LX5250 [MICROSEMI]
9-Line Multimode SCSI Terminator; 9线多模SCSI终结者型号: | LX5250 |
厂家: | Microsemi |
描述: | 9-Line Multimode SCSI Terminator |
文件: | 总8页 (文件大小:188K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LX5250/5252
®
9-Line Multimode SCSI Terminator
TM
PRODUCTION DATA SHEET
KEY FEATURES
DESCRIPTION
Compliant with SCSI SPI-2
(Ultra2), SPI-3 (Ultra160), and
SPI-4 (Ultra320)
Auto-Selectable LVD or Single-
Ended Termination
Fast Response, No Output
Capacitors Required
Compatible with Active Negation
Drivers
15µA Supply Current in
Disconnect Mode
Logic Command Disconnects All
Termination Lines
Diffsense Line Driver
Ground Driver Integrated for
Single-Ended Operation
Current Limit and Thermal
Protection
Hot-Swap Compatible (Single-
Ended)
Available in 36-pin QSOP and 28-
pin TSSOP package
LX5250, 36-pin QSOP: Pin
Compatible With DS2118,
UCC5630A and UCC5672
LX5250 28-pin TSSOP: Pin
Compatible with DS2119, and
UCC5672
The LX5250/52 is a multimode SCSI 1.4V. In application this pin is tied to the
terminator that is compatible with the DIFFSENSE input of the corresponding LVD
SCSI SPI-2 (Ultra2 SCSI), SCSI SPI-3 transceivers. This action enables the LVD
(Ultra3 SCSI or Ultra160 SCSI), and transceiver function. DIFFSENSE is capable of
SCSI SPI-4 (Ultra320) specifications supplying a maximum of 10mA.
developed by the T10 standards
committee for low voltage differential
(LVD) termination, while providing
backwards compatibility to the SCSI,
Tying the DIFFSENSE pin high places the
LX5250/52 in a HI Z state indicating the
presence of an HVD device. Tying the pin low
places the part in a single-ended mode while
also signaling the multimode transceiver to
operate in a single-ended mode.
Recognizing the needs of portable and
configurable peripherals, the LX5250/52 has a
TTL compatible sleep/disable mode. During
this sleep/disable mode, power dissipation is
reduced to a meager 15uA while also placing
all outputs in a HI Z state. Also during
sleep/disable mode, the DIFFSENSE function
is disabled and is placed in a HI Z state.
The LX5250/52 also provides a master /
slave function. Driving this pin high or
floating the pin enables the 1.3V DIFFSENSE
reference. Driving the pin low disables the on
board DIFFSENSE reference and enables use
of an external master reference device.
SCSI-2,
and
SPI
single-ended
specifications. Multimode compatibility
permits the use of legacy devices on the
bus without hardware alterations.
Automatic mode selection is achieved
through voltage detection on the
Diffsense line.
The LX5250/52 utilizes an industry
standard
LVD
architecture.
The
individual high bandwidth drivers
maximize channel separation, reduce
channel-to-channel noise and cross talk
to insure Ultra320 performance.
When the LX5250/52 is enabled, the
differential sense (DIFFSENSE) pin
supplies a voltage between 1.2V and
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
PRODUCT HIGHLIGHT
-
-
LX5250/
LX5252
LX5250/
LX5252
+
+
PACKAGE ORDER INFO
QSOP
36-Pin
TSSOP
28-Pin
RoHS Compliant / Pb-free
Transition DC: 0518
DB
PW
TA (°C)
RoHS Compliant / Pb-free
Transition DC: 0535
LX5250CDB
LX5252CDB
LX5250CPW
-
0 to 70
Note: Available in Tape & Reel.
Append the letters “TR” to the part number. (i.e. LX5250CDB-TR)
Copyright © 2002
Rev. 1.2b, 2005-08-29
Microsemi
Page 1
Integrated Products Division
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
LX5250/5252
®
9-Line Multimode SCSI Terminator
TM
PRODUCTION DATA SHEET
ABSOLUTE MAXIMUM RATINGS
PACKAGE PIN OUT
Term Power (VTERM).........................................................................................-0.3V to 7V
Operating Junction Temperature ................................................................................150°C
Storage Temperature Range………………………………………………..-65°C to 150°C
RoHS / Pb-free Peak Package Solder Reflow Temperature
1
2
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
NC
VTERM
HVD
NC
NC
1+
1-
3
LVD
SE
9-
4
5
6
2+
9+
(40 second maximum exposure)................................................................... 260°C (+0, -5)
7
2-
8-
8+
8
HEATSINK
HEATSINK
HEATSINK
9
HEATSINK
HEATSINK
HEATSINK
7-
7+
6-
Note: Exceeding these ratings could cause damage to the device. All voltages are with respect to
Ground. Currents are positive into, negative out of specified terminal.
