MK17-E-3 [MEDER]
Reed Sensors for SMD Mounting; 干簧传感器用于SMD贴装型号: | MK17-E-3 |
厂家: | MEDER ELECTRONIC |
描述: | Reed Sensors for SMD Mounting |
文件: | 总4页 (文件大小:418K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MK17 Series
MEDER electronic
Reed Sensors for
SMD Mounting
DESCRIPTION
MK17 are magnetically operated Reed proximity
switches for SMD mounting.
• Lead design 1: Flat, straight leads for PCB
slot mounting.
• Lead design 2: Flat, bent SMD leads.
• Lead design 3: J-Lead.
The sensors are supplied taped & reeled according
to IEC 286/part 3 suitable for auto-placement.
The special features of this series are the small
dimensions of only 12.5 x 2.1 x 2.1mm and the
simple internal structure.
APPLICATIONS
• Electronic PCB’s where all components
are surface mounted
• Telecommunication applications
Hook switch in mobile and hard-wired phones
• Switching element in microphones
FEATURES
• Two operate sensitivities available
• Tape and Reel available
• Excellent for low power operations
• No external power required for sensor operation
• UL approved
DIMENSIONS
All dimensions in mm [inch]
Recommended
Pad Layout
www.meder.com
260
MEDER electronic
MK17 Series
Reed Sensors for
SMD Mounting
ORDER INFORMATION
Part Number Example
Magnetic
Sensitivity
Lead
Design
Series
MK17 -
Options
MK17 - B - 1
x -
x
B is the magnetic sensitivity
1 is the lead design
B, C, D, E
1, 2, 3
MAGNETIC SENSITIVITY
Sensitivity
class
Pull In
AT Range
B
C
D
E
10 - 15
15 - 20
20 - 25
25 - 30
TAPE & REEL
www.meder.com
261
MK17 Series
MEDER electronic
Reed Sensors for
SMD Mounting
SOLDERING INFORMATION
reflow soldering conditions according JEDEC norm J-STD-020C
40 s
260 o
C
183 o
C
125 o
C
Ramp up:
max. 6K/s
Ramp down:
max. 8/Ks
120 s
120-180 s
www.meder.com
262
MEDER electronic
MK17 Series
Reed Sensors for
SMD Mounting
CONTACT DATA
All Data at 20° C
Contact Ratings
Switching Power
Contact Form →
Form A
Min. Typ. Max. Units
Conditions
Any DC combination of V & A not to
exceed their individual max.‘s
10
W
Switching Voltage
Switching Current
Carry Current
DC or peak AC
DC or peak AC
DC or peak AC
w/ 0.5 V & 10 mA
100
0.5
0.5
200
V
A
A
Static Contact Resistance
mΩ
Measured w/ 0.5 V & 50 mA ,
1.5 ms after closure
Dynamic Contact Resistance
250
mΩ
Ω
Insulation Resistance across Contacts 100 volts applied
109
210
Breakdown Voltage across Contact
Voltage applied for 60 sec. min.
VDC
Operate Time incl. Bounce
Release Time
Measured w/ 100 % overdrive
Measured w/ no coil suppression
at 10 kHz cross contact
0.6
0.1
ms
ms
pF
Capacitance
0.2
Contact Operation *
Must Operate Condition
Must Release Condition
Environmental Data
Shock Resistance
Steady state field
Steady state field
10
4
30
18
AT
AT
1/2 sinus wave duration 11 ms
From 10 - 2000 Hz
30
20
g
Vibration Resistance
Ambient Temperature
Stock Temperature
g
10°C/ minute max. allowable
10°C/ minute max. allowable
5 sec. dwell
-40
-50
130
130
260
oC
oC
oC
Soldering Temperature
Please note: The indicated electrical data are maximum values and can vary downwards when using a more
sensitive switch.
* These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. Consult factory if
more detail is required.
www.meder.com
263
相关型号:
©2020 ICPDF网 联系我们和版权申明