MCP1702T2502ETO [MICROCHIP]
2.5 V FIXED POSITIVE LDO REGULATOR, 1.1 V DROPOUT, PBCY3, LEAD FREE, PLASTIC, TO-93, TO-92, 3-PIN;型号: | MCP1702T2502ETO |
厂家: | MICROCHIP |
描述: | 2.5 V FIXED POSITIVE LDO REGULATOR, 1.1 V DROPOUT, PBCY3, LEAD FREE, PLASTIC, TO-93, TO-92, 3-PIN 输出元件 调节器 |
文件: | 总26页 (文件大小:427K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MCP1702
250 mA Low Quiescent Current LDO Regulator
Features:
Description:
• 2.0 µA Quiescent Current (typical)
The MCP1702 is a family of CMOS low dropout (LDO)
voltage regulators that can deliver up to 250 mA of
current while consuming only 2.0 µA of quiescent
current (typical). The input operating range is specified
from 2.7V to 13.2V, making it an ideal choice for two to
six primary cell battery-powered applications, 9V
alkaline and one or two cell Li-Ion-powered
applications.
• Input Operating Voltage Range: 2.7V to 13.2V
• 250 mA Output Current for Output Voltages 2.5V
• 200 mA Output Current for Output Voltages < 2.5V
• Low Dropout (LDO) Voltage
- 625 mV typical @ 250 mA (VOUT = 2.8V)
• 0.4% Typical Output Voltage Tolerance
• Standard Output Voltage Options:
The MCP1702 is capable of delivering 250 mA with
only 625 mV (typical) of input to output voltage
differential (VOUT = 2.8V). The output voltage tolerance
of the MCP1702 is typically ±0.4% at +25°C and ±3%
maximum over the operating junction temperature
range of -40°C to +125°C. Line regulation is ±0.1%
typical at +25°C.
- 1.2V, 1.5V, 1.8V, 2.5V, 2.8V,
3.0V, 3.3V, 4.0V, 5.0V
• Output Voltage Range 1.2V to 5.5V in 0.1V
Increments (50 mV increments available upon
request)
• Stable with 1.0 µF to 22 µF Output Capacitor
• Short-Circuit Protection
Output voltages available for the MCP1702 range from
1.2V to 5.0V. The LDO output is stable when using only
1 µF of output capacitance. Ceramic, tantalum or
aluminum electrolytic capacitors can all be used for
• Overtemperature Protection
Applications:
input
and
output.
Overcurrent
limit
and
overtemperature shutdown provide a robust solution
for any application.
• Battery-powered Devices
• Battery-powered Alarm Circuits
• Smoke Detectors
Package options include the SOT-23A, SOT-89-3, and
TO-92.
• CO2 Detectors
• Pagers and Cellular Phones
• Smart Battery Packs
Package Types
3-Pin SOT-23A
3-Pin SOT-89
• Low Quiescent Current Voltage Reference
• PDAs
VIN
3
VIN
• Digital Cameras
• Microcontroller Power
• Solar-Powered Instruments
• Consumer Products
MCP1702
MCP1702
2
1
3
1
2
• Battery Powered Data Loggers
GNDVIN VOUT
GND VOUT
Related Literature:
3-Pin TO-92
1 2 3
• AN765, “Using Microchip’s Micropower LDOs”,
DS00765, Microchip Technology Inc., 2002
• AN766, “Pin-Compatible CMOS Upgrades to
Bipolar LDOs”, DS00766,
Microchip Technology Inc., 2002
Bottom
View
• AN792, “A Method to Determine How Much
Power a SOT-23 Can Dissipate in an Application”,
DS00792, Microchip Technology Inc., 2001
GND VIN VOUT
2010 Microchip Technology Inc.
DS22008E-page 1
MCP1702
Functional Block Diagrams
MCP1702
VOUT
VIN
Error Amplifier
+VIN
Voltage
Reference
-
+
Overcurrent
Overtemperature
GND
Typical Application Circuits
MCP1702
VOUT
3.3V
VOUT
GND
VIN
IOUT
50 mA
VIN
COUT
1 µF Ceramic
+
9V
Battery
CIN
1 µF Ceramic
DS22008E-page 2
2010 Microchip Technology Inc.
MCP1702
† Notice: Stresses above those listed under “Maximum
Ratings” may cause permanent damage to the device. This is
a stress rating only and functional operation of the device at
those or any other conditions above those indicated in the
operational listings of this specification is not implied.
Exposure to maximum rating conditions for extended periods
may affect device reliability.
1.0
ELECTRICAL
CHARACTERISTICS
Absolute Maximum Ratings †
V
...............................................................................+14.5V
DD
All inputs and outputs w.r.t. .............(V -0.3V) to (V +0.3V)
SS
IN
Peak Output Current ...................................................500 mA
Storage temperature .....................................-65°C to +150°C
Maximum Junction Temperature................................... 150°C
ESD protection on all pins (HBM;MM) 4 kV; 400V
DC CHARACTERISTICS
Electrical Specifications: Unless otherwise specified, all limits are established for V = V
+ V
, Note 1,
IN
OUT(MAX)
DROPOUT(MAX)
I
= 100 µA, C
= 1 µF (X7R), C = 1 µF (X7R), T = +25°C.
LOAD
OUT IN A
Boldface type applies for junction temperatures, T of -40°C to +125°C. (Note 7)
J
Parameters
Sym
Min
Typ
Max
Units
Conditions
Input / Output Characteristics
Input Operating Voltage
V
I
2.7
—
—
13.2
5
V
Note 1
I = 0 mA
IN
Input Quiescent Current
Maximum Output Current
2.0
—
µA
q
L
I
250
50
—
—
—
—
—
—
mA
mA
mA
mA
mA
mA
For V 2.5V
OUT_mA
R
100
130
200
250
400
For V < 2.5V, V 2.7V
R
IN
100
150
200
—
For V < 2.5V, V 2.95V
R IN
For V < 2.5V, V 3.2V
R
IN
For V < 2.5V, V 3.45V
R
IN
Output Short Circuit Current
Output Voltage Regulation
I
V
= V
(Note 1), V
= GND,
OUT_SC
IN
IN(MIN)
OUT
Current (average current) measured
10 ms after short is applied.
V
V -3.0% V ±0.4% V +3.0%
V
Note 2
OUT
R
R
R
V -2.0% V ±0.4% V +2.0%
V
V
R
R
R
V -1.0% V ±0.4% V +1.0%
1% Custom
R
R
R
V
Temperature
TCV
—
50
—
ppm/°C
Note 3
OUT
OUT
Coefficient
Line Regulation
V
/
-0.3
-2.5
±0.1
±1.0
+0.3
+2.5
%/V
%
(V
+ V
)
OUT
OUT(MAX)
DROPOUT(MAX)
(V
XV
)
V 13.2V, (Note 1)
IN
OUT
IN
Load Regulation
V
/V
I = 1.0 mA to 250 mA for V 2.5V
L R
OUT OUT
I = 1.0 mA to 200 mA for V 2.5V,
L
R
V
= 3.45V (Note 4)
IN
Note 1: The minimum V must meet two conditions: V 2.7V and V V
+ V
.
IN
IN
IN
OUT(MAX)
DROPOUT(MAX)
2:
V is the nominal regulator output voltage. For example: V = 1.2V, 1.5V, 1.8V, 2.5V, 2.8V, 3.0V, 3.3V, 4.0V, or 5.0V. The
R
R
input voltage V = V
+ V
or V = 2.7V (whichever is greater); I
= 100 µA.
IN
OUT(MAX)
DROPOUT(MAX)
6
IN
OUT
3: TCV
= (V
- V
) *10 / (V * Temperature), V
= highest voltage measured over the
OUT-HIGH
OUT
OUT-HIGH
OUT-LOW
R
temperature range. V
= lowest voltage measured over the temperature range.
OUT-LOW
4: Load regulation is measured at a constant junction temperature using low duty cycle pulse testing. Changes in output
voltage due to heating effects are determined using thermal regulation specification TCV
.
OUT
5: Dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its measured
value with an applied input voltage of V + V or 2.7V, whichever is greater.
OUT(MAX)
DROPOUT(MAX)
6: The maximum allowable power dissipation is a function of ambient temperature, the maximum allowable junction
temperature and the thermal resistance from junction to air (i.e., T , T , ). Exceeding the maximum allowable power
A
J
JA
dissipation will cause the device operating junction temperature to exceed the maximum 150°C rating. Sustained
junction temperatures above 150°C can impact the device reliability.
