GRM1555C1H2R2CZ01D_技术文档

Wireless Security Remote Control

Development Kit

User’s Guide

 2012 Microchip Technology Inc.

DS41646A

Note the following details of the code protection feature on Microchip devices:

•

Microchip products meet the specification contained in their particular Microchip Data Sheet.

•

Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the

intended manner and under normal conditions.

•

There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our

knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data

Sheets. Most likely, the person doing so is engaged in theft of intellectual property.

•

Microchip is willing to work with the customer who is concerned about the integrity of their code.

Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not

mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our

products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts

allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Information contained in this publication regarding device

applications and the like is provided only for your convenience

and may be superseded by updates. It is your responsibility to

ensure that your application meets with your specifications.

MICROCHIP MAKES NO REPRESENTATIONS OR

WARRANTIES OF ANY KIND WHETHER EXPRESS OR

IMPLIED, WRITTEN OR ORAL, STATUTORY OR

OTHERWISE, RELATED TO THE INFORMATION,

INCLUDING BUT NOT LIMITED TO ITS CONDITION,

QUALITY, PERFORMANCE, MERCHANTABILITY OR

FITNESS FOR PURPOSE. Microchip disclaims all liability

arising from this information and its use. Use of Microchip

devices in life support and/or safety applications is entirely at

the buyer’s risk, and the buyer agrees to defend, indemnify and

hold harmless Microchip from any and all damages, claims,

suits, or expenses resulting from such use. No licenses are

conveyed, implicitly or otherwise, under any Microchip

intellectual property rights.

Trademarks

The Microchip name and logo, the Microchip logo, dsPIC,

KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART,

PIC³²logo, rfPIC and UNI/O are registered trademarks of

Microchip Technology Incorporated in the U.S.A. and other

countries.

FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor,

MXDEV, MXLAB, SEEVAL and The Embedded Control

Solutions Company are registered trademarks of Microchip

Technology Incorporated in the U.S.A.

Analog-for-the-Digital Age, Application Maestro, chipKIT,

chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net,

dsPICworks, dsSPEAK, ECAN, ECONOMONITOR,

FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP,

Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB,

MPLINK, mTouch, Omniscient Code Generation, PICC,

PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE,

rfLAB, Select Mode, Total Endurance, TSHARC,

UniWinDriver, WiperLock and ZENA are trademarks of

Microchip Technology Incorporated in the U.S.A. and other

countries.

SQTP is a service mark of Microchip Technology Incorporated

in the U.S.A.

All other trademarks mentioned herein are property of their

respective companies.

Printed on recycled paper.

ISBN: 9781620764145

QUALITY MANAGEMENT SYSTEM

CERTIFIED BY DNV

Microchip received ISO/TS-16949:2009 certification for its worldwide

headquarters, design and wafer fabrication facilities in Chandler and

Tempe, Arizona; Gresham, Oregon and design centers in California

and India. The Company’s quality system processes and procedures

are for its PIC^®MCUs and dsPIC^®DSCs, KEELOQ^®code hopping

devices, Serial EEPROMs, microperipherals, nonvolatile memory and

analog products. In addition, Microchip’s quality system for the design

and manufacture of development systems is ISO 9001:2000 certified.

== ISO/TS 16949 ==

DS41646A-page 2

 2012 Microchip Technology Inc.

Object of Declaration: Wireless Security Remote Control Development Kit

 2012 Microchip Technology Inc.

DS41646A-page 3

Wireless Security Remote Control Development Kit User’s Guide

NOTES:

DS41646A-page 4

 2012 Microchip Technology Inc.

WIRELESS SECURITY REMOTE CONTROL

DEVELOPMENT KIT USER’S GUIDE

Table of Contents

Preface ........................................................................................................................... 7

Chapter 1. Overview

1.1 Introduction ................................................................................................... 13

1.2 Wireless Security Remote Control Development Kit Contents ..................... 13

1.3 Getting Started ............................................................................................. 13

Chapter 2. Getting Started

2.1 Introduction ................................................................................................... 15

2.2 Hardware Requirements .............................................................................. 15

2.3 Software Requirements ................................................................................ 15

2.4 Demo Setup ................................................................................................. 15

2.5 Demo Operation ........................................................................................... 16

2.6 Embedded Security Development Board Hardware Self-Check .................. 19

Chapter 3. PIC12LF1840T39A Wireless Remote Key Fob

3.1 Introduction ................................................................................................... 21

3.2 Hardware Description ................................................................................... 21

3.3 Printed Circuit Board Description ................................................................. 21

3.4 PCB Antenna Description ............................................................................. 22

Chapter 4. SX1239 Receiver PICtail™ Daughter Board

4.1 Introduction ................................................................................................... 25

4.2 Hardware Description ................................................................................... 25

Chapter 5. Embedded Security Development Board

5.1 Introduction ................................................................................................... 27

5.2 Hardware Description ................................................................................... 28

Chapter 6. Developing with the Wireless Security Remote Control Development Kit

6.1 Introduction ................................................................................................... 31

6.2 Developing with a Key Fob as Transmitter .................................................. 31

6.3 Developing with the Embedded Security Development Board as Receiver . 32

Appendix A. PIC12LF1840T39A Wireless Remote Key Fob Schematics

Appendix B. SX1239 Receiver PICtail™ Daughter Board Schematics

Appendix C. Embedded Security Development Board Schematics

Worldwide Sales and Service .................................................................................... 50

 2012 Microchip Technology Inc.

DS41646A-page 5

Wireless Security Remote Control Development Kit User’s Guide

NOTES:

DS41646A-page 6

 2012 Microchip Technology Inc.

WIRELESS SECURITY REMOTE CONTROL

DEVELOPMENT KIT USER’S GUIDE

Preface

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and

documentation are constantly evolving to meet customer needs, so some actual dialogs

and/or tool descriptions may differ from those in this document. Please refer to our web site

(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each

page, in front of the page number. The numbering convention for the DS number is

“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the

document.

®

For the most up-to-date information on development tools, see the MPLAB IDE online help.

Select the Help menu, and then Topics to open a list of available online help files.

INTRODUCTION

This chapter contains general information that will be useful to know before using the

Wireless Security Remote Control Development Kit User’s Guide. Items discussed in

this chapter include:

• Document Layout

• Conventions Used in this Guide

• Warranty Registration

• Recommended Reading

• The Microchip Web Site

• Development Systems Customer Change Notification Service

• Customer Support

• Revision History

DOCUMENT LAYOUT

This document describes how to use the Wireless Security Remote Control Development

®

Kit (WSRCDK) to evaluate and experiment with Microchip KEELOQ Remote Keyless

Entry (RKE) solutions. The main layout is as follows:

• Chapter 1. “Overview” – This chapter describes the WSRCDK and how it works.

• Chapter 2. “Getting Started” – This chapter describes the procedures to

demonstrate Microchip KEELOQ RKE solution on WSRCDK.

• Chapter 3. “PIC12LF1840T39A Wireless Remote Key Fob” – This chapter

provides the hardware details of the wireless key fob.

• Chapter 4. “SX1239 Receiver PICtail™ Daughter Board” – This chapter

provides the hardware details of the Receiver PICtail Daughter Board.

• Chapter 5. “Embedded Security Development Board” – This chapter provides

the hardware details of the Embedded Security Development Board.

 2012 Microchip Technology Inc.

DS41646A-page 7

Wireless Security Remote Control Development Kit User’s Guide

• Chapter 6. “Developing with the Wireless Security Remote Control

Development Kit” – This chapter provides suggestions on the development based

on Microchip RKE solution.

• Appendix A. “PIC12LF1840T39A Wireless Remote Key Fob Schematics” –

This appendix provides the PCB layout, BOM and schematics.

• Appendix B. “SX1239 Receiver PICtail™ Daughter Board Schematics” – This

appendix provides the PCB layout, BOM and schematics.

• Appendix C. “Embedded Security Development Board Schematics” – This

appendix provides the PCB layout, BOM and schematics.

