IDPV-25A-12 [MEANWELL]

25W PWM Output LED Driver;


型号：	IDPV-25A-12
厂家：	MEAN WELL ENTERPRISES CO., LTD.
描述：	25W PWM Output LED Driver
文件：	总6页 (文件大小：140K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

25W PWM Output LED Driver

IDPV-25 series

SELV

■ Features

■ Applications

ꢀIndoor LED lighting

ꢀLED strip lighting

ꢀConstant Voltage PWM style output

with frequency1KHz

ꢀLED lighting decorative

ꢀIndoor LED lighting

ꢀLED architecture lighting

ꢀLED decorative lighting

ꢀMoving sign

ꢀPCB type design

ꢀBuilt-in active PFC function

ꢀNo load power consumption<0.5W(Blank-Type)

ꢀFunction options: 2 in 1 dimming (dim-to-off);

AuxiliaryDC output

ꢀLED architecture lighting

ꢀTunnel lighting

ꢀ3 years warranty

■ Description

IDPV-25 series is a 25W PCB type AC/DC LED driver featuring the constant voltage mode PWM style

output design. IDPV-25 operates from 90～295VAC and offers models with different rated voltage

ranging between 12V and 60V. Thanks to the high efficiencyup to 84%, with the fanless design,

the entire series is able to operate for -20℃~+45℃ ambient temperature under free air convection.

IDPV-25 is equipped with various function options, such as dimming methodologies, so as to provide

the design flexibilityfor LED lighting system.

■ Model Encoding

- 12

IDPV

Rated output voltage(12/24/36/48/60V)

Function options

Rated wattage

Series name

Type

Function

2 in 1 dimming (0~10VDC and 10V PWM)

2 in 1 dimming and AuxiliaryDC output

Note

Blank

In Stock

File Name:IDPV-25-SPEC 2018-03-15

25W PWM Output LED Driver

IDPV-25 series

SPECIFICATION

MODEL

IDPV-25 -12

IDPV-25 -24

IDPV-25 -36

36V

IDPV-25 -48

IDPV-25 -60

DC VOLTAGE

12V

24V

48V

60V

0.7A

CONSTANT CURRENT REGION 1.8A

0.52A

24.96W

0.42A

25.2W

1.05A

25.2W

21.6W

RATED POWER

0~100%

DIMMING RANGE

OUTPUT

VOLTAGE TOLERANCE

PWM FREQUENCY (Typ.)

SETUP TIME Note.3

AUXILIARY DC OUTPUT Note.4

10%

1KHz ( 20%)

500ms / 230VAC 1200ms/115VAC

Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only

90 ~ 295VAC 127 ~ 417VDC

VOLTAGE RANGE Note.2

FREQUENCY RANGE

POWER FACTOR (Typ.)

(Please refer to "STATIC CHARACTERISTIC" section)

47 ~ 63Hz

PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load

(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

THD< 20%(@load≧70%/115VAC,230VAC; @load≧75%/277VAC)

(Please refer to “TOTAL HARMONIC DISTORTION” section)

INPUT

TOTAL HARMONIC DISTORTION

83%

84%

EFFICIENCY (Typ.)

80%

82%

81%

AC CURRENT (Typ.)

INRUSH CURRENT(Typ.)

0.4A / 115VAC

0.16A / 230VAC

0.13A / 277VAC

COLD START 30A(twidth=150μs measured at 50% Ipeak) at 230VAC; Per NEMA 410

32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC

<0.75mA / 277VAC

MAX. No. of PSUs on 16A

CIRCUIT BREAKER

LEAKAGE CURRENT

<0.5W for Blank-Type, <1.2W for A-Type

NO LOAD POWER CONSUMPTION

Shut down output voltage, re-power on to recover

SHORT CIRCUIT

105 ~ 120%

PROTECTION

ENVIRONMENT

OVER CURRENT

Protection type : Constant current limiting, recovers automatically after fault condition is removed

WORKING TEMP.

Ta=-20 ~ +45℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)

20 ~ 90% RH non-condensing

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

-40 ~ +80℃, 10 ~ 95% RH

0.03%/℃ (0 ~ 45℃)

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

UL8750,CSA C22.2 NO.250.13-12;ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14 approved

I/P-O/P:3.75KVAC

SAFETY STANDARDS

WITHSTAND VOLTAGE

SAFETY &

EMC

ISOLATION RESISTANCE

EMC EMISSION

EMC IMMUNITY

MTBF

I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH

Compliance to EN55015, EN61000-3-2 Class C (@load≧70%) ; EN61000-3-3,GB17743,GB17625.1

Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Line:1KV)

382.7Khrs min. MIL-HDBK-217F (25℃)

OTHERS DIMENSION

PACKING

114.5*72.5*20mm (L*W*H)

0.145Kg;72pcs/11.44Kg/1.13CUFT

1. All parameters NOT speciallymentioned are measured at 230VAC input, rated current and 25 ℃of ambient temperature.

2. De-rating maybe needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details.

NOTE

3. Length of set up time is measured at cold first start. Turning ON/OFF the driver maylead to increase of the set up time.

