PLM-25E-700 [MEANWELL]
230VAC ONLY OR FULL RANGE(UP TO 295VAC) MODELS AVAILABLE;型号: | PLM-25E-700 |
厂家: | MEAN WELL ENTERPRISES CO., LTD. |
描述: | 230VAC ONLY OR FULL RANGE(UP TO 295VAC) MODELS AVAILABLE |
文件: | 总4页 (文件大小:146K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
25W Single Output LED Power Supply
PLM-25 series
110
M
M
F
18
SELV
IP30
(for Blank type only)
(for E type only)
■ Features
■ Applications
ꢀIndoor LED lighting
ꢀLED office lighting
ꢀ230VAC only or Full range (up to 295VAC)
models available
ꢀBuilt-in active PFC function
ꢀConstant current design
ꢀLED commercial lighting
ꢀLED decorative lighting
ꢀProtections:Short circuit
ꢀCooling by free air convection
ꢀFully isolated plasticcase
ꢀClass Ⅱ power unit, no FG
ꢀClass 2 power unit(for PLM-25-500/700/1050)
ꢀNo load power consumption <0.5W
ꢀHigh reliability,low cost
ꢀ2 years warranty
■ Description
PLM-25 is a 25W economical AC/DC LED power supply series. Incorporating a built-in active PFC
design, PLM-25 provides a high Power Factor value greater than 0.9. In addition, with the low no load
power consumption below 0.5W, and the setup time less than 500ms, PLM-25 is complied with the ErP
regulation required by European Union for lighting fixtures.
PLM-25 is a class Ⅱ(without FG pin) power unit housed with the UL 94V-0 rated flame retardant
plastic case. The I/O terminals are designed with screw-less clamp style terminal block that greatly
simplifies the wiring installation. Two types of models with different input voltage range are offered:
PLM-25 series, which operates from 110~295VAC, and PLM-25E series, which operates from
180~295VAC.These two series are both constant current output design, supplying models with the
current of 350mA, 500mA, 700mA and 1050mA, respectively.
■ Model Encoding
PLM - 25 E - 350
Output current
Blank: AC input range 110~295VAC
{
E:AC input range 180~295VAC
Output wattage
Series name
File Name:PLM-25-SPEC 2015-11-02
25W Single Output LED Power Supply
PLM-25 series
SPECIFICATION
PLM-25 -350
PLM-25 -500
PLM-25 -700
PLM-25 -1050
MODEL
42 ~ 72V
0.35A
80V
30 ~ 50V
0.5A
21 ~ 36V
0.7A
14 ~ 24V
1.05A
CONSTANT CURRENT REGION Note.5
RATED CURRENT
56V
42V
NO LOAD OUTPUT VOLTAGE(max.)
RATED POWER
28V
25.2W
25W
25.2W
3.6Vp-p
5.4Vp-p
25.2W
2.4Vp-p
3.6Vp-p
OUTPUT
5.0Vp-p
7.5Vp-p
Blank type 7.2Vp-p
RIPPLE & NOISE
(max.) Note.2
E type
9Vp-p
5.0%
CURRENT ACCURACYNote.3
SETUP TIME
Blank type: 500ms / 115VAC, 230VAC at full load;
E type: 500ms / 230VAC at full load
254~ 417VDC
VOLTAGE RANGE Note.4 Blank type: 110 ~ 295VAC
FREQUENCY RANGE
47 ~ 63Hz
Blank type
156 ~ 417VDC; E type: 180 ~ 295VAC
PF≥0.97/115VAC,PF≥0.95/230VAC,PF>0.9/277VAC(at full load)(Please refer to "Power Factor Characteristic" curve)
PF≥0.95/230VAC,PF≥0.9/277VAC (at full load)(Please refer to "Power Factor Characteristic" curve)
THD< 20% when output loading≧60% at 115VAC/230VAC input and output loading≧75% at 277VAC input
THD< 20% when output loading≧60% at 230VAC input and output loading≧75% at 277VAC input
POWER FACTOR
E type
Blank type
E type
TOTAL HARMONIC
DISTORTION
INPUT
87%
86%
86%
85%
86%
85%
85%
82%
Blank type
E type
EFFICIENCY
(Typ.)
