EX-4010-DAP-2080-10M0000000 [MICROSEMI]
HCMOS Output Clock Oscillator, 10MHz Nom, SMD-14/5;型号: | EX-4010-DAP-2080-10M0000000 |
厂家: | Microsemi |
描述: | HCMOS Output Clock Oscillator, 10MHz Nom, SMD-14/5 |
文件: | 总5页 (文件大小:10011K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EX-401
Evacuated Miniature Crystal Oscillator
EX-401
Description
The EX-401 provides exceptionally low aging rates and tight temperature stabilities in an extremely small package over a wide
range of environmental conditions. This EMXO series bridges the gap between current large, high precision OCXO’s and smaller
TCXO’s. The EX-401 Series becomes the most economical choice where there is a need for spectral purity, short and long term
stability, along with small size and dramatically reduced power consumption.
Features
Applications
• Mobile Data Communications
• Military Portable Radio
• Satellite Communications
• Airborne Equipment
• Avionics
• Instrumentation
• Marine/Land Seismic
• Low Power Consumption Precision Oscillator
• Fast Warm-up
• Low Phase Noise
• Good Aging
• Small Form Factor
• SMD and Thru-Hole Mounting Option
• RoHS Compliant
• Standard Frequencies: 10MHz, 20MHz and 100MHz
• Design/Material Sourcing/Manufacture/Test in MHS,PA COO:USA
• No ITAR Restriction for importing EAR99
• Previous Model Number: EX-380, EX-400 series
Performance Specifications
Frequency Stabilities1
Parameter
Min
Typ
Max
Units
Condition
vs. operating temperature range
(See temperature & stability table)
±10
±20
±30
ppb
ppb
ppb
0… +50°C
-20… +70°C
-40… +85°C
vs. aging / day (See aging table)
vs. aging / per year
vs. aging / 10 years
±1.0
±100
±1
ppb
ppb
ppm
after 30 days of operation
Initial Accuracy
vs. supply voltage change
vs. load change
-0.2
-5
-5
+0.2
+5
+5
ppm
ppb
ppb
at time of shipment
VS ± 5%
Load ± 5%
Warm-up Time
45
60
sec.
sec.
to ± 1 ppm of final frequency (1 hour)
to ± 100 ppb of final frequency (1 hour)
Supply Voltage (Vs)
Supply voltage (Standard)
Supply voltage (Option)
4.75
3.14
5.0
3.3
5.25
3.46
VDC
VDC
1.5
0.25
0.30
Watts
Watts
Watts
during warm-up
steady state @ +25°C / 3.3 Vdc
steady state @ +25°C / 5.0 Vdc
Power Consumption
Vectron International • 267 Lowell Road, Unit 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
1 of 5
Performance Specifications
Parameter
Min
Typ
15
Max
Units
Condition
Signal [Standard]
HCMOS
Load
pF
Signal Level (Vol)
0.1 Vs
VDC
0.8 Vs
0.8 Vs
VDC
VDC
Vs = 3.3 Vdc
Vs = 5.0 Vdc
Signal Level (Voh)
5
3
ns
ns
%
10MHz to 29.999MHz , (10 % - 80 %)
30MHz to 100MHz , (10 % - 80 %)
Rise \ Fall Time
Rise \ Fall Time
Duty cycle
45
55
Sinewave
Signal [Standard]
Load
50
ohm
Output Power [Standard]
Output Power [Option]
Output Power [Option]
0
+3
+5
+4
+7
+9
dBm
dBm
dBm
50 Ohm load
50 Ohm load
50 Ohm load
-30
dBc
50 Ohm load
Harmonics
Frequency Tuning (EFC)
2.7
4.2
2.9
4.4
VDC
VDC
Vs = 3.3 Vdc
Vs = 5.0 Vdc
Reference Voltage (Vref)
Tuning Voltage
Tuning Range
Tuning Slope
0
+Vref
VDC
See tuning range table
Positive
Additional Parameters
-90
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
