MCP87050TUMF [MICROCHIP]
High-Speed N-Channel Power MOSFET;型号: | MCP87050TUMF |
厂家: | MICROCHIP |
描述: | High-Speed N-Channel Power MOSFET |
文件: | 总16页 (文件大小:758K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MCP87050
High-Speed N-Channel Power MOSFET
Features:
Description
• Low Drain-to-Source On Resistance (RDS(ON)
)
The MCP87050 is an N-Channel power MOSFET in a
popular PDFN 5 mm x 6 mm package. Advanced
packaging and silicon processing technologies allow
the MCP87050 to achieve a low QG for a given RDS(ON)
value, resulting in a low Figure of Merit (FOM).
Combined with low RG, the low Figure of Merit of the
MCP87050 allows high efficiency power conversion
with reduced switching and conduction losses.
• Low Total Gate Charge (QG) and Gate-to-Drain
Charge (QGD
)
• Low Series Gate Resistance (RG)
• Fast Switching
• Capable of Short Dead-Time Operation
• RoHS Compliant
Applications
• Point-of-Load DC-DC Converters
• High Efficiency Power Management in Servers,
Networking, and Automotive Applications
Package Type
PDFN 5 x 6
8
7
6
5
S 1
D
D
D
D
2
3
4
S
S
G
Product Summary Table: Unless otherwise indicated, TA = +25˚C
Parameters
Sym
Min Typ Max Units
Conditions
Operating Characteristics
Drain-to-Source Breakdown Voltage
BVDSS
VGS(TH)
RDS(ON)
25
1
—
—
V
V
VGS = 0V, ID = 250 µA
VDS = VGS, ID = 250 µA
Gate-to-Source Threshold Voltage
Drain-to-Source On Resistance
1.3
1.6
—
—
—
5.0
4.2
6.0
5.0
mΩ VGS = 4.5V, ID = 20A
mΩ GS = 10V, ID = 20A
V
Total Gate Charge
QG
QGD
RG
12.5 15
nC VDS = 12.5V, ID = 20A, VGS = 4.5V
Gate-to-Drain Charge
Series Gate Resistance
—
—
4.7
1.1
—
—
nC VDS = 12.5V, ID = 20A
Ω
Thermal Characteristics
Thermal Resistance Junction-to-X
RθJX
RθJC
—
—
—
—
56
˚C/W Note 1
Thermal Resistance Junction-to-Case
1.9 ˚C/W Note 2
Note 1:
R
θJX is determined with the device surface mounted on a 4-Layer FR4 PCB, with a 1” x 1” mounting pad of
2 oz. copper. This characteristic is dependent on user’s board design.
2: RθJC is determined using JEDEC 51-14 Method. This characteristic is determined by design.
2012 Microchip Technology Inc.
DS22308B-page 1
MCP87050
†
Notice:
Stresses above those listed under
1.0
ELECTRICAL
CHARACTERISTICS
“Maximum Ratings” may cause permanent damage to
the device. This is a stress rating only and functional
operation of the device at those or any other conditions
above those indicated in the operational sections of this
specification is not intended. Exposure to maximum
rating conditions for extended periods may affect
device reliability.
