TC1014-2.7VCTRT [MICROCHIP]
2.7 V FIXED POSITIVE LDO REGULATOR, 0.25 V DROPOUT, PDSO5, SOT-23A, 5 PIN;型号: | TC1014-2.7VCTRT |
厂家: | MICROCHIP |
描述: | 2.7 V FIXED POSITIVE LDO REGULATOR, 0.25 V DROPOUT, PDSO5, SOT-23A, 5 PIN 光电二极管 |
文件: | 总14页 (文件大小:186K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TC1014
TC1015
TC1185
EVALUATION
KIT
AVAILABLE
50mA, 100mA, 150mA CMOS LDOs with Shutdown and
Reference Bypass
FEATURES
GENERAL DESCRIPTION
The TC1014, TC1015, and TC1185 are high accuracy
(typically ±0.5%) CMOS upgrades for older (bipolar) low drop-
out regulators such as the LP2980. Designed specifically for
battery-operated systems, the devices’ CMOS construction
eliminates wasted ground current, significantly extending bat-
tery life. Total supply current is typically 50µA at full load (20 to
60 times lower than in bipolar regulators!).
Keyfeaturesforthedevicesincludeultralow-noiseopera-
tion(plusoptionalBypassinput),fastresponsetostepchanges
inload,andverylowdropoutvoltage,typically85mV(TC1014),
180mV (TC1015), and 270mV (TC1185) at full load. Supply
current is reduced to 0.5µA (max) and VOUT falls to zero when
the shutdown input is low. The devices also incorporate both
over-temperature and over-current protection.
ꢀ Extremely Low Supply Current (50
ꢀ Very Low Dropout Voltage
ꢀ 50mA, 100mA, and 150mA Output
(TC1014, TC1015, and TC1185, Respectively)
ꢀ High Output Voltage Accuracy
ꢀ Standard or Custom Output Voltages
ꢀ Power-Saving Shutdown Mode
ꢀ Reference Bypass Input for Ultra Low-Noise
Operation
µA, Typ.)
ꢀ Over-Current and Over-Temperature Protection
ꢀ Space-Saving 5-Pin SOT-23A Package
ꢀ Pin Compatible Upgrades for Bipolar Regulators
The TC1014, TC1015, and TC1185 are stable with an
output capacitor of only 1µF and have a maximum output
current of 50mA, 100mA, and 150mA, respectively. For higher
output versions, see the TC1107, TC1108, and
TC1173 (IOUT = 300 mA) data sheets.
APPLICATIONS
ꢀ Battery Operated Systems
ꢀ Portable Computers
ꢀ Medical Instruments
ꢀ Instrumentation
ꢀ Cellular / GSM / PHS Phones
ꢀ Linear Post-Regulator for SMPS
ꢀ Pagers
ORDERING INFORMATION
Part
Junction
Number
Package
Temp. Range
TYPICAL APPLICATION
TC1014-xxVCT
TC1015-xxVCT
TC1185-xxVCT
5-Pin SOT-23A* – 40°C to +125°C
5-Pin SOT-23A* – 40°C to +125°C
5-Pin SOT-23A* – 40°C to +125°C
TC1015EV
Evaluation Kit for CMOS LDO Family
NOTE: *5-Pin SOT-23A is equivalent to EIAJ SC-74A.
1
5
V
V
V
V
OUT
IN
IN
OUT
Available Output Voltages:
1µF
1.8, 2.5, 2.7, 2.8, 2.85, 3.0, 3.3, 3.6, 4.0, 5.0
xx indicates ouput voltages
2
3
GND
TC1014
TC1015
TC1185
Other output voltages are available. Please contact Microchip
Technologies for details.
PIN CONFIGURATION
4
SHDN
Bypass
VOUT
Bypass
4
470pF
Reference
Bypass Cap
(Optional)
5
TC1014
TC1015
TC1185
(5-Pin SOT-23A*)
TOP VIEW
Shutdown Control
(from Power Control Logic)
2
1
3
VIN
GND
SHDN
NOTE: *5-Pin SOT-23A is equivalent to EIAJ SC-74A
2001 Microchip Technology Inc. DS21335A
TC1014/TC1015/TC1185-3 1/04/01
50mA, 100mA, 150mA CMOS LDOs
with Shutdown and Reference Bypass
TC1014
TC1015
TC1185
Maximum Voltage On Any Pin .......... VIN + 0.3V to – 0.3V
Lead Temperature (Soldering, 10 Sec.)................ +260°C
ABSOLUTE MAXIMUM RATINGS*
Input Voltage ..............................................................6.5V
Output Voltage .................................. (– 0.3) to (VIN + 0.3)
Power Dissipation ..................................Internally Limited
Operating Temperature.................... – 40°C < TJ < 125°C
Storage Temperature ............................– 65°C to +150°C
*Stresses beyond those listed under "Absolute Maximum Ratings" may
cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond
those indicated in the operational sections of the specifications is not
implied. Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
ELECTRICAL CHARACTERISTICS: VIN = VR + 1V, IL = 100µA, CL = 3.3µF, SHDN > VIH, TA = 25
°C, unless otherwise noted.