CONVENTIONS USED IN THIS GUIDE

This manual uses the following documentation conventions:

DOCUMENTATION CONVENTIONS

Description

Represents

Examples

Arial font:

Italic characters

Initial caps

Referenced books

Emphasized text

A window

MPLAB^®IDE User’s Guide

...is the only compiler...

the Output window

A dialog

the Settings dialog

A menu selection

select Enable Programmer

“Save project before build”

Quotes

A field name in a window or

dialog

Underlined, italic text with

right angle bracket

A menu path

File>Save

Bold characters

A dialog button

A tab

Click OK

Click the Power tab

4‘b0010, 2‘hF1

N‘Rnnnn

A number in verilog format,

where N is the total number of

digits, R is the radix and n is a

digit.

Text in angle brackets < >

Courier New font:

A key on the keyboard

Press <Enter>, <F1>

Plain Courier New

Sample source code

Filenames

#define START

autoexec.bat

c:\mcc18\h

File paths

Keywords

_asm, _endasm, static

-Opa+, -Opa-

0, 1

Command-line options

Bit values

Constants

0xFF, ‘A’

Italic Courier New

Square brackets [ ]

A variable argument

file.o, where file can be

any valid filename

Optional arguments

mcc18 [options] file

[options]

Curly brackets and pipe

character: { | }

Choice of mutually exclusive errorlevel {0|1}

arguments; an OR selection

Ellipses...

Replaces repeated text

var_name [,

var_name...]

Represents code supplied by void main (void)

user

{ ...

}

DS41646A-page 8

 2012 Microchip Technology Inc.

Preface

WARRANTY REGISTRATION

Please complete the enclosed Warranty Registration Card and mail it promptly.

Sending in the Warranty Registration Card entitles users to receive new product

updates. Interim software releases are available at the Microchip web site.

RECOMMENDED READING

This user’s guide describes how to use the Wireless Security Remote Control

Development Kit User’s Guide. Other useful documents are listed below. The following

Microchip documents are available and recommended as supplemental reference

resources.

Readme Files

For the latest information on using other tools, read the tool-specific Readme files in

the Readme subdirectory of the MPLAB^®IDE installation directory. The Readme files

contain update information and known issues that may not be included in this user’s

guide.

Application Notes

There are several application notes available from Microchip that help in understanding

Microchip KEELOQ applications. These include:

®

• AN1259 “KEELOQ Microcontroller-based Code Hopping Encoder”

®

• AN1265 “KEELOQ with AES Microcontroller-based Code Hopping Encoder”

®

• AN743 “Modular PIC Mid-Range MCU Code Hopping Decoder”

®

• AN745 “Modular Mid-Range PIC Decoder in C”

®

• AN1275 “KEELOQ with AES Receiver/Decoder”

 2012 Microchip Technology Inc.

DS41646A-page 9

Wireless Security Remote Control Development Kit User’s Guide

THE MICROCHIP WEB SITE

Microchip provides online support via our web site at www.microchip.com. This web

site is used as a means to make files and information easily available to customers.

Accessible by using your favorite Internet browser, the web site contains the following

information:

• Product Support – Data sheets and errata, application notes and sample

programs, design resources, user’s guides and hardware support documents,

latest software releases and archived software

• General Technical Support – Frequently Asked Questions (FAQs), technical

support requests, online discussion groups, Microchip consultant program

member listing

• Business of Microchip – Product selector and ordering guides, latest Microchip

press releases, listing of seminars and events, listings of Microchip sales offices,

distributors and factory representatives

DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE

Microchip’s customer notification service helps keep customers current on Microchip

products. Subscribers will receive e-mail notification whenever there are changes,

updates, revisions or errata related to a specified product family or development tool of

interest.

To register, access the Microchip web site at www.microchip.com, click on Customer

Change Notification and follow the registration instructions.

The Development Systems product group categories are:

• Compilers – The latest information on Microchip C compilers, assemblers, linkers

and other language tools. These include all MPLAB C compilers; all MPLAB

assemblers (including MPASM™ assembler); all MPLAB linkers (including

MPLINK™ object linker); and all MPLAB librarians (including MPLIB™ object

librarian).

• Emulators – The latest information on Microchip in-circuit emulators.This

includes the MPLAB REAL ICE™ and MPLAB ICE 2000 in-circuit emulators.

• In-Circuit Debuggers – The latest information on the Microchip in-circuit

debuggers. This includes MPLAB ICD 3 in-circuit debuggers and PICkit™ 3

debug express.

®

• MPLAB IDE – The latest information on Microchip MPLAB IDE, the Windows

Integrated Development Environment for development systems tools. This list is

focused on the MPLAB IDE, MPLAB IDE Project Manager, MPLAB Editor and

MPLAB SIM simulator, as well as general editing and debugging features.

• Programmers – The latest information on Microchip programmers. These include

production programmers such as MPLAB REAL ICE in-circuit emulator, MPLAB

ICD 3 in-circuit debugger and MPLAB PM3 device programmers. Also included

®

are nonproduction development programmers such as PICSTART Plus and

PICkit 2 and 3.

DS41646A-page 10

 2012 Microchip Technology Inc.

Preface

CUSTOMER SUPPORT

Users of Microchip products can receive assistance through several channels:

• Distributor or Representative

• Local Sales Office

• Field Application Engineer (FAE)

• Technical Support

Customers should contact their distributor, representative or field application engineer

(FAE) for support. Local sales offices are also available to help customers. A listing of

sales offices and locations is included in the back of this document.

Technical support is available through the web site at:

http://www.microchip.com/support.

REVISION HISTORY

Revision A (July 2012)

• Initial Release of this Document.

 2012 Microchip Technology Inc.

DS41646A-page 11

Wireless Security Remote Control Development Kit User’s Guide

NOTES:

DS41646A-page 12

 2012 Microchip Technology Inc.

WIRELESS SECURITY REMOTE CONTROL

DEVELOPMENT KIT USER’S GUIDE

Chapter 1. Overview

1.1

INTRODUCTION

The Wireless Security Remote Control Development Kit is a demonstration and

development platform for wireless security remote control applications. The kit demos

®

two security protocols, KEELOQ Classic and KEELOQ AES.

The kit contains a four-button key fob transmitter based on the PIC12LF1840T39A,

SX1239 Receiver PICtail™ Daughter Board, and the Embedded Security Development

Board. The kits can be purchased in one of three transmit frequencies. See the next

section for ordering part numbers.

• Wireless Security Remote Control Development Kit Contents

• Getting Started

1.2

WIRELESS SECURITY REMOTE CONTROL DEVELOPMENT KIT CONTENTS

The Wireless Security Remote Control Development Kits have three frequency

choices:

• Wireless Security Remote Control Development Kit – 433.92 MHz (DM182017-1)

• Wireless Security Remote Control Development Kit – 868 MHz (DM182017-2)

• Wireless Security Remote Control Development Kit – 915 MHz (DM182017-3)

Each kit contains:

• PIC12LF1840T39A Wireless Remote Key Fob (Chapter 3. “PIC12LF1840T39A

Wireless Remote Key Fob”

• SX1239 Receiver PICtail Daughter Board (Chapter 4. “SX1239 Receiver PICtail™

Daughter Board” Appendix B

• Embedded Security Development Board (Chapter 5. “Embedded Security

, Appendix A)

,

)

Development Board”, Appendix C)

• USB Cable

• CR2032 Coin Cell Battery

1.3

GETTING STARTED

Chapter 2. “Getting Started” provides a getting started tutorial to familiarize users

with the Wireless Security Remote Control Development Kit.

 2012 Microchip Technology Inc.

DS41646A-page 13

Wireless Security Remote Control Development Kit User’s Guide

NOTES:

DS41646A-page 14

 2012 Microchip Technology Inc.

WIRELESS SECURITY REMOTE CONTROL

DEVELOPMENT KIT USER’S GUIDE

Chapter 2. Getting Started

2.1

INTRODUCTION

This chapter provides a getting started tutorial to familiarize users with the Wireless

Security Remote Control Development Kit.