Absolute Maximum Ratings †
VDS.......................................................................+25V
VGS........................................................... +10.0V / -8V
ID, Continuous ................................. 100A, TC = +25˚C
PD.....................................................2.2W, TA = +25˚C
TJ, TSTG.............................................. -55˚C to +150˚C
EAS Avalanche Energy..................................... 162 mJ
ID = 18A, L = 1 mH, RG = 25Ω
DC ELECTRICAL CHARACTERISTICS
Electrical Characteristics: Unless otherwise indicated, TA = +25°C
Parameters
Sym
Min
Typ
Max
Units
Conditions
Static Characteristics
Drain-to-Source
BVDSS
25
—
—
V
VGS = 0V, ID = 250 µA
Breakdown Voltage
Drain-to-Source Leakage Current
Gate-to-Source Leakage Current
IDSS
IGSS
—
—
1
—
—
1
100
1.6
6.0
5
µA
nA
V
VGS = 0V, VDS = 20V
VDS = 0V, VGS = 10V/-8V
VDS = VGS, ID = 250 µA
Gate-to-Source Threshold Voltage VGS(TH)
1.3
5
Drain-to-Source On Resistance
RDS(ON)
gfs
—
—
—
m VGS = 4.5V, ID = 20A
m VGS = 10V, ID = 20A
4.2
101
Transconductance
—
S
VDS = 12.5V, ID = 20A
Dynamic Characteristics
Input Capacitance
CISS
COSS
CRSS
QG
—
—
—
—
—
—
—
—
—
1040
490
140
12.5
4.7
1.9
1.4
9.5
5
—
—
—
15
—
—
—
—
—
pF
pF
pF
nC
nC
nC
nC
nC
ns
VGS = 0V, VDS = 12.5V, f = 1 MHz
VGS = 0V, VDS = 12.5V, f = 1 MHz
VGS = 0V, VDS = 12.5V, f = 1 MHz
VDS = 12.5V, ID = 20A, VGS = 4.5V
VDS = 12.5V, ID = 20A
Output Capacitance
Reverse Transfer Capacitance
Total Gate Charge
Gate-to-Drain Charge
Gate-to-Source Charge
Gate Charge at VGS(TH)
Output Charge
QGD
QGS
VDS = 12.5V, ID = 20A
QG(TH)
QOSS
td(on)
VDS = 12.5V, ID = 20A
VDS = 12.5V, VGS = 0
Turn-On Delay Time
VDS = 12.5V, VGS = 4.5V,
ID = 20A, RG = 2
Rise Time
tr
td(off)
tf
—
—
—
—
18
11
5
—
—
—
—
ns
ns
ns
VDS = 12.5V, VGS = 4.5V,
ID = 20A, RG = 2
Turn-Off Delay Time
Fall Time
VDS = 12.5V, VGS = 4.5V,
ID = 20A, RG = 2
VDS = 12.5V, VGS = 4.5V,
ID = 20A, RG = 2
Series Gate Resistance
RG
1.1
DS22308B-page 2
2012 Microchip Technology Inc.
MCP87050
DC ELECTRICAL CHARACTERISTICS (CONTINUED)
Electrical Characteristics: Unless otherwise indicated, TA = +25°C
Parameters
Sym
Min
Typ
Max
Units
Conditions
Diode Characteristics
Diode Forward Voltage
Reverse Recovery Charge
Reverse Recovery Time
Avalanche Characteristics
Avalanche Energy
VFD
QRR
trr
—
—
—
0.8
20
16
1
V
IS = 20A, VGS = 0V
—
—
nC
ns
IS = 20A, di/dt = 300 A/µs
IS = 20A, di/dt = 300 A/µs
EAS
50
—
—
mJ
ID = 10A, L = 1 mH,
RG = 25
TEMPERATURE CHARACTERISTICS
Electrical Characteristics: Unless otherwise indicated, TA = +25°C
Parameters
Temperature Ranges
Sym
Min
Typ
Max
Units
Conditions
Operating Junction Temperature Range
Storage Temperature Range
TJ
TA
-55
-55
—
—
150
150
°C
°C
Package Thermal Resistances
Thermal Resistance Junction-to-X, 8L 5x6-PDFN
RθJX
—
—
—
—
56
°C/W Note 1
°C/W Note 2
Thermal Resistance Junction-to-Case, 8L 5x6-PDFN RθJC
1.9
Note 1: RθJX is determined with the device surface mounted on a 4-Layer FR4 PCB, with a 1” x 1” mounting pad of
2 oz. copper. This characteristic is dependent on user’s board design.
2: RθJC is determined using JEDEC 51-14 Method. This characteristic is determined by design.
2012 Microchip Technology Inc.
DS22308B-page 3
MCP87050
2.0
TYPICAL PERFORMANCE CURVES
Note:
The graphs and tables provided following this note are a statistical summary based on a limited number of
samples and are provided for informational purposes only. The performance characteristics listed herein
are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified
operating range (e.g., outside specified power supply range) and therefore outside the warranted range.
Note: Unless otherwise indicated, TA = +25°C.