Boldface type specifications apply for junction temperatures of – 40°C to +125°C.
Symbol
Parameter
Test Conditions
Min
2.7
Typ
Max
6.0
Units
VIN
Input Operating Voltage
Maximum Output Current
Note 1
—
V
IOUT
TC1014
TC1015
TC1185
50
100
150
—
—
—
—
—
—
mA
MAX
VOUT
Output Voltage
Note 2
Note 3
VR – 2.5% VR ±0.5% VR + 2.5%
V
TCVOUT
VOUT Temperature Coefficient
—
20
—
ppm/°C
—
40
—
∆VOUT/∆VIN
∆VOUT/VOUT
Line Regulation
(VR + 1V) < VIN < 6V
—
0.05
0.35
%
%
Load Regulation
TC1014;TC1015 IL = 0.1mA to IOUT
—
—
0.5
0.5
2
3
MAX
MAX
TC1185
IL = 0.1mA to IOUT
Note 4
VIN – VOUT
Dropout Voltage
IL = 100µA
IL = 20mA
IL = 50mA
—
—
—
—
—
2
65
85
180
270
—
—
120
250
400
mV
TC1015; TC1185 IL = 100mA
TC1185
IL = 150mA
Note 5
IIN
Supply Current (Note 8)
Shutdown Supply Current
Power Supply Rejection Ratio
Output Short Circuit Current
Thermal Regulation
SHDN = VIH, IL = 0
SHDN = 0V
—
—
—
—
—
—
—
—
50
0.05
64
80
0.5
—
µA
µA
IINSD
PSRR
F
RE ≤ 1KHz
dB
IOUT
VOUT = 0V
Notes 6, 7
300
0.04
160
10
450
—
mA
SC
∆VOUT/∆PD
TSD
V/W
°C
Thermal Shutdown Die Temperature
Thermal Shutdown Hysteresis
Output Noise
—
∆TSD
—
°C
eN
IL = IOUT
,
F = 10kHz
600
—
nV/√Hz
MAX
470pF from Bypass to GND
SHDN Input
VIH
VIL
SHDN Input High Threshold
SHDN Input Low Threshold
VIN = 2.5V to 6.5V
VIN = 2.5V to 6.5V
45
—
—
—
—
%VIN
%VIN
15
NOTES: 1. The minimum VIN has to meet two conditions: VIN ≥ 2.7V and VIN ≥ VR + VDROPOUT
.
2. VR is the regulator output voltage setting. For example: VR = 1.8V, 2.5V, 2.7V, 2.8V, 2.85V, 3.0V, 3.3V, 3.6V, 4.0V, 5.0V.
MIN) x 10 6
3. TCVOUT = (VOUT
V
OUT
–
MAX
∆T
VOUT
x
4. Regulation is measured at a constant junction temperature using low duty cycle pulse testing. Load regulation is tested over a load range from 1.0mA
to the maximum specified output current. Changes in output voltage due to heating effects are covered by the thermal regulation specification.
5. Dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its nominal value at a 1V differential.
6. Thermal Regulation is defined as the change in output voltage at a time T after a change in power dissipation is applied, excluding load or
line regulation effects. Specifications are for a current pulse equal to ILMAX at VIN = 6V for T = 10msec.
7. Themaximumallowablepowerdissipationisafunctionofambienttemperature, themaximumallowablejunctiontemperatureandthethermal
resistance from junction-to-air (i.e. TA, TJ, θJA). Exceeding the maximum allowable power dissipation causes the device to initiate thermal
shutdown. Please see Thermal Considerations section of this data sheet for more details.
