2102B100M0000TAS [MICROSEMI]
CMOS Output Clock Oscillator,;型号: | 2102B100M0000TAS |
厂家: | Microsemi |
描述: | CMOS Output Clock Oscillator, |
文件: | 总26页 (文件大小:1219K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
REV
F
DESCRIPTION
DATE
11/8/17 DF/SM
PREP
APPD
HW
CO-28470
Specification, Hybrid TCXO
Hi-Rel Standard
MOUNT HOLLY SPRINGS, PA 17065
THE RECORD OF APPROVAL FOR THIS
DOCUMENT IS MAINTAINED ELECTRONICALLY
WITHIN THE ERP SYSTEM
CODE IDENT NO SIZE DWG. NO.
REV
F
DOC200103
00136
A
UNSPECIFIED TOLERANCES: N/A
SHEET 1 0F 26
1.
SCOPE
1.1
General. This specification defines the design, assembly and functional evaluation of high
reliability, hybrid TCXOs produced by Vectron International. Devices delivered to this
specification represent the standardized Parts, Materials and Processes (PMP) Program
developed, implemented and certified for advanced applications and extended environments.
1.2
Applications Overview. The designs represented by these products were primarily developed
for the MIL-Aerospace community. The lesser Design Pedigrees and Screening Options
imbedded within DOC200103 bridge the gap between Space and COTS hardware by providing
custom hardware with measures of mechanical, assembly and reliability assurance needed for
Military, Ruggedized COTS or Commercial environments.
2.
APPLICABLE DOCUMENTS
2.1
Specifications and Standards. The following specifications and standards form a part of this
document to the extent specified herein. The issue currently in effect on the date of quotation
will be the product baseline, unless otherwise specified. In the event of conflict between the
texts of any references cited herein, the text of this document shall take precedence.
Military
MIL-PRF-55310
MIL-PRF-38534
Oscillators, Crystal Controlled, General Specification For
Hybrid Microcircuits, General Specification For
Standards
MIL-STD-202
MIL-STD-883
Test Method Standard, Electronic and Electrical Component Parts
Test Methods and Procedures for Microelectronics
Vectron International
QSP-90100
DOC007131
Quality Systems Manual, Vectron International
Identification Common Documents, Materials and Processes, Hi-Rel XO
DPA Specification
DOC203982
QSP-91502
Procedure for Electrostatic Discharge Precautions
3.
GENERAL REQUIREMENTS
3.1
Classification. All devices delivered to this specification are of hybrid technology conforming
to Type 3, Class 2 of MIL-PRF-55310. Devices carry a Class 1C ESDS classification per
MIL-PRF-38534 and are marked with a single equilateral triangle at pin 1 per MIL-PRF-
55310.
3.2
Item Identification. External packaging choices are either metal flatpacks or DDIP with either
Sinewave or CMOS logic output. Unique Model Number Series’ are utilized to identify device
package configurations and output waveform as listed in Table 1.
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
2
3.3
3.4
Absolute Maximum Ratings.
a. Supply Voltage Range (VCC):
-0.5Vdc to +7.0Vdc (+5V CMOS)
-0.5Vdc to +5.0Vdc (+3.3V CMOS)
Contact factory for sinewave output
-65°C to +125°C
+150C
+300°C
b. Storage Temperature Range (TSTG):
c. Junction Temperature (TJ):
d. Lead Temperature (soldering, 10 seconds):
Design, Parts, Materials and Processes, Assembly, Inspection and Test.
3.4.1 Design. The ruggedized designs implemented for these devices are proven in military and
space applications under extreme environments. All designs utilize a 4-point crystal mount.
For radiation characteristics, see paragraph 4.1.3. For all Class S and Class B products,
components meet the Element Evaluation requirements of MIL-PRF-55310, Appendix B. If
Design Pedigree Code “E” is chosen, Enhanced Element Evaluation per Appendix A herein
will be performed.
3.4.1.1 Design and Configuration Stability. Barring changes to improve performance by reselecting
passive chip component values to offset component tolerances, there will not be fundamental
changes to the design or assembly or parts, materials and processes after first product delivery
of that item without written approval from the procuring activity.