7: The junction temperature is approximated by soaking the device under test at an ambient temperature equal to the
desired Junction temperature. The test time is small enough such that the rise in the Junction temperature over the
ambient temperature is not significant.
2010 Microchip Technology Inc.
DS22008E-page 3
MCP1702
DC CHARACTERISTICS (CONTINUED)
Electrical Specifications: Unless otherwise specified, all limits are established for V = V
+ V
, Note 1,
IN
OUT(MAX)
DROPOUT(MAX)
I
= 100 µA, C
= 1 µF (X7R), C = 1 µF (X7R), T = +25°C.
LOAD
OUT IN A
Boldface type applies for junction temperatures, T of -40°C to +125°C. (Note 7)
J
Parameters
Sym
Min
Typ
Max
Units
Conditions
I = 250 mA, V = 5.0V
Dropout Voltage
(Note 1, Note 5)
V
—
—
—
—
—
330
525
625
750
—
650
725
975
1100
—
mV
mV
mV
mV
mV
DROPOUT
L
R
I = 250 mA, 3.3V V < 5.0V
L
R
I = 250 mA, 2.8V V < 3.3V
L
R
I = 250 mA, 2.5V V < 2.8V
L
R
V
< 2.5V, See Maximum Output
R
Current Parameter
Output Delay Time
Output Noise
T
—
1000
—
µs
V
= 0V to 6V, V
= 90% V
OUT R
DELAY
IN
R = 50 resistive
L
1/2
e
—
—
8
—
—
µV/(Hz)
dB
I = 50 mA, f = 1 kHz, C
= 1 µF
OUT
N
L
Power Supply Ripple
Rejection Ratio
PSRR
44
f = 100 Hz, C
V
V
= 1 µF, I = 50 mA,
OUT L
= 100 mV pk-pk, C = 0 µF,
INAC
IN
= 1.2V
R
Thermal Shutdown
Protection
T
—
150
—
°C
SD
Note 1: The minimum V must meet two conditions: V 2.7V and V V
+ V
.
IN
IN
IN
OUT(MAX)
DROPOUT(MAX)
2:
V is the nominal regulator output voltage. For example: V = 1.2V, 1.5V, 1.8V, 2.5V, 2.8V, 3.0V, 3.3V, 4.0V, or 5.0V. The
R
R
input voltage V = V
+ V
or V = 2.7V (whichever is greater); I
= 100 µA.
IN
OUT(MAX)
DROPOUT(MAX)
6
IN
OUT
3: TCV
= (V
- V
) *10 / (V * Temperature), V
= highest voltage measured over the
OUT-HIGH
OUT
OUT-HIGH
OUT-LOW
R
temperature range. V
= lowest voltage measured over the temperature range.
OUT-LOW
4: Load regulation is measured at a constant junction temperature using low duty cycle pulse testing. Changes in output
voltage due to heating effects are determined using thermal regulation specification TCV
.
OUT
5: Dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its measured
value with an applied input voltage of V + V or 2.7V, whichever is greater.
OUT(MAX)
DROPOUT(MAX)
6: The maximum allowable power dissipation is a function of ambient temperature, the maximum allowable junction
temperature and the thermal resistance from junction to air (i.e., T , T , ). Exceeding the maximum allowable power
A
J
JA
dissipation will cause the device operating junction temperature to exceed the maximum 150°C rating. Sustained
junction temperatures above 150°C can impact the device reliability.
7: The junction temperature is approximated by soaking the device under test at an ambient temperature equal to the
desired Junction temperature. The test time is small enough such that the rise in the Junction temperature over the
ambient temperature is not significant.
DS22008E-page 4
2010 Microchip Technology Inc.
MCP1702
TEMPERATURE SPECIFICATIONS (Note 1)
Parameters
Temperature Ranges
Sym
Min
Typ
Max
Units
Conditions
Operating Junction Temperature Range
Maximum Junction Temperature
Storage Temperature Range
T
T
-40
—
+125
+150
+150
°C
°C
°C
Steady State
J
J
Transient
T
-65
A
Thermal Package Resistance (Note 2)
Thermal Resistance, 3L-SOT-23A
EIA/JEDEC JESD51-7
FR-4 0.063 4-Layer Board
—
—
—
336
110
—
—
—
°C/W
°C/W
°C/W
JA
JC
JA
Thermal Resistance, 3L-SOT-89
Thermal Resistance, 3L-TO-92
EIA/JEDEC JESD51-7
FR-4 0.063 4-Layer Board
153.3
—
—
—
100
131.9
66.3
—
—
—
°C/W
°C/W
°C/W
JC
JA
JC
Note 1: The maximum allowable power dissipation is a function of ambient temperature, the maximum allowable junction
temperature and the thermal resistance from junction to air (i.e., T , T , ). Exceeding the maximum allowable power
A
J
JA
dissipation will cause the device operating junction temperature to exceed the maximum 150°C rating. Sustained
junction temperatures above 150°C can impact the device reliability.
2: Thermal Resistance values are subject to change. Please visit the Microchip web site for the latest packaging
information.
2010 Microchip Technology Inc.
DS22008E-page 5
MCP1702
2.0
TYPICAL PERFORMANCE CURVES
Note:
The graphs and tables provided following this note are a statistical summary based on a limited number of
samples and are provided for informational purposes only. The performance characteristics listed herein
are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified
operating range (e.g., outside specified power supply range) and therefore outside the warranted range.
Note: Unless otherwise indicated: VR = 2.8V, COUT = 1 µF Ceramic (X7R), CIN = 1 µF Ceramic (X7R), IL = 100 µA,
TA = +25°C, VIN = VOUT(MAX) + VDROPOUT(MAX)
.
Note: Junction Temperature (T ) is approximated by soaking the device under test to an ambient temperature equal to the desired junction
J
temperature. The test time is small enough such that the rise in Junction temperature over the Ambient temperature is not significant.
5.00
4.00
3.00
2.00
1.00
0.00
120.00
100.00
80.00
60.00
40.00
20.00
0.00
VOUT = 1.2V
Temperature = +25°C
VOUT = 1.2V
+130°C
0°C
V
IN = 2.7V
+90°C
-45°C
+25°C
2
4
6
8
10
12
14
0
40
80
120
160
200
Input Voltage (V)
Load Current (mA)
FIGURE 2-1:
Quiescent Current vs. Input
FIGURE 2-4:
Ground Current vs. Load
Voltage.
Current.
5.00
4.00
120.00
100.00
80.00
60.00
40.00
20.00
VOUT = 2.8V
Temperature = +25°C
VOUT = 5.0V
+130°C
V
IN = 6.0V
+90°C
-45°C
3.00
+25°C
2.00
1.00
0°C
VOUT = 2.8V
V
IN = 3.8V
0.00
3
0.00
0
5
7
9
11
13
50
100
150
200
250
Input Voltage (V)
Load Current (mA)
FIGURE 2-2:
Quiescent Current vs.Input
FIGURE 2-5:
Ground Current vs. Load
Voltage.
Current.
5.00
4.00
3.00
2.00
3.00
VOUT = 5.0V
IOUT = 0 mA
VOUT = 5.0V
VOUT = 2.8V
VIN = 3.8V
2.50
2.00
1.50
1.00
0.50
0.00
V
IN = 6.0V
+130°C
VOUT = 1.2V
VIN = 2.7V
+90°C
0°C
+25°C
-45°C
1.00
-45
-20
5
30
55
80
105
130
6
7
8
9
10
11
12
13
14
Junction Temperature (°C)
Input Voltage (V)
FIGURE 2-3:
Quiescent Current vs.Input
FIGURE 2-6:
Quiescent Current vs.
Voltage.
Junction Temperature.
DS22008E-page 6
2010 Microchip Technology Inc.
MCP1702
Note: Unless otherwise indicated: VR = 2.8V, COUT = 1 µF Ceramic (X7R), CIN = 1 µF Ceramic (X7R), IL = 100 µA,
TA = +25°C, VIN = VOUT(MAX) + VDROPOUT(MAX)
.
1.24
1.23
1.22
1.21
1.20
1.19
1.18
VOUT = 1.2V
ILOAD = 0.1 mA
VOUT = 1.2V
0°C
1.23
1.22
1.21
1.20
1.19
1.18
-45°C
-45°C
0°C
+25°C
+90°C
+130°C
+130°C
+90°C
10
+25°C
2
4
6
8
12
14
0
20
50
50
40
60
80
100
Input Voltage (V)
Load Current (mA)
FIGURE 2-7:
Voltage.
