1N4713C-1E3 [MICROSEMI]

Zener Diode, 30V V(Z), 2%, 0.5W, Silicon, Unidirectional, DO-204AH, ROHS COMPLIANT, HERMETIC SEALED, GLASS, DO-35, 2 PIN;
元器件型号: 1N4713C-1E3
生产厂家: MICROSEMI CORPORATION
描述和应用:

Zener Diode, 30V V(Z), 2%, 0.5W, Silicon, Unidirectional, DO-204AH, ROHS COMPLIANT, HERMETIC SEALED, GLASS, DO-35, 2 PIN

测试二极管
PDF文件: 总5页 (文件大小:169K)
下载文档:  下载PDF数据表文档文件
相关参数: 1N4713C-1E3详细参数
是否Rohs认证 符合
生命周期Active
IHS 制造商MICROSEMI CORP
零件包装代码DO-35
包装说明O-LALF-W2
针数2
Reach Compliance Codecompliant
ECCN代码EAR99
HTS代码8541.10.00.50
风险等级5.29
其他特性METALLURGICALLY BONDED
外壳连接ISOLATED
配置SINGLE
二极管元件材料SILICON
二极管类型ZENER DIODE
JEDEC-95代码DO-204AH
JESD-30 代码O-LALF-W2
JESD-609代码e3
元件数量1
端子数量2
最高工作温度175 °C
最低工作温度-65 °C
封装主体材料GLASS
封装形状ROUND
封装形式LONG FORM
峰值回流温度(摄氏度)NOT SPECIFIED
极性UNIDIRECTIONAL
最大功率耗散0.5 W
标称参考电压30 V
子类别Voltage Reference Diodes
表面贴装NO
技术ZENER
端子面层Matte Tin (Sn)
端子形式WIRE
端子位置AXIAL
处于峰值回流温度下的最长时间NOT SPECIFIED
最大电压容差2%
工作测试电流0.05 mA
Base Number Matches1
MAX34334CSE前5页PDF页面详情预览
1N4678-1 thru 1N4717-1
Available on
commercial
versions
500 mW AXIAL-LEADED ZENER DIODES
DESCRIPTION
Screening in
reference to
MIL-PRF-19500
available
The 1N4678-1 thru 1N4717-1 series of 0.5 watt Zener voltage regulators provides a selection
from 1.8 to 43 volts in standard 5% tolerances as well as tighter tolerances. These axial-
leaded glass DO-35 Zeners are available with an internal metallurgical bond similar to military
requirements for similar Zeners. Microsemi also offers numerous other Zener products to
meet higher and lower power applications.
Important:
For the latest information, visit our website
http://www.microsemi.com.
FEATURES
JEDEC registered 1N4678 thru 1N4717 series.
Internal metallurgical bond.
Tighter voltage tolerances of 2% and 1% are available.
Up-screening available in reference to MIL-PRF-19500.
(See
part nomenclature
for all available options).
RoHS compliant devices available (commercial grade only).
DO-35 (DO-204AH)
Package
Also available in:
DO-213AA
(surface mount)
1N4678UR-1 – 1N4717UR-1
APPLICATIONS / BENEFITS
Regulates voltage over a broad operating current and temperature range.
Guaranteed maximum voltage regulation 10 μA to 100 μA.
Voltage selection from 1.8 to 43 V.
Flexible axial-lead mounting terminals.
Non-sensitive to ESD per MIL-STD-750 method 1020.
Minimal capacitance (see
Figure 3).
Inherently radiation hard as described in Microsemi’s “MicroNote
050”.
MAXIMUM RATINGS
Parameters/Test Conditions
Junction and Storage Temperature
(1)
Thermal Resistance Junction-to-Lead
(2)
Thermal Resistance Junction-to-Ambient
(3)
Steady-State Power Dissipation
Forward Voltage @ 200 mA
Solder Temperature @ 10 s
Symbol
T
J
and T
STG
R
ӨJL
R
ӨJA
P
D
V
F
T
SP
Value
-65 to +175
250
310
0.5
1.1
260
Unit
C
C/W
o
C/W
W
V
o
C
o
o
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
Notes:
1. At 3/8 (10 mm) lead length from body.
2. When mounted on FR4 PC board (1 oz Cu) with 4 mm
2
copper pads and track width 1 mm, length 25 mm.
3. At T
L
< 50
o
