MCP16323 [MICROCHIP]
This chapter contains general information that will be useful to know before using the MCP16323 Evaluation Board. Items discussed in this chapter include:; 本章包含将知道使用MCP16323评估板之前的一般信息。本章讨论的内容包括：
| 型号： | MCP16323 |
| 厂家： | 
MICROCHIP |
| 描述： | This chapter contains general information that will be useful to know before using the MCP16323 Evaluation Board. Items discussed in this chapter include: |
| 文件： | 总18页 (文件大小：226K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MCP16323
Evaluation Board
User’s Guide
2011 Microchip Technology Inc.
DS52029A
Note the following details of the code protection feature on Microchip devices:
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
•
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
•
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
•
•
Microchip is willing to work with the customer who is concerned about the integrity of their code.
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights.
Trademarks
The Microchip name and logo, the Microchip logo, dsPIC,
KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART,
32
PIC logo, rfPIC and UNI/O are registered trademarks of
Microchip Technology Incorporated in the U.S.A. and other
countries.
FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor,
MXDEV, MXLAB, SEEVAL and The Embedded Control
Solutions Company are registered trademarks of Microchip
Technology Incorporated in the U.S.A.
Analog-for-the-Digital Age, Application Maestro, chipKIT,
chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net,
dsPICworks, dsSPEAK, ECAN, ECONOMONITOR,
FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP,
Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB,
MPLINK, mTouch, Omniscient Code Generation, PICC,
PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE,
rfLAB, Select Mode, Total Endurance, TSHARC,
UniWinDriver, WiperLock and ZENA are trademarks of
Microchip Technology Incorporated in the U.S.A. and other
countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
© 2011, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.
ISBN: 978-1-61341-852-9
Microchip received ISO/TS-16949:2009 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
DS52029A-page 2
2011 Microchip Technology Inc.
MCP16323 EVALUATION BOARD
USER’S GUIDE
Table of Contents
Preface ........................................................................................................................... 5
Introduction............................................................................................................ 5
Document Layout .................................................................................................. 5
Conventions Used in this Guide............................................................................ 6
Recommended Reading........................................................................................ 7
The Microchip Web Site ........................................................................................ 7
Customer Support ................................................................................................. 7
Document Revision History................................................................................... 7
Chapter 1. Product Overview
1.1 Introduction ..................................................................................................... 9
1.2 MCP16323 Short Overview ............................................................................ 9
1.3 What is the MCP16323 Evaluation Board? .................................................. 10
1.4 MCP16323 Evaluation Board Kit Contents .................................................. 10
Chapter 2. Installation and Operation
2.1 Introduction ................................................................................................... 11
2.2 Getting Started ............................................................................................. 12
Appendix A. Schematic and Layouts
A.1 Introduction .................................................................................................. 13
A.2 Board – Schematic ....................................................................................... 14
A.3 Board – Top Layer ....................................................................................... 15
A.4 Board – Top Copper ................................................................................... 15
A.5 Board – Bottom Copper ............................................................................... 16
Appendix B. Bill of Materials
Worldwide Sales and Service .................................................................................... 18
2011 Microchip Technology Inc.
DS52029A-page 3
MCP16323 Evaluation Board User’s Guide
DS52029A-page 4
2011 Microchip Technology Inc.
MCP16323 EVALUATION BOARD
USER’S GUIDE
Preface
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB® IDE on-line help.
Select the Help menu, and then Topics to open a list of available on-line help files.
INTRODUCTION
This chapter contains general information that will be useful to know before using the
MCP16323 Evaluation Board. Items discussed in this chapter include:
• Document Layout
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Web Site
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This document describes how to use the MCP16323 Evaluation Board. The manual
layout is as follows:
• Chapter 1. “Product Overview” – Important information about the MCP16323
Evaluation Board.
• Chapter 2. “Installation and Operation” – Includes instructions on how to get
started with the MCP16323 Evaluation Board and a description of the user’s
guide.
• Appendix A. “Schematic and Layouts” – Shows the schematic and layout
diagrams for the MCP16323 Evaluation Board.
• Appendix B. “Bill of Materials” – Lists the parts used to build the MCP16323
Evaluation Board.