3.4.1.2 Environmental Integrity. Designs have passed the environmental qualification levels of MIL-
PRF-55310. These designs have also passed extended dynamic levels of at least:
a. Sine Vibration: MIL-STD-202, Method 204, Condition G (30g pk.)
b. Random Vibration: MIL-STD-202, Method 214, Condition II-J (43.92g rms, three
minute duration in each of three mutually perpendicular directions)
c. Mechanical Shock: MIL-STD-202, Method 213, Condition F (1500g, 0.5ms)
3.4.2 Prohibited Parts, Materials and Processes. The items listed are prohibited for use in high
reliability devices produced to this specification.
a. Gold metallization of package elements without a barrier metal.
b. Zinc chromate as a finish.
c. Cadmium, zinc, or pure tin external or internal to the device.
d. Plastic encapsulated semiconductor devices.
e. Ultrasonically cleaned electronic parts.
f. Heterojunction Bipolar Transistor (HBT) technology.
3.4.3 Assembly. Manufacturing utilizes standardized procedures, processes and verification
methods to produce MIL-PRF-55310 Class S / MIL-PRF-38534 Class K equivalent devices.
MIL-PRF-38534 Group B Option 1 in-line inspection is included on levels E and R per
paragraph 7.1 to further verify lot pedigree. Traceability of all components and production lots
are in accordance with MIL-PRF-38534, as a minimum. Tabulated records are provided as a
part of the deliverable data package. Devices are handled in accordance with Vectron
document QSP-91502 (Procedure for Electrostatic Discharge Precautions).
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
3
3.4.4 Inspection. The inspection requirements of MIL-PRF-55310 apply to all devices delivered to
this document. Inspection conditions and standards are documented in accordance with the
Quality Assurance, ISO-9001 derived system of QSP-90100.
3.4.5 Test. The Screening test matrix of Table 4 is tailored for selectable-combination testing to
eliminate costs associated with the development/maintenance of device-specific documentation
packages while maintaining performance integrity.
3.4.6 Marking. Device marking shall be in accordance with the requirements of MIL-PRF-55310.
3.4.7 Ruggedized COTS Design Implementation. Design Pedigree “D” devices (see ¶ 5.2) use the
same robust designs as the other device pedigrees. They do not include the provisions of
traceability or the Class-qualified componentry noted in paragraphs 3.4.3 and 4.1.
4.
DETAIL REQUIREMENTS
Components
4.1
4.1.1 Crystals. Cultured quartz crystal resonators are used to provide the selected frequency for the
devices. Premium Q swept quartz is standard for all Class S level products because of its
superior radiation tolerance. For Class B level products, swept quartz is optional, as required
by the customer. In accordance with MIL-PRF-55310, the manufacturer has a documented
crystal evaluation program.
4.1.2 Passive Components. Passive components will have the same pedigree as the die specified in
paragraph 7.1. Where possible, for Design Pedigrees ‘E’ & ‘R’, Established Reliability (ER)
failure level R and S passive components are employed. Otherwise, all components comply
with the Element Evaluation requirements of MIL-PRF-38534 or Enhanced Element
Evaluation as specified in Appendix A herein. When used, inductors may be open construction
and may use up to 47 gauge wire.
4.1.3 Class S Microcircuits. Microcircuits are procured from wafer lots that have passed MIL-PRF-
38534 Class K Lot Acceptance Tests for Class S devices. Although radiation testing is not
performed at the oscillator level, Design Pedigree Codes E and R versions of this TCXO are
acceptable for use in environments of up to 100krad (Si) total dose as a result of wafer lot
specific RLAT or by analysis of the individual components. Sinewave devices are assembled
with all bipolar semiconductors.
ACMOS devices are assembled with all bipolar
semiconductors with the exception of the ACMOS chip used to provide the CMOS output. An
ACMOS die from a radiation tested and certified wafer lot will be provided for all Class S
versions of this TCXO. This microcircuit is certified for 100krads (Si) total ionizing dose
(TID), RHA level R (2X minimum margin). NSC, as the 54ACT designer, rates the SET LET
at > 40MeV and SEL at >120MeV for the FACT™ family (AN-932). Vectron has conducted
additional SEE testing in 2008 to verify this performance since our lot wafer testing does not
include these parameters and determinations.
A copy of the parts list and materials can be provided for customer review upon request.
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
4
4.1.3.1 Class B Microcircuits. When specified, microcircuits assembled into Pedigree Codes B and C
devices (¶ 5.2a) are procured from wafer lots that have passed MIL-PRF-55310 element
evaluations for Class B devices.
4.1.4 Packages. Packages are procured that meet the construction, lead materials and finishes as
specified in MIL-PRF-55310. All leads are Kovar with gold plating over a nickel underplate.
Package lots are evaluated in accordance with the requirements of MIL-PRF-38534 as
applicable.
4.1.5 Traceability and Homogeneity. All design pedigrees except option D have active device lots
that are homogenous and traceable to the manufacturer’s individual wafer. Swept Quartz
Crystals are traceable to the quartz bar and the processing details of the autoclave lot, as
applicable. All other elements and materials are traceable to their manufacturing lots.
