首页 |元器件品牌

RS-100-48 [MEANWELL]

100W Single Output Switching Power Supply; 100W单路输出开关电源
RS-100-48
型号： RS-100-48
厂家： MEAN WELL ENTERPRISES CO., LTD.    MEAN WELL ENTERPRISES CO., LTD.
描述：

100W Single Output Switching Power Supply
100W单路输出开关电源

开关
文件： 总2页 (文件大小：387K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
100W Single Output Switching Power Supply  
RS-100 series  
Features :  
Universal AC input / Full range  
Protections:Short circuit/Over load/Over voltage  
Cooling by free air convection  
LED indicator for power on  
100% full load burn-in test  
All using 105 long life electrolytic capacitors  
Withstand 300VAC surge input for 5 second  
High operating temperature up to 70  
Withstand 5G vibration test  
High efficiency, long life and high reliability  
3 years warranty  
SPECIFICATION  
MODEL  
RS-100-3.3  
RS-100-5  
RS-100-12  
RS-100-15  
RS-100-24  
RS-100-48  
DC VOLTAGE  
3.3V  
5V  
12V  
15V  
24V  
48V  
RATED CURRENT  
CURRENT RANGE  
RATED POWER  
20A  
16A  
8.5A  
7A  
4.5A  
2.3A  
0 ~ 20A  
66W  
0 ~ 16A  
80W  
0 ~ 8.5A  
102W  
0 ~ 7A  
105W  
0 ~ 4.5A  
108W  
0 ~ 2.3A  
110.4W  
200mVp-p  
45.6 ~ 52.8V  
1.0%  
RIPPLE & NOISE (max.) Note.2 80mVp-p  
VOLTAGE ADJ. RANGE  
VOLTAGE TOLERANCE Note.3 3.0%  
80mVp-p  
4.75 ~ 5.5V  
2.0%  
120mVp-p  
11.4 ~ 13.2V  
1.0%  
120mVp-p  
14.25 ~ 16.5V  
1.0%  
120mVp-p  
22.8 ~ 26.4V  
1.0%  
OUTPUT  
3.2V ~ 3.5V  
LINE REGULATION  
LOAD REGULATION  
SETUP, RISE TIME  
HOLD TIME (Typ.)  
Note.4 0.5%  
Note.5 2.0%  
0.5%  
0.5%  
0.5%  
0.5%  
0.5%  
1.0%  
0.5%  
0.5%  
0.5%  
0.5%  
500ms, 20ms/230VAC  
1200ms, 30ms/115VAC at full load  
18ms/115VAC at full load  
125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage)  
100ms/230VAC  
88 ~ 264VAC  
47 ~ 63Hz  
VOLTAGE RANGE  
FREQUENCY RANGE  
EFFICIENCY (Typ.)  
AC CURRENT (Typ.)  
INRUSH CURRENT (Typ.)  
74%  
77%  
81%  
82%  
84%  
84%  
INPUT  
2.5A/115VAC  
1.5A/230VAC  
COLD START 40A/230VAC  
<2mA / 240VAC  
LEAKAGE CURRENT  
110 ~ 150% rated output power  
OVER LOAD  
Protection type : Hiccup mode, recovers automatically after fault condition is removed  
3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V  
PROTECTION  
ENVIRONMENT  
27.6 ~ 32.4V  
55.2 ~ 64.8V  
OVER VOLTAGE  
Protection type : Hiccup mode, recovers automatically after fault condition is removed  
-25 ~ +70 (Refer to output load derating curve)  
20 ~ 90% RH non-condensing  
WORKING TEMP.  
WORKING HUMIDITY  
STORAGE TEMP., HUMIDITY  
TEMP. COEFFICIENT  
VIBRATION  
-40 ~ +85 , 10 ~ 95% RH  
0.03%/ (0 ~ 50  
)
10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes  
UL60950-1, TUV EN60950-1 Approved  
SAFETY STANDARDS  
WITHSTAND VOLTAGE  
ISOLATION RESISTANCE  
EMI CONDUCTION & RADIATION  
HARMONIC CURRENT  
EMS IMMUNITY  
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC  
SAFETY &  
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC  
Compliance to EN55022 (CISPR22) Class B  
Compliance to EN61000-3-2,-3  
EMC  
(Note 6)  
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2) heavy industry level, criteria A  
MTBF  
260.8Khrs min. MIL-HDBK-217F (25  
159*97*38mm (L*W*H)  
)
OTHERS  
NOTE  
DIMENSION  
0.6Kg; 24pcs/15.4Kg/0.7CUFT  
PACKING  
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.  
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.  
3. Tolerance : includes set up tolerance, line regulation and load regulation.  
4. Line regulation is measured from low line to high line at rated load.  
5. Load regulation is measured from 0% to 100% rated load.  
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets  
EMC directives.  
7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.  
File Name:RS-100-SPEC 2005-09-13  
100W Single Output Switching Power Supply  
RS-100 series  
Mechanical Specification  
Case No. 901C Unit:mm  
152.5  
1
2
3
4
5
6
7
4.5  
24  
78  
159  
150  
6.5  
22  
117  
Terminal Pin. No Assignment  
Pin No. Assignment Pin No.  
Assignment  
DC OUTPUT -V  
DC OUTPUT +V  
1
2
3
AC/L  
AC/N  
FG  
4,5  
6,7  
Output Derating  
Static Characteristics  
Ta=25  
100  
90  
100  
80  
Others  
80  
60  
70  
3.3V,5V  
60  
40  
50  
40  
20  
-25  
-25  
0
0
10  
20  
30  
40  
50  
60  
70 (VERTICAL)  
88 95 100 115 120 140 160 180 200 220 240 264  
AMBIENT TEMPERATURE (  
)
INPUT VOLTAGE (VAC) 60Hz  
File Name:RS-100-SPEC 2005-09-13  

相关型号：

RS-100-5

 100W Single Output Switching Power Supply
ASTRODYNE

RS-100-5

 100W Single Output Switching Power Supply
MEANWELL

RS-100-5

 100W Single Output Switching Power Supply
RSG

RS-100.105OHM+/-1%

 RESISTOR, WIRE WOUND, 10 W, 1 %, 90 ppm, 0.105 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY

RS-100.113OHM+/-1%

 RESISTOR, WIRE WOUND, 10 W, 1 %, 90 ppm, 0.113 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY

RS-100.115OHM+/-1%

 RESISTOR, WIRE WOUND, 10 W, 1 %, 90 ppm, 0.115 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY

RS-100.121OHM+/-1%

 RESISTOR, WIRE WOUND, 10 W, 1 %, 90 ppm, 0.121 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY

RS-100.1241%

 RESISTOR, WIRE WOUND, 10 W, 1 %, 90 ppm, 0.124 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY

RS-100.124OHM+/-1%

 RESISTOR, WIRE WOUND, 10 W, 1 %, 90 ppm, 0.124 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY

RS-100.125%

 RESISTOR, WIRE WOUND, 10 W, 5 %, 90 ppm, 0.12 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY

RS-100.127OHM1.0%

 RESISTOR, WIRE WOUND, 10 W, 1 %, 90 ppm, 0.127 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY

RS-100.12OHM5.0%

 RESISTOR, WIRE WOUND, 10 W, 5 %, 90 ppm, 0.12 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
©2020 ICPDF网 联系我们和版权申明