8. Apply for Junction Temperatures of –40°C to +85°C.
2001 Microchip Technology Inc. DS21335A
TC1014/TC1015/TC1185-3 01/04/01
2
50mA, 100mA, 150mA CMOS LDOs
with Shutdown and Reference Bypass
TC1014
TC1015
TC1185
PIN DESCRIPTION
Pin No.
(5-Pin SOT-23A)
Symbol
Description
1
2
3
VIN
Unregulated supply input.
Ground terminal.
GND
SHDN
Shutdown control input. The regulator is fully enabled when a logic high is applied to
this input. The regulator enters shutdown when a logic low is applied to this input.During
shutdown, output voltage falls to zero, and supply current is reduced to 0.5µA (max).
4
5
Bypass
VOUT
Reference bypass input. Connecting a 470pF to this input further reduces output noise.
Regulated voltage output.
Bypass Input
DETAILED DESCRIPTION
A 470pF capacitor connected from the Bypass input to
ground reduces noise present on the internal reference,
which in turn significantly reduces output noise. If output
noise is not a concern, this input may be left unconnected.
Larger capacitor values may be used, but results in a longer
time period to rated output voltage when power is initially
applied.
The TC1014, TC1015, and TC1185 are precision fixed
output voltage regulators. (If an adjustable version is de-
sired, please see the TC1070, TC1071, or TC1187 data
sheets.) Unlike bipolar regulators, the TC1014, TC1015,
and TC1185 supply current does not increase with load
current. In addition, VOUT remains stable and within regula-
tion at very low load currents (an important consideration in
RTC and CMOS RAM battery back-up applications).
Figure 1 shows a typical application circuit. The regula-
tor is enabled any time the shutdown input (SHDN) is at or
above VIH, and shutdown (disabled) when SHDN is at or
below VIL. SHDN may be controlled by a CMOS logic gate,
or I/O port of a microcontroller. If the SHDN input is not
required, it should be connected directly to the input supply.
While in shutdown, supply current decreases to 0.05µA
(typical) and VOUT falls to zero volts.
Output Capacitor
A 1µF (min) capacitor from VOUT to ground is required.
The output capacitor should have an effective series resis-
tance of 5Ω or less. A 1µF capacitor should be connected
from VIN to GND if there is more than 10 inches of wire
between the regulator and the AC filter capacitor, or if a
battery is used as the power source. Aluminum electrolytic
or tantalum capacitor types can be used. (Since many
aluminum electrolytic capacitors freeze at approximately –
30°C, solid tantalums are recommended for applications
operating below – 25°C.) When operating from sources
other than batteries, supply-noise rejection and transient
response can be improved by increasing the value of the
input and output capacitors and employing passive filtering
techniques.
V
V
V
OUT
OUT
IN
1µF
1µF
BATTERY
TC1014
TC1015
TC1185
GND
Thermal Considerations
Thermal Shutdown
Integrated thermal protection circuitry shuts the regula-
tor off when die temperature exceeds 160°C. The regulator
remains off until the die temperature drops to approximately
150°C.
SHDN
Bypass
470pF
Reference
Bypass Cap
(Optional)
Power Dissipation
Shutdown Control
(to CMOS Logic or Tie to V if Unused)
The amount of power the regulator dissipates is prima-
rilyafunctionofinputandoutputvoltage,andoutputcurrent.
Thefollowingequationisusedtocalculateworstcasepower
dissipation:
IN
Figure 1. Typical Application Circuit
2001 Microchip Technology Inc. DS21335A
TC1014/TC1015/TC1185-3 01/04/01
3
50mA, 100mA, 150mA CMOS LDOs
with Shutdown and Reference Bypass
TC1014
TC1015
TC1185
PD ≈ (VIN
VOUT
ILOAD
)
MIN MAX
Maximum allowable power dissipation:
–
MAX
Where:
PDMAX = (TJMAX – TAMAX
)
PD = Worst case actual power dissipation
= Maximum voltage on VIN
θJA
= (125 – 55)
220
VIN
VOUT
MAX
= Minimum regulator output voltage
MIN
ILOADMAX = Maximum output (load) current
= 318mW
Equation 1.
In this example, the TC1014 dissipates a maximum of
only 26.7 mW; far below the allowable limit of 318 mW. In a
similar manner, Equation 1 and Equation 2 can be used to
calculate maximum current and/or input voltage limits.
The maximum allowablepower dissipation (Equation 2)
is a function of the maximum ambient temperature (TAMAX),
the maximum allowable die temperature (125°C) and the
thermal resistance from junction-to-air (θJA). The
5-Pin SOT-23A package has a θJA of approximately 220°C/
Watt when mounted on a single layer FR4 dielectric copper
clad PC board.