Manufacturing lot and date code information shall be recorded, by TCXO serial number, of
every component and all materials used in the manufacture of that TCXO. All semiconductors
used in the manufacture of a given production lot of TCXOs shall be from the same wafer and
have the same manufacturing lot date code. A production lot, as defined by Vectron, is all
oscillators that have been kitted and assembled as a single group. After the initial kitting and
assembly, this production lot may be divided into multiple sublots to facilitate alignment and
test capacity and may be sealed at multiple times within a 13 week window.
4.2
Mechanical.
4.2.1 Package Outline. Table 1 links each Hi-Rel Standard Model Number of this specification to a
corresponding package style. Mechanical Outline information of each package style is found
in the referenced Figure.
4.2.2 Thermal Characteristics. Because these TCXOs are multichip hybrid designs, the actual θjc to
any one given semiconductor die will vary, but the combined average for all active devices
results in a θjc of approximately 40°C/W. The typical die temperature rise at any one given
semiconductor is 2°C to 4°C. With the oscillator operating at +125°C, the average junction
temperature is approximately +129°C and under no circumstance will it ever exceed the
maximum manufacturer’s rated junction temperature.
4.3
Electrical.
4.3.1 Input Power. CMOS devices are designed for 3.3 ±5% or 5.0 volt ±5% DC operation.
Sinewave devices are designed for 3.3, 5.0, 12.0 or 15.0 volt dc operation with ±5% tolerance.
4.3.2 Temperature Range. Operating range is IAW the chosen temperature stability code.
4.3.3 Frequency Tolerance. Temperature stability includes initial accuracy at +25°C (with EFC),
load ±10% and supply ±5%.
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
5
4.3.4 All devices include an External Frequency Control (EFC) pin for the purpose of externally
setting each TCXO to its nominal frequency. The EFC shall be accomplished by connecting a
resistor or trimmer potentiometer from that Pin to GND. The EFC resistance adjustment range
is 0 or GND to 20K max with Nominal frequency typically occurring in the 5K to 10K
range. Customers will be furnished with the applicable EFC resistor value that can be used to
set each individual device within ±0.2 ppm of nominal frequency at time of shipment.
4.3.5 Frequency Aging. Aging limits, when tested in accordance with MIL-PRF-55310 Group B
inspection, shall not exceed ±1 ppm for the first year and ±5 ppm for 15 years for oscillators
that use crystals in the 10 MHz to 75 MHz range. For oscillators that use crystals greater than
75 MHz, the aging shall not exceed ±2 ppm for the first year and ±10 ppm for 15 years.
4.3.5.1 Frequency Aging Duration Option. By customer request, the Aging test may be terminated
after 15 days if the aging projection is less than the specified aging limit. This is a common
method of expediting 30-day Aging without incurring risk to the hardware and used quite
successfully for numerous customers. It is based on the ‘least squares fit’ determinations of
MIL-PRF-55310 paragraph 4.8.35. Vectron’s automated aging systems acquire data every
four hours, compared to the minimum MIL-PRF-55310 requirement of once every 72 hours.
This makes an extensive amount of data available to perform very accurate aging projections.
The delivered data would include the Aging plots projected to 30 days. If the units would not
perform within that limit then they would continue to the full 30-day term. Please advise by
purchase order text if this may be an acceptable option to exercise as it assists in Production
Test planning.
4.3.6 Operating Characteristics. See Tables 2 and 3. Waveform measurement points and logic
limits are in accordance with MIL-PRF-55310. Start-up time is 10 msec typical and 30 msec
maximum.
4.3.7 Output Load. Standard Sinewave (50 ohms) and CMOS (10kΩ, 15pF) test loads are in
accordance with MIL-PRF-55310.
4.3.8 Phase Noise. Contact factory for typical performance. If custom and/or guaranteed
performance is required, Vectron can assign a custom part number.
5.
QUALITY ASSURANCE PROVISIONS AND VERIFICATION
5.1
Verification and Test. Device lots shall be tested prior to delivery in accordance with the
applicable Screening Option letter as stated by the 16th character of the part number. Table 5
tests are conducted in the order shown and annotated on the appropriate process travelers and
data sheets of the governing test procedure. For devices that require Screening Options that
include MIL-PRF-55310 Group A Testing, the Post-Burn-In Electrical Test and the Group A
Electrical Test are combined into one operation.