Output Voltage vs. Input
FIGURE 2-10:
Current.
Output Voltage vs. Load
2.85
2.83
2.82
2.81
2.80
2.79
2.78
VOUT = 2.8V
LOAD = 0.1 mA
VOUT = 2.8V
2.84
2.83
2.82
2.81
2.80
2.79
2.78
2.77
I
+130°C
+130°C
+90°C
+90°C
0°C
0°C
-45°C
+25°C
+25°C
8
-45°C
2.77
3
4
5
6
7
9
10 11 12 13 14
0
100
150
200
250
Input Voltage (V)
Load Current (mA)
FIGURE 2-8:
Voltage.
Output Voltage vs. Input
FIGURE 2-11:
Current.
Output Voltage vs. Load
5.04
5.03
5.02
5.01
5.00
4.99
4.98
VOUT = 5.0V
LOAD = 0.1 mA
VOUT = 5.0V
5.06
5.04
5.02
5.00
4.98
4.96
I
+130°C
+130°C
+90°C
+90°C
0°C
-45°C
0°C
+25°C
+25°C
-45°C
4.97
4.96
6
7
8
9
10
11
12
13
14
0
100
150
200
250
Input Voltage (V)
Load Current (mA)
FIGURE 2-9:
Output Voltage vs. Input
FIGURE 2-12:
Output Voltage vs. Load
Voltage.
Current.
2010 Microchip Technology Inc.
DS22008E-page 7
MCP1702
Note: Unless otherwise indicated: VR = 2.8V, COUT = 1 µF Ceramic (X7R), CIN = 1 µF Ceramic (X7R), IL = 100 µA,
TA = +25°C, VIN = VOUT(MAX) + VDROPOUT(MAX)
.
1.40
VOUT = 1.8V
+130°C
1.30
1.20
1.10
1.00
0.90
0.80
0.70
0.60
+90°C
+25°C
0°C
-45°C
100
120
140
160
180
200
Load Current (mA)
FIGURE 2-13:
Dropout Voltage vs. Load
FIGURE 2-16:
Dynamic Line Response.
Current.
1.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00
VOUT = 2.8V
+130°C
+90°C
+25°C
+0°C
-45°C
0
25 50 75 100 125 150 175 200 225 250
Load Current (mA)
FIGURE 2-17:
Dynamic Line Response.
FIGURE 2-14:
Dropout Voltage vs. Load
Current.
600.00
500.00
400.00
300.00
200.00
100.00
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
VOUT = 2.8V
VOUT = 5.0V
ROUT < 0.1ꢀ
+130°C
+90°C
+25°C
+0°C
-45°C
0.00
4
6
8
10
12
14
0
25 50 75 100 125 150 175 200 225 250
Load Current (mA)
Input Voltage (V)
FIGURE 2-18:
Input Voltage.
Short Circuit Current vs.
FIGURE 2-15:
Current.
Dropout Voltage vs. Load
DS22008E-page 8
2010 Microchip Technology Inc.
MCP1702
Note: Unless otherwise indicated: VR = 2.8V, COUT = 1 µF Ceramic (X7R), CIN = 1 µF Ceramic (X7R), IL = 100 µA,
TA = +25°C, VIN = VOUT(MAX) + VDROPOUT(MAX)
.
0.20
0.15
0.10
0.05
0.00
0.20
0.16
0.12
0.08
0.04
0.00
VIN = 6V
VOUT = 1.2V
IN = 2.7V to 13.2V
V
1 mA
-0.05
VIN = 4V
-0.10
-0.15
-0.20
-0.25
-0.30
VIN = 10V
VIN = 12V
0 mA
VIN = 13.2V
100 mA
80
VOUT = 1.2V
LOAD = 0.1 mA to 200 mA
I
-45
-20
5
30
55
80
105
130
-45
-20
5
30
55
105
130
Temperature (°C)
Temperature (°C)
FIGURE 2-19:
Load Regulation vs.
FIGURE 2-22:
Line Regulation vs.
Temperature.
Temperature.
0.40
0.30
0.20
0.20
VOUT = 2.8V
LOAD = 1 mA to 250 mA
VOUT = 2.8V
VIN = 3.8V to 13.2V
I
0.16
0.12
0.08
0.04
0.00
250 mA
0.10
0.00
200 mA
-0.10
-0.20
-0.30
-0.40
-0.50
-0.60
VIN = 6V
VIN = 10V
VIN = 3.8V
0 mA
100 mA
VIN = 13.2V
-45
-20
5
30
55
80
105
130
-45
-20
5
30
55
80
105
130
Temperature (°C)
Temperature (°C)
FIGURE 2-20:
Load Regulation vs.
FIGURE 2-23:
Line Regulation vs.
Temperature.
Temperature.
0.40
0.30
0.20
0.10
0.16
VOUT = 5.0V
LOAD = 1 mA to 250 mA
VOUT = 5.0V
VIN = 6.0V to 13.2V
I
0.14
0.12
0.10
0.08
0.06
VIN = 6V
200 mA
250 mA
0 mA
VIN = 10V
VIN = 8V
0.00
100 mA
VIN = 13.2V
105
-0.10
-45
-20
5
30
55
80
130
-45
-20
5
30
55
80
105
130
Temperature (°C)
Temperature (°C)
FIGURE 2-21:
Load Regulation vs.
FIGURE 2-24:
Line Regulation vs.
Temperature.
Temperature.
2010 Microchip Technology Inc.
DS22008E-page 9
MCP1702
Note: Unless otherwise indicated: VR = 2.8V, COUT = 1 µF Ceramic (X7R), CIN = 1 µF Ceramic (X7R), IL = 100 µA,
TA = +25°C, VIN = VOUT(MAX) + VDROPOUT(MAX)
.
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
VR=1.2V
COUT=1.0 μF ceramic X7R
VIN=2.7V
CIN=0 μF
IOUT=1.0 mA
0.01
0.1
1
10
100
1000
Frequency (kHz)
FIGURE 2-25:
Rejection vs. Frequency.
Power Supply Ripple
FIGURE 2-28:
FIGURE 2-29:
FIGURE 2-30:
Power Up Timing.
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
VR=5.0V
OUT=1.0 μF ceramic X7R
VIN=6.0V
IN=0 μF
OUT=1.0 mA
C
C
I
0.01
0.1
1
10
100
1000
Frequency (kHz)
Dynamic Load Response.
FIGURE 2-26:
Rejection vs. Frequency.
Power Supply Ripple
100
IOUT=50 mA
VR=5.0V, VIN=6.0V
10
1
VR=2,8V, VIN=3.8V
VR=1.2V, VIN=2.7V
0.1
0.01
0.001
0.01
0.1
1
10
100
1000
Frequency (kHz)
Dynamic Load Response.
FIGURE 2-27:
Output Noise vs. Frequency.
DS22008E-page 10
2010 Microchip Technology Inc.
MCP1702
3.0
PIN DESCRIPTIONS
The descriptions of the pins are listed in Table 3-1.
TABLE 3-1:
PIN FUNCTION TABLE
Pin No.
SOT-23A
Pin No.
SOT-89
Pin No.
TO-92
Symbol
Function
1
2
3
–
1
1
3
2
–
GND
VOUT
VIN
Ground Terminal
3
2, Tab
–
Regulated Voltage Output
Unregulated Supply Voltage
No connection
NC
3.1
Ground Terminal (GND)
3.3
Unregulated Input Voltage Pin
(V )
IN
Regulator ground. Tie GND to the negative side of the
output and the negative side of the input capacitor.
Only the LDO bias current (2.0 µA typical) flows out of
this pin; there is no high current. The LDO output
regulation is referenced to this pin. Minimize voltage
drops between this pin and the negative side of the
load.
Connect VIN to the input unregulated source voltage.
Like all LDO linear regulators, low source impedance is
necessary for the stable operation of the LDO. The
amount of capacitance required to ensure low source
impedance will depend on the proximity of the input
source capacitors or battery type. For most
applications, 1 µF of capacitance will ensure stable
operation of the LDO circuit. For applications that have
load currents below 100 mA, the input capacitance
requirement can be lowered. The type of capacitor
used can be ceramic, tantalum or aluminum
electrolytic. The low ESR characteristics of the ceramic
will yield better noise and PSRR performance at
high-frequency.