The following topics are discussed in this chapter:

• Hardware Requirements

• Software Requirements

• Demo Setup

• Demo Operation

2.2

HARDWARE REQUIREMENTS

The following hardware is required to run the pre-programmed demo application:

• PIC12LF1840T39A Wireless Remote Key Fob

• SX1239 Receiver PICtail™ Daughter Board

• Embedded Security Development Board

• USB A to Mini-B Cable (to power the Embedded Security Development Board or

power can also be provided by a bench power supply)

2.3

2.4

SOFTWARE REQUIREMENTS

The PIC12LF1840T39A Key Fob and Embedded Security Development Board are

pre-programmed with a remote control demo program. The demo setup and operation

are explained in the following sections.

The source code for the demo is available from the Wireless Security Remote Control

Development Kit product web page at http://www.microchip.com/security.

DEMO SETUP

This section describes how to set up the kit contents to operate the remote control

demo program.

1. Obtain a CR2032 coin battery (if not included in the development kit)

2. Open the plastic enclosure of the red key fob by carefully prying apart the two

halves. Remove the PCB board from the plastic enclosure carefully. Observe the

correct battery polarity and insert the CR2032 coin battery into the battery holder.

Put the PCB board back in the plastic enclosure and close the enclosure.

3. To verify that the key fob is properly installed, press any button and the LED

should be flashing when the button is pressed.

4. Plug in the RF receiver daughter board on the PICtail slot of the Embedded

Security Development Board. Make sure that the RF receiver daughter board

has the side with RF receiver chip face the center, as shown in Figure 2-1.

 2012 Microchip Technology Inc.

DS41646A-page 15

Wireless Security Remote Control Development Kit User’s Guide

FIGURE 2-1:

PLUG THE SX1239 RECEIVER PICtail™ DAUGHTER CARD

INTO THE EMBEDDED SECURITY DEVELOPMENT BOARD

5. Power-up the Embedded Security Development Board.

To power the Embedded Security Development Board from the USB port, connect the

USB A to mini-B cable to the development board and an available USB port or USB

power source. Set jumper J6 to pins 1-2. When using a USB port for power, there is no

requirement to load the USB drivers.

To power the Embedded Security Development Board from an external power supply,

connect test points labeled +VEXT and GND to a bench power supply set to 3.3 VDC.

Place jumper J6 to pins 2-3.

2.5

DEMO OPERATION

The pre-programmed demo is used to demonstrate the basic operation of Microchip

Remote Keyless Entry (RKE) solutions. The demo highlights capabilities of transmitting

®

and receiving data that is secured over the air. Two different methods, KEELOQ Classic

®

and KEELOQ AES, are used in this demo.

2.5.1

Key Fob as Transmitter

The pre-programmed demonstration shows how to secure information during data

transmission. Pressing any one of four buttons on the red key fob, the information

about the pressed button will be encrypted and transmitted. When data is being

transmitted, the LED on the key fob will flash. Two ways to secure the information have

been shown in this demo: KEELOQ Classic and KEELOQ AES. When button 1 or 2 (see

Figure 2-2) is pressed, the information is secured with KEELOQ Classic before the

transmission; when button 3 or 4 (see Figure 2-2) is pressed, the information is secured

with KEELOQ AES before the transmission.

For details on KEELOQ Classic and KEELOQ AES, please refer to Microchip application

®

notes AN1259, “KEELOQ Microcontroller-Based Code Hopping Encoder” and AN1265

®

“KEELOQ with AES Microcontroller-Based Code Hopping Encoder”.

The key fob has four push buttons and is powered by a CR2032 coin battery. The key

fob is shown in Figure 2-2, where the four buttons are labeled individually.

DS41646A-page 16

 2012 Microchip Technology Inc.

Getting Started

FIGURE 2-2:

KEY FOB WITH FOUR PUSH BUTTONS

TopꢀButtonꢀ

3

LeftꢀButtonꢀ

1ꢀ

RightꢀButtonꢀ

4

BottomꢀButtonꢀ

2

LEDꢀ

2.5.2

Embedded Security Development Board as Receiver

When the SX1239 Receiver PICtail Daughter Board receives a secured packet, the

content of the packet is acquired by the target application microcontroller. Based on the

length of the received packet, the target application microcontroller decides the cipher

(KEELOQ Classic or KEELOQ AES) that is used to secure the data. The decryption

process reveals the plain text, and the authentication process verifies whether the plain

text is valid information.

2.5.2.1

KEELOQ CLASSIC

For KEELOQ Classic, only a message from a known transmitter can be accepted by the

receiver. If a packet is received from an unknown transmitter, the message “KLQ

Transmitter Not Learned” will be displayed on the LCD, as shown in Figure 2-3.

FIGURE 2-3:

ERROR MESSAGE OF RECEIVING PACKET FROM

UNKNOWN TRANSMITTER

To learn a transmitter, the receiver initiates the learning process by pressing button

SW4. The learning procedure will be started and the message “Learn mode active”

will be displayed on the LCD, as shown in Figure 2-4.

FIGURE 2-4:

START LEARN MODE

 2012 Microchip Technology Inc.

DS41646A-page 17

Wireless Security Remote Control Development Kit User’s Guide

In the event no KEELOQ Classic packet from an unknown transmitter is received within

18 seconds, the KEELOQ Classic learn mode will time out and display the message

“Learn mode timeout” on the LCD, as shown in Figure 2-5.

FIGURE 2-5:

LEARN MODE TIMEOUT

The known transmitters and their latest counters are stored in the Nonvolatile Memory

(NVM) space of the microcontroller. When all slots in the NVM space for transmitters

are taken, the learning process will fail. Pressing and holding button SW3 for a few

seconds will erase all transmitter records from the NVM, and then the display message

“Memory Erased” on the LCD, as shown in Figure 2-6.

FIGURE 2-6:

ERASE TRANSMITTER RECORDS FROM MEMORY

When a KEELOQ Classic packet is received from a known transmitter, the contents of

the packet is displayed on the LCD, as shown in Figure 2-7. The following information

from the KEELOQ Classic packet are available:

• Encoder: KLQ that represents KEELOQ Classic

• Serial number of the transmitter: 28-bit serial number (according to Figure 2-7) in

this transmission

• Counter: 16-bit number (according to Figure 2-7) in this transmission

• Function Code: A bitmap of the pressed buttons (it will be 3 if both KLQ buttons

are pressed), depending on the button pressed on the key fob

FIGURE 2-7:

KEELOQ PACKET INFORMATION

DS41646A-page 18

 2012 Microchip Technology Inc.

Getting Started

2.5.2.2

KEELOQ AES

For KEELOQ AES, there is no requirement that a transmitter must be known to the

receiver before a packet can be accepted, so there is no learning process for a packet

that is encoded with KEELOQ AES cipher. When a KEELOQ AES packet is received, the

contents of the packet is displayed on the LCD, as shown in Figure 2-8. The following

information from the KEELOQ AES packet are available:

• Encoder: AES that represents KEELOQ AES

• Serial number of the transmitter: 32-bit serial number (according to Figure 2-8) in

this transmission

• Counter: 32-bit counter (according to Figure 2-8) in this transmission

• Function Code: A bitmap of pressed buttons, depending on the button pressed on

the key fob

FIGURE 2-8:

2.6

EMBEDDED SECURITY DEVELOPMENT BOARD HARDWARE SELF-CHECK

A hardware self-check can be performed to ensure the hardware integrity of the

Embedded Security Development Board. The instruction of the hardware self-check is

displayed on the LCD. The test result is either checked by firmware and display on the

LCD, or verified by user observation.

To initiate the hardware self-check, press and hold push button SW1 before powering

up the Embedded Security Development Board. SW1 can then be released when

“HDW Self Tests” is displayed on the LCD screen. Four individual hardware self-tests

will then be performed one by one.

2.6.0.1

BUTTON TESTS

“Button Test” will be displayed on the first line of the LCD display. Test instructions of

pressing individual buttons will be displayed on the second line of the LCD display.

Once a required push button is pressed, the test instruction message will be changed

for the next push button. Once all push buttons have been tested, SW1 needs to be

pressed to move forward to the LED test.

2.6.0.2

LED TESTS

There are two sets, ten LEDs, which can be controlled by the host and target

application microcontroller separately. When LED tests start, the message “LEDs

Flashing” will be displayed on the first line of the LCD display. During the tests, two

sets of LEDs will be flashing separately, while LEDs from the same set should be

flashing together. The user should observe that all LEDs are turned on and off with

flashing intervals of roughly one second. Once the user has verified the LED test, SW1

needs to be pressed to move forward to the RTCC test.