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
6
5.1.1 Screening Options. The Screening Options, by letter, are summarized as:
(K) Modified MIL-PRF-38534 Class K Screening, Group A QCI and 30-day aging
(S) MIL-PRF-55310 Class S Screening, Groups A & B QCI
(C) Modified MIL-PRF-55310 Class B Screening, Groups A & B QCI
(B) MIL-PRF-55310 Class B Screening, Groups A & B QCI
(X) Engineering Model (EM)
5.2 Optional Design, Test and Data Parameters. The following is a list of design, assembly,
inspection and test options that can be added by purchase order request.
a. Design Pedigree (choose one as the 5th character in the part number):
(E) Class S components, Enhanced Element Evaluation, Swept Quartz
(R) Class S components, Swept Quartz
(B) Class B components, Swept Quartz
(C) Class B components, Non-Swept Quartz
(D) COTS components, Non-Swept Quartz
b. Input Voltage as the 15th character
c. Frequency-Temperature Slew Test
d. Radiographic Inspection
e. Group C Inspection: MIL-PRF-55310 (requires 8 destruct specimens)
f. Group C Inspection: MIL-PRF-38534, Table C-Xc, Periodic Inspection (requires 10
destruct specimens – 5 pc. [SG 1(5/0), SG 3(3/0)], 5 pc. SG 2 (5/0). Subgroup 1 fine
leak test to be performed per MIL-STD-202, Method 112, Condition C.
g. Internal Water-Vapor Content (RGA) samples and test performance
h. MTBF Reliability Calculations
i. Worst Case/Derating Analysis
j. Deliverable Process Identification Documentation (PID)
k. Customer Source Inspection (pre-cap / final) [Note: Model numbers 2105, 2205, 2115
and 2215 require two pre-cap inspections.]
l. Destruct Physical Analysis (DPA): MIL-STD-1580 with exceptions as specified in
Vectron DOC203982.
m. Qualification: In accordance with MIL-PRF-55310, Table IV (requires 11 destruct
specimens).
n. Qualification: In accordance with EEE-INST-002, Section C4, Table 3, Level 1 or 2
(requires 11 destruct specimens)
o. High Resolution Digital Pre-Cap Photographs (20 Megapixels minimum)
p. Hot solder dip of leads with Sn63/Pb37 solder prior to shipping.
5.2.1 NASA EEE-INST-002. A combination of design pedigrees E or R along with Screening
option S and Group C Inspection in accordance with MIL-PRF-55310, meet the requirements
of Level 1 device reliability. A combination of design pedigrees B or C along with screening
option C and Group C Inspection in accordance with MIL-PRF-55310, meet the requirements
of Level 2 device reliability.
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
7
5.3
5.4
Test Conditions. Unless otherwise stated herein, inspections are performed in accordance with
those specified in MIL-PRF-55310. Process travelers identify the applicable methods,
conditions and procedures to be used. Examples of electrical test procedures that correspond to
MIL-PRF-55310 requirements are shown in Table 3.
Deliverable Data. The manufacturer supplies the following data, as a minimum, with each lot
of devices:
a. Completed assembly and screening lot travelers, including rework history and Certificate
of Conformance.
b. Electrical test variables data, identified by unique serial number.
c. Frequency-Temperature Slew plots, Radiographic data, Group C data and RGA data as
required by purchase order.
d. Traceability, component LAT, enclosure LAT and RLAT (if specifically requested on
the purchase order).
5.5
5.6
Discrepant Material. All MRB authority resides with the procuring activity.
Failure Analysis. Any catastrophic failure (no output, no input current) at Post Burn-In or after
will be evaluated for root cause. The customer will be notified after occurrence and upon
completion of the evaluation.
6. PREPARATION FOR DELIVERY
6.1
Packaging. Devices will be packaged in a manner that prevents handling, ESD and transit
damage during shipping.
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
8
7. ORDERING INFORMATION
7.1
Ordering Part Number. The ordering part number is made up of an alphanumeric series
of 16 characters. Design-affected product options, identified by the parenthetic letter on
the Optional Parameters list (¶ 5.2a and b), are included within the device part number.