10
11
12
13
14
3+
3-
4+
4-
15
16
17
18
5+
5-
6+
DIFFB
DIFFSENSE
M/Sb
DISCONNECT
THERMAL DATA
GND
LX5250/5252
36 Pin QSOP
DB
DB PACKAGE
(Top View)
53.9°C/W
100°C/W
THERMAL RESISTANCE-JUNCTION TO AMBIENT, θJA
N/C = Not internally connected
28 Pin TSSOP
PW
VTERM
NC
1
2
28
27
26
25
24
23
22
21
20
19
18
17
16
15
NC
1+
THERMAL RESISTANCE-JUNCTION TO AMBIENT, θJA
9-
9+
8-
3
1-
2+
2-
4
5
8+
6
NC
Junction Temperature Calculation: TJ = TA + (PD x θJA).
NC
7-
7+
6-
7
3+
3-
4+
4-
5+
5-
8
The θJA numbers are guidelines for the thermal performance of the device/pc-board
system. All of the above assume no ambient airflow. θJA can vary significantly
depending on mounting technique. (See Application Notes Section: Thermal
considerations)
9
10
11
12
13
14
6+
DIFFB
DIFFSENSE
M/Sb
DISCONNECT
GND
MASTER/SLAVE FUNCTION TABLE
LX5250 ONLY
PW PACKAGE
(Top View)
Master/Slave
DIFFSENSE Status
N/C = Not internally connected
RoHS / Pb-free 100% Matte Tin Lead Finish
L*
HI Z
1.3V
1.3V
0mA
H
10mA Source
10mA Source
Open (Pull-Up)
* When in Low state, terminator will sense state of DIFFSENSE line.
DIFFSENSE/POWER UP/POWER DOWN FUNCTION TABLE
Outputs
LX5252
LX5250
DISCONNECT
Quiescent
Current
DIFFSENSE
DISCONNECT
Status
Type
L
H
< 0.5V
0.7V – 1.9V
> 2.4V
Enable
Enable
Disable
Disable
SE
55mA
35mA
8mA
L
L
H
H
LVD
HI-Z
HI-Z
H or Open
L or Open
X
10µA
Copyright © 2002
Rev. 1.2b, 2005-08-29
Microsemi
Page 2
Integrated Products Division
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
LX5250/5252
®
9-Line Multimode SCSI Terminator
TM
PRODUCTION DATA SHEET
RECOMMENDED MAX OPERATING CONDITIONS
LX5250/52
Typ
Parameter
Symbol
Units
Min
Max
LVD
SE
2.9
3.5
5.25
5.25
VTerm
VTERM
V
Signal Line Voltage
0
0
0
5.0
VTERM
125
V
V
Disconnect Input Voltage
Operating Junction Temperature
TJ
°C
ELECTRICAL CHARACTERISTICS
Unless otherwise specified, the following specifications apply over the operating ambient temperature 0°C ≤ TA ≤ 70°C, VTerm = 4.75V.
For the LX5250, DISCONNECT = L; for the LX5252, DISCONNECT = H.
LX5250/52
Min Typ Max
Parameter
Symbol
Test Conditions
Units
LVD Terminator Section
`
All term lines open
35
15
45
35
mA
µA
LX5250: DISCONNECT > 2.0V;
LX5252: DISCONNECT < 0.8V
VTerm Supply Current
LVDICC
Common Mode Voltage
Offset Voltage
VCM
VOS
ZO
1.125 1.25 1.375
V
mV
Ω
Open circuit between (-) and (+) terminals
VOUT Differential = -1V to +1V
100
100
110
112
105
150
125
110
195
Differential Terminator Impedance
Common Mode Impedance
ZCM
0.5V to 2V
Ω
LX5250: DISCONNECT > 2.0V;
LX5252: DISCONNECT < 0.8V
Output Capacitance (Note 1)
CO
tDF
3
pF
Mode Change Delay
Diffsense = 1.4V to 0V
100
115
1.3
300
ms
Diffsense Section
`
`
Diffsense Output Voltage
Diffsense Output Source Current
Diffsense Sink Current
Single Ended Section
VDIFF
IDIFF
1.2
5
1.4
15
V
VDIFF = 0V
mA
µA
ISINK(DIFF) VDIFF = 2.75V
20
200
All tem lines = Open, Master/Slave = 0V
All tem lines = 0.2V, Master/Slave = 0V
LX5250: DISCONNECT > 2.0V;
55
250
75
290
mA
mA
VTerm Supply Current
SEICC
15
35
µA
LX5252: DISCONNECT < 0.8V
Termination Output High Voltage
Output Current
VO
IO
2.5
2.85
3.1
24
V
VOUT = 0.2V
18.5 22.5
40 65
mA
mA
pF
Sink Current
ISINK
CO
VOUT = 4V, All lines
Output Capacitance (Note 1)
DISC > 2.0V
3
2
LX5250: DISCONNECT > 2.0V;
LX5252: DISCONNECT < 0.8V,
IDDQ
µA
V
LINE = 0 to 4V, TA = 25°
Output Leakage
LX5250: DISCONNECT > 2.0V;
LX5252: DISCONNECT < 0.8V,
V
IHP
ZG
1
µA
TERM = Open, VLINE = 2.7V, TA = 25°
Ground Driver Impedance
I = 1mA
100
Ω
Copyright © 2002
Rev. 1.2b, 2005-08-29
Microsemi
Page 3
Integrated Products Division
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
LX5250/5252
®
9-Line Multimode SCSI Terminator
TM
PRODUCTION DATA SHEET
ELECTRICAL CHARACTERISTICS
Unless otherwise specified, the following specifications apply over the operating ambient temperature 0°C ≤ TA ≤ 70°C, VTerm = 4.75V.