80
1.8
1.6
1.4
1.2
1
ID = 20A
VGS = 10V
VGS = 4.5V
70
60
VGS = 4.5V
50
40
30
20
10
0
VGS = 3V
0.8
0.6
0.4
VGS = 2.5V
-60 -40 -20
0
20 40 60 80 100 120 140 160
0.0
0.5
1.0
1.5
2.0
VDS - Drain-to-Source Voltage (V)
TC- Case Temperature (°C)
FIGURE 2-1:
Typical Output
FIGURE 2-4:
Normalized On Resistance
Characteristics.
vs. Temperature.
80
10
VDS = 5V
ID = 20A
9
8
7
6
5
4
3
2
1
0
70
60
50
40
30
20
10
0
VDS = 5V
VDS = 12.5V
TC = 125°C
TC = -55°C
TC = 25°C
0
5
Q
10
15
20
25
1.25
1.5
1.75
2
2.25
2.5
2.75
3
VGS - Gate-to-Source Voltage (V)
G - Gate Charge (nC)
FIGURE 2-2:
Typical Transfer
FIGURE 2-5:
Gate-to-Source Voltage vs.
Characteristics.
Gate Charge.
12
2
ID = 20A
f = 1Mhz
VGS = 0V
11
10
9
1.8
1.6
1.4
1.2
1
8
CISS
TC = +125°C
7
6
0.8
0.6
0.4
0.2
0
5
COSS
CRSS
4
TC = +25°C
3
2
0
2
4
6
8
10
0
5
10
15
20
VGS - Gate-to-Source Voltage (V)
FIGURE 2-3:
Source Voltage.
On Resistance vs. Gate-to-
VDS- Drain-to-Source Voltage (V)
FIGURE 2-6:
Source Voltage.
Capacitance vs. Drain-to-
DS22308B-page 4
2012 Microchip Technology Inc.
MCP87050
Note: Unless otherwise indicated, TA = +25°C.
1.7
120
100
80
60
40
20
0
ID = 250uA
1.5
1.3
1.1
0.9
0.7
VGS = 10V
VGS = 4.5V
-75 -50 -25
0
25 50 75 100 125 150 175
0
25
50
75
100
125
150
TC - Case Temperature (˚C)
TC - Case Temperature (°C)
FIGURE 2-7:
Gate-to-Source Threshold
FIGURE 2-10:
Maximum Drain Current vs.
Voltage vs. Temperature.
Temperature.
100
10
1
0.1
DC = 0.5
DC = 0.3
1
TC = 125°C
DC = 0.1
TC = 25°C
DC = 0.05
DC = 0.02
DC = 0.01
Single Pulse
0.1
0.01
0.01
0.001
0.001
0.001
0.0
0.2
0.4
0.6
0.8
1.0
0.1
10
1000
VSD - Source-to-Drain Voltage (V)
t1 - Pulse Duration (s)
FIGURE 2-8:
Source-to-Drain Current vs.
FIGURE 2-11:
Transient Thermal
Source-to-Drain Voltage.
Impedance.
1000
100
Operation in this range is
limited by RDS(on)
100
1ms
10
1
TC = 25°C
10ms
10
TC = 150°C
100ms
1s
0.1
DC
RθJA = 56 °C/W
Single Pulse
1
0.01
0.01
0.1
1
10
100
0.01
0.1
1
10
100
VDS - Drain to Source Voltage (V)
tAv - Avalanche Time (ms)
FIGURE 2-9:
Maximum Safe Operating
FIGURE 2-12:
Single-Pulse Unclamped
Area.
Inductive Switching.
2012 Microchip Technology Inc.
DS22308B-page 5
MCP87050
Note: Unless otherwise indicated, TA = +25°C.
31
ID = 250 µA
30
29
28
27
26
-60 -40 -20
0
20 40 60 80 100 120 140 160
TC - Case Temperature (°C)
FIGURE 2-13:
Drain-to-Source Breakdown
Voltage vs. Temperature.
DS22308B-page 6
2012 Microchip Technology Inc.
MCP87050
3.0
PIN DESCRIPTIONS
The descriptions of the pins are listed in Table 3-1.
