OC31T12S-100.000-0.01/0+60 [MERCURY]

Oscillator;
OC31T12S-100.000-0.01/0+60
型号: OC31T12S-100.000-0.01/0+60
厂家: MERCURY UNITED ELECTRONICS INC    MERCURY UNITED ELECTRONICS INC
描述:

Oscillator

文件: 总2页 (文件大小:161K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
OCXO (Oven Controlled Crystal Oscillators)  
OC31T Series HCMOS Square Wave  
+5.0V; +12V  
MERCURY  
Since 1973  
Mercury OC31T is 36.2x27.2 mm 5 pin solder sealed metal pacakge  
with 25.4x17.8 mm pin-to-pin spacing high stability low aging OCXO.  
Besides standard AT cut crystal, users can also choose SC cut crystal  
for better performance. 50 ohm load sine output is available as OC31E series.  
OC30T series: Same package size as OC31T but with different pin configurations.  
General Specifications ( 10 MHz at+25°C, at specified Vcc and +2.5 V Vcon)  
Output Wave Form  
Frequency Range  
HCMOS square wave. Wave form code is “T”  
1.25 MHz ~100.0 MHz  
AT-cut. Use “A” for crystal code or SC-cut: use “S” for crystal code.  
Type of Crystal Cut Used  
SC has better performance but higher cost. See technical note TN-031.  
+5.0 VD.C ±5% (voltage code is “5”); +12.0 V D.C ±5% (voltage code is “12”)  
±0.5 ppm max. at time of shipment; Vcon=+2.5V, at +25°C  
Supply Voltage (Vcc)  
Initial Calibration Tolerance  
Best Stability  
For AT crystal  
For SC crystal  
0°C to +60°C  
±0.03 ppm  
±0.01 ppm  
-20°C to +70°C  
±0.08 ppm  
±0.02 ppm  
-40°C to +85°C  
±0.2 ppm  
±0.03 ppm  
Operating Temperature Range  
(custom spec. on request)  
Aging (after 72 hours of  
continuous operation)  
AT:±3 ppb max./day; ±0.5 ppm max./first year;±3 ppm max. over 10 years.  
SC: ±2 ppb max./day; ±0.1 ppm max./first year;±0.5 ppm max. over 10 years.  
Supply Voltage ±5% Variation ±20 ppb max.  
Load ±5% variation:  
±20 ppb max.  
AT: 3 minutes max. Within ±0.5 ppm of its reference frequency.  
SC: 1 minute max. Within ±0.1 ppm of its reference frequency.  
Warm-up time (at +25°C)  
AT: ±5 ppm min. ±20 ppm max.;  
SC: ±0.5 ppm min, ±2 ppm max.  
Referenced to fo at +25°C and over  
operating temperature range.  
Freq. Deviation Range  
Control Voltage Range  
Transfer Function  
Input Impedance  
2.5 V ± 2.0 V  
Positive: Increasing control voltage increases output frequency.  
EFC Linearity  
100 K ohms min. ±10% max.  
+5.0 V units: 200 mA max. at steady-state; 500 mA max. at turn-on.  
+12.0 V units: 120 mA max. at steady-state; 250 mA max. at turn-on.  
Power  
Output  
Power Dissipation (at +25°C)  
Load (Fan out)  
15 pF HCMOS max.  
+4.5 V min.  
Duty Cycle (measured at 50%Vcc) 50% ± 10%  
+0.5 max.  
Output Voltage Logic High (VOH)  
Rise and Fall Time  
Reference Voltage Output  
Offset  
Output Voltage Logic Low (VOL)  
5 nS max. (measured at 20% 80% of waveform)  
+4.0 VD.C±0.3 V D.C. or custom.  
1 Hz  
10 Hz  
100 Hz  
1 KHz  
10 KHz  
Phase  
Noise  
10 MHz AT-cut XTAL  
-75 dBc  
-85 dBc  
-100 dBc  
-120 dBc  
-130 dBc  
-140 dBc  
-140 dBc  
-145 dBc  
-150 dBc  
-150 dBc  
10 MHz SC-cut XTAL  
Storage Temperature  
Shock  
-55°C to +125°C  
2000 G’s, 0.3 ms ½ sine  
10 to 2000 Hz / 10 G’s  
Vibration  
MERCURY  
www.mercury-crystal.com  
Taiwan: TEL (886)-2-2406-2779, FAX (886)-2-2496-0769, e-mail: sales-tw@mercury-crystal.com  
U.S.A.: TEL (1)-909-466-0427, FAX (1)-909-466-0762, e-mail: sales-us@mercury-crystal.com  
MERCURY  
Page 1 of 2  
Date: July 20, 2006  
Rev. 0  
OCXO (Oven Controlled Crystal Oscillators)  
+5.0V; +12V  
MERCURY  
Since 1973  
OC31T Series  
HCMOS Square Wave  
OC31T Test Circuit  
Bottom view  
T2  
Frequency counter  
Oscilloscope  
T1  
A
80%  
50%  
20%  
+
-
+
0.1uF  
Vcc  
V
-
*
15 pF  
+
Vcon  
T1  
-
Tr  
* Include probe, fixture and stray capacitances  
Tf  
Duty Cycle =  
*100%  
T2  
OC31T Series Package Dimensions and Pin Connections:  
unit mm  
Pin 3: Supply Voltage  
Pin 1: Voltage Control EFC  
Pin 4: RF Output  
Pin 2: Reference Voltage Output  
Pin 5: Ground / Case  
Part Number Format and Example:  
Example: OC31T5S-10.000-0.01/-20+70  
OC 31  
n o  
T
5
S
r
dash  
10.000  
s
dash  
0.01  
t
-20+70  
u
slash  
p q  
n: OC” Product Prefix for OCXO  
o: Package type. “31” for OC31 package  
p: Output wave form code. T” for HCMOS square wave output..  
q: Supply voltage code. “5” for +5.0V; “12” for +12.0V  
r: Crystal type. Use “A” for AT-cut crystal; Use “S” for SC-cut crystal.  
s: Frequency in MHz;  
t: Frequency stability in ppm;  
u: Operating temperature range: -20°C to +70°C in this case.  
MERCURY  
Page 2 of 2  
Date: July 20, 2006  
Rev. 0  

相关型号:

EUROQUARTZ

OC31T12S-FREQ-0.01/0+60

HCMOS Output Clock Oscillator, 1.25MHz Min, 100MHz Max, METAL PACKAGE-5
EUROQUARTZ

OC31T12S-FREQ-0.03/-40+85

HCMOS Output Clock Oscillator, 1.25MHz Min, 100MHz Max, METAL PACKAGE-5
EUROQUARTZ

OC31T5A

AT-Cut Crystal - Square Wave - 5.0 Volts
EUROQUARTZ
EUROQUARTZ
MERCURY
EUROQUARTZ
EUROQUARTZ

OC31T5A-10.000-0.08-20

AT-Cut Crystal - Square Wave - 5.0 Volts
EUROQUARTZ
EUROQUARTZ