27C128-15I/SO [MICROCHIP]
x8 EPROM ; X8 EPROM\n型号: | 27C128-15I/SO |
厂家: | MICROCHIP |
描述: | x8 EPROM
|
文件: | 总12页 (文件大小:65K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
27C128
128K (16K x 8) CMOS EPROM
FEATURES
PACKAGE TYPES
DIP/SOIC
• High speed performance
- 120 ns access time available
VPP
A12
A7
A6
A5
A4
A3
A2
A1
A0
O0
O1
O2
VSS
• 1
2
28 VCC
27 PGM
26 A13
25 A8
24 A9
23 A11
22 OE
21 A10
20 CE
19 O7
18 O6
17 O5
16 O4
15 O3
• CMOS Technology for low power consumption
- 20 mA Active current
3
4
5
- 100 µA Standby current
6
• Factory programming available
• Auto-insertion-compatible plastic packages
• Auto ID aids automated programming
• Separate chip enable and output enable controls
• High speed “express” programming algorithm
• Organized 16K x 8: JEDEC standard pinouts
- 28-pin Dual-in-line package
7
8
9
10
11
12
13
14
- 32-pin PLCC Package
- 28-pin SOIC package
PLCC
- Tape and reel
• Available for the following temperature ranges:
- Commercial:
- Industrial:
0˚C to +70˚C
5
29
A6
A5
A4
A3
A2
A1
A0
NC
O0
A8
A9
A11
NC
OE
A10
CE
O7
6
28
27
26
25
24
23
22
21
-40˚C to +85˚C
-40˚C to +125˚C
7
- Automotive:
8
9
10
11
12
13
DESCRIPTION
The Microchip Technology Inc. 27C128 is a CMOS
128K bit (electrically) Programmable Read Only Mem-
ory. The device is organized as 16K words by 8 bits
(16K bytes). Accessing individual bytes from an
address transition or from power-up (chip enable pin
going low) is accomplished in less than 120 ns. CMOS
design and processing enables this part to be used in
systems where reduced power consumption and high
reliability are requirements.A complete family of pack-
ages is offered to provide the most flexibility in applica-
tions. For surface mount applications, PLCC, SOIC, or
TSOP packaging is available. Tape and reel packaging
is also available for PLCC or SOIC packages. UV eras-
able versions are also available.
O6
A complete family of packages is offered to provide the
most flexibility in applications. For surface mount appli-
cations, PLCC or SOIC packaging is available. Tape
and reel packaging is also available for PLCC or SOIC
packages.
1996 Microchip Technology Inc.
DS11003K-page 1
27C128
TABLE 1-1:
Name
PIN FUNCTION TABLE
Function
1.0
ELECTRICAL CHARACTERISTICS
1.1
Maximum Ratings*
VCC and input voltages w.r.t. VSS........-0.6V to +7.25V
A0-A13
CE
Address Inputs
Chip Enable
VPP voltage w.r.t. VSS during
programming ..........................................-0.6V to +14V
OE
Output Enable
Program Enable
Programming Voltage
Data Output
Voltage on A9 w.r.t. VSS ......................-0.6V to +13.5V
Output voltage w.r.t. VSS ............... -0.6V to VCC +1.0V
Storage temperature .......................... -65˚C to +150˚C
Ambient temp. with power applied ..... -65˚C to +125˚C
PGM
VPP
O0 - O7
VCC
*Notice: Stresses above those listed under “Maximum Ratings”
may cause permanent damage to the device. This is a stress rat-
ing only and functional operation of the device at those or any
other conditions above those indicated in the operation listings of
this specification is not implied. Exposure to maximum rating con-
ditions for extended periods may affect device reliability.
+5V Power Supply
Ground
VSS
NC
No Connection; No Internal Connec-
tions
NU
Not Used; No External Connection Is
Allowed
TABLE 1-2:
READ OPERATION DC CHARACTERISTICS
VCC = +5V (±10%)
Commercial:
Industrial:
Tamb = 0˚C to +70˚C
Tamb = -40˚C to +85˚C
Tamb = -40°C to +125°C
Extended (Automotive):
Parameter
Part*
Status
Symbol
Min.