Layout Considerations
The primary path of heat conduction out of the package
isviathepackageleads. Therefore, layoutshavingaground
plane, wide traces at the pads, and wide power supply bus
lines combine to lower θJA and, therefore, increase the
maximum allowable power dissipation limit.
PD MAX (TJMAX – TA
)
=
MAX
θJA
Where all terms are previously defined.
Equation 2.
Equation 1 can be used in conjunction with Equation 2
to ensure regulator thermal operation is within limits. For
example:
Given:
VIN
VOUT
ILOAD
= 3.0V +10%
= 2.7V – 2.5%
= 40mA
MAX
MIN
MAX
TJMAX = 125°C
TAMAX = 55°C
Find: 1. Actual power dissipation
2. Maximum allowable dissipation
Actual power dissipation:
PD ≈ (VIN
VOUT
ILOAD
)
MIN MAX
–
MAX
= [(3.0 x 1.1) – (2.7 x .975)]40 x 10–3
= 26.7mW
2001 Microchip Technology Inc. DS21335A
TC1014/TC1015/TC1185-3 01/04/01
4
50mA, 100mA, 150mA CMOS LDOs
with Shutdown and Reference Bypass
TC1014
TC1015
TC1185
TYPICAL CHARACTERISTICS: (Unless otherwise specified, all parts are measured at Temperature = 25°C)
Dropout Voltage vs. Temperature (VOUT = 3.3V)
ILOAD = 10mA
Dropout Voltage vs. Temperature (VOUT = 3.3V)
ILOAD = 50mA
0.020
0.018
0.016
0.014
0.012
0.010
0.008
0.006
0.004
0.002
0.000
0.100
0.090
0.080
0.070
0.060
0.050
0.040
0.030
0.020
0.010
0.000
CIN = 1µF
COUT = 1µF
CIN = 1µF
COUT = 1µF
-40
-20
0
20
50
70
125
-40
-20
0
20
50
70
125
TEMPERATURE °C
TEMPERATURE (°C)
Dropout Voltage vs. Temperature (VOUT = 3.3V)
ILOAD = 100mA
Dropout Voltage vs. Temperature (VOUT = 3.3V)
ILOAD = 150mA
0.300
0.250
0.200
0.150
0.100
0.050
0.000
0.200
0.180
0.160
0.140
0.120
0.100
0.080
0.060
0.040
0.020
0.000
CIN = 1µF
COUT = 1µF
CIN = 1µF
COUT = 1µF
-40
-20
0
20
50
TEMPERATURE °C
70
125
-40
-20
0
20
50
TEMPERATURE °C
70
125
Ground Current vs.VIN (VOUT = 3.3V)
Ground Current vs.VIN (VOUT = 3.3V)
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
ILOAD = 10mA
ILOAD = 100mA
CIN = 1µF
COUT = 1µF
CIN = 1µF
COUT = 1µF
0 0.5 1 1.5
2
2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5
0
2
2.5
3
VIN (V)
0.5 1 1.5
3.5 4 4.5
5 5.5 6 6.5 7 7.5
VIN (V)
2001 Microchip Technology Inc. DS21335A
TC1014/TC1015/TC1185-3 01/04/01
5
50mA, 100mA, 150mA CMOS LDOs
with Shutdown and Reference Bypass
TC1014
TC1015
TC1185
TYPICAL CHARACTERISTICS: (Unless otherwise specified, all parts are measured at Temperature = 25°C)
VOUT vs.VIN (VOUT = 3.3V)
Ground Current vs.VIN (VOUT = 3.3V)
ILOAD = 150mA
3.5
3
80
70
60
50
40
30
20
10
0
ILOAD = 0
2.5
2
1.5
1
CIN = 1µF
COUT = 1µF
0.5
0
CIN = 1µF
COUT = 1µF
2
0 0.5 1 1.5
2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5
VIN (V)
0
2
2.5
3