2011 Microchip Technology Inc.
DS52029A-page 5
MCP16323 Evaluation Board User’s Guide
CONVENTIONS USED IN THIS GUIDE
This manual uses the following documentation conventions:
DOCUMENTATION CONVENTIONS
Description
Arial font:
Represents
Examples
Italic characters
Referenced books
Emphasized text
A window
MPLAB® IDE User’s Guide
...is the only compiler...
the Output window
Initial caps
A dialog
the Settings dialog
A menu selection
select Enable Programmer
“Save project before build”
Quotes
A field name in a window or
dialog
Underlined, italic text with
right angle bracket
A menu path
File>Save
Bold characters
A dialog button
A tab
Click OK
Click the Power tab
4‘b0010, 2‘hF1
N‘Rnnnn
A number in verilog format,
where N is the total number of
digits, R is the radix and n is a
digit.
Text in angle brackets < >
Courier New font:
A key on the keyboard
Press <Enter>, <F1>
Plain Courier New
Sample source code
Filenames
#define START
autoexec.bat
c:\mcc18\h
File paths
Keywords
_asm, _endasm, static
-Opa+, -Opa-
0, 1
Command-line options
Bit values
Constants
0xFF, ‘A’
Italic Courier New
Square brackets [ ]
A variable argument
file.o, where file can be
any valid filename
Optional arguments
mcc18 [options] file
[options]
Curly brackets and pipe
character: { | }
Choice of mutually exclusive errorlevel {0|1}
arguments; an OR selection
Ellipses...
Replaces repeated text
var_name [,
var_name...]
Represents code supplied by void main (void)
user
{ ...
}
DS52029A-page 6
2011 Microchip Technology Inc.
Preface
RECOMMENDED READING
This user's guide describes how to use MCP16323 Evaluation Board. Other useful doc-
uments are listed below. The following Microchip documents are available and
recommended as supplemental reference resources.
• MCP16323 Data Sheet – “18V Input, 3A Output, High Efficiency
Synchronous Buck Regulator with Power Good Indication” (DS22284)
THE MICROCHIP WEB SITE
Microchip provides online support via our web site at www.microchip.com. This web
site is used as a means to make files and information easily available to customers.
Accessible by using your favorite Internet browser, the web site contains the following
information:
• Product Support – Data sheets and errata, application notes and sample
programs, design resources, user’s guides and hardware support documents,
latest software releases and archived software
• General Technical Support – Frequently Asked Questions (FAQs), technical
support requests, online discussion groups, Microchip consultant program
member listing
• Business of Microchip – Product selector and ordering guides, latest Microchip
press releases, listing of seminars and events, listings of Microchip sales offices,
distributors and factory representatives
CUSTOMER SUPPORT
Users of Microchip products can receive assistance through several channels:
• Distributor or Representative
• Local Sales Office
• Field Application Engineer (FAE)
• Technical Support
Customers should contact their distributor, representative or field application engineer
(FAE) for support. Local sales offices are also available to help customers. A listing of
sales offices and locations is included in the back of this document.
Technical support is available through the web site at: http://support.microchip.com.
DOCUMENT REVISION HISTORY
Revision A (November 2011)
• Initial Release of this Document.
2011 Microchip Technology Inc.
DS52029A-page 7
MCP16323 Evaluation Board User’s Guide
NOTES:
DS52029A-page 8
2011 Microchip Technology Inc.
MCP16323 EVALUATION BOARD
USER’S GUIDE
Chapter 1. Product Overview
1.1
1.2
INTRODUCTION
This chapter provides an overview of the MCP16323 Evaluation Board and covers the
following topics:
• MCP16323 Short Overview
• What is the MCP16323 Evaluation Board
• MCP16323 Evaluation Board kit contents
MCP16323 SHORT OVERVIEW
The MCP16323 is a highly integrated, high-efficiency, fixed frequency, synchronous,
step-down DC-DC converter in a popular 16-pin QFN package that operates from input
voltage sources up to 18V. Integrated features include a low resistance high-side
switch, low resistance low-side switch, 1.0 Mhz fixed-frequency peak-current mode
control, internal compensation, power good output, peak current limit, VOUT overvolt-
age and overtemperature protection. Minimal external components are necessary to
develop a complete step-down DC-DC converter power supply. The MCP16323 draws
less than 10 µA while disabled.
High converter efficiency is achieved by integrating the current limited, low resistance,
high-speed N-Channel MOSFETs and associated drive circuitry. Incorporating both the
upper and lower switches reduces the need for external components. High switching
frequency minimizes the size of external filtering components resulting in an overall
small solution size.
