HVGC-100-_D)
236
212
12
9.6
300 20
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
T case
104.4
300 20
+V(Red)
-V(Black)
SJTW 18AWG 3C
SJTW 18AWG 2C
4.2 4PL
T case: Max. Case Temperature.
IP67 rated. Timer dimming function, contact MEAN WELL for details.
File Name:HVGC-100-SPEC 2011-12-16
100W Single Output LED Power Supply
HVGC-100 series
Block Diagram
Fosc : 80KHz
RECTIFIERS
&
FILTER
EMI FILTER
&
RECTIFIERS
POWER
SWITCHING
PFC
+V
-V
I/P
FG
CIRCUIT
DIM+
DIM-
O.L.P.
(B Type)
DETECTION
CIRCUIT
O.L.P.
O.T.P.
PWM & PFC
CONTROL
PFC
CONTROL
O.V.P.
Derating Curve
Static Characteristics
100
90
80
70
60
50
40
100
80
60
40
20
(HORIZONTAL)
-40
-25
-10
0
15
30
50
60
70
180
347
440
480
AMBIENT TEMPERATURE (
)
INPUT VOLTAGE (V) 60Hz
Power Factor Characteristic
Constant Current Mode
1.00
0.98
0.96
0.94
0.92
0.90
0.88
0.86
0.84
0.82
0.80
440V
347V
277V
230V
50%
60%
70%
80%
90%
100%
(100W)
LOAD
File Name:HVGC-100-SPEC 2011-12-16
100W Single Output LED Power Supply
HVGC-100 series
EFFICIENCY vs LOAD (HVGC-100-700 Model)
HVGC-100 series possess superior working efficiency that up to 91% can be reached in field applications.
0.94
0.90
0.86
0.82
440V
347V
277V
230V
0.78
0.74
0.70
0.66
0.62
0.58
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD
DRIVING METHODS OF LED MODULE
There are two major kinds of LED drive method "direct drive" and "with LED driver".
A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs.
Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B).
100
(A) Constant
(B)
Voltage area
Constant
Current area
50
(max.)
50
100
Io (%)
Typical LED power supply I-V curve
File Name:HVGC-100-SPEC 2011-12-16
100W Single Output LED Power Supply
HVGC-100 series
DIMMING OPERATION
DIM+(Blue)
DIM-(White)
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
HVGC-100
+V(Red)
-V(Black)
Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or
0 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-.
Please DO NOT connect "DIM-" to "-V".
Reference resistance value for output current adjustment (Typical)
Single driver
10K
20K
30K
40K
50K
60K
70K
80K
90K
100K
OPEN
-----
Resistance
value
Multiple drivers
(N=driver quantity for synchronized
dimming operation)
10K /N 20K /N 30K /N 40K /N 50K /N 60K /N 70K /N 80K /N 90K /N 100K /N
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100% 102%~108%
0 ~ 10V dimming function for output current adjustment (Typical)
Dimming value
0V
1V
2V
3V
4V
5V
6V
7V
8V
9V
10V
OPEN
Percentage of rated current
0%
10%
20%
30%
40%
50%
60%
70%
80%
90% 100% 102%~108%
10V PWM signal for output current adjustment (Typical): Frequency range :100Hz ~ 3KHz
Duty value
10%
10%
20%
20%
30%
30%
40%
40%
50%
50%
60%
60%
70%
70%
80%
80%
90% 100%
OPEN
Percentage of rated current
90% 100% 102%~108%
WATERPROOF CONNECTION
Waterproof connector
Waterproof connector can be assembled on the output cable of HVGC-100 to operate in dry/wet/damp or outdoor environment.
AC
HVGC-100
source
I/P
O/P
Size
M12
Pin Configuration (Female)
Size
Pin Configuration (Female)
M15
4-PIN
5A/PIN
5-PIN
5A/PIN
2-PIN
12A/PIN
M15-02
12A max.
Order No.
M12-04
10A max.
M12-05
10A max.
Order No.
LED Lamp
Suitable Current
Suitable Current
File Name:HVGC-100-SPEC 2011-12-16
100W Single Output LED Power Supply
HVGC-100 series
Cable Joiner
CJ04-1 suitable for 14AWG~16AWG
CJ04-2 suitable for 18AWG~22AWG
66
26
20
Up to four wires can be connected through this cable joiner by
soldering or clamping by tools.
LED Lamp
HVGC-100
O/P Wires
CJ04 cable joiner can be purchased independently for user's own assembly.
MEAN WELL order No. : CJ04-1, CJ04-2.
Junction Box(Option )
208.8
370.8
76
10
5
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
+V(Red)
-V(Black)
SJTW 18AWG 2C
SJTW 18AWG 3C
2-
5
3- PF 1/2"
150 20
3- PF 1/2"
150 20
86
Optional junction box available for A / Blank - type, please contact MEAW WELL for details.
File Name:HVGC-100-SPEC 2011-12-16
相关型号:
©2020 ICPDF网 联系我们和版权申明