3.5
4
4.5
5
6
6.5 7
0.5 1 1.5
5.5
VIN(V)
Output Voltage vs. Temperature ( VOUT = 3.3V)
ILOAD = 10mA
VOUT vs. VIN ( VOUT = 3.3V)
3.320
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
ILOAD = 100mA
3.315
3.310
3.305
3.300
3.295
3.290
3.285
3.280
3.275
CIN = 1µF
COUT = 1µF
CIN = 1µF
VIN = 4.3V
COUT = 1µF
-40
-20
-10
0
20
40
85
125
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5 6.5
6
7
TEMPERATURE °C
VIN(V)
Output Voltage vs. Temperature (VOUT = 3.3V)
ILOAD = 150 mA
3.290
3.288
3.286
3.284
3.282
3.280
3.278
3.276
3.274
CIN = 1µF
COUT = 1µF
VIN = 4.3V
-40
-20
-10
0
20
40
85
125
TEMPERATURE °C
2001 Microchip Technology Inc. DS21335A
TC1014/TC1015/TC1185-3 01/04/01
6
50mA, 100mA, 150mA CMOS LDOs
with Shutdown and Reference Bypass
TC1014
TC1015
TC1185
TYPICAL CHARACTERISTICS
Ouput Voltage vs.Temperature (VOUT = 5V)
5.025
Output Voltage vs.Temperature (VOUT = 5V)
4.994
4.992
4.990
4.988
4.986
4.984
4.982
4.980
4.978
4.976
4.974
ILOAD = 150mA
ILOAD = 10mA
5.020
5.015
5.010
5.005
5.000
4.995
4.990
4.985
VIN = 6V, COUT = 1µF, CIN = 1µF
VIN = 6V, COUT = 1µF, CIN = 1µF
-40
-20
-10
0
20
TEMPERATURE °C
40
85
125
-40
-20
-10
0
20
40
85
125
TEMPERATURE °C
Temperature vs. Quiescent Current (VOUT = 5V)
ILOAD = 150mA
Temperature vs. Quiescent Current (VOUT = 5V)
80
70
60
50
40
30
20
70
60
50
40
30
20
10
0
ILOAD = 10mA
10 VIN = 6V, COUT = 1µF, CIN = 1µF
0
VIN = 6V, COUT = 1µF, CIN = 1µF
-40
-20
-10
0
20
40
85
125
-40
-20
-10
0
20
40
85
125
TEMPERATURE (°C)
TEMPERATURE °C
Output Noise vs. Frequency
Stability Region vs. Load Current
= 1µF
Power Supply Rejection Ratio
= 10mA
1000
–30
–35
10.0
1.0
C
I
OUT
to 10µF
OUT
R
C
C
C
= 50Ω
LOAD
= 1µF
V
V
V
C
C
= 4V
= 100mV
= 3V
= 0
= 1µF
IN
IN
OUT
IN
OUT
DC
AC
OUT
–40
–45
p-p
= 1µF
= 0
IN
BYP
100
10
1
–50
–55
Stable Region
–60
–65
–70
–75
–80
0.1
0.0
0.1
0.01
0.1K
1K
10K
1000K
100K
0.01K
0.01K
0.1K
10
50 60 70 80 90 100
40
1K
10K 100K
0
20
1000K
30
FREQUENCY (Hz)
FREQUENCY (Hz)
LOAD CURRENT (mA)
2001 Microchip Technology Inc. DS21335A
TC1014/TC1015/TC1185-3 01/04/01
7
50mA, 100mA, 150mA CMOS LDOs
with Shutdown and Reference Bypass
TC1014
TC1015
TC1185
TYPICAL CHARACTERISTICS
Measure Rise Time of 3.3V LDO without Bypass Capacitor
Measure Rise Time of 3.3V LDO with Bypass Capacitor
Conditions: CIN = 1µF, COUT = 1µF, CBYP = 0pF, ILOAD = 100mA
VIN = 4.3V, Temp = 25°C, Rise Time = 184µS
Conditions: CIN = 1µF, COUT = 1µF, CBYP = 470pF, ILOAD = 100mA
VIN = 4.3V, Temp = 25°C, Rise Time = 448µS
VSHDN
VSHDN
VOUT
VOUT
Measure Fall Time of 3.3V LDO without Bypass Capacitor
Measure Fall Time of 3.3V LDO with Bypass Capacitor