The MCP16323 can supply 3A of continuous current while regulating the output voltage
from 0.9V to 5V. An integrated high-performance peak-current mode architecture
keeps the output voltage tightly regulated even during input voltage steps and output
current transient conditions that are common in power systems.
2011 Microchip Technology Inc.
DS52029A-page 9
MCP16323 Evaluation Board User’s Guide
Pgood
10kꢀ
CBOOST
22 nF
BOOST
L1
4.7 μH
VIN
VOUT
PG
6.0V to 18V
3.0V @ 3A
VIN
EN
SW
10ꢀ
INJ
MCP16323
CIN
2 x 10 μF
COUT
2 x 22 μF
EN
FB
23.2kꢀ
SGND
PGND
10kꢀ
FIGURE 1-1:
Typical MCP16323 Buck Application.
1.3
1.4
WHAT IS THE MCP16323 EVALUATION BOARD?
The MCP16323 Evaluation Board is designed to operate from a 6V to 18V input and
regulate the output to 3.0V. Test points for input power and load are provided to dem-
onstrate the capability of the MCP16323 Evaluation Board over the entire range. The
MCP16323 Evaluation Board was designed using small surface-mount components to
show application size for a high-voltage buck design.
MCP16323 EVALUATION BOARD KIT CONTENTS
This MCP16323 Evaluation Board kit includes the following items:
• MCP16323 Evaluation Board, 102-00427
• Important Information Sheet
DS52029A-page 10
2011 Microchip Technology Inc.
MCP16323 EVALUATION BOARD
USER’S GUIDE
Chapter 2. Installation and Operation
2.1
INTRODUCTION
2.1.1
MCP16323 Features
The MCP16323 devices have been developed to provide high input voltage, high
current applications with a precisely regulated rail while operating at high efficiency.
The key features of the MCP16323 include:
• Up to 95% Typical Efficiency
• Input Voltage Range: 6.0V to 18V
• Output Voltage Range: .9V to 5V
• 1.5% Output Voltage Accuracy
• Integrated High-Side N-Channel Switch: 180 mΩ
• Integrated Low-Side N-Channel Switch: 120 mΩ
• 3A Output Current MCP16323
• 1 MHz Fixed Frequency
• Adjustable Output Voltage
• Low Device Shutdown Current
• Peak Current Mode Control
• Internal Compensation
• Stable with Ceramic Capacitors
• Internal Soft-Start
• Cycle by Cycle Peak Current Limit
• Under Voltage Lockout (UVLO): 5.75V (typical)
• Output Overvoltage Protection
• Overtemperature Protection
• Available Package: QFN-16
A high-performance peak-current mode control system is used to deliver a fast
response to sudden line and load changes.
2.1.2
MCP16323 Evaluation Board Features
The MCP16323 Evaluation Board is developed to demonstrate how the MCP16323
device operates as a Buck Topology over a wide input voltage and load range. Test
points are provided for input and output, allowing the MCP16323 Evaluation Board to
be connected directly to a system. Test vias are also included to give the user easy
access to the switch, power good, enable and injection nodes for easy evaluation of the
device. There are also ancillary vias provided for attaching extra input and output con-
nections. The 3A maximum continuous output current is available over the entire VIN
range (6.0V to 18.0V), along with the entire adjustable output voltage range (0.9V to
5.0V).
A copper via, labeled Pgood, connected to the power good pin on the device can be pop-
ulated to monitor the power good output of the device. The power good pin is externally
pulled up to VOUT with a 10 kΩ resistor (R2).
2011 Microchip Technology Inc.
DS52029A-page 11
MCP16323 Evaluation Board User’s Guide
A copper via, labeled INJ, connected between the 10Ω injection resistor (R1) and the
top resistor can be populated to allow a convenient injection point for stability analysis.
R
A copper via, labeled Enable, connected to the enable input on the device can be pop-
ulated and used to turn the MCP16323 on and off. Turning the device on (Enable >
2.2V) when the undervoltage lockout threshold is met (VIN > 5.75V), will enable the
device. This pin must be pulled low (Enable < 0.8V) to disable the device.
A copper via, labeled SW, connected to the switch node of the device can be populated
to analyze the switch node of the device.
2.2
GETTING STARTED
The MCP16323 Evaluation Board is fully assembled and tested to evaluate and dem-
onstrate the MCP16323 operational capabilities.
