SY100EL57ZCTR [MICROCHIP]
Multiplexer, 100EL Series, 1-Func, 4 Line Input, 1 Line Output, Complementary Output, ECL, PDSO16;型号: | SY100EL57ZCTR |
厂家: | MICROCHIP |
描述: | Multiplexer, 100EL Series, 1-Func, 4 Line Input, 1 Line Output, Complementary Output, ECL, PDSO16 光电二极管 逻辑集成电路 |
文件: | 总5页 (文件大小:52K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
7
SY10EL577
SY100EL57
4:1 DIFFERENTIAL
MULTIPLEXER
FEATURES
DESCRIPTION
■ 5V power supply
The SY10/100EL57 are fully differential 4:1 multiplexers.
By leaving the SEL1 line open (pulled LOW via the input
pulldown resistors) the device can also be used as a
differential 2:1 multiplexer with SEL0 input selecting between
D0 and D1. The fully differential architecture of the EL57
makes it ideal for use in low skew applications such as
clock distribution.
■ Useful as either 4:1 or 2:1 multiplexer
■ VBB output for single-ended operation
■ 75KΩ internal input pulldown resistors
■ Available in 150 mil 16-pin SOIC package
The SEL1 is the most significant select line. The binary
number applied to the select inputs will select the same
numbered data input (i.e., 00 selects D0).
Multiple VBB outputs are provided for single-ended or
AC coupled interfaces. In these scenarios, the VBB output
should be connected to the data bar inputs and bypassed
via a 0.01µF capacitor to ground. Note that the VBB output
can source/sink up to 0.5mA of current without upsetting
the voltage level.
PIN NAMES
TRUTH TABLE
Pin
Function
Differential Data Inputs
Mux Select Inputs
Reference Outputs
Data Outputs
SEL1
SEL0
DATA OUT
D0-3
SEL0, 1
VBB1, 2
Q
L
L
L
H
L
D0
D1
D2
D3
H
H
H
Rev.: H
Amendment: /0
M9999-021910
hbwhelp@micrel.com or (408) 955-1690
1
Issue Date: February 2010
SY10EL57
Micrel, Inc.
SY100EL57
PACKAGE/ORDERING INFORMATION
Ordering Information(1)
Package
Type
Operating
Range
Package
Marking
Lead
Finish
Part Number
SY10EL57ZC
Z16-2
Z16-2
Z16-2
Z16-2
Z16-2
Z16-2
Z16-2
Z16-2
Z16-2
Commercial
Commercial
Commercial
Commercial
Industrial
SY10EL57ZC
SY10EL57ZC
SY100EL57ZC
SY100EL57ZC
SY10EL57ZI
SY10EL57ZI
SY100EL57ZI
SY100EL57ZI
Sn-Pb
Sn-Pb
Sn-Pb
Sn-Pb
Sn-Pb
Sn-Pb
Sn-Pb
Sn-Pb
SY10EL57ZCTR(2)
SY100EL57ZC
SY100EL57ZCTR(2)
SY10EL57ZI
SY10EL57ZITR(2)
Industrial
SY100EL57ZI
Industrial
SY100EL57ZITR(2)
SY10EL57ZG(3)
Industrial
Industrial
SY10EL57ZG with
Pb-Free bar-line indicator
Pb-Free
NiPdAu
SY10EL57ZGTR(2, 3)
SY100EL57ZG(3)
SY100EL57ZGTR(2, 3)
Notes:
Z16-2
Z16-2
Z16-2
Industrial
Industrial
Industrial
SY10EL57ZG with
Pb-Free bar-line indicator
Pb-Free
NiPdAu
SY100EL57ZG with
Pb-Free bar-line indicator
Pb-Free
NiPdAu
SY100EL57ZG with
Pb-Free bar-line indicator
Pb-Free
NiPdAu
16-Pin SOIC (Z16-1)
1. Contact factory for die availability. Dice are guaranteed at T = 25°C, DC Electricals only.
A
2. Tape and Reel.
3. Pb-Free package is recommended for new designs.
M9999-021910
hbwhelp@micrel.com or (408) 955-1690
2
SY10EL57
Micrel, Inc.
SY100EL57
ABSOLUTE MAXIMUM RATINGS(1)
Symbol
VEE
Rating
Value
Unit
V
Power Supply (VCC = 0V)
Input Voltage (VCC = 0V)
–8.0 to 0
0 to -6.0
VIN
V
IOUT
Output Current
- Continuous
- Surge
50
mA
100
TLEAD
TA
Lead Storage Temperature
+260
˚C
˚C
Operating Temperature Range
-40 to +85
VEE
Operating Range(1), (2)
-5.7 to -4.2
V
Notes:
1. Absolute maximum ratings, beyond which, device life may be impaired, unless otherwise specified on an individual data sheet.
2. Parametric values specified at:
5 volt Power Supply Range 100EL57 Series:
10EL57 Series
-4.2V to -5.5V.
-4.75V to -5.5V.
10EL DC CHARACTERISTICS
VEE = -5.5 to -4.75V; VCC = GND = 0V(1)
TA = -40˚C
TA = 0˚C
Min.
TA = +25˚C
TA = +85˚C
Min.
Symbol
VOH
VOL
VIH
Parameter
Output HIGH Voltage
Output LOW Voltage
Input HIGH Voltage
Input LOW Voltage
Input LOW Current
Min.