 2012 Microchip Technology Inc.

DS41646A-page 19

Wireless Security Remote Control Development Kit User’s Guide

2.6.0.3

RTCC TEST

When RTCC tests are initiated, the LCD display will show the clock and calendar. If no

coin battery for RTCC has been installed, the time displayed will be close to the reset

time of January 1, 2012. On the other hand, if a coin battery for RTCC is installed, the

time displayed will be based on whatever is previously set, plus the time that has been

passed. Observe that the clock is advancing. Once the RTCC test is done, SW1 needs

to be pressed to move forward to the SPI test.

2.6.0.4

SPI TEST

The SPI test in hardware self-check is performed to the SPI bus that connects the

target application microcontroller and the SX1239 Receiver PICtail Daughter Board.

Therefore, the SX1239 Receiver PICtail Daughter Board must have been plugged in

before this test starts. Once the SPI test starts, the target application microcontroller

requests specific information from the SX1239 receiver through the SPI bus. If the

expected response is received, then the “Successful” status will be displayed;

otherwise, the “Fail” status will be displayed.

Note: If a PICtail daughter board other than the SX1239 Receiver PICtail

Daughter Board is plugged into the PICtail connector, even though the SPI

bus may still work, the SPI test might show failure status. The reason is due

to the expected values to be received from the SX1239.

DS41646A-page 20

 2012 Microchip Technology Inc.

WIRELESS SECURITY REMOTE CONTROL

DEVELOPMENT KIT USER’S GUIDE

Chapter 3. PIC12LF1840T39A Wireless Remote Key Fob

3.1

INTRODUCTION

The PIC12LF1840T39A Wireless Remote Key Fob is a demonstration and

development platform for wireless security remote control applications. This section

gives a detailed description of the key fob.

3.2

HARDWARE DESCRIPTION

Figure 3-1 shows the key fob. The enclosure is an off-the-shelf key fob enclosure from

Polycase (http://www.polycase.com/). The enclosure houses a two-sided Printed

Circuit Board (PCB).

The schematic, PCB layout, and Bill of Materials are listed in Appendix

A. “PIC12LF1840T39A Wireless Remote Key Fob Schematics”.

FIGURE 3-1:

PIC12LF1840T39A WIRELESS REMOTE KEY FOB

TopꢀButtonꢀ

3

LeftꢀButtonꢀ

RightꢀButtonꢀ

4

1ꢀ

BottomꢀButtonꢀ

2

LEDꢀ

3.3

PRINTED CIRCUIT BOARD DESCRIPTION

The key fob PCB is a two-layer, plated through hole, 0.031 inches (0.7874 millimeters)

thick, FR4 material. Figure 3-2 shows the top layer of the PCB. All components, except

the LED, are on the top layer. A PCB antenna is employed in the design for reduced

cost and compactness. The PCB antenna is explained in more detail below.

P1 is the ICSP™ programming port. See Chapter 6. “Developing with the Wireless

Security Remote Control Development Kit” for suggestions on developing and

programming the key fob.

 2012 Microchip Technology Inc.

DS41646A-page 21

Wireless Security Remote Control Development Kit User’s Guide

FIGURE 3-2:

PCB TOP LAYER PHOTO

Figure 3-3 shows the bottom layer of the PCB. The bottom layer shows the PCB loop

antenna and the PCB traces for the conductive push buttons from the plastic enclosure.

FIGURE 3-3:

PCB BOTTOM LAYER PHOTO

3.4

PCB ANTENNA DESCRIPTION

The PCB antenna is a combination of top and bottom PCB layer traces, as shown in

Figure 3-4. The feed point from the transmitter is on the right side of the figure. It is a

top layer trace shown in red. It taps into the PCB loop antenna on the bottom layer

shown in blue. The antenna loops to the left side of the PCB and is terminated to ground

by a capacitor.

The PCB antenna is an “electrically small loop antenna.” That is, the wavelength of the

antenna is very much less than the one-quarter wavelength that antennas are normally

designed to. This type of antenna has an extremely high quality factor (Q). Therefore,

it is very susceptible to parasitic impedances and very challenging to impedance match

to the transmitter.

DS41646A-page 22

 2012 Microchip Technology Inc.

PIC12LF1840T39A Wireless Remote Key Fob

Figure 3-4 is a design suggestion. The designer is cautioned that even though this

design can be copied, the final product will require tuning. There are many factors that

determine the performance of a PCB antenna: thickness of the copper layer, thickness

of the PCB material, choice of the PCB material (e.g., FR4), and choice of the passive

components used in the impedance matching circuit. The PCB antenna dimensions are

not critical. Once the design has been tuned, what is important is the consistency of the

manufacture.

FIGURE 3-4:

PCB ANTENNA DIMENSIONS

Figure 3-5 shows the simulated three-dimensional plot of the radiation patter from the

antenna. Figure 3-6 shows the two-dimensional plots.

FIGURE 3-5:

PCB ANTENNA 3D RADIATION PATTERN (SIMULATED)

 2012 Microchip Technology Inc.

DS41646A-page 23

Wireless Security Remote Control Development Kit User’s Guide

FIGURE 3-6:

PCB ANTENNA 2D RADIATION PATTERN (SIMULATED)

ꢀ

DS41646A-page 24

 2012 Microchip Technology Inc.

WIRELESS SECURITY REMOTE CONTROL

DEVELOPMENT KIT USER’S GUIDE

Chapter 4. SX1239 Receiver PICtail™ Daughter Board

4.1

4.2

INTRODUCTION

The SX1239 PICtail™ Receiver Daughter Board is a demonstration and development

platform for wireless security remote control applications. This section gives a detailed

description of the receiver daughter board.

HARDWARE DESCRIPTION

Figure 4-1 shows the SX1239 Receiver PICtail Daughter Board. The schematic, PCB

layout, and Bill of Materials are listed in Appendix B. “SX1239 Receiver PICtail™

Daughter Board Schematics”.

FIGURE 4-1:

SX1239 PICtail™ DAUGHTER BOARD

Wireꢀ

Antenna

SlideꢀSwitchꢀ

S1ꢀ

28ꢁPinꢀPICtailꢂꢀ

Connector

ꢀ

The daughter board features the Semtech SX1239 Low-Power Integrated UHF

Receiver (http://www.semtech.com/wireless-rf/rf-receivers/sx1239/). The PICtail

daughter board can plug into the 28-pin PICtail connector featured on many Microchip

Technology development tools.

The antenna connection has a pin socket for plugging a wire antenna. This

demonstrates a simple and low-cost antenna option. The length of the antenna should

be approximately ¼ wavelength of the frequency of interest.

 2012 Microchip Technology Inc.

DS41646A-page 25

Wireless Security Remote Control Development Kit User’s Guide

The antenna pin socket can be removed by heating it with a soldering iron and cleaning

the connection. An SMA or reverse polarity SMA (RP-SMA) connector can be soldered

in place on the PCB. A whip or sleeve dipole antenna can then be used.

DS41646A-page 26

 2012 Microchip Technology Inc.

WIRELESS SECURITY REMOTE CONTROL

DEVELOPMENT KIT USER’S GUIDE

Chapter 5. Embedded Security Development Board

5.1

INTRODUCTION

The Embedded Security Development Board provides a demonstration and

development environment for security and authentication products. This section gives

a detailed description of the development board.

The layout of the Embedded Security Development Board is shown in Figure 5-1.

FIGURE 5-1:

EMBEDDED SECURITY DEVELOPMENT BOARD

11

10

1

2

4

3

5

7

6

9

8

The following main blocks are defined on the Embedded Security Development Board:

1. Target Application microcontroller U4

2. Host microcontroller U1

3. Serial Accessory Port P20

4. USB Interface Port J3

5. PICtail™ Connector J1

6. 16x2 character LCD display

7. Real-Time Clock and Calendar (RTCC) module U5

8. Push Buttons

9. LEDs

10. Voltage Regulator

11. ICSP™ Programming Ports, J4 for Host; J5 for Target Application

 2012 Microchip Technology Inc.

DS41646A-page 27

Wireless Security Remote Control Development Kit User’s Guide

5.2

HARDWARE DESCRIPTION

5.2.1

Serial Communications Connections

The Embedded Security Development Board is divided into two halves. The left side is

the host controller half. The right side is the target application half. The two halves are

connected by three wires labeled TP1, TP2, and TP3. Table 5-1 lists the respective

microcontroller I/O port connections.