3.2
Regulated Output Voltage (V
)
OUT
Connect VOUT to the positive side of the load and the
positive terminal of the output capacitor. The positive
side of the output capacitor should be physically
located as close to the LDO VOUT pin as is practical.
The current flowing out of this pin is equal to the DC
load current.
2010 Microchip Technology Inc.
DS22008E-page 11
MCP1702
4.0
4.1
DETAILED DESCRIPTION
Output Regulation
4.3
Overtemperature
A portion of the LDO output voltage is fed back to the
internal error amplifier and compared with the precision
internal band gap reference. The error amplifier output
will adjust the amount of current that flows through the
P-Channel pass transistor, thus regulating the output
voltage to the desired value. Any changes in input
voltage or output current will cause the error amplifier
to respond and adjust the output voltage to the target
voltage (refer to Figure 4-1).
The internal power dissipation within the LDO is a
function of input-to-output voltage differential and load
current. If the power dissipation within the LDO is
excessive, the internal junction temperature will rise
above the typical shutdown threshold of 150°C. At that
point, the LDO will shut down and begin to cool to the
typical turn-on junction temperature of 130°C. If the
power dissipation is low enough, the device will
continue to cool and operate normally. If the power
dissipation remains high, the thermal shutdown
protection circuitry will again turn off the LDO,
protecting it from catastrophic failure.
4.2
Overcurrent
The MCP1702 internal circuitry monitors the amount of
current flowing through the P-Channel pass transistor.
In the event of a short-circuit or excessive output
current, the MCP1702 will turn off the P-Channel
device for a short period, after which the LDO will
attempt to restart. If the excessive current remains, the
cycle will repeat itself.
MCP1702
VOUT
VIN
Error Amplifier
+VIN
Voltage
Reference
-
+
Overcurrent
Overtemperature
GND
FIGURE 4-1:
Block Diagram.
DS22008E-page 12
2010 Microchip Technology Inc.
MCP1702
5.2
Output
5.0
FUNCTIONAL DESCRIPTION
The maximum rated continuous output current for the
MCP1702 is 250 mA (VR 2.5V). For applications
where VR < 2.5V, the maximum output current is
200 mA.
The MCP1702 CMOS LDO linear regulator is intended
for applications that need the lowest current
consumption while maintaining output voltage
regulation. The operating continuous load range of the
MCP1702 is from 0 mA to 250 mA (VR 2.5V). The
input operating voltage range is from 2.7V to 13.2V,
making it capable of operating from two or more
alkaline cells or single and multiple Li-Ion cell batteries.
A minimum output capacitance of 1.0 µF is required for
small signal stability in applications that have up to
250 mA output current capability. The capacitor type
can be ceramic, tantalum or aluminum electrolytic. The
esr range on the output capacitor can range from 0 to
2.0.
5.1
Input
The output capacitor range for ceramic capacitors is
1 µF to 22 µF. Higher output capacitance values may
be used for tantalum and electrolytic capacitors. Higher
output capacitor values pull the pole of the LDO
transfer function inward that results in higher phase
shifts which in turn cause a lower crossover frequency.
The circuit designer should verify the stability by
applying line step and load step testing to their system
when using capacitance values greater than 22 µF.
The input of the MCP1702 is connected to the source
of the P-Channel PMOS pass transistor. As with all
LDO circuits, a relatively low source impedance (10)
is needed to prevent the input impedance from causing
the LDO to become unstable. The size and type of the
capacitor needed depends heavily on the input source
type (battery, power supply) and the output current
range of the application. For most applications (up to
100 mA), a 1 µF ceramic capacitor will be sufficient to
ensure circuit stability. Larger values can be used to
improve circuit AC performance.
5.3
Output Rise Time
When powering up the internal reference output, the
typical output rise time of 500 µs is controlled to
prevent overshoot of the output voltage. There is also a
start-up delay time that ranges from 300 µs to 800 µs
based on loading. The start-up time is separate from
and precedes the Output Rise Time. The total output
delay is the Start-up Delay plus the Output Rise time.
2010 Microchip Technology Inc.
DS22008E-page 13
MCP1702
EQUATION 6-2:
TJMAX = PTOTAL RJA + TAMAX
6.0
APPLICATION CIRCUITS AND
ISSUES
Where:
6.1
Typical Application
TJ(MAX)
=
=
Maximum continuous junction
temperature
The MCP1702 is most commonly used as a voltage
regulator. Its low quiescent current and low dropout
voltage makes it ideal for many battery-powered
applications.
PTOTAL
Total device power dissipation
RJA
Thermal resistance from
junction to ambient
TAMAX
=
Maximum ambient temperature
MCP1702
V
IN
The maximum power dissipation capability for a
package can be calculated given the junction-to-
ambient thermal resistance and the maximum ambient
temperature for the application. The following equation
can be used to determine the package maximum
internal power dissipation.
GND
(2.8V to 3.2V)
V
OUT
V
IN
1.8V
C
IN
V
OUT
1 µF Ceramic
I
OUT
C
OUT
150 mA
1 µF Ceramic
EQUATION 6-3:
FIGURE 6-1:
Typical Application Circuit.
TJMAX – TAMAX
6.1.1
APPLICATION INPUT CONDITIONS
Package Type = SOT-23A
PDMAX = ---------------------------------------------------
RJA
Where:
Input Voltage Range = 2.8V to 3.2V
VIN maximum = 3.2V
PD(MAX)
=
=
Maximum device power
dissipation
VOUT typical = 1.8V
TJ(MAX)
Maximum continuous junction
temperature
IOUT = 150 mA maximum
TA(MAX)
Maximum ambient temperature
6.2
6.2.1
Power Calculations
RJA
=
Thermal resistance from
junction to ambient
POWER DISSIPATION
The internal power dissipation of the MCP1702 is a
function of input voltage, output voltage and output
current. The power dissipation, as a result of the
quiescent current draw, is so low, it is insignificant
(2.0 µA x VIN). The following equation can be used to
calculate the internal power dissipation of the LDO.
EQUATION 6-4:
TJRISE = PDMAX RJA
Where:
TJ(RISE)
=
=
Rise in device junction
temperature over the ambient
temperature
EQUATION 6-1:
PLDO = VINMAX – VOUTMIN IOUTMAX
PTOTAL
Maximum device power
dissipation
Where:
RJA
Thermal resistance from
junction to ambient
PLDO
=
LDO Pass device internal
power dissipation
VIN(MAX)
=
=
Maximum input voltage
EQUATION 6-5:
VOUT(MIN)
LDO minimum output voltage
TJ = TJRISE + TA
The maximum continuous operating junction
temperature specified for the MCP1702 is +125°C. To
estimate the internal junction temperature of the
MCP1702, the total internal power dissipation is
multiplied by the thermal resistance from junction to
ambient (RJA). The thermal resistance from junction to
ambient for the SOT-23A pin package is estimated at
336°C/W.
Where:
TJ
=
=
Junction Temperature
TJ(RISE)
Rise in device junction
temperature over the ambient
temperature
TA
Ambient temperature
DS22008E-page 14
2010 Microchip Technology Inc.
MCP1702
6.3
Voltage Regulator
Junction Temperature Estimate
Internal power dissipation, junction temperature rise,
junction temperature and maximum power dissipation
are calculated in the following example. The power
dissipation, as a result of ground current, is small
enough to be neglected.
To estimate the internal junction temperature, the
calculated temperature rise is added to the ambient or
offset temperature. For this example, the worst-case
junction temperature is estimated below.
TJ
TJ
=
=
TJRISE + TA(MAX)
113.3°C
6.3.1
POWER DISSIPATION EXAMPLE
Package
Maximum Package Power Dissipation at +40°C
Ambient Temperature Assuming Minimal Copper
Usage.
Package Type
Input Voltage
VIN
=
=
SOT-23A
2.8V to 3.2V
SOT-23 (336.0°C/Watt = RJA
)
LDO Output Voltages and Currents
PD(MAX)
PD(MAX)
=
=
(+125°C - 40°C) / 336°C/W
253 milli-Watts
VOUT
IOUT
=
=
1.8V
150 mA
SOT-89 (153.3°C/Watt = RJA
)
Maximum Ambient Temperature
TA(MAX) +40°C
PD(MAX)
PD(MAX)
=
=
(+125°C - 40°C) / 153.3°C/W
0.554 Watts
=
Internal Power Dissipation
TO92 (131.9°C/Watt = RJA
)
Internal Power dissipation is the product of the LDO
output current times the voltage across the LDO
(VIN to VOUT).