Max. Units
Conditions
Input Voltages
all
Logic "1"
Logic "0"
VIH
VIL
2.0
-0.5
VCC+1
0.8
V
V
Input Leakage
all
all
—
ILI
-10
2.4
10
µA VIN = 0 to VCC
Output Voltages
Logic "1"
Logic "0"
VOH
VOL
V
V
IOH = -400 µA
IOL = 2.1 mA
0.45
10
6
Output Leakage
all
all
—
—
ILO
-10
—
µA VOUT = 0V to VCC
Input Capacitance
CIN
pF VIN = 0V; Tamb = 25°C;
f = 1 MHz
Output Capacitance
all
—
COUT
—
12
pF VOUT = 0V; Tamb = 25°C;
f = 1 MHz
Power Supply Current,
Active
C
I,E
TTL input
TTL input
ICC1
ICC2
—
—
20
25
mA VCC = 5.5V; VPP = VCC
mA f = 1 MHz;
OE = CE = VIL;
IOUT = 0 mA;
VIL = -0.1 to 0.8V;
VIH = 2.0 to VCC;
Note 1
Power Supply Current,
Standby
C
I, E
all
TTL input
TTL input
CMOS input
ICC(S)
—
—
—
2
3
100
mA
mA
µA CE = VCC ± 0.2V
IPP Read Current
VPP Read Voltage
all
all
Read Mode
Read Mode
IPP
VPP
100
µA VPP = 5.5V
V
VCC-0.7 VCC
* Parts: C=Commercial Temperature Range; I, E=Industrial and Extended Temperature Ranges
Note 1: Typical active current increases .75 mA per MHz up to operating frequency for all temperature ranges.
DS11003K-page 2
1996 Microchip Technology Inc.
27C128
TABLE 1-3:
READ OPERATION AC CHARACTERISTICS
AC Testing Waveform:
Output Load:
VIH = 2.4V and VIL = 0.45V; VOH = 2.0V VOL = 0.8V
1 TTL Load + 100 pF
Input Rise and Fall Times: 10 ns
Ambient Temperature: Commercial:
Industrial:
Extended (Automotive): Tamb = -40°C to +125°C
Tamb = 0˚C to +70˚C
Tamb = -40˚C to +85˚C
27C128-12 27C128-15 27C128-17 27C128-20 27C128-25
Min Max Min Max Min Max Min Max Min Max
Parameter
Sym
Units Conditions
Address to Output Delay tACC
—
—
—
0
120
120
65
—
—
—
0
150
150
70
—
—
—
0
170
170
70
—
—
—
0
200
200
75
—
—
—
0
250
250
100
60
ns CE=OE=VIL
ns OE=VIL
ns CE=VIL
ns
CE to Output Delay
OE to Output Delay
tCE
tOE
CE or OE to O/P High
Impedance
tOFF
50
50
50
55
Output Hold from
tOH
0
—
0
—
0
—
0
—
0
—
ns
Address CE or OE,
whichever occurs first
FIGURE 1-1: READ WAVEFORMS
VIH
Address Valid
Address
VIL
VIH
CE
VIL
tCE(2)
VIH
OE
VIL
tOFF(1,3)
tOH
tOE(2)
VOH
Outputs
O0 - O7
High Z
High Z
Valid Output
VOL
tACC
Notes: (1) tOFF is specified for OE or CE, whichever occurs first
(2) OE may be delayed up to tCE - tOE after the falling edge of CE without impact on tCE
(3) This parameter is sampled and is not 100% tested.
1996 Microchip Technology Inc.
DS11003K-page 3
27C128
TABLE 1-4:
PROGRAMMING DC CHARACTERISTICS
Ambient Temperature: Tamb = 25°C ± 5°C
VCC = 6.5V ± 0.25V, VPP = 13.0V ± 0.25V
Parameter
Status
Symbol
Min
Max.