The Part Number breakdown is described as:
Screening Option
per Table 4, 5.1.1
2101 R 100M0000 E B S
Model # (Table 1)
Design Pedigree
Input Voltage
A = +3.3V
B = +5V
C = +12V
D = +15V
E = Class S Components,
Enhanced Element Evaluation
Swept Quartz
Temperature Stability
A = ±0.5ppm, 0°C to +50°C
B = ±1ppm, 0°C to +50°C
D = ±1ppm, 0°C to +70°C
F = ±2ppm, 0°C to +70°C
I = ±5ppm, 0°C to +70°C
K = ±1ppm, -20°C to +70°C
M = ±2ppm, -20°C to +70°C
R = ±5ppm, -20°C to +70°C
T = ±2ppm, -40°C to +85°C
V = ±4ppm, -40°C to +85°C
W = ±5ppm, -40°C to +85°C
Y = ±10ppm, -55°C to +105°C
R = Class S Components,
Swept Quartz
B = Class B Components,
Swept Quartz
C = Class B Components, Non-
Swept Quartz
D = Ruggedized COTS: Non-
Swept Quartz, Commercial
Grade Components
7.1.1 Model Number. The device model number is the four (4) digit number assigned to a
corresponding package and output combination per Table 1.
7.1.2 Design Pedigree. Class S designs correspond to letters “E” and “R” and are described in
paragraph 5.2a. Class B variants correspond to either letter “B” or “C” and are described in
paragraph 5.2a. Ruggedized COTS, using commercial grade components, correspond to letter
“D”.
7.1.2.1 Input Voltage. Voltage is the 15th character. Voltage availability is dependant on platform.
7.1.3 Output Frequency. The nominal output frequency is expressed in the format as specified in
MIL-PRF-55310 utilizing eight (8) characters.
7.1.4 Screening Options. The 16th character is the Screening Option selected from Table 4.
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
9
7.2
Optional Design, Test and Data Parameters. Test and documentation requirements above that
of the standard high reliability model shall be specified by separate purchase order line items
(as listed in ¶ 5.2c thru p).
HI-REL
STANDARD
MODEL #
PIN I/O 1/
Gnd/Case
MECHANICAL
OUTLINE
PACKAGE
OUTPUT
Vcc
24
11, 13 12
24
2
14
11, 13 12
24
2
14
24
Out
13
EFC
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
FIGURE 5
FIGURE 6
FIGURE 7
FIGURE 8
FIGURE 9
2101
2102
2103
2104
24 Pin DDIP
CMOS
CMOS
CMOS
CMOS
CMOS
CMOS
CMOS
CMOS
CMOS
Sine
Sine
Sine
Sine
Sine
Sine
Sine
Sine
Sine
12
5
12
1
4
1
6
1
4
1
6
1
1
4
1
6
1
4
1
6
1
32 Lead Flatpack
24 Lead Flatpack
14 Lead Flatpack
14 Lead Flatpack
32 Lead Flatpack
24 Lead Flatpack
14 Lead Flatpack
14 Lead Flatpack
24 Pin DDIP
32 Lead Flatpack
24 Lead Flatpack
14 Lead Flatpack
14 Lead Flatpack
32 Lead Flatpack
24 Lead Flatpack
14 Lead Flatpack
14 Lead Flatpack
13
13
8
1, 3, 7, 12, 14
2, 7, 9, 13
2105
2202 2/
2203 2/
2204 2/
2205 2/
2111
2112
2113
2114
2115
2212 2/
2213 2/
2214 2/
2215 2/
5
12
13
13
8
1, 3, 7, 12, 14
2, 7, 9, 13
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
FIGURE 5
FIGURE 6
FIGURE 7
FIGURE 8
FIGURE 9
13
12
5
12
11, 13 12
24
2
13
13
8
1, 3, 7, 12, 14
2, 7, 9, 13
5
14
11, 13 12
24
2
13
13
8
12
1, 3, 7, 12, 14
2, 7, 9, 13
14
1/. All unassigned pins have no internal connections or ties and may be externally connected to
GND by the customer.
2/. Models 2202 through 2205 and 2212 through 2215 represent lead formed versions.
TABLE 1 - Item Identification and Package Outline
Model Number
2101, 2111
2102, 2202, 2112, 2212
2103, 2203, 2113, 2213
2104, 2204, 2114, 2214
2105, 2205, 2115, 2215
Package
Typical Weight
(Grams)
24 Pin DDIP
21
10
16
19
8
32 Lead Flatpack
24 Lead Flatpack
14 Lead Flatpack
14 Lead Flatpack
TABLE 1A – Typical Weight
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
10
Models 2101, 2102, 2103, 2104, 2105, 2202, 2203, 2204, 2205
Supply Voltage Options1/: +3.3V or +5V
Frequency
Range
(MHz)
Max Current
(mA)
Max tr/tf
(ns)
Duty Cycle
Max CMOS Load
(pF)
(%)
2/
2/
5.25V 3.465V
5.25V
50
3.465V
35
0.300 - 100
50
35
5
40 to 60
1/. Waveform measurement points and logic limits are in accordance with MIL-PRF-55310.