AC CURRENT
Blank type: 0.3A/115VAC 0.15A/230VAC 0.12A/277VAC; E type: 0.15A/230VAC 0.12A/277VAC
INRUSH CURRENT(Typ.) COLD START 15A(twidth=50μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A
80 units (circuit breaker of type B) / 80 units (circuit breaker of type C) at 230VAC
CIRCUIT BREAKER
0.25mA / 240VAC
LEAKAGE CURRENT
SHORT CIRCUIT
Hiccup mode, recovers automatically after fault condition is removed.
-30 ~ +45℃
PROTECTION
WORKING TEMP.
20 ~ 90% RH non-condensing
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
ENVIRONMENT
-40 ~ +80℃, 10 ~ 95% RH
0.06%/℃ (0 ~ 50℃)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL8750, CSA C22.2 No. 250.13-12(for Blank type only); ENEC EN61347-1, EN61347-2-13, EN62384,
GB19510.14,GB19510.1(for E type only),IP30 approved
SAFETY STANDARDS
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC
SAFETY &
EMC
ISOLATION RESISTANCE I/P-O/P:100M Ohms/500VDC / 25℃/ 70%RH
Compliance to EN55015, GB17743, GB17625.1(for E type only),EN61000-3-2 Class C(≥60% load);EN61000-3-3
EMC EMISSION
EMC IMMUNITY
MTBF
Compliance to EN61000-4-2,3,4,5,6,8,11;EN61547, light industry level, criteria B(surge 2KV)
808.162Khrs min. MIL-HDBK-217F (25℃)
145*38*22mm (L*W*H)
DIMENSION
OTHERS
0.126Kg;60pcs/8.6 Kg/0.48CUFT
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Please see "AC input voltage drop vs. output current characteristics" table.
NOTE
4. Derating may be needed under low input voltage, please check the static characteristic for more details.
5. Constant current operation region is within 60% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please
reconfirm special electrical requirements for some specific system design.
6. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
7. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers.
File Name:PLM-25-SPEC 2015-11-02
25W Single Output LED Power Supply
PLM-25 series
Mechanical Specification
Case No.PLM-25
Unit:mm
145
4.5
ψ3.5
1
2
2
1
T case
65
TB1
TB2
4.5
※ T case: Max. Case Temperature.
NOTE: The input and output line for using UL1015 18AWG*2C is suggested
Terminal Pin No. Assignment (TB1) :
SWITCHLAB MWX201-75002EB(GRAY)
Pin No. Assignment
Terminal Pin No. Assignment (TB2) :
SWITCHLAB MWX201-75002B(BLUE)
Pin No. Assignment
1
2
AC/L
AC/N
1
2
+V
-V
Block Diagram
POWER
SWITCH-
ING
RECTIFIERS
&
FILTER
+V
-V
I/P
EMI FILTER
RECTIFIERS
PWM /PFC
CONTROL
Derating Curve
Static Characteristics
100
90
80
70
60
50
40
100
80
60
40
20
-30
-25
-5
0
15
30
40
50
60
(HORIZONTAL)
45
110 120 125 135 145 155 165 175 180 200 230 295 (Blank type)
180 185 190 195 200 205 210 215 220 230 240 295 (E type)
AMBIENT TEMPERATURE (℃)
INPUT VOLTAGE (V)
File Name:PLM-25-SPEC 2015-11-02
25W Single Output LED Power Supply
PLM-25 series
Power Factor Characteristic
Constant Current Mode
Constant Current Mode
1.02
1
0.98
0.96
0.94
0.92
0.9
0.98
0.96
0.94
0.92
0.9
110V
230V
277V
230V
277V
0.88
0.86
0.84
0.82
0.88
0.86
0.84
0.82
60%
70%
80%
90%
100%
(25W)
60%
70%
80%
90%
100%
(25W)
LOAD
LOAD
Blank type
E type
EFFICIENCY vs LOAD (500mA Model)
86.2
86
86.5
86
85.8
85.6
85.4
85.2
85
85.5
85
110V
230V
277V
230V
84.5
84
277V
84.8
84.6
84.4
83.5
83
60%
70%
80%
90%
100%
60%
70%
80%
90%
100%
LOAD
LOAD
E type
Blank type
AC input voltage drop vs. output current characteristics
8%
3%
10%
5%
AC input drop
Io drop
<16%
<12%
<8%
<7%
NOTE: Output current will return to the rated value within 50ms
File Name:PLM-25-SPEC 2015-11-02
相关型号:
©2020 ICPDF网 联系我们和版权申明