TABLE 5-1:

SERIAL COMMUNICATIONS CONNECTIONS

Host Controller PIC16LF1947

(Slave)

Target Application PIC16LF1398

(Master)

Test Points

RF5

RB2

TP1

TP2

RB7/ICSPDAT

RB6/ICSPCLK

RF4

TP3

RE3/MCLR/VPP

The host controller half is controlled by a PIC16LF1947 microcontroller. The

PIC16LF1947 microcontroller communicates with a 16x2 character LCD display

(LCD1), an MCP2200 USB to UART communications IC (U2), an MCP795W10 SPI

Real-Time Clock Calendar IC (U5), four push button switches (SW5-SW8), and seven

LEDs (D8-D14). The PIC16LF1947 microcontroller can be programmed/debugged via

the ICSP™ header, J4. The host controller half schematic is shown in Appendix C as

Figure C-2.

The target application half has a PIC16LF1398 microcontroller. The PIC16LF1398

microcontroller communicates with the 28-pin PICtail connector (J1), Serial Accessory

Port (P20), four push button switches (SW1-SW4), and four LEDs (D4-D7). The

PIC16LF1398 microcontroller can be programmed/debugged via the ICSP header, J5.

The target application half schematic is shown in Appendix C as Figure C-3.

5.2.2

Serial Accessory Port (P20)

The Serial Accessory Port provides a simple serial interface for the external modules.

These modules may be either external sensor or accessory board. The partial list of

Microchip boards with SAP capabilities includes the following:

• LCD Serial Accessary Board

• RS232 Serial Accessary Board

For more information about the existing accessory boards, visit http://www.microchip.com

or refer to the “RS-232 Serial Accessory Board User’s Guide” (DS70649).

The following interfaces are supported by the Serial Accessory Port:

• 3 or 4 wire SPI

2

• I C™

• USART

The on-board switch “S1” selects these interfaces. Jumpers J7 and J8 pull-up resistors

2

when I C is selected and the pull-up resistors are not available on the daughter board.

Software modifications are expected to use those interfaces when pins are assigned

different functionalities. For more information on the port pin assignment, see the

schematic in Appendix C.

5.2.3

USB Interface Port

Microchip MCP2200 provides USB to UART support. MCP2200 provides automatic

conversion between UART and full-speed USB 2.0 communication. At the same time,

the USB interface port can be used to power the Embedded Security Development

Board directly. For more information, please refer to the Microchip MCP2200 data

sheet.

DS41646A-page 28

 2012 Microchip Technology Inc.

Embedded Security Development Board

5.2.4

PICtail Port

The PICtail port is a 28-pin interface port that supports Microchip’s RF-based daughter

cards. The PICtail port provides the following interfaces to the daughter cards:

• Power Supply

• SPI interface

• Interrupt request lines

• Other digital/analog I/O lines

Note: The user must be careful about the PICtail port pins that share different

functions of the board. The user needs to check the schematics before

assigning functions for any port pin.

There are many Microchip accessory daughter cards, which have PICtail port

connectivity. When not used as one of the components in the Wireless Security Remote

Control Development Kit, the Embedded Security Development Board can be

connected with any daughter board with PICtail port, and perform different

functionalities. Refer to the Microchip web site http://www.microchip.com for accessory

daughter boards with PICtail port.

5.2.5

LCD Display

The Embedded Security Development Board supports 16x2 character LCD display with

backlight. The LCD is controlled by the host microcontroller through the SPI port. For

details about the LCD display, refer to the data sheet of NHD-C0216CZ-FSW-FBW-3V3

by Newhaven Display (http://www.newhavendisplay.com).

5.2.6

Real-Time Clock and Calendar (RTCC) Module

The Embedded Security Development Board RTCC module can be used to set and

track clock and calendar precisely. The RTCC functionality is achieved with the

Microchip MCP795W10. The RTCC module is controlled by the host microcontroller

through the SPI interface. The RTCC module can be powered either by the 3.3V power

from the Embedded Security Development Board, or by a separate coin battery when

external power is not available. For details on operating this RTCC module, refer to the

data sheet of the MCP795W10 at http://www.microchip.com/MCP795W10.

5.2.7

Push Buttons

The Embedded Security Development Board has two sets of push buttons. Each set

consists of four individual push buttons and serves as input to the host and target

application microcontrollers.

The four push buttons for the target application microcontroller are read as a single

analog input. Depending on the different ratios of pull-up and pull-down resister values,

the input analog voltages to the master microcontroller are different. Therefore, through

the ADC on the target application microcontroller, the button that is pressed can be

identified. Such design is used to save I/O pin requirement for the target application

microcontroller. The details of the push buttons design can be found in the schematics

in Appendix C.

The four push buttons for the host microcontroller are four separate digital inputs to the

slave microcontroller, due to the abundant I/O pin availability for the slave

microcontroller. All buttons are assigned to the individual interrupt lines of the

microcontroller and are not driven by external pull-up circuitry to save power

consumption. The user software must enable the PORTB pull-ups of the

microcontroller before evaluating the button state.

 2012 Microchip Technology Inc.

DS41646A-page 29

Wireless Security Remote Control Development Kit User’s Guide

The MCLR push button is connected to the RE3/MCLR pin of the target application

microcontroller. The RE3/MCLR pin of the target application microcontroller is also one

of the SPI lines that control the host microcontroller. When the target application and

host microcontrollers are interconnected, the RE3/MCLR pin of target application

microcontroller is configured to be a normal digital I/O pin; therefore, the MCLR push

button is ineffective. Otherwise, if an SPI intercommunication is not required between

the target application and host microcontroller, the pin can be configured as RESET

and the MCLR button can be used.

5.2.8

LEDs

There are two sets of LEDs that are controlled by the target application and host

microcontrollers, respectively. The target application MCU controls a set of four LEDs

through the digital output pins. The host MCU controls a set of six LEDs through digital

output pins. The two sets of LEDs may be useful in the demo or debugging process.

Two LEDs (D15, D16) on the left half are used to identify the TX and RX operation of

MCP2200. They cannot be controlled by the target application or host microcontroller.

Similarly, LED D2 indicates the power availability. This LED cannot be controlled either

by the target application or the host microcontroller.

5.2.9

Power Supply

The Embedded Security Development Board can be powered by one of the following

two sources:

• USB port

• External 3.3V power source through GND and +VEXT connectors

Jumper J6 is used to choose the power source. When the left side, pins 1-2 of J6, are

closed, USB power is selected; when the right side, pins 2-3 of J6, are closed, external

power source is selected.

When the USB port is used to power the board, the input voltage is stabilized by

Microchip MCP1703, 250 mA, 3.3V and low quiescent current LDO regulator U3.

5.2.10 ICSP™ Programming/Debugging Ports

There are two ICSP™ programming/debugging ports on the Embedded Security

Development Board. The ICSP port J4 on the left is used to program the host

microcontroller. The ICSP port J5 on the right is used to program the target application

microcontroller. Figure 5-2 shows the ICSP ports.

FIGURE 5-2:

ICSP™ PROGRAMMING/DEBUGGING PORTS

ꢀ

Masterꢀ

ICSP port

Slaveꢀ

™

ICSP™ portꢀ

ꢀ

DS41646A-page 30

 2012 Microchip Technology Inc.

WIRELESS SECURITY REMOTE CONTROL

DEVELOPMENT KIT USER’S GUIDE

Chapter 6. Developing with the Wireless Security Remote

Control Development Kit

6.1

INTRODUCTION

This chapter provides some suggestions regarding the development of an RKE

solution on the Wireless Security Remote Control Development Kit. General design

considerations are provided on both the transmitter and receiver side.