PD(MAX)
PD(MAX)
=
=
(+125°C - 40°C) / 131.9°C/W
644 milli-Watts
PLDO(MAX)
=
(VIN(MAX) - VOUT(MIN)) x
IOUT(MAX)
6.4
Voltage Reference
The MCP1702 can be used not only as a regulator, but
also as a low quiescent current voltage reference. In
many microcontroller applications, the initial accuracy
of the reference can be calibrated using production test
equipment or by using a ratio measurement. When the
initial accuracy is calibrated, the thermal stability and
line regulation tolerance are the only errors introduced
by the MCP1702 LDO. The low-cost, low quiescent
current and small ceramic output capacitor are all
advantages when using the MCP1702 as a voltage
reference.
PLDO
PLDO
=
=
(3.2V - (0.97 x 1.8V)) x 150 mA
218.1 milli-Watts
Device Junction Temperature Rise
The internal junction temperature rise is a function of
internal power dissipation and the thermal resistance
from junction to ambient for the application. The
thermal resistance from junction to ambient (RJA) is
derived from an EIA/JEDEC standard for measuring
thermal resistance for small surface mount packages.
The EIA/JEDEC specification is JESD51-7, “High
Effective Thermal Conductivity Test Board for Leaded
Surface Mount Packages”. The standard describes the
test method and board specifications for measuring the
thermal resistance from junction to ambient. The actual
thermal resistance for a particular application can vary
depending on many factors, such as copper area and
thickness. Refer to AN792, “A Method to Determine
How Much Power a SOT-23 Can Dissipate in an
Application”, (DS00792), for more information
regarding this subject.
Ratio Metric Reference
®
2 µA Bias
MCP1702
PIC
Microcontroller
V
IN
C
1 µF
IN
V
REF
V
OUT
C
1 µF
OUT
GND
ADO
AD1
Bridge Sensor
TJ(RISE)
TJRISE
TJRISE
=
=
=
PTOTAL x RqJA
218.1 milli-Watts x 336.0°C/Watt
73.3°C
FIGURE 6-2:
Voltage Reference.
Using the MCP1702 as a
2010 Microchip Technology Inc.
DS22008E-page 15
MCP1702
6.5
Pulsed Load Applications
For some applications, there are pulsed load current
events that may exceed the specified 250 mA
maximum specification of the MCP1702. The internal
current limit of the MCP1702 will prevent high peak
load demands from causing non-recoverable damage.
The 250 mA rating is a maximum average continuous
rating. As long as the average current does not exceed
250 mA, pulsed higher load currents can be applied to
the MCP1702. The typical current limit for the
MCP1702 is 500 mA (TA +25°C).
DS22008E-page 16
2010 Microchip Technology Inc.
MCP1702
7.0
7.1
PACKAGING INFORMATION
Package Marking Information
3-Pin SOT-23A
Example:
Standard
Extended Temp
Symbol
Voltage *
Symbol
Voltage *
HA
HB
HC
HD
HE
1.2
1.5
1.8
2.5
2.8
HF
HG
HH
HJ
—
3.0
3.3
4.0
5.0
—
HANN
XXNN
Custom
GA
GB
4.5
2.2
GC
GD
2.1
4.1
* Custom output voltages available upon request.
Contact your local Microchip sales office for more information.
Standard
3-Lead SOT-89
Example:
Extended Temp
Symbol
Voltage *
Symbol
Voltage *
HA
HB
HC
HD
HE