For the LX5250, DISCONNECT = L; for the LX5252, DISCONNECT = H.
LX5250/52
Min Typ Max
Parameter
Symbol
Test Conditions
Units
DISCONNECT Section
`
`
Disconnect Thresholds
VTH
IIL
0.8
2.0
10
V
LX5250: DISCONNECT = 0V;
µA
LX5252: DISCONNECT = 2.4V
LX5250: DISCONNECT = 2.4V;
LX5252: DISCONNECT = 0V
Input Current
IIH
100
100
nA
MASTER/SLAVE Section
Master/Slave Thresholds
VTH(MS)
0.8
2.0
10
V
IIL(MS)
IIH(MS)
Master/Slave = 0V
Master/Slave = 2.4V
µA
nA
Input Current
Note 1: Guaranteed by design.
BLOCK DIAGRAM
22.4mA
I-Limited
2.7V
1 of 9
Terminator
Pairs
VTERM
36
Source
1.07 mA
SE
LVD
LVD(-)
/SE
5
4
HVD
52.5
SE
DISC
DISCONNECT
17
LVD
LVD(+)
/SE (Pseudo-GND)
150
HVD
52.5
1.25V
20
10mA
I-Limited
1.3V
1.07 mA
M/S
19
Source
GND
18
POWER
ON
&
MODE
DELAY
SE
HVD
Window
Comp.
DIFSENSE
20
20K
LVD
DISC
DIFFB
21
33
SE
LATCH
35 HVD
34 LVD
Figure 1 – LX5250/52 Block Diagram; 36-pin version shown
Copyright © 2002
Rev. 1.2b, 2005-08-29
Microsemi
Page 4
Integrated Products Division
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
LX5250/5252
®
9-Line Multimode SCSI Terminator
TM
PRODUCTION DATA SHEET
FUNCTIONAL PIN DESCRIPTION
PIN NAME
DESCRIPTION
1-, 2-, 3-, 4-, 5-, 6-, 7-, 8-, 9-
Negative signal termination lines for LVD mode. Signal termination lines for SE mode.
Positive signal termination lines for LVD mode. Psuedo-ground lines for SE mode.
1+, 2+, 3+, 4+, 5+, 6+, 7+, 8+, 9+
Power supply pin for terminator. Connect to SCSI bus VTERM. Must be
decoupled by one 4.7µF low-ESR capacitor for every three terminator devices. It is
absolutely necessary to connect this pin to the decoupling capacitor through a very low
impedance (big traces to PCB). Keeping distances very short from the decoupling
capacitors is somewhat layout dependent and some applications may benefit from high
frequency decoupling with 0.1µF capacitors at VTERM pin.
VTERM
Enables/Disables terminator. See Power Down Function Table for logic levels
for LX5250 and LX5252.
DISCONNECT
GND
Terminator ground pin. Connect to ground.
Sometimes referred to as M/S pin in this datasheet. Used to select which terminator is the
controlling device. M/S pin High or Open enables the DIFFSENSE output drive. Please
see MASTER/SLAVE Function Table.
MASTER/SLAVE
This is a dual function pin. It drives the SCSI bus DIFFSENS line. It is also the sense pin
to detect the SCSI bus mode (LVD, SE, or HVD). DIFFSENSE output drive can be
disabled with low level on the M/S pin. Please see DIFFSENSE and MASTER/SLAVE
Function Tables. Internally connected to DIFFB pin through a 20K Ω resistor.
DIFFSENSE
Internally connected to DIFFSENSE pin through a 20K Ω resistor. It can be used as a
mode sense pin when the device is non-controlling terminator (M/S is low). An RC filter
(50K Ω resistor & 4.7µF) is not required on the LX5250 as it has an internal timer.