2/. Tested with 15pF.
TABLE 2 - Electrical Performance Characteristics
Model 2111
Supply Voltage Options: +3.3V, +5V, +12V or +15V
Frequency
Range
(MHz)
Max Current
(mA)
Min Power Out
(dBm)
Harmonics/
Subharmonics
(>75MHz)
(dBc)
Spurious
(dBc)
3.3V/5V 12V/15V 3.3V/5V 12V/15V
20 35 +3 +7
10 - 225
< -20
< -70
TABLE 2A - Electrical Performance Characteristics
Models 2112, 2114, 2115, 2212, 2214, 2215
Supply Voltage Options: +3.3V, +5V, +12V or +15V
Frequency
Range
(MHz)
Max Current
(mA)
Min Power Out
(dBm)
Harmonics/
Subharmonics
(>75MHz)
(dBc)
Spurious
(dBc)
3.3V/5V 12V/15V 3.3V 5V 12V/15V
20 35 +3 +7
10 - 150
0
< -20
< -70
TABLE 2B - Electrical Performance Characteristics
Model 2113, 2213
Supply Voltage Options: +12V or +15V
Frequency
Range
(MHz)
Max Current
(mA)
Min Power Out
(dBm)
Harmonics/
Subharmonics
(>75MHz)
(dBc)
Spurious
(dBc)
12V
25
15V
35
12V
+5
15V
+7
10 – 500
< -20
< -70
TABLE 2C - Electrical Performance Characteristics
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
11
REQUIREMENTS AND
CONDITIONS
VECTRON
TEST
OPERATION LISTING
Input Current (no load)
Initial Accuracy @ Ref. Temp.
Output Logic Voltage Levels
Rise and Fall Times
PROCEDURE
GR-51681
GR-51596
GR-51597
GR-51599
GR-51601
GR-37269
DOC005199
DOC005199
GR-61352
MIL-PRF-55310, Para 4.8.5.1
MIL-PRF-55310, Para 4.8.6
MIL-PRF-55310, Para 4.8.21.3
MIL-PRF-55310, Para 4.8.22
MIL-PRF-55310, Para 4.8.23
MIL-PRF-55310, Para 4.8.4
MIL-PRF-55310, Para 4.8.10.1
MIL-PRF-55310, Para 4.8.14
MIL-PRF-55310, Para 4.8.29
Duty Cycle
Overvoltage Survivability
Initial Freq. – Temp. Accuracy
Freq. – Voltage Tolerance
Start-up Time (fast/slow start)
TABLE 3 - Electrical Test Parameters
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
12
SCREENING & TESTING OPTIONS
Option Code
K
S
C
B
X
Screening
(By Class Similarity)
Non-Destruct Wire
Bond Pull
Mil-PRF-38534
Mil-PRF-55310
Mil-PRF-55310
Class ‘B’ modified
Mil-PRF-55310
Engineering
Model (EM)
Class ‘K’
Class ‘S’
Class ‘B’
100%
100%
N/A
N/A
N/A
M883, Method
2017 for Class
‘H’
M883, Method
2017 for Class
‘H’
M883, Method 2017
M883, Method 2017
M883, Method 2017
Internal Visual
for Class ‘K’
for Class ‘K’
for Class ‘H’
48 hrs min @
48 hrs min @
48 hrs min @
48 hrs min @
24 hrs min @
Stabilization Bake
Thermal Shock
+150C
+150C
+150C
+150C
+150C
M883, Method 1011, M883, Method 1011,
TC ‘A’ TC ‘A’
N/A
N/A
N/A
M883, Method 1010, M883, Method 1010, M883, Method 1010,
TC ‘B’ TC ‘B’ TC ‘B’
M883, Method
1010, TC ‘B’
M883, Method
2001, TC ‘A’
(5000 g, Y1
Temperature Cycling
N/A
M883, Method 2001, M883, Method 2001, M883, Method 2001,
Constant Acceleration
TC ‘A’ (5000 g, Y1
TC ‘A’ (5000 g, Y1
TC ‘A’ (5000 g, Y1
N/A
Axis only)
Axis only)
Axis only)
Axis only)
M883, Method 2020, M883, Method 2020, M883, Method 2020,
PIND
N/A
N/A
@ +25C only
N/A
TC ‘B’
TC ‘B’
TC ‘B’
Electrical Test
Frequency, Output
levels, Input Current
@ +25C only
@ +25C only
@ +25C only
@ +25C only
1st Burn-In
+125C for 160
+125C for 160 hours +125C for 240 hours +125C for 160 hours
(Powered with load)
hours
Electrical Test
Frequency, Output
levels, Input Current
