IRM-30 [MEANWELL]
30W Single Output Encapsulated Type;型号: | IRM-30 |
厂家: | MEAN WELL ENTERPRISES CO., LTD. |
描述: | 30W Single Output Encapsulated Type |
文件: | 总4页 (文件大小:90K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
30W Single Output Encapsulated Type
IRM-30 series
Bauart gepruft
Sicherheit
egelma ge
o s
od
be wac
g
www.tuv.com
ID 2000000000
■ Features
■ Applications
ꢀUniversal AC input / Full range
ꢀCompact size
ꢀIndustrial electrical equipment
ꢀMechanical equipment
ꢀProtections: Short circuit / Overload / Over voltage
ꢀCooling by free air convection
ꢀIsolation ClassⅡ
ꢀFactory automation equipment
ꢀHand-held electronic device
ꢀNo load power consumption<0.1W
ꢀPass LPS
ꢀ100% full load burn-in test
ꢀHigh reliability
ꢀ3 years warranty
■ Description
IRM-30 is a 30W miniature (69.5*39*24mm) AC-DC module-type power supply, ready to be soldered onto
the PCB boards of various kinds of electronic instruments or industrial automation equipments. This product
allows the universal input voltage range of 85~264VAC. The 94V-0 flame retardant plastic case and
the fully-potted silicone enhance the heat dissipation and meet the anti-vibration demand up to 5G;
moreover, it provides the fundamental resistance to dust and moisture.
With the high efficiency up to 90% and the extremely low no-load power consumption below 0.1W, IRM-30
series fulfills the worldwide regulation for the low power consumption requirement for electronics. The entire
series is a Class Ⅱ design (no FG pin), incorporating the built-in EMI filtering components, enabling the
compliance with EN55022 Class B; the supreme EMC features keep the end electronic units from
electromagnetic interference. In addition to module-type model, IRM-30 series also offers the screw
terminal style model (ST).
■ Model Encoding
Blank : PCB mounting style
IRM - 30 - 5 ST
ST
: Screw terminal style
{
Output voltage
Output wattage
Series name
File Name:IRM-30-SPEC 2015-12-07
30W Single Output Encapsulated Type
IRM-30 series
SPECIFICATION
MODEL
IRM-30-5
IRM-30-12
IRM-30-15
IRM-30-24
IRM-30-48
DC VOLTAGE
5V
12V
15V
24V
48V
RATED CURRENT
CURRENT RANGE
RATED POWER
6A
2.5A
2A
1.3A
0.63A
0 ~ 0.63A
30.2W
300mVp-p
2.5%
0 ~ 6A
30W
0 ~ 2.5A
30W
0 ~ 2A
30W
0 ~ 1.3A
31.2W
240mVp-p
2.5%
RIPPLE & NOISE (max.) Note.2 120mVp-p
150mVp-p
2.5%
200mVp-p
2.5%
0.5%
0.5%
OUTPUT
VOLTAGE TOLERANCE Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
2.5%
0.5%
0.5%
0.5%
0.5%
1.0%
0.5%
0.5%
0.5%
1000ms, 30ms/230VAC
1500ms, 30ms/115VAC at full load
HOLD UP TIME (Typ.)
VOLTAGE RANGE
40ms/230VAC
85 ~ 264VAC
47 ~ 440Hz
83%
12ms/115VAC at full load
FREQUENCY RANGE
EFFICIENCY (Typ.)
88%
0.5A/230VAC
88%
88.5%
90%
INPUT
0.75A/115VAC
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
COLD START 25A/115VAC
< 0.25mA/240VAC
45A/230VAC
LEAKAGE CURRENT
105% ~ 160% rated output power
OVERLOAD
Protection type : Hiccup mode, recovers automatically after fault condition is removed
12.6 ~ 16.2V 15.75 ~ 20.25V 25.2 ~ 32.4V
PROTECTION
ENVIRONMENT
50.4 ~ 64V
5.25 ~ 6.75V
OVER VOLTAGE
Protection type : Shut off o/p voltage, clamping by zener diode
-30 ~ +70℃ (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-40 ~ +85℃, 10 ~ 95% RH
0.03%/℃ (0 ~ 50℃)
10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
SAFETY &
EMC
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, heavy industry level (surge L-N : 1KV), criteria A
MTBF
593.3Khrs min. MIL-HDBK-217F (25℃)
PCB mounting style : 69.5*39*24mm (L*W*H)
Screw terminal style : 91*39.5*28.5mm (L*W*H)
OTHERS
NOTE
DIMENSION
PCB mounting style : 0.109Kg;144pcs/16.7Kg/0.97CUFT
Screw terminal style :0.12Kg;120pcs/15.4Kg/0.74CUFT
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:IRM-30-SPEC 2015-12-07
30W Single Output Encapsulated Type
IRM-30 series
Block Diagram
fosc : 65KHz
RECTIFIERS
RECTIFIERS
+V
-V
POWER
SWITCHING
EMI
I/P
&
&
FILTER
FILTER
FILTER
PWM
DETECTION
CIRCUIT
CONTROL
Derating Curve
Output Derating VS Input Voltage
100VAC & 230VAC
for others
100
90
100
80
80
230VAC for 5V
70
60
40
100VAC for 5V
60
50
40
20
-30
0
10
20
30
40 45 50
60
70 (HORIZONTAL)
85 95 100 115 120 140 160 180 200 220 240 264
AMBIENT TEMPERATURE (℃)
INPUT VOLTAGE (VAC) 60Hz
File Name:IRM-30-SPEC 2015-12-07
30W Single Output Encapsulated Type
IRM-30 series
Mechanical Specification
Case No. Unit:mm
ꢀPCB mounting style
69.5
61.5
4
24
AC/L
AC/N
-V
3.5 1mm
+V
BOTTOM
VIEW
P/N diameter:1.04
ꢀScrew terminal style
39.5
23
28.5
6.4
4-ψ3.4
AC/L AC/N
+V -V
5
Installation Manual
Please refer to : http://www.meanwell.com/webnet/search/InstallationSearch.html
File Name:IRM-30-SPEC 2015-12-07
相关型号:
©2020 ICPDF网 联系我们和版权申明