Units
Conditions
Input Voltages
Logic”1”
Logic”0”
VIH
VIL
2.0
-0.1
VCC+1
0.8
V
V
Input Leakage
—
ILI
-10
2.4
10
µA
VIN = 0V to VCC
Output Voltages
Logic”1”
Logic”0”
VOH
VOL
V
V
IOH = -400 µA
IOL = 2.1 mA
0.45
20
VCC Current, program & verify
VPP Current, program
—
—
—
ICC2
IPP2
VH
—
—
mA
mA
V
Note 1
Note 1
25
A9 Product Identification
11.5
12.5
Note 1: VCC must be applied simultaneously or before VPP and removed simultaneously or after VPP
TABLE 1-5:
PROGRAMMING AC CHARACTERISTICS
for Program, Program Verify
and Program Inhibit Modes
AC Testing Waveform: VIH=2.4V and VIL=0.45V; VOH=2.0V; VOL=0.8V
Ambient Temperature: Tamb=25°C± 5°C
VCC= 6.5V ± 0.25V, VPP = VH = 13.0V ± 0.25V
Parameter
Symbol
Min
Max Units
Remarks
Address Set-Up Time
Data Set-Up Time
Data Hold Time
tAS
tDS
2
2
—
—
µs
µs
µs
µs
ns
µs
µs
µs
µs
µs
ns
tDH
2
—
Address Hold Time
Float Delay (2)
tAH
0
—
tDF
0
130
—
VCC Set-Up Time
Program Pulse Width (1)
CE Set-Up Time
tVCS
tPW
tCES
tOES
tVPS
tOE
2
95
2
105
—
100 µs typical
OE Set-Up Time
2
—
VPP Set-Up Time
Data Valid from OE
2
—
—
100
Note 1: For express algorithm, initial programming width tolerance is 100 µs ±5%.
2: This parameter is only sampled and not 100% tested. Output float is defined as the point where data is no
longer driven (see timing diagram).
DS11003K-page 4
1996 Microchip Technology Inc.
27C128
FIGURE 1-2: PROGRAMMING WAVEFORMS (1)
Program
Verify
VIH
Address
Data
Address Stable
VIL
V IH
VIL
tAS
t DS
tAH
High Z
Data In Stable
Data Out Valid
tDF
(2)
t DH
13.0 V (3)
5.0 V
6.5 V (3)
5.0 V
VIH
VPP
VCC
CE
tVPS
tVCS
VIL
tCES
V IH
PGM
OE
VIL
tOES
tPW
tOE
(2)
V IH
tOPW
VIL
Notes: (1)
The input timing reference is 0.8V for VIL and 2.0V for VIH.
(2)
(3)
tDF and tOE are characteristics of the device but must be accommodated by the programmer.
Vcc = 6.5V ±0.25V, VPP = VH = 13.0V ±0.25V for Express algorithm.
TABLE 1-6:
MODES
Operation Mode
Read
CE
OE
PGM
VPP
A9
O0 - O7
VIL
VIL
VIL
VIH
VIH
VIL
VIL
VIL
VIH
VIL
X
VIH
VIL
VIH
X
VCC
VH
X
X
DOUT
DIN
Program
Program Verify
Program Inhibit
Standby
VH
X
DOUT
VH
X
High Z
X
X
VCC
VCC
VCC
X
High Z
Output Disable
Identity
VIH
VIL
VIH
VIH
X
High Z
VH
Identity Code
X = Don’t Care
For Read operations, if the addresses are stable, the
address access time (tACC) is equal to the delay from
CE to output (tCE). Data is transferred to the output
after a delay from the falling edge of OE (tOE).
1.2
Read Mode
(See Timing Diagrams and AC Characteristics)
Read Mode is accessed when
a) the CE pin is low to power up (enable) the chip
b) the OE pin is low to gate the data to the output
pins
1996 Microchip Technology Inc.
DS11003K-page 5
27C128
1.3
Standby Mode
1.7
Verify
The standby mode is defined when the CE pin is high
(VIH) and a program mode is not defined.
After the array has been programmed it must be veri-
fied to ensure all the bits have been correctly pro-
grammed. This mode is entered when all the following
conditions are met:
When these conditions are met, the supply current will
drop from 20 mA to 100 µA.
a) VCC is at the proper level,
b) VPP is at the proper VH level,
c) the CE line is low,
1.4
Output Enable
This feature eliminates bus contention in microproces-
sor-based systems in which multiple devices may drive
the bus. The outputs go into a high impedance state
when the following condition is true:
d) the PGM line is high, and
e) the OE line is low.
1.8
Inhibit
• The OE and PGM pins are both high.
When programming multiple devices in parallel with dif-
ferent data, only CE or PGM need be under separate
control to each device. By pulsing the CE or PGM line
low on a particular device in conjunction with the PGM
or CE line low, that device will be programmed; all other
devices with CE or PGM held high will not be pro-
grammed with the data, although address and data will
be available on their input pins (i.e., when a high level
is present on CE or PGM); and the device is inhibited
from programming.