6.2

DEVELOPING WITH A KEY FOB AS TRANSMITTER

To modify the hex code in the key fob, the developer needs to open the red plastic

enclosure. The ICSP™ port is available on the key fob PCB as six contact areas. To

program the PIC12LF1840T39A on the PCB, the developer needs to perform the

following steps:

• Remove the PCB board from the plastic enclosure and lay the PCB board on a

nonconductive surface.

• Align the six ICSP pins to the contact areas on the PCB. Push the ICSP pins to

the contact areas and avoid any movement during programming. Figure 6-1

shows how to program the key fob.

• When testing the key fob transmission when the plastic enclosure is open, avoid

touching any PCB area with your finger.

Note: For simplicity, all key fobs in the demo share the same serial number.

FIGURE 6-1:

PROGRAMMING THE KEY FOB

As a secured RKE system, KEELOQ security keys, especially the manufacturer key is

essential to the security of the whole system. It is highly recommended to use

®

code-protect of the PIC MCU memory.

 2012 Microchip Technology Inc.

DS41646A-page 31

Wireless Security Remote Control Development Kit User’s Guide

The Microchip RKE demo uses PWM, driven by interrupt, in data whitening procedure.

The transmission data rate over the air that can be achieved is tightly related to the

operation speed of the microcontroller. Higher data rate requires faster processing

speed. Higher transmission data rate may reduce the total active time for each

transmission; however, higher microcontroller processing speed generally has more

current consumption. The real application may need compromise between higher data

rate and faster processing speed to get the optimal battery life.

6.3

DEVELOPING WITH THE EMBEDDED SECURITY DEVELOPMENT BOARD

AS RECEIVER

The Embedded Security Development Board acts as a receiver in the Wireless

Security Remote Control Development Kit. The target application microcontroller on

the right side of the development board is the driving host for the receiver. All data

receiving and KEELOQ security functionalities are performed by the target application

microcontroller. On the other hand, the host microcontroller is mainly used to drive the

LCD display in this demo.

If the developer decides to develop the application on the target application

microcontroller only, intercommunication between the target application and host

microcontrollers can be ignored. The prototyping area under the four push buttons for

target application controller can be used to prototype the application.

Same as the transmitter, when continuous mode is used to receive data, the data rate

is tightly associated with the processing speed of the microcontroller. Unlike the

transmitter, which is usually powered by battery, the receiving side usually is powered

by mains power, and power consumption is of less concern. It is possible to run the

microcontroller faster to compensate higher data rate.

On the other hand, if the developer decides to use the host microcontroller too, then

the intercommunication between the two microcontrollers may need attention. The host

microcontroller is an SPI slave, and thus requires faster response to the SPI command.

Generally speaking, if no SPI delay is applied by the target application controller side,

the operation speed of the host microcontroller needs to be double that of the target

application microcontroller.

DS41646A-page 32

 2012 Microchip Technology Inc.

WIRELESS SECURITY REMOTE CONTROL

DEVELOPMENT KIT USER’S GUIDE

Appendix A. PIC12LF1840T39A Wireless Remote Key Fob

Schematics

FIGURE A-1:

KEY FOB PCB ASSEMBLY – TOP SILKSCREEN

FIGURE A-2:

KEY FOB PCB ASSEMBLY – TOP COPPER

 2012 Microchip Technology Inc.

DS41646A-page 33

Wireless Security Remote Control Development Kit User’s Guide

FIGURE A-3:

KEY FOB PCB ASSEMBLY – BOTTOM COPPER

FIGURE A-4:

KEY FOB PCB ASSEMBLY – BOTTOM SILKSCREEN

DS41646A-page 34

 2012 Microchip Technology Inc.

PIC12LF1840T39A Wireless Remote Key Fob Schematics

FIGURE A-5:

KEY FOB SCHEMATIC

ICSP™

 2012 Microchip Technology Inc.

DS41646A-page 35

Wireless Security Remote Control Development Kit User’s Guide

TABLE A-1:

KEY FOB BOM

Value

Manufacturer

Part Number

Qty Designator

Description

Manufacturer

1

2

BT1

Holder Coin Cell 20MM Memory Protection

SMD Devices

BK-912

@BT1

C6, C7

Battery Lithium Coin 3V Panasonic – BSG

20mm

CR2032

0.1 µF

Capacitor, Ceramic,

Murata Electronics

GRM155R71C104KA88D

16V, +/-10%, X7R, SMT North America

0402

1

DS1

R6

Red

Diode, Light Emitting

OSRAM

Yageo

LS Q976-NR-1-0-20-R18

RC0402JR-07470RL

470 Ω

Resistor, 5%, ±100

ppm/C, SMT 0402

1

2

1

R3

10K Ω

100 Ω

47 kΩ

Resistor, 5%, ±100

ppm/C, SMT 0402

Yageo

RC0402JR-0710KL

RC0402JR-07100RL

RC0402JR-0747KL

R4

Resistor, 5%, ±100

ppm/C, SMT 0402

R1, R5

U1

Resistor, 5%, ±100

ppm/C, SMT 0402

Microcontroller with

UHF Transmitter

Microchip Technology PIC12LF1840T39A-I/SS

enclosure

C1

Enclosure, Key Fob,

4-button, Clear Red

Polycase

FB-20-4*9

1 pF

Capacitor, Ceramic,

±5%, SMT 0402

Murata Electronics

North America

GRM1555C1H1R0CA01D

LQG15HSR12J02D

L5

120 nH

Inductor, Ceramic, ±5%, Murata

SMT 0402

1

C4

C5

C3

1000 pF

1 nF

Capacitor, Ceramic,

Murata Electronics

GRM155R71H102KA01D

GRM1555C1H102JA01D

RC0402JR-070RL

Murata Electronics

Yageo

0 Ω

Resistor, 5%, ±100

ppm/C, SMT 0402

1

L4

L3

39 nH

2.2 pF

Inductor, Ceramic, ±5%, Murata Electronics

LQG15HS39NJ02D

SMT 0402

North America

Capacitor, Ceramic,

±5%, SMT 0402

Murata Electronics

North America

GRM1555C1H2R2CZ01D

1

C2

L2

L1

DNP

0 Ω

Do not populate

—

Resistor, 5%, ±100

ppm/C, SMT 0402

Yageo

RC0402JR-070RL

1

X1

24 MHz

CRYSTAL 24.000 MHz Abracon Corporation ABM8G-24.000MHZ-18-D2

DS41646A-page 36

 2012 Microchip Technology Inc.

PIC12LF1840T39A Wireless Remote Key Fob Schematics

TABLE A-1:

KEY FOB BOM (CONTINUED)

