RS-15_11 [MEANWELL]

15W Single Output Switching Power Supply; 15W单路输出开关电源
RS-15_11
型号: RS-15_11
厂家: MEAN WELL ENTERPRISES CO., LTD.    MEAN WELL ENTERPRISES CO., LTD.
描述:

15W Single Output Switching Power Supply
15W单路输出开关电源

开关
文件: 总2页 (文件大小:258K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
15W Single Output Switching Power Supply  
RS-15 series  
Features :  
Universal AC input / Full range  
Protections: Short circuit / Overload / Over voltage / Over temperature  
Cooling by free air convection  
LED indicator for power on  
100% full load burn-in test  
No load power consumption<0.5W  
All using 105 long life electrolytic capacitors  
Withstand 300VAC surge input for 5 second  
High operating temperature up to 70  
Withstand 5G vibration test  
High efficiency, long life and high reliability  
3 years warranty  
..  
SPECIFICATION  
MODEL  
RS-15-3.3  
RS-15-5  
RS-15-12  
RS-15-15  
RS-15-24  
RS-15-48  
DC VOLTAGE  
3.3V  
3A  
5V  
12V  
15V  
24V  
48V  
RATED CURRENT  
CURRENT RANGE  
RATED POWER  
3A  
1.3A  
1A  
0.625A  
0 ~ 0.625A  
15W  
0.313A  
0 ~ 0.313A  
15.024W  
200mVp-p  
43.2 ~ 52.8V  
1.0%  
0 ~ 3A  
9.9W  
0 ~ 3A  
15W  
0 ~ 1.3A  
15.6W  
120mVp-p  
10.8 ~ 13.2V  
1.0%  
0 ~ 1A  
15W  
RIPPLE & NOISE (max.) Note.2 80mVp-p  
VOLTAGE ADJ. RANGE  
VOLTAGE TOLERANCE Note.3 3.0%  
LINE REGULATION Note.4 0.5%  
LOAD REGULATION Note.5 2.0%  
80mVp-p  
4.75 ~ 5.5V  
2.0%  
120mVp-p  
13.5 ~ 16.5V  
1.0%  
200mVp-p  
22 ~ 27.6V  
1.0%  
OUTPUT  
2.9 ~ 3.6V  
0.5%  
0.5%  
0.5%  
0.5%  
0.5%  
1.5%  
0.5%  
0.5%  
0.5%  
0.5%  
SETUP, RISE TIME  
1000ms, 30ms/230VAC  
1000ms, 30ms/115VAC at full load  
HOLD UP TIME (Typ.)  
VOLTAGE RANGE  
70ms/230VAC  
85 ~ 264VAC  
47 ~ 63Hz  
15ms/115VAC at full load  
120 ~ 370VDC  
FREQUENCY RANGE  
EFFICIENCY (Typ.)  
AC CURRENT (Typ.)  
INRUSH CURRENT (Typ.)  
LEAKAGE CURRENT  
72%  
77%  
81%  
81%  
82%  
82%  
INPUT  
0.35A/115VAC  
0.25A/230VAC  
COLD START 65A / 230VAC  
<2mA / 240VAC  
Above 105% rated output power  
OVERLOAD  
Protection type : Hiccup mode, recovers automatically after fault condition is removed  
3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V  
28.4 ~ 32.4V  
55.2 ~ 64.8V  
OVER VOLTAGE  
PROTECTION  
Protection type : Shut off o/p voltage, clamping by zener diode  
U1 Tj 140 typically (U1) detect on main control IC  
OVER TEMPERATURE  
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down  
-20 ~ +70 (Refer to "Derating Curve")  
WORKING TEMP.  
20 ~ 90% RH non-condensing  
WORKING HUMIDITY  
STORAGE TEMP., HUMIDITY  
TEMP. COEFFICIENT  
VIBRATION  
-40 ~ +85 , 10 ~ 95% RH  
ENVIRONMENT  
0.03%/ (0 ~ 50  
)
10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes  
UL60950-1, TUV EN60950-1 approved  
SAFETY STANDARDS  
WITHSTAND VOLTAGE  
ISOLATION RESISTANCE  
EMC EMISSION  
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC  
SAFETY &  
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH  
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3  
EMC  
(Note 6)  
Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, EN55024, EN61000-6-1, light industry level, criteria A  
EMC IMMUNITY  
MTBF  
1608.8Khrs min. MIL-HDBK-217F (25  
62.5*51*28mm (L*W*H)  
)
OTHERS  
NOTE  
DIMENSION  
PACKING  
0.13Kg; 108pcs/15Kg/0.71CUFT  
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.  
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.  
3. Tolerance : includes set up tolerance, line regulation and load regulation.  
4. Line regulation is measured from low line to high line at rated load.  
5. Load regulation is measured from 0% to 100% rated load.  
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets  
EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”  
(as available on http://www.meanwell.com)  
File Name:RS-15-SPEC 2011-12-06  
15W Single Output Switching Power Supply  
RS-15 series  
Mechanical Specification  
Case No.971A Unit:mm  
1
2
3
4
2-M3 L=3  
5
LED  
+V ADJ.  
39.1  
14.65  
62.5  
13 max.  
Terminal Pin No. Assignment  
Pin No. Assignment Pin No.  
Assignment  
DC OUTPUT -V  
DC OUTPUT +V  
2-M3 L=4  
1
2
3
AC/L  
AC/N  
FG  
4
5
39.1  
11.5  
Block Diagram  
fosc : 132KHz  
RECTIFIERS  
RECTIFIERS  
POWER  
+V  
-V  
EMI  
FILTER  
I/P  
&
&
SWITCHING  
FILTER  
FILTER  
PWM  
CONTROL  
DETECTION  
CIRCUIT  
FG  
Derating Curve  
Output Derating VS Input Voltage  
100  
90  
100  
80  
80  
60  
70  
60  
40  
50  
40  
20  
-20  
0
10  
20  
30  
40  
50  
60  
70  
(HORIZONTAL)  
85 95 100 115 120 140 160 180 200 220 240 264  
AMBIENT TEMPERATURE (  
)
INPUT VOLTAGE (VAC) 60Hz  
File Name:RS-15-SPEC 2011-12-06  