Conditions: CIN = 1µF, COUT = 1µF, CBYP = 0pF, ILOAD = 100mA
VIN = 4.3V, Temp = 25°C, Fall Time = 52µS
Conditions: CIN = 1µF, COUT = 1µF, CBYP = 470pF, ILOAD = 50mA
VIN = 4.3V, Temp = 25°C, Fall Time = 100µS
VSHDN
VSHDN
VOUT
VOUT
2001 Microchip Technology Inc. DS21335A
TC1014/TC1015/TC1185-3 01/04/01
8
50mA, 100mA, 150mA CMOS LDOs
with Shutdown and Reference Bypass
TC1014
TC1015
TC1185
TYPICAL CHARACTERISTICS
Measure Rise Time of 5.0V LDO without Bypass Capacitor
Measure Rise Time of 5.0V LDO with Bypass Capacitor
Conditions: CIN = 1µF, COUT = 1µF, CBYP = 0, ILOAD = 100mA
VIN = 6V, Temp = 25°C, Rise Time = 192µS
Conditions: CIN = 1µF, COUT = 1µF, CBYP = 470pF, ILOAD = 100mA
VIN = 6V, Temp = 25°C, Rise Time = 390µS
VSHDN
VSHDN
VOUT
VOUT
Measure Fall Time of 5.0V LDO with Bypass Capacitor
Measure Fall Time of 5.0V LDO without Bypass Capacitor
Conditions: CIN = 1µF, COUT = 1µF, CBYP = 470pF, ILOAD = 50mA
VIN = 6V, Temp = 25°C, Fall Time = 167µS
Conditions: CIN = 1µF, COUT = 1µF, CBYP = 0pF, ILOAD = 100mA
VIN = 6V, Temp = 25°C, Fall Time = 88µS
VSHDN
VSHDN
VOUT
VOUT
2001 Microchip Technology Inc. DS21335A
TC1014/TC1015/TC1185-3 01/04/01
9
50mA, 100mA, 150mA CMOS LDOs
with Shutdown and Reference Bypass
TC1014
TC1015
TC1185
TYPICAL CHARACTERISTICS
Load Regulation of 3.3V LDO
Load Regulation of 3.3V LDO
Conditions: CIN = 1µF, COUT = 2.2µF, CBYP = 470pF,
VIN = VOUT + 0.25V, Temp = 25°C
Conditions: CIN = 1µF, COUT = 2.2µF, CBYP = 470pF,
VIN = VOUT + 0.25V, Temp = 25°C
ILOAD = 50mA switched in at 10kHz, VOUT is AC coupled
ILOAD
ILOAD
VOUT
VOUT
Load Regulation of 3.3V LDO
Line Regulation of 3.3V LDO
Conditions: CIN = 1µF, COUT = 2.2µF, CBYP = 470pF,
VIN = VOUT + 0.25V, Temp = 25°C
Conditions: VIN = 4V,+ 1V Squarewave @ 2.5kHz,
ILOAD = 150mA switched in at 10kHz, VOUT is AC coupled
VIN
ILOAD
VOUT
VOUT
CIN = 0µF, COUT = 1µF, CBYP = 470pF,
ILOAD = 100mA, VIN & VOUT are AC coupled
2001 Microchip Technology Inc. DS21335A
TC1014/TC1015/TC1185-3 01/04/01
10
50mA, 100mA, 150mA CMOS LDOs
with Shutdown and Reference Bypass
TC1014
TC1015
TC1185
TYPICAL CHARACTERISTICS
Line Regulation of 5.0V LDO
Thermal Shutdown Response of 5.0V LDO
Conditions: VIN = 6V,+ 1V Squarewave @ 2.5kHz,
Conditions: VIN = 6V,CIN = 0µF, COUT = 1µF
VIN
VOUT
VOUT
CIN = 0µF, COUT = 1µF, CBYP = 470pF,
ILOAD = 100mA, VIN & VOUT are AC coupled
ILOAD was increased until temperature of die reached about 160°C, at which time
integrated thermal protection circuitry shuts the regulator off when die
temperature exceeds approximately 160°C. The regulator remains off until die
temperature drops to approximately 150°C.