1 Hz
10 Hz
100 Hz
1 KHz
10 KHz
-125
-145
-160
-165
Phase Noise (10 MHz)
-95
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
10 Hz
100 Hz
1 KHz
10 KHz
100 KHz
-125
-150
-160
-165
Phase Noise (100 MHz)
Allan Deviation (10 MHz)
0.02
ppb
Tau = 1 sec
Acceleration Sensitivity
Weight
1.0
5
ppb/g
grams
Total Gamma
Absolute Maximum Ratings
5.5
VDC
Supply Voltage
Output Load
50
pF
°C
°C
-55
-55
+85
+85
Operable temperature range
Storage temperature range
Standard Environmentals
Vibration Sine
MIL-STD-202, Method 204, Condition G (30g peak, 10Hz-2000Hz)
Vibration Random
MIL-STD-202, Method 214, Condition I-H (30g RMS, 10Hz-2000Hz)
Shock
Solderability
MIL-STD-202, Method 213, Condition E (1000g, 0.5ms, 1/2 sine)
MIL-STD-883, Method 2003
Vectron International • 267 Lowell Road, Unit 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
2 of 5
Outline Drawing / Enclosure
Surface Mounture
Thru-hole (5 Pin)
Thru-hole (4 Pin)
ure
LABEL
LABEL
LABEL
[13.46] MAX
.530 MAX
[13.46] MAX
.530 MAX
[13.46] MAX
.530 MAX
[11.43] MAX
.450 MAX
[11.43] MAX
.450 MAX
[11.43] MAX
.450 MAX
[.64] MAX
.025 MAX
(ALL 4 SIDES)
[.64] MAX
.025 MAX
(ALL 4 SIDES)
[.64] MAX
.025 MAX
(ALL 4 SIDES)
DOTS INDICATE PIN 1
DOTS INDICATE PIN 1
DOTS INDICATE PIN 1
[9.02] MAX
.355 MAX .260 REF
[6.60]
[9.02] MAX
.355 MAX
[6.60]
.260 REF
[9.02] MAX
.355 MAX
[6.60]
.260 REF
3.71±0.254
.146±.010
3.71±0.254
.146±.010
0.51
.020
0.51
.020
15.24
.600
15.24
.600
15.24
.600
0.50
R.020
2.54
.100
2.54
.100
1.73
.068
1
2
7
7
1
2
7
1
1.73
.068
7.62
.300
12.70±0.254
.500±.010
7.62
.300
12.70±0.254
.500±.010
12.70±0.254
.500±.010
14
8
14
8
14
8
20.32±0.508
.800±.020
20.32±0.508
.800±.020
20.32±0.508
.800±.020
Pin Connections
Pin Connections
Pin
1
Function
1
EFC Input
EFC Input
7
Ground (Case)
RF Output
2
Vref Output
Ground (Case)
RF Output
8
7
14
Supply Voltage Input
8
14
SupplyVoltage Input
Standard Shipping Method
Vectron International • 267 Lowell Road, Unit 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
3 of 5
Recommended Reflow Profiles for Pb-Free & Sn-Pb
tp
Critical Zone
Tp
TL
TL to Tp
Ramp up
Ramp dow n
tL
Ts
Ts
ts
preheat
25
t 25°C to peak
Time
230°C Reflow Profile
Profile Feature
Sn-Pb Assembly
Profile Feature
Sn-Pb Assembly
Average ramp-up rate (TL to TP)
3°C/seconds max.
Time 25°C to Peak Temperature
4 minutes max.
Preheat - Temperature min Tsmin
- Temperature Min Tsmax
- Time (min to max) (ts)
135°C
Time maintained above
- Temperature (TL)
- Time (tL)
155°C
183°C
60-90 seconds
45-60 seconds
Tsmax to TL -Ramp-up Rate
Time maintained above - Temperature (TL)
- Time (TL)
3°C/seconds max.
183°C
Time within 5°C of actual
Peak Temperature (tp)
Ramp-down Rate
10-20 seconds max.
6°C/seconds max.
40-60 seconds
max 230°C
Peak Temperature (Tp)
Note: All temperatures refer to topside of the package, measured on the package body surface.
260°C Reflow Profile
Profile Feature
Pb-Free Assembly
Profile Feature
Pb-Free Assembly
Average ramp-up rate (TL to TP)
3°C/seconds max.
Time 25°C to Peak Temperature
8 minutes max.