1.5
Erase Mode (U.V. Windowed Versions)
Windowed products offer the capability to erase the
memory array. The memory matrix is erased to the all
1’s state when exposed to ultraviolet light. To ensure
2
complete erasure, a dose of 15 watt-second/cm is
required. This means that the device window must be
placed within one inch and directly underneath an ultra-
violet lamp with a wavelength of 2537 Angstroms,
2
intensity of 12,000µW/cm for approximately 20 min-
utes.
1.9
Identity Mode
1.6
Programming Mode
In this mode specific data is output which identifies the
manufacturer as Microchip Technology Inc. and device
type. This mode is entered when Pin A9 is taken to VH
(11.5V to 12.5V). The CE and OE lines must be at VIL.
A0 is used to access any of the two non-erasable bytes
whose data appears on O0 through O7.
The Express Algorithm has been developed to improve
the programming throughput times in a production
environment. Up to ten 100-microsecond pulses are
applied until the byte is verified. No overprogramming
is required. A flowchart of the express algorithm is
shown in Figure 1-3.
Programming takes place when:
Pin
Identity
Input
A0
Output
a) VCC is brought to the proper voltage,
b) VPP is brought to the proper VH level,
c) the CE pin is low,
H
e
x
0 O O O O O O O
7
6
5
4
3
2
1
0
d) the OE pin is high, and
Manufacturer
Device Type*
VIL
VIH
0
1
0
0
1
0
0
0
1
0
0
0
0
1
1
1
29
83
e) the PGM pin is low.
Since the erased state is “1” in the array, programming
of “0” is required. The address to be programmed is set
via pins A0-A13 and the data to be programmed is pre-
sented to pins O0-O7. When data and address are sta-
ble, OE is high, CE is low and a low-going pulse on the
PGM line programs that location.
* Code subject to change
DS11003K-page 6
1996 Microchip Technology Inc.
27C128
FIGURE 1-3: PROGRAMMING EXPRESS ALGORITHM
Conditions:
Tamb = 25˚C ±5˚C
VCC = 6.5 ±0.25V
VPP = 13.0 ±0.25V
Start
ADDR = First Location
VCC = 6.5V
VPP = 13.0V
X = 0
Program one 100 µs pulse
Increment X
Verify
Byte
Pass
Fail
No
Yes
Device
Failed
X = 10 ?
Last
Address?
Yes
No
Increment Address
VCC = VPP = 4.5V, 5.5V
All
Yes
No
bytes
= original
data?
Device
Passed
Device
Failed
1996 Microchip Technology Inc.
DS11003K-page 7
27C128
NOTES:
DS11003K-page 8
1996 Microchip Technology Inc.
27C128
NOTES:
1996 Microchip Technology Inc.
DS11003K-page 9
27C128
NOTES:
DS11003K-page 10
1996 Microchip Technology Inc.
27C128
27C128 Product Identification System
To order or to obtain information, e.g., on pricing or delivery, please use the listed part numbers, and refer to the factory or the listed
sales offices.
27C128 –25
I
/P
Package:
L = Plastic Leaded Chip Carrier (PLCC)
P = Plastic DIP (600 Mil)
SO = Plastic SOIC (300 Mil)
Temperature
Range:
Blank = 0˚C to +70˚C
I = -40˚C to +85˚C
E = -40˚C to +125˚C
Access
Time:
12 = 120 ns
15 = 150 ns
17 = 170 ns
20 = 200 ns
25 = 250 ns
Device:
27C128
128K (16K x 8) CMOS EPROM
1996 Microchip Technology Inc.
DS11003K-page 11
WORLDWIDE SALES & SERVICE
AMERICAS
Corporate Office
ASIA/PACIFIC
China
EUROPE
United Kingdom
Microchip Technology Inc.
Microchip Technology
Arizona Microchip Technology Ltd.
Unit 6, The Courtyard
Meadow Bank, Furlong Road
Bourne End, Buckinghamshire SL8 5AJ
Tel: 44 1628 850303 Fax: 44 1628 850178
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 602 786-7200 Fax: 602 786-7277
Technical Support: 602 786-7627
Web: http://www.microchip.com
Unit 406 of Shanghai Golden Bridge Bldg.
