RD16CG511J101 [MERITEK]
Ceramic Capacitor, Ceramic, 100V, 5% +Tol, 5% -Tol, NP0, -/+30ppm/Cel TC, 0.00051uF,;型号: | RD16CG511J101 |
厂家: | MERITEK ELECTRONICS CORPORATION |
描述: | Ceramic Capacitor, Ceramic, 100V, 5% +Tol, 5% -Tol, NP0, -/+30ppm/Cel TC, 0.00051uF, |
文件: | 总2页 (文件大小:124K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Radial Leaded, Epoxy Dipped,
Multilayer Ceramic Capacitors
RD Series
MERITEK
MERITEK Radial Leaded, Epoxy Dipped Multilayer Ceramic
Capacitors are constructed with a moisture and shock resistant
epoxy coating, and can be supplied in bulk or tape and reel
packaging for automatic insertion in printed circuit boards. They
have a wide range of applications in computers, data processors,
telecommunication, industrial controls and instrumentation
equipment, etc.
PART NUMBERING SYSTEM
RD
15
YV 104
Z
500
RR
Meritek Series
Size
Dielectric
CODE
CG
NPO
XR
X7R
YV
Y5V
Capacitance Code
CODE
(pF)
101
223
22000
0.022
104
100000
0.1
100
(μF)
----
Tolerance
CODE
J
K
M
Z
± 5%
±10%
±±0%
+80% to –±0%
Rated Voltage
CODE
500
50V
101
100V
±01
±00V
Packaging
CODE
Blank
Bulk
RR
Radial Leaded, Reel Package
Size Code and Dimensions in mm (inches)
RD20
Lead Spacing
RD15
4.06
(.160)max.
5.08
(.200)max.
2.5 + 0.8
(.10 + 0.032)
3.81(.150)
5.08(.200)
max
max
1.50(.060)
1.50(.060)
max.
max.
25.4(1.00)
25.4(1.00)
max
max
RD16
RD21
4.06
5.08
(.160)max.
(.200)max.
5.0 + 0.8
(.20 + 0.032)
3.81max.
(.150)
5.08max.
(.200)
7.60(.300)
7.60(.300)
max.
max.
25.4(1.00)
25.4(1.00)
max
max
RD30
7.60
(.300)max.
Lead length can be cut upon customer's request.
5.0 + 0.8
(.20 + 0.032)
7.60(.300)
Standard cut lead lengths are: 3.3 + 0.8(.13 + .03)
6.0 + 1.0(.24 + .04)
max.
1.50(.060)
10.0 + 2.0(.39 + .08)
max.
25.4(1.00)
max
Special lead styles available upon request.
Specifications are subject to change without notice.
rev.6a
Radial Leaded, Epoxy Dipped
Multilayer Ceramic Capacitors
RD Series
MERITEK
PERFORMANCE SPECIFICATIONS
1.ELECTRICAL
DIELECTRIC
EIA
NPO
X7R
Y5V
CODE
Temperature Characteristic
0 ± ±0ppm ꢀoC, C > 20pF
ppm ꢀ oC, C <
C ± 1ꢁ5 maꢂimum
Over -ꢁꢁoC to +12ꢁoC
C ± 225ꢀ-825 maꢂimum
Over -±0 oC to +8ꢁ o
C
+120ꢀ
0
20pF
-40
Operating Temperature Range
-ꢁꢁ oC to + 12ꢁ o
C
-ꢁꢁ oC to +12ꢁ o
1 KHz, 1 Vrms
C
-±0 oC to +8ꢁ o
C
Measuring Conditions for
Capacitance and D.F.
1 MHz, 1 Vrms, C < 1000pF
< 0.15
1 KHz, 0.ꢁ Vrms
Dissipation Factor (D.F.)
and Tangent of Loss
< 2.ꢁ5
< ꢁ.05
Angle (tan
)
Insulation Resistance (I.R.)
after 60 secs, charging at
rated
> 100G ohms or > 1000MμF
> 100G ohms or > 1000MμF
> 10G ohms or > 1000MμF
Whichever is less
Whichever is less
Whichever is less
voltage, 2ꢁoC, ꢁꢁ5 RH maꢂ.
Voltage Proof 2ꢁoC, 1-ꢁ secs
Capacitance Aging
2.ꢁ ꢂ Rated Voltage
0
2.ꢁ ꢂ Rated Voltage
2.ꢁ ꢂ Rated Voltage
75 per decade hour
2.ꢁ5 per decade hour
2.ENVIROMENTAL
Test
Test Condition
Post-Test Inspection Requirements
Solderability
Solder 60Snꢀ40Pb, 2±ꢁ ±ꢁoC
At least 9ꢁ5 of leads should be well tinned
Immersion 2 ± 0.ꢁ sec.
Depth of Immersion: 1.ꢁ – 2.0mm
ꢃo visible damage.
Resistance to
Soldering Heat
Immersion in solder bath at 260 ±ꢁoC for 10 ± 1 sec.
ꢃPO
ꢄ7R
ꢅꢁV
Recovery: 24 ± 2 hrs. (ꢃPO)
48 ± 4 hrs. (ꢄ7R, ꢅꢁV)
C ꢀ oC
±ꢁ5
± 105
± 205
<
Rapid Change
Of Temperature
-ꢁꢁ to +12ꢁoC
)
ꢃo visible damage
ꢃo visible damage
(ꢃPO. ꢄ7R
-2ꢁ TO +8ꢁoC (ꢅꢁV)
ꢁ cycles, duration : ±0 mins.
Recovery: 24 ± 2 hrs. (ꢃPO)
48 ± 4 hrs. (ꢄ7R, ꢅꢁV)
Endurance
1000 hrs. at maꢂimum temperature with 1.ꢁ ꢂ rated
voltage applied
ꢃPO
< ±25
ꢄ7R
ꢅꢁV
Cꢀo
DF
IR
C
< ±205
<ꢁ5
< ±±05
< 105
Recovery: 24 ± 2 hrs. (ꢃPO)
48 ± 4 hrs. (ꢄ7R, ꢅꢁV)
<
0.±5
R.C>2ꢁS
3.Capacitance Range
SIZE
NPO
Y5V
X7R
RD15, RD16
1000pF to 0.1μF
0.1μF to 1.0μF
10pF to 1000pF
8200pF to 0.1μF
0.15μF to 1μF
RD20, RD21
相关型号:
RD16CG821J201RR
Ceramic Capacitor, Multilayer, Ceramic, 200V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.00082uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
MERITEK
RD16CG821K101
Ceramic Capacitor, Multilayer, Ceramic, 100V, 10% +Tol, 10% -Tol, C0G, 30ppm/Cel TC, 0.00082uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
MERITEK
©2020 ICPDF网 联系我们和版权申明