C 3/8 inch (10 mm) from body or 0.48 W at T
A
< 25
º
C when mounted on FR4 PC board as
described for thermal resistance (see
Figure 2
for derating).
T4-LDS-0240, Rev. 1 (112022)
©2011 Microsemi Corporation
Page 1 of 5
1N4678-1 thru 1N4717-1
MECHANICAL and PACKAGING
CASE: Hermetically sealed axial-lead glass DO-35 (DO-204AH) package.
TERMINALS: Leads tin-lead plated or RoHS compliant matte-tin plating available (on commercial grade only) solderable per
MIL-STD-750, method 2026.
POLARITY: Cathode indicated by band where diode is to be operated with the banded end positive with respect to the opposite
end for Zener regulation.
MARKING: Part number.
TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities.
WEIGHT: 0.2 grams.
See
Package Dimensions
on last page.
PART NOMENCLATURE
MQ
Reliability Level
MQ = JAN Level
MX = JANTX Level
MV = JANTXV Level
MSP = JANS Level
Blank = Commercial
JEDEC type number
(see
Electrical Characteristics
table)
1N4678
C
-1 (e3)
RoHS Compliance
e3 = RoHS Compliant (available
on commercial grade only)
Blank = non-RoHS Compliant
Metallurgically Bonded
Zener Voltage Tolerances
Blank = 5%
C = 2%
D = 1%
Symbol
I
ZT
or I
ZK
I
R
I
ZM
T
SP
V
R
V
Z
SYMBOLS & DEFINITIONS
Definition
Regulator Current: The dc regulator current (I
Z
), at a specified test point (I
ZT
), near breakdown knee (I
ZK
).
Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature.
Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating.
Temperature Solder Pad: The maximum solder temperature that can be safely applied to the terminal.
Reverse Voltage: The reverse voltage dc value, no alternating component.
Zener Voltage: The Zener voltage the device will exhibit at a specified current (I
Z
) in its breakdown region.
T4-LDS-0240, Rev. 1 (112022)
©2011 Microsemi Corporation
Page 2 of 5
1N4678-1 thru 1N4717-1
ELECTRICAL CHARACTERISTICS
@ 25
o
C unless otherwise noted.
NOMINAL
ZENER
VOLTAGE
(Note 3)
V
Z
ZENER TEST
CURRENT
MAXIMUM
VOLTAGE
REGULATION
(Note 2 & 3)
∆V
Z
MAXIMUM REVERSE
LEAKAGE CURRENT
MAXIMUM dc
ZENER
CURRENT*
I
ZM
mA
240
220
200
190
180
170
160
150
140
130
120
110
100
90
70
63.6
58.0
54.8
52.4
49.6
43.2
40.8
38.0
35.0
32.6
30.8
29.0
26.4
25.0
23.8
21.6
19.8
19.0
17.6
17.0
15.8
14.4
13.2
12.2
11.0
JEDEC TYPE
NUMBER
(Note 1)
I
ZT
I
R
@
V
R
µA
Volts
Volts
1N4678-1
1.8
50
0.70
1N4679-1
2.0
50
0.70
1N4680-1
2.2
50
0.75
1N4681-1
2.4
50
0.80
1N4682-1
2.7
50
0.85
1N4683-1
3.0
50
0.90
1N4684-1
3.3
50
0.95
1N4685-1
3.6
50
0.95
1N4686-1
3.9
50
0.97
1N4687-1
4.3
50
0.99
1N4688-1
4.7
50
0.99
1N4689-1
5.1
50
0.97
1N4690-1
5.6
50
0.96
1N4691-1
6.2
50
0.95
1N4692-1
6.8
50
0.90
1N4693-1
7.5
50
0.75
1N4694-1
8.2
50
0.50
1N4695-1
8.7
50
0.10
1N4696-1
9.1
50
0.08
1N4697-1
10.0
50
0.10
1N4698-1
11.0
50
0.11
1N4699-1
12.0
50
0.12
1N4700-1
13.0
50
0.13
1N4701-1
14.0
50
0.14
1N4702-1
15.0
50
0.15
1N4703-1
16.0
50
0.16
1N4704-1
17.0
50
0.17
1N4705-1
18.0
50
0.18
1N4706-1
19.0
50
0.19
1N4707-1
20.0
50
0.20
1N4708-1
22.0
50
0.22
1N4709-1
24.0
50
0.24
1N4710-1
25.0
50
0.25
1N4711-1
27.0
50
0.27
1N4712-1
