469-02 [MICROSEMI]
SINGLE PHASE 10 AMP RECTIFIER BRIDGES; 单相10安整流桥
| 型号： | 469-02 |
| 厂家： | 
Microsemi |
| 描述： | SINGLE PHASE 10 AMP RECTIFIER BRIDGES |
| 文件： | 总3页 (文件大小：197K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
469-01, 469-02, and 469-03
SINGLE PHASE 10 AMP
RECTIFIER BRIDGES
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
This series of high-current single-phase bridge rectifiers are constructed with
hermetically sealed rectifiers with the same design and construction as used in
military applications for the utmost in reliability. They can also be optionally obtained
with formal military screened diodes that have been subjected to 100% screening and
military qualified to MIL-PRF-19500/469 that are ideal for high-reliability applications
where a failure cannot be tolerated. These industry-recognized 10 Amp rated rectifier
bridges with working peak reverse voltages from 200 to 600 volts for each leg use
diodes that are hermetically sealed with voidless-glass construction using an internal
“Category I” metallurgical bond. Microsemi also offers numerous other rectifier
products to meet higher and lower current ratings with various recovery time speed
requirements including fast and ultrafast device types in both through-hole and
surface mount packages.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
Voidless hermetically sealed glass packages used
internally for each leg
•
•
•
•
•
•
•
Conversion of single phase ac to dc current flow
Working Peak Reverse Voltages 200 to 600 V
•
•
•
•
•
Triple-layer passivation
Military and other high-reliability applications
High forward surge current capability
Low thermal resistance
Extremely robust construction
Inherently radiation hard as described in Microsemi
MicroNote 050
Internal “Category I” Metallurgical bonds
JANTX and JANTXV available per MIL-PRF-19500/469
Controlled Avalanche Characteristics
Surge ratings of 100 Amps
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
•
•
Junction Temperature: -65oC to +150oC
Storage Temperature: -65oC to +150oC
•
•
CASE: Epoxy filled case with hermetically sealed
void-less hard glass rectifiers with Tungsten slugs
TERMINALS: Nickel plated brass with optional hot
Tin-Lead solder dip
Maximum Avg Output Current: 10 Amps @ TC = 55°C
and 6 Amps @ TC = 100°C. Derate @ 88 mA / oC
between 55°C and 100°C. Derate @ 120 mA/ oC
above 100°C.
•
•
MARKING: Part number on one side of case
POLARITY: Marked on body adjacent to terminals
(see terminal polarity marking on last page and
flattened corner on case for pin 1)
•
•
Non-repetitive Forward Surge Current (8.3 ms half
sine): 100 Amps @ TC = 55°C
Solder temperatures (terminals): 260oC for 10 s
(maximum)
•
•
WEIGHT: 7.7 grams
See package dimensions on last page
ELECTRICAL CHARACTERISTICS
MINIMUM
BREAKDOWN
VOLTAGE
Per Leg
WORKING
PEAK
AVERAGE
RECTIFIED
CURRENT
AVERAGE
RECTIFIED
CURRENT
MAXIMUM REVERSE
CURRENT PER LEG
IR @ VRWM
FORWARD
VOLTAGE
VF @ 15.7 A
(pk) @ 8.3 ms
Duty Cycle
≤ 2%
TYPE
REVERSE
RECOVERY
trr
REVERSE
VOLTAGE
VRWM
IO1
@
IO2 @
TC=+55oC
Note 1
TC=+100oC
Note 2
VBR
Note 3
@50μA
TC = 25°C
TC = 100°C
VOLTS
VOLTS
Volts
1.35
1.35
1.35
AMPS
10
10
AMPS
μA
2
2
μA
μs
2.5
2.5
2.5
469-01
469-02
469-03
240
460
660
200
400
600
6
6
6
125
125
125
10
2
NOTE 1: Rated at TC = 55ºC with reference to metal case. Derate linearly at 88 mA/ºC between TC = 55ºC and TC = 100ºC
NOTE 2: Derate linearly at 120 mA/ºC above TC = 100ºC.
NOTE 3: IF = 0.5 A, IRM = 1.0 A, IR(REC) = .250 A
NOTE 4: Point at which TC is referenced shall be in metal part of case as shown in drawing on last page.
Copyright © 2009
11-05-09 Rev B; 469-1.pdf
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
469-01, 469-02, and 469-03
SINGLE PHASE 10 AMP
RECTIFIER BRIDGES
S C O T T S D A L E D I V I S I O N
SYMBOLS & DEFINITIONS
Symbol
Definition
Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current.
VBR
Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating
temperature range excluding all transient voltages (ref JESD282-B). Also sometimes known as PIV.
Average Rectified Output Current: The Output Current averaged over a full cycle with a 50 Hz or 60 Hz sine-
wave input and a 180 degree conduction angle.
Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current.
Maximum Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and
VRWM
IO
VF
IR
temperature.
Reverse Recovery Time: The time interval between the instant the current passes through zero when
changing from the forward direction to the reverse direction and a specified decay point after a peak reverse
current occurs.
t
rr
GRAPHS
FIGURE 1
Copyright © 2009
11-05-09 Rev B; 469-1.pdf
Microsemi
Page 2
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
469-01, 469-02, and 469-03
SINGLE PHASE 10 AMP
RECTIFIER BRIDGES
S C O T T S D A L E D I V I S I O N
PACKAGE DIMENSIONS
Copyright © 2009
11-05-09 Rev B; 469-1.pdf
Microsemi
Page 3
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
相关型号：
469-1.000MHZ-DM
HCMOS/TTL Output Clock Oscillator, 1MHz Nom, ROHS COMPLIANT, RESISTANCE WELDED PACKAGE-14/4
FOX
469-40.000MHZ-DM
HCMOS/TTL Output Clock Oscillator, 40MHz Nom, ROHS COMPLIANT, RESISTANCE WELDED PACKAGE-14/4
FOX
469-FREQ-DM
HCMOS/TTL Output Clock Oscillator, 1MHz Min, 40MHz Max, ROHS COMPLIANT, RESISTANCE WELDED PACKAGE-14/4
FOX
©2020 ICPDF网 联系我们和版权申明