1

C5

9.1 pF

5.6 pF

Capacitor, Ceramic,

JohansonTechnology 500R07S9R1CV4T

C3

Capacitor, Ceramic,

50V, ±0.1 pF, UHI-Q

NP0, SMT 0402

JohansonTechnology 500R07S5R6CV4T

Inc

1

L4

L3

C2

0 Ω

3 pF

Resistor, 5%, ±100

ppm/C, SMT 0402

Yageo

RC0402JR-070RL

Resistor, 5%, ±100

ppm/C, SMT 0402

Capacitor, Ceramic,

50V, ±0.1 pF, UHI-Q

NP0, SMT 0402

JohansonTechnology 500R07S3R0BV4T

Inc

1

L2

L1

1 nH

Inductor, Ceramic, ±5%, JohansonTechnology L-07C1N0SV6T

SMT 0402 Inc

47 nH

Inductor, Ceramic, ±5%, Panasonic – ECG

SMT 0402

ELJ-RF47NGFB

1

X1

C5

C3

L4

L3

26 MHz

100 pF

DNP

CRYSTAL 26.000 MHz Abracon Corporation ABM8G-26.000MHZ-18-D2

Capacitor, Ceramic,

Do not populate

Murata Electronics

GRM1555C1H101JZ01D

—

DNP

27 nH

Inductor, Ceramic, ±5%, Murata Electronics

LQG15HS27NJ02D

SMT 0402

North America

1

C2

L2

L1

1.8 pF

0 Ω

Capacitor, Ceramic,

±5%, SMT 0402

Murata Electronics

North America

GRM1555C1H1R8CZ01D

RC0402JR-070RL

Resistor, 5%, ±100

ppm/C, SMT 0402

Yageo

27 nH

Inductor, Ceramic, ±5%, Murata Electronics

SMT 0402 North America

CRYSTAL 26.000 MHz Abracon Corporation ABM8G-26.000MHZ-18-D2

LQG15HS27NJ02D

1

X1

C5

C3

26 MHz

4.7 nH

4.7 pF

Inductor, Ceramic, ±5%, Murata Electronics

LQG15HS4N7S02D

Capacitor, Ceramic,

±5%, SMT 0402

Murata Electronics

North America

GRM1555C1H4R7CZ01D

1

L4

L3

C2

L2

L1

X1

1.8 nH

2.7 nH

2.7 pF

1.8 nH

15 nH

Inductor, Ceramic, ±5%, Murata Electronics

SMT 0402 North America

Inductor, Ceramic, ±5%, Murata Electronics

LQP15MN1N8B02D

LQG15HS2N7S02D

GRM1555C1H2R7CZ01D

LQP15MN1N8B02D

LQP15MN15NG02D

SMT 0402

North America

Capacitor, Ceramic,

±5%, SMT 0402

Murata Electronics

North America

Inductor, Ceramic, ±5%, Murata Electronics

SMT 0402 North America

Inductor, Ceramic, ±5%, Murata Electronics

SMT 0402 North America

CRYSTAL 26.000 MHz Abracon Corporation ABM8G-26.000MHZ-18-D2

26 MHz

 2012 Microchip Technology Inc.

DS41646A-page 37

Wireless Security Remote Control Development Kit User’s Guide

NOTES:

DS41646A-page 38

 2012 Microchip Technology Inc.

WIRELESS SECURITY REMOTE CONTROL

DEVELOPMENT KIT USER’S GUIDE

Appendix B. SX1239 Receiver PICtail™ Daughter Board

Schematics

FIGURE B-1:

SX1239 RECEIVER PICtail™ PCB ASSEMBLY

 2012 Microchip Technology Inc.

DS41646A-page 39

Wireless Security Remote Control Development Kit User’s Guide

FIGURE B-2:

RECEIVER PICtail™ SCHEMATIC

ꢐ

ꢗ

ꢐ

DS41646A-page 40

 2012 Microchip Technology Inc.

SX1239 Receiver PICtail™ Daughter Board Schematics

TABLE B-1:

SX1239 RECEIVER PICtail™ BOM

Manufacturer

Qty Designator

Value

Description

Manufacturer

Part Number

1

A1

Wire, 24AWG, Solid, PVC

Insul, Yellow

Alpha Wire

3050/1 YL005

1

4

1

C3, C4

0.1 µF

Cap, Ceramic, 0.1uF, 16V

+/-10% X7R

Murata Electronics

North America

GRM155R71C104KA88D

GRM1555C1H150JZ01D

0667-0-15-01-30-27-10-0

TSW-114-08-F-D-RA

C6, C7, C8, C9 15 pF

Cap, Ceramic, 15pF, 50V

+/-5% COG

Murata Electronics

North America

E1

J1

Pin Receptacle,

.015/.025Dia, 0667 Series

Mill-Max

Manufacturing Corp.

Terminal strip, 2X14,

0.100sp, Rt Angle, 0.025 sq

post

SAMTEC

1

S1

U1

Switch, DPDT, Miniature

Slide, Vert, SMD

E-Switch

EG1390A

RF Transceiver,

SEMTECH

SX1239IMLTRT

433/868/915 MHz, Low

Power, QFN24

1

Y1

C2

L2

32 MHz

Crystal, 32.0000 MHz,

10pF, SMD TXC Series 7M CORPORATION

TXC

7M-32.000MEEQ-T

1.2 pF

68 nH

Cap, Ceramic, 1.2pF, 50V

+/-0.25pF COG

Murata Electronics

North America

GRM1555C1H1R2CZ01D

LQW15AN68NJ00D

Inductor, 68nH, 140mA, Air Murata Electronics

Core, 5%

North America

2

1

C1, C5

22 pF

Cap, Ceramic, 22pF, 50V

+/-5% COG

Murata Electronics

North America

GRM1555C1H220JZ01D

LQG15HS12NJ02D

L1

12 nH

Inductor, 12nH, 500mA, Air Murata Electronics

Core, 5%

North America

Note:

Designator A1 Wire Antenna: Cut to 6.75 in. OAL.

1

C1

4.7 pF

13 nH

Cap, Ceramic, 4.7pF, 50V

Murata Electronics

GRM1555C1H4R7CZ01D

MLG1005S13NJ

L1

Inductor, 13nH, 500mA, Air TDK Corporation

Core, 5%

1

C5

3.6 pF

Cap, Ceramic, 3.6pF, 50V

+/-5% COG

Murata Electronics

North America

GRM1555C1H3R6CZ01D

Note:

Designator A1 Wire Antenna: Cut to 6.75 in. OAL.

 2012 Microchip Technology Inc.

DS41646A-page 41

Wireless Security Remote Control Development Kit User’s Guide

NOTES:

DS41646A-page 42

 2012 Microchip Technology Inc.

WIRELESS SECURITY REMOTE CONTROL

DEVELOPMENT KIT USER’S GUIDE

Appendix C. Embedded Security Development Board

Schematics

FIGURE C-1:

EMBEDDED SECURITY DEVELOPMENT BOARD PCB ASSEMBLY

 2012 Microchip Technology Inc.

DS41646A-page 43

Wireless Security Remote Control Development Kit User’s Guide

FIGURE C-2:

EMBEDDED SECURITY DEVELOPMENT BOARD SCHEMATIC (1 OF 2)

DS41646A-page 44

 2012 Microchip Technology Inc.

Embedded Security Development Board Schematics

FIGURE C-3:

EMBEDDED SECURITY DEVELOPMENT BOARD SCHEMATIC (2 OF 2)

 2012 Microchip Technology Inc.

DS41646A-page 45

Wireless Security Remote Control Development Kit User’s Guide

TABLE C-1:

EMBEDDED SECURITY DEVELOPMENT BOARD BOM

Qty

Part

VDD

Value

VDD

Manufacturer

MFG Part Number

5010

5011

1

Keystone

GND

1

3

BT1

C8

BK-885

8 pf

MPD (Memory Protection Devices) BK-885

TDK Corporation

Murata

C1608C0G1H080D

C9

C17

C10

C11

C18

C19

C1

8 pf

C1608C0G1H080D

2

9 pf

C1608C0G1H090D

9 pf

C1608C0G1H090D

1

10 pf

100 pf

0.1 µf

1 µf

C1608C0G1H100D

C1608C0G1H101J

11

GRM188R71E104KA01D

GRM188R61A105MA61D

B0520WS-7-F

C2

Murata

C3

Murata

C4

Murata

C5

Murata

C6

Murata

C7

Murata

C14

C16

C21

C22

C12

C13

C15

C20

C23

D1

Murata

5

Murata

1 µf

Murata

1 µf

Murata

1 µf

Murata

1 µf

Murata

1

B0520WS

Diodes Inc.