28.0
50
0.28
1N4713-1
30.0
50
0.30
1N4714-1
33.0
50
0.33
1N4715-1
36.0
50
0.36
1N4716-1
39.0
50
0.39
1N4717-1
43.0
50
0.43
*JEDEC registered data except I
ZM
has been increased (doubled) for 500 mW
NOTES:
1.
2.
3.
µA
Volts
7.5
1.0
5.0
1.0
4.0
1.0
2.0
1.0
1.0
1.0
0.8
1.0
7.5
1.5
7.5
2.0
5.0
2.0
4.0
2.0
10.0
3.0
10.0
3.0
10.0
4.0
10.0
5.0
10.0
5.1
10.0
5.7
1.0
6.2
1.0
6.6
1.0
6.9
1.0
7.6
0.05
8.4
0.05
9.1
0.05
9.8
0.05
10.6
0.05
11.4
0.05
12.1
0.05
12.9
0.05
13.6
0.05
14.4
0.01
15.2
0.01
16.7
0.01
18.2
0.01
19.0
0.01
20.4
0.01
21.2
0.01
22.8
0.01
25.0
0.01
27.3
0.01
29.6
0.01
32.6
power dissipation capabilities.
All types as shown are +/-5% tolerance. Also available in 2% and 1% tolerance.
V
Z
@ 100
µA
minus
V
Z
@ 10
µA.
The electrical characteristics are measured after allowing the device to stabilize for 20 seconds when mounted with 3/8”
minimum lead length from the body.
T4-LDS-0240, Rev. 1 (112022)
©2011 Microsemi Corporation
Page 3 of 5
1N4678-1 thru 1N4717-1
GRAPHS
TEMPERATURE COEFFICIENT mV/
o
C
RATED POWER DISSIPATION - mW
TEMPERATURE COEFFICIENT %/
o
C
Voltage Temperature
Coefficient %/
o
C
mV Change /ºC
T
L
– LEAD TEMPERATURE (
o
C) 3/8” FROM BODY or
T
A
on FR4 PC BOARD
NOMINAL ZENER VOLTAGE (VOLTS)
FIGURE 1
POWER DERATING CURVE
FIGURE 2
ZENER VOLTAGE TEMPERATURE
COEFFICIENT vs. ZENER VOLTAGE
TYPICAL CAPACITANCE IN PICOFARADS
At zero volts
At –2 volts (V
R
)
ZENER VOLTAGE V
Z
FIGURE 3
CAPACITANCE vs. V
Z
CURVE
T4-LDS-0240, Rev. 1 (112022)
©2011 Microsemi Corporation
Page 4 of 5
1N4678-1 thru 1N4717-1
PACKAGE DIMENSIONS
Ltr
BD
BL
LD
LL
LL
1
Dimensions
Inch
Millimeters
Min
Max
Min
Max
.055
.090
1.40
2.29
.120
.200
3.05
5.08
.018
.022
0.46
0.56
1.000
1.500
25.40
38.10
.050
1.27
Notes
3
3
4
NOTES:
1. Dimensions are in inch.
2. Millimeters are given for general information only.
3. Package contour optional within BD and length BL. Heat slugs, if any, shall be included within this cylinder
but shall not be subject to minimum limit of BD. The BL dimension shall include the entire body including
slugs.
4. W ithin this zone lead, diameter may vary to allow for lead finishes and irregularities other than heat slugs.
5. In accordance with ASME Y14.5M, diameters are equivalent to
Φx
symbology.
T4-LDS-0240, Rev. 1 (112022)
©2011 Microsemi Corporation
Page 5 of 5
相关元器件产品Datasheet PDF文档

1N4713CLEADFREE

Zener Diode, 30V V(Z), 2%, 0.5W, Silicon, Unidirectional, DO-35, DO-35, 2 PIN
0 CENTRAL

1N4713CRL

Zener Diode, 30V V(Z), 2%, 0.5W, Silicon, Unidirectional, DO-204AH, HERMETIC SEALED, GLASS, DO-35, 2 PIN
0 MOTOROLA

1N4713CRL

30V, 0.5W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-204AH, HERMETIC SEALED, GLASS, CASE 299, 2 PIN
3 TAK_CHEONG

1N4713CRL2

30V, 0.5W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-204AH, HERMETIC SEALED, GLASS, CASE 299, 2 PIN
1 TAK_CHEONG

1N4713CRL2

30V, 0.5W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-204AH, HERMETIC SEALED, GLASS, DO-35, 2 PIN
0 MOTOROLA

1N4713D

Silicon 250mW Zener Diodes
26 MICROSEMI