2001 Microchip Technology Inc. DS21335A
TC1014/TC1015/TC1185-3 01/04/01
11
50mA, 100mA, 150mA CMOS LDOs
with Shutdown and Reference Bypass
TC1014
TC1015
TC1185
TAPING FORM
Component Taping Orientation for 5-Pin SOT-23A (EIAJ SC-74A) Devices
PIN 1
User Direction of Feed
User Direction of Feed
M a r k i n g
D e v i c e
Device
Marking
W
PIN 1
P
Standard Reel Component Orientation
TR Suffix Device
Reverse Reel Component Orientation
RT Suffix Device
(Mark Right Side Up)
(Mark Upside Down)
Carrier Tape, Number of Components Per Reel and Reel Size
Package
Carrier Width (W)
Pitch (P)
Part Per Full Reel
3000
Reel Size
5-Pin SOT-23A
8 mm
4 mm
7 in
MARKING
ꢀꢀ& ꢁ b = part number code + temperature range and
voltage
5-PIN SOT-23A
(V)
TC1014 Code TC1015 Code TC1185 Code
1.8
2.5
2.7
2.8
2.85
3.0
3.3
3.6
4.0
5.0
AY
A1
A2
AZ
A8
A3
A5
A9
A0
A7
BY
B1
B2
BZ
B8
B3
B5
B9
B0
B7
NY
N1
N2
NZ
N8
N3
N5
N9
N0
N7
ꢂ represents date code
ꢃ represents lot ID number
2001 Microchip Technology Inc. DS21335A
TC1014/TC1015/TC1185-3 01/04/01
12
50mA, 100mA, 150mA CMOS LDOs
with Shutdown and Reference Bypass
TC1014
TC1015
TC1185
PACKAGE DIMENSIONS
5-Pin SOT-23A (EIAJ SC-74A)
.075 (1.90)
REF.
.071 (1.80)
.059 (1.50)
.122 (3.10)
.098 (2.50)
.020 (0.50)
.012 (0.30)
.037 (0.95)
REF.
PIN 1
.122 (3.10)
.106 (2.70)
.057 (1.45)
.035 (0.90)
.010 (0.25)
.004 (0.09)
10° MAX.
.006 (0.15)
.000 (0.00)
.024 (0.60)
.004 (0.10)
Dimensions: inches (mm)
2001 Microchip Technology Inc. DS21335A
TC1014/TC1015/TC1185-3 01/04/01
13
WORLDWIDE
SALES AND
S
ERVICE
New York
150 Motor Parkway, Suite 202
Hauppauge, NY 11788
AMERICAS
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200 Fax: 480-792-7277
Technical Support: 480-792-7627
Web Address: http://www.microchip.com
ASIA/PACIFIC (continued)
Singapore
Microchip Technology Singapore Pte Ltd.
200 Middle Road
#07-02 Prime Centre
Tel: 631-273-5305 Fax: 631-273-5335
San Jose
Microchip Technology Inc.
2107 North First Street, Suite 590
San Jose, CA 95131
Singapore, 188980
Tel: 65-334-8870 Fax: 65-334-8850
Rocky Mountain
Taiwan
Microchip Technology Taiwan
11F-3, No. 207
Tung Hua North Road
Taipei, 105, Taiwan
Tel: 886-2-2717-7175 Fax: 886-2-2545-0139
Tel: 408-436-7950 Fax: 408-436-7955
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7966 Fax: 480-792-7456
Toronto
6285 Northam Drive, Suite 108
Mississauga, Ontario L4V 1X5, Canada
Tel: 905-673-0699 Fax: 905-673-6509
Atlanta
500 Sugar Mill Road, Suite 200B
Atlanta, GA 30350
Tel: 770-640-0034 Fax: 770-640-0307
Austin
Analog Product Sales
8303 MoPac Expressway North
Suite A-201
ASIA/PACIFIC
China - Beijing
Microchip Technology Beijing Office
Unit 915
New China Hong Kong Manhattan Bldg.
No. 6 Chaoyangmen Beidajie
Beijing, 100027, No. China
Tel: 86-10-85282100 Fax: 86-10-85282104
EUROPE
Australia
Microchip Technology Australia Pty Ltd
Suite 22, 41 Rawson Street
Epping 2121, NSW
Austin, TX 78759
Tel: 512-345-2030 Fax: 512-345-6085
Australia
Tel: 61-2-9868-6733 Fax: 61-2-9868-6755
Denmark
Microchip Technology Denmark ApS
Regus Business Centre
Lautrup hoj 1-3
Ballerup DK-2750 Denmark
Tel: 45 4420 9895 Fax: 45 4420 9910
Boston
2 Lan Drive, Suite 120
Westford, MA 01886
Tel: 978-692-3848 Fax: 978-692-3821
China - Shanghai
Microchip Technology Shanghai Office
Room 701, Bldg. B
Far East International Plaza
No. 317 Xian Xia Road
Shanghai, 200051
Boston
Analog Product Sales
Unit A-8-1 Millbrook Tarry Condominium
97 Lowell Road
Concord, MA 01742
France
Tel: 86-21-6275-5700 Fax: 86-21-6275-5060
Arizona Microchip Technology SARL
Parc díActivite du Moulin de Massy
43 Rue du Saule Trapu
Hong Kong
Microchip Asia Pacific
RM 2101, Tower 2, Metroplaza
223 Hing Fong Road
Kwai Fong, N.T., Hong Kong
Tel: 852-2401-1200 Fax: 852-2401-3431
Tel: 978-371-6400 Fax: 978-371-0050
Chicago
333 Pierce Road, Suite 180
Itasca, IL 60143
Tel: 630-285-0071 Fax: 630-285-0075
Dallas
4570 Westgrove Drive, Suite 160
Addison, TX 75001
Tel: 972-818-7423 Fax: 972-818-2924
Batiment A - ler Etage
91300 Massy, France
Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79
Germany
Arizona Microchip Technology GmbH
Gustav-Heinemann Ring 125
D-81739 Munich, Germany
India
Microchip Technology Inc.