相关型号:

RS-170

Programmable Video Sync Generator
NSC

RS-180

Micro-size Surface Mountable Infrared Remote Control Receiver Unit
ETC

RS-1A-3000.178OHM0.5%E12

Fixed Resistor, Wire Wound, 1W, 0.178ohm, 0.5% +/-Tol, -90,90ppm/Cel,
VISHAY

RS-1A-3000.68OHM10%E70

Fixed Resistor, Wire Wound, 1W, 0.68ohm, 10% +/-Tol, -90,90ppm/Cel,
VISHAY

RS-1A-3001.67OHM0.5%B12

Fixed Resistor, Wire Wound, 1W, 1.67ohm, 0.5% +/-Tol, -50,50ppm/Cel,
VISHAY

RS-1A-3001.69KOHM1%B12

Fixed Resistor, Wire Wound, 1W, 1690ohm, 1% +/-Tol, -20,20ppm/Cel,
VISHAY

RS-1A-3001.78KOHM1%B12

Fixed Resistor, Wire Wound, 1W, 1780ohm, 1% +/-Tol, -20,20ppm/Cel,
VISHAY

RS-1A-3001.8KOHM0.5%E12

Fixed Resistor, Wire Wound, 1W, 1800ohm, 0.5% +/-Tol, -20,20ppm/Cel,
VISHAY

RS-1A-3001.96KOHM0.1%E12

Fixed Resistor, Wire Wound, 1W, 1960ohm, 0.1% +/-Tol, -20,20ppm/Cel,
VISHAY

RS-1A-300101OHM0.25%B12

Fixed Resistor, Wire Wound, 1W, 101ohm, 0.25% +/-Tol, -20,20ppm/Cel,
VISHAY

RS-1A-30018.4OHM0.5%B12

Fixed Resistor, Wire Wound, 1W, 18.4ohm, 0.5% +/-Tol, -20,20ppm/Cel,
VISHAY

RS-1A-30019.1OHM0.5%B12

Fixed Resistor, Wire Wound, 1W, 19.1ohm, 0.5% +/-Tol, -20,20ppm/Cel,
VISHAY