4. Aux. 12V will be damaged with short circuit; It will not be available with dimming off or output no load condition.

5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be

affected bythe complete installation, the final equipment manufacturers must re-qualifyEMC Directive on the complete installation again.

6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

7. When the environment temperature is high, adding a heat sink at the bottom of the product can help cooling.

The Part No of the heat sink is 1GG1HS-GZ236A.

File Name:IDPV-25-SPEC 2018-03-15

25W PWM Output LED Driver

IDPV-25 series

DIMMING OPERATION

AC/L

AC/N

TB1

DIM-

DIM+

TB2

Vo-

Vo+

※ Dimming principle for PWM style output

ꢀDimming is achieved by varying the duty cycle of the output current.

Output DC current

TON

Duty cycle(%) =

×100%

Output PWM frequency : 1KHz ( 20%)

OFF

Io=0A

TON

※ 2 in 1 dimming function

◎ Applying additive 0 ~ 10VDC

100%

90%

80%

70%

60%

50%

40%

30%

20%

10%

Vo+

Vo-

DIM+

Additive Voltage

DIM-

“DO NOT connect "DIM- to Vo-”

0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V

Dimming input: Additive voltage

100%

90%

80%

70%

60%

50%

40%

30%

20%

10%

◎ Applying additive 10V PWM signal (frequency range 300~3KHz):

Vo+

Vo-

DIM+

Additive PWM signal

DIM-

“DO NOT connect "DIM- to Vo-”

0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

Duty cycle of additive 10V PWM signal dimming input

Note : 1. Min. duty cycle of output current is about 9% and the output current is not defined when 0%< Iout<9%.

2. The duty cycle of output current could drop down to 0% when dimming input is about 0Vdc, or 10V PWM signal with 0% duty cycle.

File Name:IDPV-25-SPEC 2018-03-15

25W PWM Output LED Driver

IDPV-25 series

OUTPUT LOAD vs TEMPERATURE

100

for 12V only

(HORIZONTAL)

-20

-10

35 40 45

AMBIENT TEMPERATURE,Ta (℃)

STATIC CHARACTERISTIC

POWER FACTOR (PF) CHARACTERISTIC

0.98

0.96

0.94

0.92

0.9

100

277V

230V

115V

0.88

70%

80%

90%

100%

100

295

135

180 200

INPUT VOLTAGE (V)

LOAD

※De-rating is needed under low input voltage.

TOTAL HARMONIC DISTORTION (THD)

EFFICIENCY vs LOAD

IDPV-25 series possess superior working efficiency that up to 84% can

be reached in field applications.

※ 36V Model

17%

15%

13%

11%

277VAC

230VAC

115VAC

277V

230V

115V

70%

80%

90%

100%

70%

80%

90%

100%

LOAD

File Name:IDPV-25-SPEC 2018-03-15

25W PWM Output LED Driver

IDPV-25 series

BLOCK DIAGRAM

fosc : 70KHz

AUX+(for A-Type)

AUX-(for A-Type)

RECTIFIERS

FILTER

EMI FILTER

RECTIFIERS

POWER

SWITCHING

Vo+

Vo-

I/P

CURRENT

LIMIT

DIM+

DIM-

O.L.P.

DETECTION

CIRCUIT

PWM&PFC

CONTROL

MECHANICAL SPECIFICATION

Unit:mm

※ Blank-Type

114.5

106.5

AC/L

TB1

AC/L

AC/N

DIM-

DIM+

TB2

Vo-

Vo+

NOTE: Please use wires with a cross section of 0.75~1.5mm²for TB1

and wires with a cross section of 0.5~1.5mm²for TB2.

Terminal Pin No. Assignment(TB2)

Terminal Pin No. Assignment(TB1)

Pin No.

Assignment

ACL

Pin No.

Assignment

DIM-

ACL

DIM+

Vo-

ACN

Vo+

File Name:IDPV-25-SPEC 2018-03-15

25W PWM Output LED Driver

IDPV-25 series

※ A-Type

114.5

106.5

AC/L

AC/N

TB1

DIM-

TB2

DIM+

Aux-

Aux+

Vo-

Vo+

NOTE: Please use wires with a cross section of 0.75~1.5mm²for TB1

and wires with a cross section of 0.5~1.5mm²for TB2.

Terminal Pin No. Assignment(TB1)

Terminal Pin No. Assignment(TB2)

Pin No.

Assignment

Pin No.

Assignment

DIM-

Pin No.

Assignment

AUX+

Vo-

ACL

ACN

DIM+

AUX-

Vo+

INSTALLATION MANUAL

Please refer to : http://www.meanwell.com/manual.html

File Name:IDPV-25-SPEC 2018-03-15

相关型号：