1.2
1.5
1.8
2.5
2.8
HF
HG
HK
HH
HJ
3.0
3.3
3.6
4.0
5.0
XXXYYWW
NNN
HA1014
256
Custom
LA
LB
2.1
3.2
H9
—
4.2
—
3-Lead TO-92
Example:
* Custom output voltages available upon request.
Contact your local Microchip sales office for more information.
1702
XXXXXX
XXXXXX
XXXXXX
YWWNNN
1202E
e
3
TO^
014256
Legend: XX...X Customer-specific information
Y
Year code (last digit of calendar year)
YY
WW
NNN
Year code (last 2 digits of calendar year)
Week code (week of January 1 is week ‘01’)
Alphanumeric traceability code
e
3
Pb-free JEDEC designator for Matte Tin (Sn)
This package is Pb-free. The Pb-free JEDEC designator (
can be found on the outer packaging for this package.
*
)
e
3
Note: In the event the full Microchip part number cannot be marked on one line, it will
be carried over to the next line, thus limiting the number of available
characters for customer-specific information.
2010 Microchip Technology Inc.
DS22008E-page 17
MCP1702
ꢀꢁꢂꢃꢄꢅꢆꢇꢈꢄꢉꢊꢋꢌꢆꢍꢎꢄꢈꢈꢆꢏꢐꢊꢈꢋꢑꢃꢆꢒꢓꢄꢑꢉꢋꢉꢊꢔꢓꢆꢕꢖꢗꢘꢆꢙꢍꢏꢒꢁꢚꢀꢛꢜ
ꢝꢔꢊꢃ .ꢇꢍꢈ#ꢌꢅꢈꢄꢇ #ꢈꢊ$ꢍꢍꢅꢆ#ꢈꢎꢉꢊ/ꢉꢓꢅꢈ!ꢍꢉ-ꢃꢆꢓ 0ꢈꢎꢋꢅꢉ ꢅꢈ ꢅꢅꢈ#ꢌꢅꢈꢏꢃꢊꢍꢇꢊꢌꢃꢎꢈ1ꢉꢊ/ꢉꢓꢃꢆꢓꢈꢕꢎꢅꢊꢃ%ꢃꢊꢉ#ꢃꢇꢆꢈꢋꢇꢊꢉ#ꢅ!ꢈꢉ#ꢈ
ꢌ##ꢎ+22---ꢁꢄꢃꢊꢍꢇꢊꢌꢃꢎꢁꢊꢇꢄ2ꢎꢉꢊ/ꢉꢓꢃꢆꢓ
D
e1
e
2
1
E
E1
N
b
c
A
φ
A2
L
A1
3ꢆꢃ#
ꢏꢙ44ꢙꢏ"ꢗ"ꢚꢕ
ꢂꢃꢄꢅꢆ ꢃꢇꢆꢈ4ꢃꢄꢃ#
ꢏꢙ5
56ꢏ
ꢏꢔ7
5$ꢄ8ꢅꢍꢈꢇ%ꢈ1ꢃꢆ
4ꢅꢉ!ꢈ1ꢃ#ꢊꢌ
5
ꢅ
ꢛ
ꢐꢁꢜ(ꢈ)ꢕ*
6$# ꢃ!ꢅꢈ4ꢅꢉ!ꢈ1ꢃ#ꢊꢌ
6,ꢅꢍꢉꢋꢋꢈ9ꢅꢃꢓꢌ#
ꢏꢇꢋ!ꢅ!ꢈ1ꢉꢊ/ꢉꢓꢅꢈꢗꢌꢃꢊ/ꢆꢅ
ꢕ#ꢉꢆ!ꢇ%%
ꢅꢀ
ꢔ
ꢔꢑ
ꢔꢀ
"
"ꢀ
ꢂ
4
ꢀꢁꢜꢐꢈ)ꢕ*
ꢐꢁ:ꢜ
ꢐꢁꢜꢐ
ꢐꢁꢐꢐ
ꢑꢁꢀꢐ
ꢀꢁꢑꢐ
ꢑꢁꢒꢐ
ꢐꢁꢀ(
ꢐꢝ
M
M
M
M
M
M
M
M
M
M
ꢀꢁꢖ(
ꢀꢁꢛꢐ
ꢐꢁꢀ(
ꢛꢁꢐꢐ
ꢀꢁ:ꢐ
ꢛꢁꢀꢐ
ꢐꢁ=ꢐ
ꢛꢐꢝ
6,ꢅꢍꢉꢋꢋꢈ<ꢃ!#ꢌ
ꢏꢇꢋ!ꢅ!ꢈ1ꢉꢊ/ꢉꢓꢅꢈ<ꢃ!#ꢌ
6,ꢅꢍꢉꢋꢋꢈ4ꢅꢆꢓ#ꢌ
.ꢇꢇ#ꢈ4ꢅꢆꢓ#ꢌ
.ꢇꢇ#ꢈꢔꢆꢓꢋꢅ
4ꢅꢉ!ꢈꢗꢌꢃꢊ/ꢆꢅ
4ꢅꢉ!ꢈ<ꢃ!#ꢌ
ꢀ
ꢊ
8
ꢐꢁꢐꢜ
ꢐꢁꢛꢐ
ꢐꢁꢑ=
ꢐꢁ(ꢀ
ꢝꢔꢊꢃꢉ
ꢀꢁ ꢂꢃꢄꢅꢆ ꢃꢇꢆ ꢈꢂꢈꢉꢆ!ꢈ"ꢀꢈ!ꢇꢈꢆꢇ#ꢈꢃꢆꢊꢋ$!ꢅꢈꢄꢇꢋ!ꢈ%ꢋꢉ ꢌꢈꢇꢍꢈꢎꢍꢇ#ꢍ$ ꢃꢇꢆ ꢁꢈꢏꢇꢋ!ꢈ%ꢋꢉ ꢌꢈꢇꢍꢈꢎꢍꢇ#ꢍ$ ꢃꢇꢆ ꢈ ꢌꢉꢋꢋꢈꢆꢇ#ꢈꢅ&ꢊꢅꢅ!ꢈꢐꢁꢀꢑꢒꢈꢄꢄꢈꢎꢅꢍꢈ ꢃ!ꢅꢁ
ꢑꢁ ꢂꢃꢄꢅꢆ ꢃꢇꢆꢃꢆꢓꢈꢉꢆ!ꢈ#ꢇꢋꢅꢍꢉꢆꢊꢃꢆꢓꢈꢎꢅꢍꢈꢔꢕꢏ"ꢈ'ꢀꢖꢁ(ꢏꢁ
)ꢕ*+ )ꢉ ꢃꢊꢈꢂꢃꢄꢅꢆ ꢃꢇꢆꢁꢈꢗꢌꢅꢇꢍꢅ#ꢃꢊꢉꢋꢋꢘꢈꢅ&ꢉꢊ#ꢈ,ꢉꢋ$ꢅꢈ ꢌꢇ-ꢆꢈ-ꢃ#ꢌꢇ$#ꢈ#ꢇꢋꢅꢍꢉꢆꢊꢅ ꢁ
ꢏꢃꢊꢍꢇꢊꢌꢃꢎ ꢗꢅꢊꢌꢆꢇꢋꢇꢓꢘ ꢂꢍꢉ-ꢃꢆꢓ *ꢐꢖꢞꢀꢛꢐ)
DS22008E-page 18
2010 Microchip Technology Inc.
MCP1702
Note: For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging
2010 Microchip Technology Inc.
DS22008E-page 19
MCP1702
ꢀꢁꢂꢃꢄꢅꢆꢇꢈꢄꢉꢊꢋꢌꢆꢍꢎꢄꢈꢈꢆꢏꢐꢊꢈꢋꢑꢃꢆꢒꢓꢄꢑꢉꢋꢉꢊꢔꢓꢆ!ꢃꢄꢅꢃꢓꢆꢕ"ꢗꢘꢆꢙꢍꢏꢒꢁ#$ꢜ
ꢝꢔꢊꢃ .ꢇꢍꢈ#ꢌꢅꢈꢄꢇ #ꢈꢊ$ꢍꢍꢅꢆ#ꢈꢎꢉꢊ/ꢉꢓꢅꢈ!ꢍꢉ-ꢃꢆꢓ 0ꢈꢎꢋꢅꢉ ꢅꢈ ꢅꢅꢈ#ꢌꢅꢈꢏꢃꢊꢍꢇꢊꢌꢃꢎꢈ1ꢉꢊ/ꢉꢓꢃꢆꢓꢈꢕꢎꢅꢊꢃ%ꢃꢊꢉ#ꢃꢇꢆꢈꢋꢇꢊꢉ#ꢅ!ꢈꢉ#ꢈ
ꢌ##ꢎ+22---ꢁꢄꢃꢊꢍꢇꢊꢌꢃꢎꢁꢊꢇꢄ2ꢎꢉꢊ/ꢉꢓꢃꢆꢓ
D
D1
E
H
L
N
1
2
b
b1
b1
e
E1
e1
A
C
3ꢆꢃ#
ꢏꢙ44ꢙꢏ"ꢗ"ꢚꢕ
ꢂꢃꢄꢅꢆ ꢃꢇꢆꢈ4ꢃꢄꢃ#
ꢏꢙ5
ꢏꢔ7
5$ꢄ8ꢅꢍꢈꢇ%ꢈ4ꢅꢉ!
1ꢃ#ꢊꢌ
6$# ꢃ!ꢅꢈ4ꢅꢉ!ꢈ1ꢃ#ꢊꢌ
6,ꢅꢍꢉꢋꢋꢈ9ꢅꢃꢓꢌ#
6,ꢅꢍꢉꢋꢋꢈ<ꢃ!#ꢌ
ꢏꢇꢋ!ꢅ!ꢈ1ꢉꢊ/ꢉꢓꢅꢈ<ꢃ!#ꢌꢈꢉ#ꢈ)ꢉ ꢅ
ꢏꢇꢋ!ꢅ!ꢈ1ꢉꢊ/ꢉꢓꢅꢈ<ꢃ!#ꢌꢈꢉ#ꢈꢗꢇꢎ
6,ꢅꢍꢉꢋꢋꢈ4ꢅꢆꢓ#ꢌ
ꢗꢉ8ꢈ4ꢅꢆꢓ#ꢌ
.ꢇꢇ#ꢈ4ꢅꢆꢓ#ꢌ
4ꢅꢉ!ꢈꢗꢌꢃꢊ/ꢆꢅ
4ꢅꢉ!ꢈꢑꢈ<ꢃ!#ꢌ
5
ꢅ
ꢅꢀ
ꢔ
9
"
"ꢀ
ꢂ
ꢂꢀ
4
ꢊ
8
ꢛ
ꢀꢁ(ꢐꢈ)ꢕ*
ꢛꢁꢐꢐꢈ)ꢕ*
ꢀꢁꢖꢐ
ꢛꢁꢜꢖ
ꢑꢁꢑꢜ
ꢑꢁꢀꢛ
ꢖꢁꢛꢜ
ꢀꢁꢖꢐ
ꢐꢁꢒꢜ
ꢐꢁꢛ(
ꢐꢁꢖꢀ
ꢐꢁꢛ=
ꢀꢁ=ꢐ
ꢖꢁꢑ(
ꢑꢁ=ꢐ
ꢑꢁꢑꢜ
ꢖꢁ=ꢐ
ꢀꢁ:ꢛ
ꢀꢁꢑꢐ
ꢐꢁꢖꢖ
ꢐꢁ(=
ꢐꢁꢖ:
4ꢅꢉ! ꢈꢀꢈ?ꢈꢛꢈ<ꢃ!#ꢌ
8ꢀ
ꢝꢔꢊꢃꢉ
ꢀꢁ ꢂꢃꢄꢅꢆ ꢃꢇꢆ ꢈꢂꢈꢉꢆ!ꢈ"ꢈ!ꢇꢈꢆꢇ#ꢈꢃꢆꢊꢋ$!ꢅꢈꢄꢇꢋ!ꢈ%ꢋꢉ ꢌꢈꢇꢍꢈꢎꢍꢇ#ꢍ$ ꢃꢇꢆ ꢁꢈꢏꢇꢋ!ꢈ%ꢋꢉ ꢌꢈꢇꢍꢈꢎꢍꢇ#ꢍ$ ꢃꢇꢆ ꢈ ꢌꢉꢋꢋꢈꢆꢇ#ꢈꢅ&ꢊꢅꢅ!ꢈꢐꢁꢀꢑꢒꢈꢄꢄꢈꢎꢅꢍꢈ ꢃ!ꢅꢁ
ꢑꢁ ꢂꢃꢄꢅꢆ ꢃꢇꢆꢃꢆꢓꢈꢉꢆ!ꢈ#ꢇꢋꢅꢍꢉꢆꢊꢃꢆꢓꢈꢎꢅꢍꢈꢔꢕꢏ"ꢈ'ꢀꢖꢁ(ꢏꢁ
)ꢕ*+ )ꢉ ꢃꢊꢈꢂꢃꢄꢅꢆ ꢃꢇꢆꢁꢈꢗꢌꢅꢇꢍꢅ#ꢃꢊꢉꢋꢋꢘꢈꢅ&ꢉꢊ#ꢈ,ꢉꢋ$ꢅꢈ ꢌꢇ-ꢆꢈ-ꢃ#ꢌꢇ$#ꢈ#ꢇꢋꢅꢍꢉꢆꢊꢅ ꢁ
ꢏꢃꢊꢍꢇꢊꢌꢃꢎ ꢗꢅꢊꢌꢆꢇꢋꢇꢓꢘ ꢂꢍꢉ-ꢃꢆꢓ *ꢐꢖꢞꢐꢑꢜ)