Preheat - Temperature min Tsmin
- Temperature min Tsmax
- Time (min to max) (ts)
150°C
Time maintained above
- Temperature (TL)
- Time (tL)
200°C
217°C
60-180 seconds
3°C/seconds max.
217°C
60-150 seconds
Tsmax to TL -Ramp-up Rate
Time maintained above - Temperature (TL)
- Time (TL)
Time within 5°C of actual
Peak Temperature (tp)
Ramp-down Rate
20-40 seconds max.
6°C/seconds max.
60-150 seconds
max 260°C
Peak Temperature (Tp)
Note: All temperatures refer to topside of the package, measured on the package body surface.
Vectron International • 267 Lowell Road, Unit 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
4 of 5
Ordering Information
EX - 401 0 - D A P - 108 0 - 10M0000000
Product Family
EX: EMXO
Frequency
XXMXXXXXXX
Package
13x 20mm
Configuration
Frequency Control
0: Fixed Frequency (HCMOS)
1: Fixed Frequency (0 dBm)
2: Fixed Frequency (+3 dBm)
3: Electrical Tuning (HCMOS)
4: Electrical Tuning (0 dBm)
5: Electrical Tuning (+3 dBm)
6: Fixed Frequency (+5 dBm)
7: Electrical Tuning (+5 dBm)
0: Surface Mount
1: Thru-hole (5 Pin)
2: Thru-hole (4 Pin)
Stability Code
108: ±10ppb
208: ±20ppb
308: ±30ppb
508: ±50ppb
758: ±75ppb
107: ±100ppb
(
S
ee Note 2)
ee Note 2)
See Note 2)
(S
Supply Voltage
D: 5 Vdc
E: 3.3 Vdc
(
(S
ee Note 2)
RF Output Code
A: HCMOS
E: Sinewave
Temperature Range
A: -55°C to +85°C
E: -40°C to +85°C
J: -20°C to +70°C
P: 0°C to +50°C
Temperature Range and Stability Table
( Temperature Stability Reference to (Fmax-Fmin)/2 )
Stability/Temperature A: -55°C to +85°C E: -40°C to +85°C J: -20°C to +70°C P: 0°C to +50°C
108 (+/-10ppb)
208 (+/-20ppb)
308 (+/-30ppb)
508 (+/-50ppb)
758 (+/-75ppb)
107 (+/-100ppb)
10-20MHz
10-20MHz
10-20MHz
10-50MHz
10-100MHz
10-100MHz
10-20MHz
10-20MHz
10-50MHz
10-100MHz
10-100MHz
10-20MHz
10-50MHz
10-80MHz
10-100MHz
10-20MHz
10-50MHz
10-100MHz
10-100MHz
Aging Table
Frequency Range
Daily Rate Yearly Rate
(ppb/day) (ppb/year)
Tuning Range
(ppm)
10MHz to 15MHz
>15MHz to 50MHz
>50MHz
1
ꢀ
ꢀ
100
ꢀ00
ꢀ00
1
ꢀ
Not Available
Notes:
1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies.
2. Electrical Tuning Option available up to 50MHz. Only fixed Frequency Option beyond 50MHz output frequency.
(+/-10ppb)
208 (+/-20ppb)
308 (+/-30ppb)
10-30MHz
3. Unless otherwise stated, all values are valid after warm-up time and refer to typical conditions for supply voltage,
10-30MHz
10-30MHz
frequency control voltage, load, and temperature (25°C).
4. Phase noise degrades with increasing output frequency.
5. Subject to technical modification.
6. Contact factory for availability.
For Additional Information, Please Contact
USA:
Europe:
Asia:
Vectron International
267 Lowell Road, Unit 102
Hudson, NH 03051
Tel: 1.888.328.7661
Vectron International
Vectron International
68 Yin Cheng Road(C), 22nd Floor
One LuJiaZui
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 3328.4784.17
Pudog, Shanghai 200120, China
Tel: 86.21.6194.6886
Fax: 1.888.329.8328
Fax: +49 (0) 3328.4784.30
Fax: 86.21.6194.6699
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.
No rights under any patent accompany the sale of any such product(s) or information.
Rev: 4/13/2017 JV
Vectron International • 267 Lowell Road, Unit 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
5 of 5
相关型号:
©2020 ICPDF网 联系我们和版权申明