D3

D2

Fairchild Semiconductor

Lite-On

BAT54

LTST-C191GKT

D4

D5

D6

D7

D8

D9

D10

Lite-On

LTST-C191GKT

DS41646A-page 46

 2012 Microchip Technology Inc.

Embedded Security Development Board Schematics

TABLE C-1:

EMBEDDED SECURITY DEVELOPMENT BOARD BOM (CONTINUED)

D11

Lite-On

LTST-C191GKT

PPPC142LFBN-RC

UX60-MB-5ST

D12

D13

D14

D15

D16

Lite-On

1

J1

J3

PICtail™

Sullins

UX60-MB-5ST

Hirose Electric Co Ltd

1

J4

J5

DNP

Do Not Populate

PBC06SBAN

ICSP™

Sullins

1

J6

J7, J8

J9

PBC03SAAN

PBC02DAAN

PBC06SAAN

PBC14DAAN

J10

1

LCD1

P20

Newhaven Displays

Sullins

C0216CZ-FSW-FBW-3V3

PPPC061LGBN-RC

1

4

Q2

R1

International Rectifier

IRLML6302TRPBF

RMCF0603FT100R

RMCF0603FT330R

RMCF0603FT1K00

100 Ω

330 Ω

1k Ω

Stackpole Electronics International

R18

R20

R24

R2

16

R4

R5

R6

R7

R8

R9

R10

R11

R12

R13

R14

R15

R16

R28

R29

R26

1

 2012 Microchip Technology Inc.

DS41646A-page 47

Wireless Security Remote Control Development Kit User’s Guide

TABLE C-1:

EMBEDDED SECURITY DEVELOPMENT BOARD BOM (CONTINUED)

5

R17

R19

R25

R27

R30

R21

R22

R23

R31

R3

10k Ω

DNP Ω

10k Ω

12k Ω

20k Ω

28k Ω

100k Ω

1M Ω

Stackpole Electronics International

Do not Populate

RMCF0603FT10K0

Do Not Populate

RMCF0603FT10K0

RMCF0603FT12K0

RMCF0603FT20K0

RNCP0603FTD28K0

RMCF0603FT100K

RMCF0603FT1M00

EG1390B

Stackpole Electronics International

E-Switch

1

9

S1

SW1

SW2

SW3

SW4

SW5

SW6

SW7

SW8

MCLR

U1

Omron

B3S-1000P

Omron

B3S-1000P

Omron

B3S-1000P

Omron

B3S-1000P

Omron

B3S-1000P

Omron

B3S-1000P

Omron

B3S-1000P

Omron

B3S-1000P

Omron

B3S-1000P

1

2

P16LF1947-I/PT

MCP2200

Microchip Technology Inc.

PIC16LF1947-I/PT

MCP2200-I/MQ

MCP1703T-3302E/MB

PIC16LF1938-I/SS

MCP795W10-I/ST

NX3225SA-12.000000MHZ

ABS06-32.768KHZ-T

U2

U3

MCP1703-3.3

U4

PIC16LF1938-I/SS_28-PIN Microchip Technology Inc.

U5

MCP795W10-I/ST

12 MHz

Microchip Technology Inc.

Y1

NDK

Y2

32.768 kHz

Abracon

Y3

DS41646A-page 48

 2012 Microchip Technology Inc.

Wireless Security Remote Control Development Kit User’s Guide

NOTES:

 2012 Microchip Technology Inc.

DS41646A-page 49

Worldwide Sales and Service

AMERICAS

ASIA/PACIFIC

EUROPE

Corporate Office

2355 West Chandler Blvd.

Chandler, AZ 85224-6199

Tel: 480-792-7200

Fax: 480-792-7277

Technical Support:

http://www.microchip.com/

support

Asia Pacific Office

Suites 3707-14, 37th Floor

Tower 6, The Gateway

Harbour City, Kowloon

Hong Kong

Tel: 852-2401-1200

Fax: 852-2401-3431

India - Bangalore

Tel: 91-80-3090-4444

Fax: 91-80-3090-4123

Austria - Wels

Tel: 43-7242-2244-39

Fax: 43-7242-2244-393

Denmark - Copenhagen

Tel: 45-4450-2828

Fax: 45-4485-2829

India - New Delhi

Tel: 91-11-4160-8631

Fax: 91-11-4160-8632

France - Paris

Tel: 33-1-69-53-63-20

Fax: 33-1-69-30-90-79

India - Pune

Tel: 91-20-2566-1512

Fax: 91-20-2566-1513

Australia - Sydney

Tel: 61-2-9868-6733

Fax: 61-2-9868-6755

Web Address:

www.microchip.com

Germany - Munich

Tel: 49-89-627-144-0

Fax: 49-89-627-144-44

Japan - Osaka

Tel: 81-66-152-7160

Fax: 81-66-152-9310

Atlanta

Duluth, GA

Tel: 678-957-9614

Fax: 678-957-1455

China - Beijing

Tel: 86-10-8569-7000

Fax: 86-10-8528-2104

Italy - Milan

Tel: 39-0331-742611

Fax: 39-0331-466781

Japan - Yokohama

Tel: 81-45-471- 6166

Fax: 81-45-471-6122

China - Chengdu

Tel: 86-28-8665-5511

Fax: 86-28-8665-7889

Boston

Westborough, MA

Tel: 774-760-0087

Fax: 774-760-0088

Netherlands - Drunen

Tel: 31-416-690399

Fax: 31-416-690340

Korea - Daegu

Tel: 82-53-744-4301

Fax: 82-53-744-4302

China - Chongqing

Tel: 86-23-8980-9588

Fax: 86-23-8980-9500

Chicago

Itasca, IL

Tel: 630-285-0071

Fax: 630-285-0075

Spain - Madrid

Tel: 34-91-708-08-90

Fax: 34-91-708-08-91

Korea - Seoul

China - Hangzhou

Tel: 86-571-2819-3187

Fax: 86-571-2819-3189

Tel: 82-2-554-7200

Fax: 82-2-558-5932 or

82-2-558-5934

UK - Wokingham

Tel: 44-118-921-5869

Fax: 44-118-921-5820

Cleveland

Independence, OH

Tel: 216-447-0464

Fax: 216-447-0643

China - Hong Kong SAR

Tel: 852-2401-1200

Fax: 852-2401-3431

Malaysia - Kuala Lumpur

Tel: 60-3-6201-9857

Fax: 60-3-6201-9859

Dallas

Addison, TX

Tel: 972-818-7423

Fax: 972-818-2924

China - Nanjing

Tel: 86-25-8473-2460

Fax: 86-25-8473-2470

Malaysia - Penang

Tel: 60-4-227-8870

Fax: 60-4-227-4068

China - Qingdao

Tel: 86-532-8502-7355

Fax: 86-532-8502-7205

Philippines - Manila

Tel: 63-2-634-9065

Fax: 63-2-634-9069

Detroit

Farmington Hills, MI

Tel: 248-538-2250

Fax: 248-538-2260

China - Shanghai

Tel: 86-21-5407-5533

Fax: 86-21-5407-5066

Singapore

Tel: 65-6334-8870

Fax: 65-6334-8850

Indianapolis

Noblesville, IN

Tel: 317-773-8323

Fax: 317-773-5453

China - Shenyang

Tel: 86-24-2334-2829

Fax: 86-24-2334-2393

Taiwan - Hsin Chu

Tel: 886-3-5778-366

Fax: 886-3-5770-955

Los Angeles

China - Shenzhen

Tel: 86-755-8203-2660

Fax: 86-755-8203-1760

Taiwan - Kaohsiung

Tel: 886-7-536-4818

Fax: 886-7-330-9305

Mission Viejo, CA

Tel: 949-462-9523

Fax: 949-462-9608

China - Wuhan

Tel: 86-27-5980-5300

Fax: 86-27-5980-5118

Taiwan - Taipei

Tel: 886-2-2500-6610

Fax: 886-2-2508-0102

Santa Clara

Santa Clara, CA

Tel: 408-961-6444

Fax: 408-961-6445

China - Xian

Tel: 86-29-8833-7252

Fax: 86-29-8833-7256

Thailand - Bangkok

Tel: 66-2-694-1351

Fax: 66-2-694-1350

Toronto

Mississauga, Ontario,

Canada

China - Xiamen

Tel: 905-673-0699

Fax: 905-673-6509

Tel: 86-592-2388138

Fax: 86-592-2388130

China - Zhuhai

Tel: 86-756-3210040

Fax: 86-756-3210049

11/29/11

DS41646A-page 50

 2012 Microchip Technology Inc.


型号：	GRM1555C1H2R2CZ01D
厂家：	MICROCHIP
描述：	Wireless Security Remote Control Development Kit Userâs Guide 无线安全远程控制开发套件USERA ????指南远程控制无线
文件：	总50页 (文件大小：1343K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

GRM1555C1H2R2CZ01D [MICROCHIP]

相关型号：

GRM1555C1H2R2WA01#

GRM1555C1H2R2WA01D

GRM1555C1H2R3BA01#

GRM1555C1H2R3BA01D

GRM1555C1H2R3CA01#

GRM1555C1H2R3CA01D

GRM1555C1H2R3WA01#

GRM1555C1H2R3WA01D

GRM1555C1H2R4BA01#

GRM1555C1H2R4BA01D

GRM1555C1H2R4CA01#

GRM1555C1H2R4CA01D