DS22008E-page 20
2010 Microchip Technology Inc.
MCP1702
Note: For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging
2010 Microchip Technology Inc.
DS22008E-page 21
MCP1702
ꢀꢁꢂꢃꢄꢅꢆꢇꢈꢄꢉꢊꢋꢌꢆꢒꢓꢄꢑꢉꢋꢉꢊꢔꢓꢆꢏꢐꢊꢈꢋꢑꢃꢆꢕꢒꢏꢘꢆꢙꢒꢏꢁ$ꢚꢜ
ꢝꢔꢊꢃ .ꢇꢍꢈ#ꢌꢅꢈꢄꢇ #ꢈꢊ$ꢍꢍꢅꢆ#ꢈꢎꢉꢊ/ꢉꢓꢅꢈ!ꢍꢉ-ꢃꢆꢓ 0ꢈꢎꢋꢅꢉ ꢅꢈ ꢅꢅꢈ#ꢌꢅꢈꢏꢃꢊꢍꢇꢊꢌꢃꢎꢈ1ꢉꢊ/ꢉꢓꢃꢆꢓꢈꢕꢎꢅꢊꢃ%ꢃꢊꢉ#ꢃꢇꢆꢈꢋꢇꢊꢉ#ꢅ!ꢈꢉ#ꢈ
ꢌ##ꢎ+22---ꢁꢄꢃꢊꢍꢇꢊꢌꢃꢎꢁꢊꢇꢄ2ꢎꢉꢊ/ꢉꢓꢃꢆꢓ
ꢈ
E
A
N
1
L
1
2
3
b
e
c
D
R
3ꢆꢃ#
ꢙ5*9"ꢕ
ꢂꢃꢄꢅꢆ ꢃꢇꢆꢈ4ꢃꢄꢃ#
ꢏꢙ5
ꢏꢔ7
5$ꢄ8ꢅꢍꢈꢇ%ꢈ1ꢃꢆ
1ꢃ#ꢊꢌ
5
ꢅ
ꢛ
ꢁꢐ(ꢐꢈ)ꢕ*
)ꢇ##ꢇꢄꢈ#ꢇꢈ1ꢉꢊ/ꢉꢓꢅꢈ.ꢋꢉ#
6,ꢅꢍꢉꢋꢋꢈ<ꢃ!#ꢌ
6,ꢅꢍꢉꢋꢋꢈ4ꢅꢆꢓ#ꢌ
ꢏꢇꢋ!ꢅ!ꢈ1ꢉꢊ/ꢉꢓꢅꢈꢚꢉ!ꢃ$
ꢗꢃꢎꢈ#ꢇꢈꢕꢅꢉ#ꢃꢆꢓꢈ1ꢋꢉꢆꢅ
4ꢅꢉ!ꢈꢗꢌꢃꢊ/ꢆꢅ
ꢂ
"
ꢔ
ꢚ
4
ꢁꢀꢑ(
ꢁꢀꢒ(
ꢁꢀꢒꢐ
ꢁꢐ:ꢐ
ꢁ(ꢐꢐ
ꢁꢐꢀꢖ
ꢁꢐꢀꢖ
ꢁꢀ=(
ꢁꢑꢐ(
ꢁꢑꢀꢐ
ꢁꢀꢐ(
M
ꢊ
8
ꢁꢐꢑꢀ
ꢁꢐꢑꢑ
4ꢅꢉ!ꢈ<ꢃ!#ꢌ
ꢝꢔꢊꢃꢉ
ꢀꢁ ꢂꢃꢄꢅꢆ ꢃꢇꢆ ꢈꢔꢈꢉꢆ!ꢈ"ꢈ!ꢇꢈꢆꢇ#ꢈꢃꢆꢊꢋ$!ꢅꢈꢄꢇꢋ!ꢈ%ꢋꢉ ꢌꢈꢇꢍꢈꢎꢍꢇ#ꢍ$ ꢃꢇꢆ ꢁꢈꢏꢇꢋ!ꢈ%ꢋꢉ ꢌꢈꢇꢍꢈꢎꢍꢇ#ꢍ$ ꢃꢇꢆ ꢈ ꢌꢉꢋꢋꢈꢆꢇ#ꢈꢅ&ꢊꢅꢅ!ꢈꢁꢐꢐ(@ꢈꢎꢅꢍꢈ ꢃ!ꢅꢁ
ꢑꢁ ꢂꢃꢄꢅꢆ ꢃꢇꢆꢃꢆꢓꢈꢉꢆ!ꢈ#ꢇꢋꢅꢍꢉꢆꢊꢃꢆꢓꢈꢎꢅꢍꢈꢔꢕꢏ"ꢈ'ꢀꢖꢁ(ꢏꢁ
)ꢕ*+ )ꢉ ꢃꢊꢈꢂꢃꢄꢅꢆ ꢃꢇꢆꢁꢈꢗꢌꢅꢇꢍꢅ#ꢃꢊꢉꢋꢋꢘꢈꢅ&ꢉꢊ#ꢈ,ꢉꢋ$ꢅꢈ ꢌꢇ-ꢆꢈ-ꢃ#ꢌꢇ$#ꢈ#ꢇꢋꢅꢍꢉꢆꢊꢅ ꢁ
ꢏꢃꢊꢍꢇꢊꢌꢃꢎ ꢗꢅꢊꢌꢆꢇꢋꢇꢓꢘ ꢂꢍꢉ-ꢃꢆꢓ *ꢐꢖꢞꢀꢐꢀ)
DS22008E-page 22
2010 Microchip Technology Inc.
MCP1702
APPENDIX A: REVISION HISTORY
Revision E (November 2010)
The following is the list of modifications:
1. Updated the Thermal Resistance Typical value
for the SOT-89 package in the Junction
Temperature Estimate section.
Revision D (June 2009)
The following is the list of modifications:
1. DC Characteristics table: Updated the VOUT
Temperature Coefficient’s maximum value.
2. Section 7.0
“Packaging
Information”:
Updated package outline drawings.
Revision C (November 2008)
The following is the list of modifications:
1. DC Characteristics table: Added row to Output
Voltage Regulation for 1% custom part.
2. Temperature Specifications table: Numerous
changes to table.
3. Added Note 2 to Temperature Specifications
table.
4. Section 5.0
Section 5.2
paragraph.
“Functional
“Output”:
Description”,
Added second
5. Section 7.0 “Packaging Information”: Added
1% custom part information to this section. Also,
updated package outline drawings.
6. Product Identification System: Added 1%
custom part information to this page.
Revision B (May 2007)
The following is the list of modifications:
1. All Pages: Corrected minor errors in document.
2. Page 4: Added junction-to-case information to
Temperature Specifications table.
3. Page 16: Updated Package Outline Drawings in
Section 7.0 “Packaging Information”.
4. Page 21: Updated Revision History.
5. Page 23: Corrected examples in Product
Identification System.
Revision A (September 2006)
• Original Release of this Document.
2010 Microchip Technology Inc.
DS22008E-page 23
MCP1702
PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
Examples:
PART NO.
Device
X-
XX
X
X
X/
XX
a)
b)
c)
d)
e)
f)
MCP1702T-1202E/CB: 1.2V LDO Positive
Tape
and Reel Voltage
Output Feature Tolerance Temp. Package
Voltage Regulator,
SOT-23A-3 pkg.
Code
MCP1702T-1802E/MB: 1.8V LDO Positive
Voltage Regulator,
Device:
MCP1702: 2 µA Low Dropout Positive Voltage Regulator
SOT-89-3 pkg.
MCP1702T-2502E/CB: 2.5V LDO Positive
Voltage Regulator,
Tape and Reel:
Output Voltage *:
T
=
Tape and Reel
SOT-23A-3 pkg.