India Liaison Office
Divyasree Chambers
Tel: 49-89-627-144 0 Fax: 49-89-627-144-44
1 Floor, Wing A (A3/A4)
No. 11, OíShaugnessey Road
Bangalore, 560 025, India
Tel: 91-80-2290061 Fax: 91-80-2290062
Dayton
Germany
Analog Product Sales
Lochhamer Strasse 13
D-82152 Martinsried, Germany
Tel: 49-89-895650-0 Fax: 49-89-895650-22
Two Prestige Place, Suite 130
Miamisburg, OH 45342
Tel: 937-291-1654 Fax: 937-291-9175
Japan
Detroit
Tri-Atria Office Building
32255 Northwestern Highway, Suite 190
Farmington Hills, MI 48334
Tel: 248-538-2250 Fax: 248-538-2260
Microchip Technology Intl. Inc.
Benex S-1 6F
Italy
Arizona Microchip Technology SRL
Centro Direzionale Colleoni
Palazzo Taurus 1 V. Le Colleoni 1
20041 Agrate Brianza
3-18-20, Shinyokohama
Kohoku-Ku, Yokohama-shi
Kanagawa, 222-0033, Japan
Tel: 81-45-471- 6166 Fax: 81-45-471-6122
Los Angeles
18201 Von Karman, Suite 1090
Irvine, CA 92612
Milan, Italy
Tel: 39-039-65791-1 Fax: 39-039-6899883
Korea
Microchip Technology Korea
168-1, Youngbo Bldg. 3 Floor
Samsung-Dong, Kangnam-Ku
Seoul, Korea
Tel: 949-263-1888 Fax: 949-263-1338
United Kingdom
Arizona Microchip Technology Ltd.
505 Eskdale Road
Winnersh Triangle
Wokingham
Mountain View
Analog Product Sales
1300 Terra Bella Avenue
Mountain View, CA 94043-1836
Tel: 650-968-9241 Fax: 650-967-1590
Tel: 82-2-554-7200 Fax: 82-2-558-5934
Berkshire, England RG41 5TU
Tel: 44 118 921 5869 Fax: 44-118 921-5820
01/09/01
All rights reserved.
©
2001 Microchip Technology Incorporated. Printed in the USA. 1/01
Printed on recycled paper.
Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded by
updates. It is your responsibility to ensure that your application meets with your specifications. No representation or warranty is given and no liability is
assumed by Microchip Technology Incorporated with respect to the accuracy or use of such information, or infringement of patents or other intellectual
property rights arising from such use or otherwise. Use of Microchipís products as critical components in life support systems is not authorized except with
express written approval by Microchip. No licenses are conveyed, implicitly or otherwise, except as maybe explicitly expressed herein, under any intellec-
tual property rights. The Microchip logo and name are registered trademarks of Microchip Technology Inc. in the U.S.A. and other countries. All rights
reserved. All other trademarks mentioned herein are the property of their respective companies.
2001 Microchip Technology Inc. DS21335A
TC1014/TC1015/TC1185-3 01/04/01
14
相关型号:
TC1014-2.85VCTTR
2.85 V FIXED POSITIVE LDO REGULATOR, 0.25 V DROPOUT, PDSO5, SOT-23A, 5 PIN
MICROCHIP
TC1014-2.8VCT
2.8 V FIXED POSITIVE LDO REGULATOR, 0.12 V DROPOUT, PDSO5, SC-74A, SOT-23A, 5 PIN
MICROCHIP
©2020 ICPDF网 联系我们和版权申明