TABLE 3-1:
MCP87050
PINOUT DESCRIPTION FOR THE MCP87050
Pin Type
Function
5x6 PDFN
1, 2, 3
4
S
G
D
Source pin
Gate pin
5, 6, 7, 8
Drain pin, including exposed thermal pad
2012 Microchip Technology Inc.
DS22308B-page 7
MCP87050
4.0
4.1
PACKAGING INFORMATION
Package Marking Information*
8-Lead PDFN (5x6x1.0 mm)
Example
87050
U/MF
e
3
1219
256
NNN
PIN 1
PIN 1
*RoHS compliant using EU-RoHS exemption: 7(a) - Lead in high-melting-temperature-type solders
(i.e. lead-based alloys containing 85% by weight or more lead) can be found on the outer
packaging for this package.
Legend: XX...X Customer-specific information
Y
Year code (last digit of calendar year)
YY
WW
NNN
Year code (last 2 digits of calendar year)
Week code (week of January 1 is week ‘01’)
Alphanumeric traceability code
e
3
Pb-free JEDEC designator for Matte Tin (Sn)
This package is Pb-free. The Pb-free JEDEC designator (
can be found on the outer packaging for this package.
*
)
e
3
Note: In the event the full Microchip part number cannot be marked on one line, it will
be carried over to the next line, thus limiting the number of available
characters for customer-specific information.
DS22308B-page 8
2012 Microchip Technology Inc.
MCP87050
2012 Microchip Technology Inc.
DS22308B-page 9
MCP87050
DS22308B-page 10
2012 Microchip Technology Inc.
MCP87050
2012 Microchip Technology Inc.
DS22308B-page 11
MCP87050
NOTES:
DS22308B-page 12
2012 Microchip Technology Inc.
MCP87050
APPENDIX A: REVISION HISTORY
Revision B (November 2012)
• Updated the QGD value in the Product Summary
table and the DC Electrical Characteristics table.
• Updated the Thermal Resistance Junction-to-
Case value in theTemperature Characteristics
table.
• Replaced Figure 2-10 and Figure 2-13.
Revision A (September 2012)
• Original Release of this Document.
2012 Microchip Technology Inc.
DS22308B-page 13
MCP87050
PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
PART NO.
Device
X
/XX
Example:
a) MCP87050T-U/MF: Tape and Reel,
Temperature
Range
Package
Extended Temperature,
8LD PDFN package
Device:
MCP87050T:
N-Channel power MOSFET (Tape and Reel)
(PDFN)
Temperature Range:
Package:
U
= -55°C to +150°C (Ultra High)
MF = Plastic Dual Flat, No Lead Package
(5x6x1.0 mm Body) (PDFN), 8-lead
2012 Microchip Technology Inc.
DS22308B-page 14
Note the following details of the code protection feature on Microchip devices:
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
•
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
•
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
•
•
Microchip is willing to work with the customer who is concerned about the integrity of their code.
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights.
Trademarks
The Microchip name and logo, the Microchip logo, dsPIC,
FlashFlex, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro,
PICSTART, PIC logo, rfPIC, SST, SST Logo, SuperFlash
and UNI/O are registered trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries.
32
FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor,
MTP, SEEVAL and The Embedded Control Solutions
Company are registered trademarks of Microchip Technology
Incorporated in the U.S.A.
Silicon Storage Technology is a registered trademark of
Microchip Technology Inc. in other countries.
Analog-for-the-Digital Age, Application Maestro, BodyCom,
chipKIT, chipKIT logo, CodeGuard, dsPICDEM,
dsPICDEM.net, dsPICworks, dsSPEAK, ECAN,
ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial
Programming, ICSP, Mindi, MiWi, MPASM, MPF, MPLAB
Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code
Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit,
PICtail, REAL ICE, rfLAB, Select Mode, SQI, Serial Quad I/O,
Total Endurance, TSHARC, UniWinDriver, WiperLock, ZENA
and Z-Scale are trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
GestIC and ULPP are registered trademarks of Microchip
Technology Germany II GmbH & Co. & KG, a subsidiary of
Microchip Technology Inc., in other countries.
All other trademarks mentioned herein are property of their
respective companies.
© 2012, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.