MCP1702T-3002E/CB: 3.0V LDO Positive
Voltage Regulator,
12
15
18
25
28
30
33
40
50
=
=
=
=
=
=
=
=
=
1.2V “Standard”
1.5V “Standard”
1.8V “Standard”
2.5V “Standard”
2.8V “Standard”
3.0V “Standard”
3.3V “Standard”
4.0V “Standard”
5.0V “Standard”
SOT-23A-3 pkg.
MCP1702T-3002E/MB: 3.0V LDO Positive
Voltage Regulator,
SOT-89-3 pkg.
MCP1702T-3302E/CB: 3.3V LDO Positive
Voltage Regulator,
*Contact factory for other output voltage options.
SOT-23A-3 pkg.
g)
h)
i)
MCP1702T-3302E/MB: 3.3V LDO Positive
Voltage Regulator,
Extra Feature Code:
Tolerance:
0
=
Fixed
SOT-89-3 pkg.
2
1
=
=
2.0% (Standard)
1.0% (Custom)
MCP1702T-4002E/CB: 4.0V LDO Positive
Voltage Regulator,
SOT-23A-3 pkg.
MCP1702-5002E/TO: 5.0V LDO Positive
Voltage Regulator,
Temperature:
Package Type:
E
=
-40C to +125C
TO-92 pkg.
CB
MB
TO
=
=
=
Plastic Small Outline Transistor (SOT-23A)
(equivalent to EIAJ SC-59), 3-lead,
Plastic Small Outline Transistor Header, (SOT-89),
3-lead
j)
MCP1702T-5002E/CB: 5.0V LDO Positive
Voltage Regulator,
SOT-23A-3 pkg.
Plastic Transistor Outline (TO-92), 3-lead
k)
MCP1702T-5002E/MB: 5.0V LDO Positive
Voltage Regulator,
SOT-89-3 pkg.
DS22008E-page 24
2010 Microchip Technology Inc.
Note the following details of the code protection feature on Microchip devices:
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
•
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
•
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
•
•
Microchip is willing to work with the customer who is concerned about the integrity of their code.
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights.
Trademarks
The Microchip name and logo, the Microchip logo, dsPIC,
KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART,
32
PIC logo, rfPIC and UNI/O are registered trademarks of
Microchip Technology Incorporated in the U.S.A. and other
countries.
FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor,
MXDEV, MXLAB, SEEVAL and The Embedded Control
Solutions Company are registered trademarks of Microchip
Technology Incorporated in the U.S.A.
Analog-for-the-Digital Age, Application Maestro, CodeGuard,
dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN,
ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial
Programming, ICSP, Mindi, MiWi, MPASM, MPLAB Certified
logo, MPLIB, MPLINK, mTouch, Omniscient Code
Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit,
PICtail, REAL ICE, rfLAB, Select Mode, Total Endurance,
TSHARC, UniWinDriver, WiperLock and ZENA are
trademarks of Microchip Technology Incorporated in the
U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
© 2010, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.
ISBN: 978-1-60932-690-6
Microchip received ISO/TS-16949:2002 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
2010 Microchip Technology Inc.
DS22008E-page 25
Worldwide Sales and Service
AMERICAS
ASIA/PACIFIC
ASIA/PACIFIC
EUROPE
Corporate Office
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Harbour City, Kowloon
Hong Kong
Tel: 852-2401-1200
Fax: 852-2401-3431
India - Bangalore
Tel: 91-80-3090-4444
Fax: 91-80-3090-4123
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://support.microchip.com
Web Address:
www.microchip.com
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11-4160-8632
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
India - Pune
Tel: 91-20-2566-1512
Fax: 91-20-2566-1513
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Japan - Yokohama
Tel: 81-45-471- 6166
Fax: 81-45-471-6122
China - Beijing
Tel: 86-10-8528-2100
Fax: 86-10-8528-2104
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Korea - Daegu
Tel: 82-53-744-4301
Fax: 82-53-744-4302
Boston
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Korea - Seoul
China - Chongqing
Tel: 86-23-8980-9588
Fax: 86-23-8980-9500
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
China - Hong Kong SAR
Tel: 852-2401-1200
Fax: 852-2401-3431
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Fax: 60-3-6201-9859
Cleveland
UK - Wokingham
Tel: 44-118-921-5869
Fax: 44-118-921-5820
Independence, OH
Tel: 216-447-0464
Fax: 216-447-0643
China - Nanjing
Tel: 86-25-8473-2460
Fax: 86-25-8473-2470
Malaysia - Penang
Tel: 60-4-227-8870
Fax: 60-4-227-4068
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
Detroit
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
Farmington Hills, MI
Tel: 248-538-2250
Fax: 248-538-2260
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
Taiwan - Hsin Chu
Tel: 886-3-6578-300
Fax: 886-3-6578-370
Kokomo
Kokomo, IN
Tel: 765-864-8360
Fax: 765-864-8387
China - Shenzhen
Tel: 86-755-8203-2660
Fax: 86-755-8203-1760
Taiwan - Kaohsiung
Tel: 886-7-213-7830
Fax: 886-7-330-9305
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
Taiwan - Taipei
Tel: 886-2-2500-6610
Fax: 886-2-2508-0102
Santa Clara
China - Xian
Tel: 86-29-8833-7252
Fax: 86-29-8833-7256
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
Santa Clara, CA
Tel: 408-961-6444
Fax: 408-961-6445
China - Xiamen
Tel: 86-592-2388138
Fax: 86-592-2388130
Toronto
Mississauga, Ontario,
Canada
Tel: 905-673-0699
Fax: 905-673-6509
China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049
08/04/10
DS22008E-page 26
2010 Microchip Technology Inc.
相关型号:
MCP1702T2802EMB
2.8 V FIXED POSITIVE LDO REGULATOR, 0.975 V DROPOUT, PSSO3, LEAD FREE, PLASTIC, TO-243, SOT-89, 3-PIN
MICROCHIP
MCP1702T2802ETO
2.8 V FIXED POSITIVE LDO REGULATOR, 0.975 V DROPOUT, PBCY3, LEAD FREE, PLASTIC, TO-93, TO-92, 3-PIN
MICROCHIP
MCP1702T3002ECB
3 V FIXED POSITIVE LDO REGULATOR, 0.975 V DROPOUT, PDSO3, LEAD FREE, PLASTIC, SOT-23A, 3-PIN
MICROCHIP
MCP1702T3002EMB
3 V FIXED POSITIVE LDO REGULATOR, 0.975 V DROPOUT, PSSO3, LEAD FREE, PLASTIC, TO-243, SOT-89, 3-PIN
MICROCHIP
MCP1702T3002ETO
3 V FIXED POSITIVE LDO REGULATOR, 0.975 V DROPOUT, PBCY3, LEAD FREE, PLASTIC, TO-93, TO-92, 3-PIN
MICROCHIP
MCP1702T3302ECB
3.3 V FIXED POSITIVE LDO REGULATOR, 0.725 V DROPOUT, PDSO3, LEAD FREE, PLASTIC, SOT-23A, 3-PIN
MICROCHIP
MCP1702T3302EMB
3.3 V FIXED POSITIVE LDO REGULATOR, 0.725 V DROPOUT, PSSO3, LEAD FREE, PLASTIC, TO-243, SOT-89, 3-PIN
MICROCHIP
MCP1702T3302ETO
3.3 V FIXED POSITIVE LDO REGULATOR, 0.725 V DROPOUT, PBCY3, LEAD FREE, PLASTIC, TO-93, TO-92, 3-PIN
MICROCHIP
MCP1702T4002ECB
4 V FIXED POSITIVE LDO REGULATOR, 0.725 V DROPOUT, PDSO3, LEAD FREE, PLASTIC, SOT-23A, 3-PIN
MICROCHIP
MCP1702T4002EMB
4 V FIXED POSITIVE LDO REGULATOR, 0.725 V DROPOUT, PSSO3, LEAD FREE, PLASTIC, TO-243, SOT-89, 3-PIN
MICROCHIP
MCP1702T4002ETO
4 V FIXED POSITIVE LDO REGULATOR, 0.725 V DROPOUT, PBCY3, LEAD FREE, PLASTIC, TO-93, TO-92, 3-PIN
MICROCHIP
MCP1702T5002EMB
5 V FIXED POSITIVE LDO REGULATOR, 0.65 V DROPOUT, PSSO3, LEAD FREE, PLASTIC, TO-243, SOT-89, 3-PIN
MICROCHIP
©2020 ICPDF网 联系我们和版权申明