2077 Yan’an Road West, Hongiao District
Shanghai, Peoples Republic of China
Tel: 86 21 6275 5700
Fax: 011 86 21 6275 5060
Hong Kong
Microchip Technology
RM 3801B, Tower Two
Metroplaza
223 Hing Fong Road
Kwai Fong, N.T. Hong Kong
Tel: 852 2 401 1200 Fax: 852 2 401 3431
India
Microchip Technology
No. 6, Legacy, Convent Road
Bangalore 560 025 India
Tel: 91 80 526 3148 Fax: 91 80 559 9840
France
Atlanta
Arizona Microchip Technology SARL
Zone Industrielle de la Bonde
2 Rue du Buisson aux Fraises
91300 Massy - France
Tel: 33 1 69 53 63 20 Fax: 33 1 69 30 90 79
Germany
Arizona Microchip Technology GmbH
Gustav-Heinemann-Ring 125
D-81739 Muenchen, Germany
Tel: 49 89 627 144 0 Fax: 49 89 627 144 44
Microchip Technology Inc.
500 Sugar Mill Road, Suite 200B
Atlanta, GA 30350
Tel: 770 640-0034 Fax: 770 640-0307
Boston
Microchip Technology Inc.
5 Mount Royal Avenue
Marlborough, MA 01752
Tel: 508 480-9990 Fax: 508 480-8575
Chicago
Italy
Microchip Technology Inc.
333 Pierce Road, Suite 180
Itasca, IL 60143
Tel: 708 285-0071 Fax: 708 285-0075
Dallas
Microchip Technology Inc.
14651 Dallas Parkway, Suite 816
Dallas, TX 75240-8809
Tel: 972 991-7177 Fax: 972 991-8588
Dayton
Microchip Technology Inc.
Suite 150
Arizona Microchip Technology SRL
Centro Direzionale Colleone Pas Taurus 1
Viale Colleoni 1
20041 Agrate Brianza
Milan Italy
Korea
Microchip Technology
168-1, Youngbo Bldg. 3 Floor
Samsung-Dong, Kangnam-Ku,
Seoul, Korea
Tel: 82 2 554 7200 Fax: 82 2 558 5934
Singapore
Microchip Technology
200 Middle Road
#10-03 Prime Centre
Singapore 188980
Tel: 65 334 8870 Fax: 65 334 8850
Taiwan, R.O.C
Microchip Technology
10F-1C 207
Tung Hua North Road
Taipei, Taiwan, ROC
Tel: 886 2 717 7175 Fax: 886 2 545 0139
Tel: 39 39 6899939 Fax: 39 39 689 9883
JAPAN
Microchip Technology Intl. Inc.
Benex S-1 6F
3-18-20, Shin Yokohama
Kohoku-Ku, Yokohama
Kanagawa 222 Japan
Two Prestige Place
Miamisburg, OH 45342
Tel: 513 291-1654 Fax: 513 291-9175
Tel: 81 45 471 6166 Fax: 81 45 471 6122
9/3/96
Los Angeles
Microchip Technology Inc.
18201 Von Karman, Suite 1090
Irvine, CA 92612
Tel: 714 263-1888 Fax: 714 263-1338
NewYork
Microchip Technmgy Inc.
150 Motor Parkway, Suite 416
Hauppauge, NY 11788
Tel: 516 273-5305 Fax: 516 273-5335
San Jose
Microchip Technology Inc.
2107 North First Street, Suite 590
San Jose, CA 95131
Tel: 408 436-7950 Fax: 408 436-7955
Toronto
Microchip Technology Inc.
5925 Airport Road, Suite 200
Mississauga, Ontario L4V 1W1, Canada
Tel: 905 405-6279 Fax: 905 405-6253
All rights reserved. 1996, Microchip Technology Incorporated, USA. 9/96
Printed on recycled paper.
Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded by updates. No repre-
sentation or warranty is given and no liability is assumed by Microchip Technology Incorporated with respect to the accuracy or use of such information, or infringement
of patents or other intellectual property rights arising from such use or otherwise. Use of Microchip’s products as critical components in life support systems is not autho-
rized except with express written approval by Microchip. No licenses are conveyed, implicitly or otherwise, under any intellectual property rights. The Microchip logo and
name are registered trademarks of Microchip Technology Inc. All rights reserved. All other trademarks mentioned herein are the property of their respective companies.
DS11003K-page 12
1996 Microchip Technology Inc.
相关型号:
©2020 ICPDF网 联系我们和版权申明