2.2.1
Power Input and Output Connection
2.2.1.1
POWERING THE MCP16323 EVALUATION BOARD
The MCP16323 Evaluation Board is fully assembled, tested and ready to begin evalu-
ation. Apply positive input voltage to the VIN terminal and its return to the GND terminal.
The maximum input voltage should not exceed 18V. An electronic load or resistive load
can be used for evaluation, or the intended system load can be connected. Electronic
loads attempt to sink current at 0V during startup; a resistive load or constant resis-
tance is recommended for startup evaluation. Connect the positive voltage terminal of
the load to the VOUT terminal on the MCP16323 Evaluation Board and connect the neg-
ative or return side of the load to the GND terminal.
2.2.1.2
BOARD TESTING
To test the board:
1. Apply greater than 6V to the input for proper operation, no minimum load is
required to regulate the output to 3.0V.
2. The EN input is internally pulled up to a low voltage internal source enabling the
device. To disable the device, the EN input can be pulled below 0.8V.
3. The measured output voltage should be 3.0V typical. Adjusting the input voltage
and load should not cause the output to vary significantly over the operating
range of the converter.
2.2.2
How the MCP16323 High-Side Drive Boost Circuit Operates
The MCP16323 integrates both high-side and low-side, low resistance N-Channel
MOSFETs. A high-side or floating supply is needed to drive the gate of the high-side
N-Channel MOSFET above the input voltage to turn it on. The evaluation board uses
the output voltage to charge the boost cap while the inductor current flows. Prior to
startup, there is no inductor current, so an internal pre-charge circuit charges the boost
cap up to a minimum threshold. Once charged, the N-Channel can be turned on, ramp-
ing current into the inductor.
The worst case operating conditions for charging the boost capacitor occur at minimum
V
IN and no load. At minimum VIN (6V), there is not enough headroom to pre-charge the
boost cap to a high value. At no load, the converter is operating at a minimum or very
low duty cycle, putting a small amount of current into the inductor. When the switch
turns off, the inductor current decays very quickly, resulting in a short time to recharge
the boost capacitor.
DS52029A-page 12
2011 Microchip Technology Inc.
MCP16323 EVALUATION BOARD
USER’S GUIDE
Appendix A. Schematic and Layouts
A.1 INTRODUCTION
This appendix contains the following schematics and layouts for the MCP16323
Evaluation Board:
• Board – Schematic
• Board – Top Layer
• Board – Top Copper Layer
• Board – Bottom Copper Layer
2011 Microchip Technology Inc.
DS52029A-page 13
MCP16323 Evaluation Board User’s Guide
A.2 BOARD – SCHEMATIC
t u V o
1
1
2
2
2
2
1
1
DS52029A-page 14
2011 Microchip Technology Inc.
Schematic and Layouts
A.3 BOARD – TOP LAYER
A.4 BOARD – TOP COPPER
2011 Microchip Technology Inc.
DS52029A-page 15
MCP16323 Evaluation Board User’s Guide
A.5 BOARD – BOTTOM COPPER
DS52029A-page 16
2011 Microchip Technology Inc.
MCP16323 EVALUATION BOARD
USER’S GUIDE
Appendix B. Bill of Materials
TABLE B-1:
BILL OF MATERIALS (BOM)
Description
Qty Reference
Manufacturer
Part Number
1
C1
CAP 22000pF 25V CERAMIC X7R 0603 AVX Corporation
10%
0603YC104KAT2A
2
2
1
1
C2, C3
C4, C5
L1
CAP 10uF 35V CERAMIC X7R 1210 20% Taiyo Yuden
CAP 22uF 6.3V CERAMIC X7R 1206 10% Murata
XAL6060 4.7uH Shielded Power Inductor Coilcraft
GMK325AB7106MM-T
GCM31CR70J226KE23L
XAL6060-472MEB
PCB
MCP16323 6V to 18V VIN, 3.3V Printed
Circuit Board
Microchip Technology Inc. 104-00427
1
2
1
1
R1
RES 10.0 OHM 1/10W 1% 0603 SMD
RES 10.0K OHM 1/10W 1% 0603 SMD
RES 23.2K OHM 1/10W 1% 0603 SMD
Yageo
Yageo
Yageo
RC0603FR-0710RL
RC0603FR-0710KL
RC0603FR-0723K2L
R2, Rbot
Rtop
U1
MCP16323 High Input Buck Converter
QFN16
Microchip Technology Inc. MCP16323
4
VIN, VOUT, PC TEST POINT COMPACT SMT
GND, GND
Keystone 5016
Note 1: The components listed in this Bill of Materials are representative of the PCB assembly. The
released BOM used in manufacturing uses all RoHS-compliant components.