DIFFB
SE
Single-Ended output; when High, terminator is operating in SE mode.
LVD
Low Voltage Differential output; when High, terminator is operating in LVD mode.
High Voltage Differential output; when High, terminator is operating in HVD mode.
HVD
Attached to die mounting pad, but not bonded to GND pin. Pins should be considered a
heat sink only, and not a true ground connection. It is recommended that these pins be
connected to ground, but can be left floating.
HEATSINK
Copyright © 2002
Rev. 1.2b, 2005-08-29
Microsemi
Page 5
Integrated Products Division
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
LX5250/5252
®
9-Line Multimode SCSI Terminator
TM
PRODUCTION DATA SHEET
APPLICATION SCHEMATIC
PERIPHERAL
HOST
TERMPOWER
DISCONNECT
TERMPOWER
DISCONNECT
1-
VTERM
1-
VTERM
1+
1+
Data Lines (9)
9-
9+
9-
9+
LX5250/52
LX5250/52
DISC
DISC
GND
NC*
GND
DIFFSENS
DIFFB
DIFFSENS
DIFFB
NC*
50k
50k
Pin 1
Pin 1
4.7uF
4.7uF
4.7uF
4.7uF
4.7uF
4.7uF
1-
VTERM
1-
VTERM
1+
1+
Data Lines (9)
9-
9-
9+
9+
LX5250/52
LX5250/52
DISC
DISC
GND
GND
DIFFSENS
DIFFSENS
DIFFB
DIFFB
NC*
NC*
Pin 1
Pin 1
4.7uF
4.7uF
1-
VTERM
1-
VTERM
1+
1+
Control Lines (9)
9-
9-
9+
9+
LX5250/52
LX5250/52
DISC
DISC
GND
GND
NC*
DIFFSENS
DIFFB
DIFFSENS
DIFFB
NC*
Pin 1
Pin 1
4.7uF
4.7uF
*The capacitor on pin 1 can be placed on the LX5250CDB, LX5250CPW, or LX5252CDB to be pin-compatible with other devices, but is not required.
Figure 2 – Application Diagram
Copyright © 2002
Rev. 1.2b, 2005-08-29
Microsemi
Integrated Products Division
Page 6
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
LX5250/5252
®
9-Line Multimode SCSI Terminator
TM
PRODUCTION DATA SHEET
MECHANICAL DRAWINGS
36-Pin Quarter Size Outline Package (QSOP)
DB
MILLIMETERS
INCHES
Dim
MIN
2.14
0.29
0.23
15.20
7.40
MAX
2.54
0.51
0.32
15.40
7.60
MIN
0.084
0.011
MAX
0.100
0.020
36
19
A
B
C
D
E
0.009 0.0125
E P
0.598
0.291
0.606
0.299
F
0.80 BSC
0.031 BSC
1
18
G
H
L
M
P
*LC
0.10
2.44
0.51
0°
0.30
2.64
1.01
8°
10.51
0.10
0.004
0.096
0.020
0°
0.012
0.104
0.040
8°
0.004
0.004
B
F
D
E
A
H
M
C
10.11
0.398
G
L
−
−
*Lead Coplanarity
28-Pin Thin Small Shrink Outline (TSSOP)
PW
MILLIMETERS
INCHES
Dim
MIN
0.85
0.19
0.09
9.60
4.30
MAX
MIN
MAX
A
B
C
D
E
0.95
0.30
0.20
9.80
4.50
0.033
0.007
0.003
0.378
0.169
0.037
0.012
0.008
0.390
.176
3 2 1
P
E
F
G
H
L
M
P
0.65 BSC
0.025 BSC
F
0.05
–
0.50
0.15
1.10
0.75
8°
0.002
–
0.020
0.005
0.043
0.030
8°
D
A
H
0°
0°
L
SEATING PLANE
B
C
G
6.25
–
6.50
0.10
0.246
–
0.256
0.004
M
*LC
Note:
1. Dimensions do not include mold flash or protrusions;
these shall not exceed 0.155mm(.006”) on any side.
Lead dimension shall not include solder coverage.
Copyright © 2002
Rev. 1.2b, 2005-08-29
Microsemi
Page 7
Integrated Products Division
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
LX5250/5252
®
9-Line Multimode SCSI Terminator
TM
PRODUCTION DATA SHEET
NOTES
PRODUCTION DATA – Information contained in this document is proprietary to
Microsemi and is current as of publication date. This document may not be modified in
any way without the express written consent of Microsemi. Product processing does not
necessarily include testing of all parameters. Microsemi reserves the right to change the
configuration and performance of the product and to discontinue product at any time.
Copyright © 2002
Rev. 1.2b, 2005-08-29
Microsemi
Integrated Products Division
Page 8
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
相关型号:
©2020 ICPDF网 联系我们和版权申明