Max.
-890
-1650
-890
-1500
—
Max.
-840
-1630
-840
-1480
—
MIn.
-980
Max.
-810
-1630
-810
-1480
—
Max.
Unit
mV
mV
mV
mV
µA
-1080
-1950
-1230
-1950
0.5
-1020
-1950
-1170
-1950
0.5
-910
-1950
-1060
-1950
0.5
-720
-1950
-1130
-1950
0.5
-1595
-720
-1445
—
VIL
IIL
Note:
1. 10EL circuits are designed to meet the DC specifications shown in the table after thermal equilibrium has been established. The circuit is in a test
socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. Outputs are terminated through a 50Ω
resistor to -2.0V except where otherwise specified on the individual data sheets.
100EL DC CHARACTERISTICS
VEE = -5.5 to -4.75V; VCC = GND = 0V(1)
TA =-40˚C
TA =0˚C to 85C
Symbol
VOH
VOL
Parameter
Output HIGH Voltage
Output LOW Voltage
Output HIGH Voltage
Output LOW Voltage
Input HIGH Voltage
Input LOW Voltage
Input LOW Current
Min.
-1085
-1830
-1095
—
Typ.
-1005
-1695
—
Max.
Min.
-1025
Typ.
Max.
-880
Unit
mV
mV
mV
mV
mV
mV
µA
Condition
-880
-955
VIN = VIH (Max) or VIL (Min)
VIN = VIH (Max) or VIL (Min)
VIN = VIH (Min)or VIL (Max)
VIN = VIH (Min)or VIL (Max)
-1555 -1810 -1705 -1620
VOHA
VOLA
VIH
—
-1035
—
—
—
—
—
—
—
—
-1555
-880
-1610
-880
-1475
—
-1165
-1810
0.5
—
-1165
VIL
—
-1475 -1810
0.5
IIL
—
—
VIN = VIL (Max)
Note:
1. The same DC parameter values at VEE = -4.5V now apply across the full VEE range of -4.2V to -5.5V. Outputs are terminated through a 50Ω resistor
to -2.0V except where otherwise specified on the individual data sheets.
M9999-021910
hbwhelp@micrel.com or (408) 955-1690
3
SY10EL57
Micrel, Inc.
SY100EL57
DC ELECTRICAL CHARACTERISTICS
VEE = -5.5 to -4.2V; VCC = GND = 0V
TA = -40°C
TA = 0°C
TA = +25°C
TA = +85˚C
Symbol
Parameter
Power Supply
Current
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit
IEE
10EL
100EL
—
—
15
15
24
24
—
—
15
15
24
24
—
—
15
15
24
24
—
—
15
15
24
27
mA
VBB
IIH
Output Reference 10EL -1.43
—
—
-1.30 -1.38
-1.26 -1.38
—
—
-1.27 -1.35
-1.26 -1.38
—
—
-1.25 -1.31
-1.26 -1.38
—
—
-1.19
-1.26
V
Voltage
100EL -1.38
Input HIGH Current
—
—
150
—
—
150
—
—
150
—
—
150
µA
AC ELECTRICAL CHARACTERISTICS
VEE = -5.5 to -4.2V; VCC = GND = 0V
TA = -40°C
TA = 0°C
TA = +25°C
TA = +85˚C
Symbol
Parameter
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit
tPD
Propagation Delay
DATA to Q/Q
SEL to Q/Q
ps
350
440
—
—
550
690
350
440
—
—
550
690
360
440
—
—
560
690
380
460
—
—
580
710
tskew
VPP
Input Skew DATA to Q
—
—
50
—
—
50
—
—
50
—
—
50
ps
Minmum Input Swing
DATA
mV
150
-2.0
—
—
150
—
—
150
—
—
150
—
—
VCMR
Common Mode Range
DATA
V
—
—
-0.4
375
-2.0
125
—
—
-0.4
375
-2.0
125
—
—
-0.4
375
-2.0
125
—
—
-0.4
375
tr
tf
Output Rise/Fall Times Q 125
(20% - 80%)
ps
M9999-021910
hbwhelp@micrel.com or (408) 955-1690
4
SY10EL57
Micrel, Inc.
SY100EL57
16-PIN SOIC .150" WIDE (Z16-2)
Rev. 02
MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA
TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com
The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use.
Micrel reserves the right to change circuitry and specifications at any time without notification to the customer.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can
reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into
the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s
use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify
Micrel for any damages resulting from such use or sale.
© 2006 Micrel, Incorporated.
M9999-021910
hbwhelp@micrel.com or (408) 955-1690
5
相关型号:
SY100EL57ZGTR
100EL SERIES, 4 LINE TO 1 LINE MULTIPLEXER, COMPLEMENTARY OUTPUT, PDSO16, 0.150 INCH, LEAD FREE, SOIC-16
MICROCHIP
SY100EL57ZI
Multiplexer, 100EL Series, 1-Func, 4 Line Input, 1 Line Output, Complementary Output, ECL, PDSO16, 0.150 INCH, SOIC-16
MICROCHIP
SY100EL58ZC
Multiplexer, 100EL Series, 1-Func, 2 Line Input, 1 Line Output, Complementary Output, ECL, PDSO8
MICROCHIP
©2020 ICPDF网 联系我们和版权申明