2011 Microchip Technology Inc.
DS52029A-page 17
Worldwide Sales and Service
AMERICAS
ASIA/PACIFIC
ASIA/PACIFIC
EUROPE
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://www.microchip.com/
support
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Harbour City, Kowloon
Hong Kong
Tel: 852-2401-1200
Fax: 852-2401-3431
India - Bangalore
Tel: 91-80-3090-4444
Fax: 91-80-3090-4123
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11-4160-8632
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
India - Pune
Tel: 91-20-2566-1512
Fax: 91-20-2566-1513
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
Web Address:
www.microchip.com
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Japan - Osaka
Tel: 81-66-152-7160
Fax: 81-66-152-9310
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
China - Beijing
Tel: 86-10-8569-7000
Fax: 86-10-8528-2104
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Japan - Yokohama
Tel: 81-45-471- 6166
Fax: 81-45-471-6122
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Korea - Daegu
Tel: 82-53-744-4301
Fax: 82-53-744-4302
China - Chongqing
Tel: 86-23-8980-9588
Fax: 86-23-8980-9500
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
Korea - Seoul
China - Hangzhou
Tel: 86-571-2819-3187
Fax: 86-571-2819-3189
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
UK - Wokingham
Tel: 44-118-921-5869
Fax: 44-118-921-5820
Cleveland
Independence, OH
Tel: 216-447-0464
Fax: 216-447-0643
China - Hong Kong SAR
Tel: 852-2401-1200
Fax: 852-2401-3431
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Fax: 60-3-6201-9859
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
China - Nanjing
Tel: 86-25-8473-2460
Fax: 86-25-8473-2470
Malaysia - Penang
Tel: 60-4-227-8870
Fax: 60-4-227-4068
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
Detroit
Farmington Hills, MI
Tel: 248-538-2250
Fax: 248-538-2260
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
Indianapolis
Noblesville, IN
Tel: 317-773-8323
Fax: 317-773-5453
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
Taiwan - Hsin Chu
Tel: 886-3-5778-366
Fax: 886-3-5770-955
Los Angeles
China - Shenzhen
Tel: 86-755-8203-2660
Fax: 86-755-8203-1760
Taiwan - Kaohsiung
Tel: 886-7-536-4818
Fax: 886-7-330-9305
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
Taiwan - Taipei
Tel: 886-2-2500-6610
Fax: 886-2-2508-0102
Santa Clara
Santa Clara, CA
Tel: 408-961-6444
Fax: 408-961-6445
China - Xian
Tel: 86-29-8833-7252
Fax: 86-29-8833-7256
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
Toronto
Mississauga, Ontario,
Canada
China - Xiamen
Tel: 905-673-0699
Fax: 905-673-6509
Tel: 86-592-2388138
Fax: 86-592-2388130
China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049
11/29/11
DS52029A-page 18
2011 Microchip Technology Inc.
相关型号：
MCP16323T-150E
18V Input, 3A Output, High Efficiency Synchronous Buck Regulator with Power Good Indication
MICROCHIP
MCP16323T-180E
18V Input, 3A Output, High Efficiency Synchronous Buck Regulator with Power Good Indication
MICROCHIP
MCP16323T-250E
18V Input, 3A Output, High Efficiency Synchronous Buck Regulator with Power Good Indication
MICROCHIP
MCP16323T-330E
18V Input, 3A Output, High Efficiency Synchronous Buck Regulator with Power Good Indication
MICROCHIP
MCP16323T-330E/NG
3 A SWITCHING REGULATOR, 1100 kHz SWITCHING FREQ-MAX, PQCC16, 3 X 3 MM, 0.90 MM HEIGHT, PLASTIC, QFN-16
MICROCHIP
MCP16323T-500E
18V Input, 3A Output, High Efficiency Synchronous Buck Regulator with Power Good Indication
MICROCHIP
MCP16323T-ADJE
18V Input, 3A Output, High Efficiency Synchronous Buck Regulator with Power Good Indication
MICROCHIP
©2020 ICPDF网 联系我们和版权申明