LS01-1B66-PA-500W [MEDER]
Level Sensors with Magnetic Floats; 液位传感器与磁性浮子
| 型号： | LS01-1B66-PA-500W |
| 厂家： | 
MEDER ELECTRONIC |
| 描述： | Level Sensors with Magnetic Floats |
| 文件： | 总3页 (文件大小：559K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LS02 Series
Level Sensors with
Magnetic Floats
MEDER electronic
DESCRIPTION
Standard liquid level sensor. The sensor has to be
mounted vertically for best results.
Two versions are available:
PP (Polypropylene) for water applications and
dilute acids
PA (Polyamide) for use in oil, gasoline (petrol) and
brake fluid
APPLICATIONS
The standard termination is a PVC cable with a
cross section of 0.14 mm2 and a length of 500 mm.
The cable can be modified on request.
• Liquid container monitoring in household ap-
pliances, automotive applications, test and
measurement, and control technology.
FEATURES
• High power switches available
• Other cables, connectors and colors available
• Form A (normally open) and Form B (normally
closed) types are available
• IP 68 (only to screw thread)
ORDER INFORMATION
Part Number Example
Cable
Length
(mm)
Contact
Form
Switch
Model
Series
Material
Termination
LS02 - 1A66 - PA - 500
W
LS02 -
XX
XX -
XX -
XXX
X
1A is the contact form
66 is the switch model
PA is the material
1 Form A
1 Form B
Options
66, 85
PA, PP
500 *
W
500 is the cable length (mm)
W is the termination
* Other cable lengths available.
TERMINATION
For wire and termination details please consult factory.
The cable cut length includes:
5 mm of wire stripped and tinned
W
www.meder.com
279
LS02 Series
MEDER electronic
Level Sensors with
Magnetic Floats
DIMENSIONS
SWITCHING STATUS
All dimensions in mm [inch]
Form A
Open
Form B
Closed
5 1
[0.196 0.0ꢀ4
M10x1.0
SW17
16.5±±.ꢀ
[0.6ꢀ9 0.01ꢁ4
Open
Closed
marking
19.±±±.25
[0.6ꢀ9 0.104
float
Lock washer
ø7
[ø±.276]
ø24±±.ꢀ
[ø±.945±±.±12]
MATERIALS
Materials PA version
Stem, nut
Float
Polyamide black
Polyamide black
Nitrile rubber
Seal
Materials PP version
Stem, nut
Float
Polypropylene white
Polypropylene white
Nitrile rubber
Seal
www.meder.com
280
MEDER electronic
LS02 Series
Level Sensors with
Magnetic Floats
CONTACT DATA
Switch Model →
Contact Form →
Switch 66
Form A
Switch 85
Form A / B
All Data at 20° C
Contact Ratings
Conditions
Min. Typ. Max. Min. Typ. Max. Units
Any DC combination of V & A not
to exceed their individual max.‘s
Switching Power
10
100
W
Switching Voltage
Switching Current
Carry Current
DC or peak AC
DC or peak AC
DC or peak AC
w/ 0.5 V & 10 mA
200
0.5
1000
1.0
V
A
1.25
150
2.5
A
Static Contact Resistance
150
mΩ
Measured w/ 0.5 V & 50 mA ,
1.5 ms after closure
Dynamic Contact Resistance
200
200
mΩ
Ω
Insulation Resistance across
Contacts
100 volts applied
1010*
225 *
1011
700
Breakdown Voltage across
Contact
Voltage applied for 60 sec. min.
VDC
Operation Time incl. Bounce Measured w/ 50 % overdrive
0.5
0.1
1.0
0.1
ms
ms
pF
Release Time
Measured w/ no coil suppression
at 10 kHz cross contact
Capacitance
0.2
0.7
Environmental Data
Shock Resistance
Vibration Resistance
Ambient Temperature
Stock Temperature
Soldering Temperature
1/2 sinus wave duration 11 ms
From 10 - 2000 Hz
50
20
50
20
g
g
10°C/ minute max. allowable
10°C/ minute max. allowable
5 sec. dwell
-20
-20
90
-20
-55
130
130
260
oC
oC
oC
100
260
Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive
switch.
*
Insulation resistance of 1012 and breakdown voltage of 480 VDC is available.
These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. Consult factory if
more detail is required.
www.meder.com
281
相关型号：
©2020 ICPDF网 联系我们和版权申明