@ +25C & Temp
@ +25C & Temp
@ +25C & Temp
@ +25C &
N/A
Extremes
Extremes
Extremes
Temp Extremes
2nd Burn-In
N/A
N/A
N/A
N/A
N/A
N/A
N/A
+125C for 160 hours
(Powered with load)
Electrical Test
Frequency, Output
levels, Input Current
@ +25C & Temp
N/A
Extremes
2% applies to Input
Current @ +25C
Post 2ND Burn-in
Electrical Test
10% applies to
Input Current
@ +25C
2% applies to Input
Current @ +25C
10% applies to Input
Current @ +25C
PDA
N/A
Radiographic
M883, Method 2012
100%
M883, Method 2012
100%
M883, Method 2012
100%
N/A
N/A
100%
N/A
Seal Test
(fine & gross)
100%
Sample per
Mil-PRF-55310
Sample per
Mil-PRF-55310
Group ‘A’ Inspection
100%
100%
Group ‘B’ Inspection
(30 day Aging @
+70C)
Sample per
Mil-PRF-55310
Sample per
Mil-PRF-55310
100%
100%
N/A
TABLE 4 - Screening & Test Matrix
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
13
FIGURE 1
Models 2101 & 2111 Package Outline
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
14
FIGURE 2
Models 2102 & 2112 Package Outline
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
15
FIGURE 3
Models 2103 & 2113 Package Outline
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
16
FIGURE 4
Models 2104 & 2114 Package Outline
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
17
FIGURE 5
Model 2105 and 2115 Package Outline
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
18
FIGURE 6
Models 2202 and 2212 Package Outline and Land Pattern
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
19
FIGURE 7
Models 2203 and 2213 Package Outline and Land Pattern
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
20
FIGURE 8
Models 2204 and 2214 Package Outline and Land Pattern
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
21
FIGURE 9
Model 2205 and 2215 Package Outline and Land Pattern
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
22
Appendix A
ENHANCED ELEMENT EVALUATION
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
23
MICROCIRCUIT ENHANCED ELEMENT EVALUATION
Mil-PRF-
38534
Subgroup Class
K
Test
Mil-STD-883
Quantity
Reference
Paragraph
Method
Condition
(accept number)
Element Electrical
A. May perform at wafer level
B. All failures shall be removed
from the lot
1
X
100%
C.3.3.1
C. Perform at room ambient
2
3
4
X
X
Element Visual
Internal Visual
2010
2010
100%
10(0) or 22(0)
(See Notes 1 & 2)
C.3.3.2
C.3.3.3
C.3.3.4.2
X
X
Temperature Cycling
Mechanical Shock
or
1010
2002
C
B, Y1
direction
3,000 G, Y1
direction
C.3.3.3
10(0)
22(0)
(See Notes 1 & 2)
Constant Acceleration
2001
X
X
Interim Electrical
Burn-In
C.3.3.4.3
240 hours
minimum at
+125°C
1015
1005
X
X
X
Post Burn-In Electrical
Steady State Life
Final Electrical
C.3.3.4.3
C.3.3.4.3
10(0) wires or
20(1) wires
See method 2018
& Note 2
C.3.3.3
C.3.3.5
5
6
X
X
Wire Bond Evaluation
SEM
2011
2018
C.3.3.6
NOTES:
1. Subgroups 3, 4, & 5 shall be performed on a sample of 10 die if the wafer lot is from a QPL/QML line. If the die are
from commercial wafer lots, then the sample size shall be 22 die. Die from QPL/QML wafers not meeting the QPL/QML
requirements and downgraded to commercial grade shall not be used.
