PS-15 [MEANWELL]

15W Single Output Switching Power Supply; 15W单路输出开关电源


型号：	PS-15
厂家：	MEAN WELL ENTERPRISES CO., LTD.
描述：	15W Single Output Switching Power Supply 15W单路输出开关电源开关
文件：	总2页 (文件大小：282K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

15W Single Output Switching Power Supply

PS-15 series

Features :

Universal AC input / Full range

Low leakage current <0.5mA

Protections: Short circuit/Over load /Over voltage/Over temperature

Cooling by free air convection

100% full load burn-in test

Fix switching frequency at 67KHz

Low cost

High reliability

2 years warranty

SPECIFICATION

MODEL

PS-15-5

PS-15-12

PS-15-15

PS-15-24

PS-15-48

DC VOLTAGE

12V

15V

24V

48V

RATED CURRENT

CURRENT RANGE

RATED POWER

2.8A

0 ~ 2.8A

14W

1.25A

0 ~ 1.25A

15W

0.625A

0 ~ 0.625A

15W

0.313A

0 ~ 0.313A

15W

0 ~ 1A

15W

OUTPUT

RIPPLE & NOISE (max.) Note.2 100mVp-p

VOLTAGE TOLERANCE Note.3 2.0%

120mVp-p

2.0%

120mVp-p

2.0%

1.0%

150mVp-p

2.0%

200mVp-p

2.0%

LINE REGULATION

LOAD REGULATION

SETUP, RISE TIME

HOLD UP TIME(Typ.)

1.0%

0.5%

1.0%

0.5%

5 ~ 24V:1200ms, 30ms

100ms at full load

48V:1200ms, 75ms at full load

VOLTAGE RANGE

85 ~ 264VAC

47 ~ 63Hz

74%

120 ~ 370VDC

FREQUENCY RANGE

EFFICIENCY(Typ.)

77%

78%

79%

77%

INPUT

0.4A/115VAC

0.2A/230VAC

AC CURRENT (Typ.)

INRUSH CURRENT (Typ.)

COLD START 40A/230VAC

<0.5mA / 240VAC

LEAKAGE CURRENT

Above 105% rated output power

OVER LOAD

Protection type : Hiccup mode, recovers automatically after fault condition is removed

5.75 ~ 6.75V

13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V

Tj 140 typically (U1) Detect on main control IC

55.2 ~ 64.8V

OVER VOLTAGE

PROTECTION

OVER TEMPERATURE

Protection type : Hiccup mode, recovers automatically after fault condition is removed

-10 ~ +60 (Refer to output load derating curve)

20 ~ 90% RH non-condensing

WORKING TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

ENVIRONMENT

-20 ~ +85 , 10 ~ 95% RH

0.03%/ (0 ~ 50

10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes

SAFETY STANDARDS

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

EMI CONDUCTION & RADIATION

HARMONIC CURRENT

EMS IMMUNITY

EN60950-1 CB Approved by TUV

I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC

SAFETY &

I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC

Compliance to EN55022 (CISPR22) Class B

EMC

(Note 4)

Compliance to EN61000-3-2,-3

Compliance to EN61000-4-2,3,4,5,6,8,11 Light industry level, criteria A

94*49*25mm (L*W*H)

DIMENSION

OTHERS

NOTE

0.083Kg; 120pcs/10.96Kg

PACKING

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets

EMC directives.

File Name:PS-15-SPEC 2006-04-13

15W Single Output Switching Power Supply

PS-15 series

Mechanical Specification

Unit:mm

To chassis Grounding

CN1

CN2

AC Input Connector (CN2) : JST B3P-VH or equivalent

DC Output Connector (CN1) : JST B2P-VH or equivalent

Pin No. Assignment