ISBN: 978-1-62076-665-1
QUALITY MANAGEMENT SYSTEM
CERTIFIED BY DNV
Microchip received ISO/TS-16949:2009 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
== ISO/TS 16949 ==
2012 Microchip Technology Inc.
DS22308B-page 15
Worldwide Sales and Service
AMERICAS
ASIA/PACIFIC
ASIA/PACIFIC
EUROPE
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://www.microchip.com/
support
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Harbour City, Kowloon
Hong Kong
Tel: 852-2401-1200
Fax: 852-2401-3431
India - Bangalore
Tel: 91-80-3090-4444
Fax: 91-80-3090-4123
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11-4160-8632
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
India - Pune
Tel: 91-20-2566-1512
Fax: 91-20-2566-1513
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
Web Address:
www.microchip.com
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Japan - Osaka
Tel: 81-66-152-7160
Fax: 81-66-152-9310
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
China - Beijing
Tel: 86-10-8569-7000
Fax: 86-10-8528-2104
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Japan - Yokohama
Tel: 81-45-471- 6166
Fax: 81-45-471-6122
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Korea - Daegu
Tel: 82-53-744-4301
Fax: 82-53-744-4302
China - Chongqing
Tel: 86-23-8980-9588
Fax: 86-23-8980-9500
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
Korea - Seoul
China - Hangzhou
Tel: 86-571-2819-3187
Fax: 86-571-2819-3189
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
UK - Wokingham
Tel: 44-118-921-5869
Fax: 44-118-921-5820
Cleveland
Independence, OH
Tel: 216-447-0464
Fax: 216-447-0643
China - Hong Kong SAR
Tel: 852-2401-1200
Fax: 852-2401-3431
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Fax: 60-3-6201-9859
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
China - Nanjing
Tel: 86-25-8473-2460
Fax: 86-25-8473-2470
Malaysia - Penang
Tel: 60-4-227-8870
Fax: 60-4-227-4068
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
Detroit
Farmington Hills, MI
Tel: 248-538-2250
Fax: 248-538-2260
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
Indianapolis
Noblesville, IN
Tel: 317-773-8323
Fax: 317-773-5453
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
Taiwan - Hsin Chu
Tel: 886-3-5778-366
Fax: 886-3-5770-955
Los Angeles
China - Shenzhen
Tel: 86-755-8203-2660
Fax: 86-755-8203-1760
Taiwan - Kaohsiung
Tel: 886-7-213-7828
Fax: 886-7-330-9305
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
Taiwan - Taipei
Tel: 886-2-2508-8600
Fax: 886-2-2508-0102
Santa Clara
Santa Clara, CA
Tel: 408-961-6444
Fax: 408-961-6445
China - Xian
Tel: 86-29-8833-7252
Fax: 86-29-8833-7256
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
Toronto
Mississauga, Ontario,
Canada
China - Xiamen
Tel: 905-673-0699
Fax: 905-673-6509
Tel: 86-592-2388138
Fax: 86-592-2388130
China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049
10/26/12
DS22308B-page 16
2012 Microchip Technology Inc.
相关型号:
MCP9501PT-015E/OT
DIGITAL TEMP SENSOR-SINGLE TRIP POINT, 6Cel, RECTANGULAR, SURFACE MOUNT, LEAD FREE, PLASTIC, SOT-23, 5 PIN
MICROCHIP
MCP9501PT-045E/OT
DIGITAL TEMP SENSOR-SINGLE TRIP POINT, 6Cel, RECTANGULAR, SURFACE MOUNT, LEAD FREE, PLASTIC, SOT-23, 5 PIN
MICROCHIP
MCP9501PT-075E/OT
DIGITAL TEMP SENSOR-SINGLE TRIP POINT, 6Cel, RECTANGULAR, SURFACE MOUNT, LEAD FREE, PLASTIC, SOT-23, 5 PIN
MICROCHIP
MCP9501PT-085E/OT
DIGITAL TEMP SENSOR-SINGLE TRIP POINT, 6Cel, RECTANGULAR, SURFACE MOUNT, LEAD FREE, PLASTIC, SOT-23, 5 PIN
MICROCHIP
©2020 ICPDF网 联系我们和版权申明