2. Subgroups 3, 4 & 5 shall be performed in the order listed in Table 1. Subgroup 6 may be performed at any time.
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
24
SEMICONDUCTOR ENHANCED ELEMENT EVALUATION
Mil-PRF-
38534
Subgroup Class
K
Test
Mil-STD-750
Quantity
Reference
Paragraph
Method
Condition
(accept number)
Element Electrical
A. May perform at wafer level
B. All failures shall be removed
from the lot
Perform at room
ambient
1
2
X
100%
C.3.3.1
C.3.3.2
2069, 2070,
2072, 2073
2069, 2070,
X
X
Element Visual
Internal Visual
100%
10(0) or 22(0)
(Notes 1 & 2)
C.3.3.3
C.3.3.4.2
C.3.3.3
3
4
2072, 2073, 2074
X
X
Temperature Cycling
Surge Current
(when applicable)
1051
4066
C
A or B as
specified
X
Constant Acceleration
2006
2001
Y1 direction
20,000 G /
10,000 G for
Pd ≥ 10W
10(0)
22(0)
(See Notes 1 & 2)
X
X
Interim Electrical
C.3.3.4.3
1039
1042
1038
A
B
A
High Temperature
Reverse Bias (HTRB)
Complete
Within 16 hrs of
HTRB
X
Interim Electrical & Delta
completion
1039, 1042
1038
B, A
B
X
X
Burn-In 240 hours
1040
Post Burn-In Electrical
C.3.3.4.3
1026
1037
1042
1048
Steady State Life
1000 hours or equivalent
per MIL-PRF-19500
X
X
X
Final Electrical
C.3.3.4.3
C.3.3.3
C.3.3.5
10(0) wires or
20(1) wires
See method 2018
or 2077 & Note 2
5
6
Wire Bond Evaluation
2011
2018
2077
X
SEM
C.3.3.6
NOTES:
1. Subgroups 3, 4, & 5 shall be performed on a sample of 10 die if the wafer lot is from a QPL/QML line. If the die are
from commercial wafer lots, then the sample size shall be 22 die. Die from QPL/QML wafers not meeting the QPL/QML
requirements and downgraded to commercial grade shall not be used.
2. Subgroups 3, 4 & 5 shall be performed in the order listed in Table 1. Subgroup 6 may be performed at any time.
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
25
PASSIVE COMPONENTS ENHANCED ELEMENT EVALUATION
Requirements
Paragraph
Part Type
Test
Sample Size
Allowable Rejects
Ceramic capacitors (Production lot definition shall be per M55681 or M123 for chips, or M49470 T-level for stacks)
M55681 FRL S or M123
(chips)
N/A
N/A
N/A
N/A
DSCC Dwg COTS (chips)
Ultrasonic scan or CSAM
Group A
M123
M123
100%
M123
N/A
M123
Group B, Subgroups 1 &
2
M123
N/A
M123
M123
T-level M49470 (stacked)
General purpose M49470,
DSCC dwg or COTS
(stacked)
N/A
N/A
100%
N/A
N/A
Ultrasonic scan or CSAM M49470 for T-level
Group A
M49470 for T-level
M49470 for T-level
M49470 for T-level
Group B, Subgroups 2, 4
& 5b
M49470 for T-level
M49470 for T-level
M49470 for T-level
Tantalum Chip Capacitors (Note: Stacking tantalum chips will require a repeat of the entire Group A in M55365 with
minimum Weibull C and surge current option C. Production lot definition shall be per M55365.)
Group A (Weibull C
M55365
minimum with surge
current option C)
M55365
M55365
M55365
Group A (Weibull C
minimum with surge
current option C)
DSCC Dwg, COTS
M55365
M55365
M55365
M55365
M55365
M55365
Group C
Resistor Chips (Note: Gluing one resistor chip on top of another to change a design or save on real estate is not allowable
without extensive design/process verification, long term testing, and hybrid re-qualification. Production lot definition shall be
per M55342).
M55342 FRL R or S
DSCC Dwg, COTS
N/A
N/A
N/A
N/A
Group A
Group B
M55342 for T-level
M55342 for T-level
M55342 for T-level
M55342 for T-level
M55342 for T-level
M55342 for T-level
Inductors (See Paragraph 4.1.2)
Magnetics, Closed Construction Leaded and Surface Mount (transformers, inductors, coils) (Note: Stacking magnetics shall be
qualified and the effects of the long term performance of the hybrids verified. When stacking magnetics, a repeat of the thermal
cycling plus electrical measurements as specified in Group A of Mil-Std-981. Design, workmanship and materials/processes
shall conform to MIL-STD-981 requirements).
Magnetics, Open Construction are unencapsulated and unpotted self-leaded parts consisting of magnet wire wound around a
magnetic core. These parts are fully visually inspectable. Open construction magnetics shall be subjected to 100% electrical
measurements and visual inspection per Mil-Std-981.
Custom closed magnetics
Group A
Group B
Mil-STD-981
Mil-STD-981
Mil-STD-981
Mil-STD-981
Mil-STD-981
Mil-STD-981
CODE IDENT NO.
UNSPECIFIED TOLERANCES
SIZE
DWG NO.
REV.
SHEET
F
A
00136
N/A
DOC200103
26
相关型号:
2102CHIP
Variable Capacitance Diode, Very High Frequency to Ultra High Frequency, 11.5pF C(T), 22V, Silicon, Hyperabrupt, DIE
APITECH
©2020 ICPDF网 联系我们和版权申明