MSPPLAD15KP130AE3 [MICROSEMI]
Trans Voltage Suppressor Diode, 15000W, 130V V(RWM), Unidirectional, 1 Element, Silicon, ROHS COMPLIANT, PLASTIC PACKAGE-1;型号: | MSPPLAD15KP130AE3 |
厂家: | Microsemi |
描述: | Trans Voltage Suppressor Diode, 15000W, 130V V(RWM), Unidirectional, 1 Element, Silicon, ROHS COMPLIANT, PLASTIC PACKAGE-1 局域网 二极管 |
文件: | 总5页 (文件大小:247K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PLAD15KP5.0 thru PLAD15KP400CA, e3
15,000 W SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
These Microsemi 15 kW Transient Voltage Suppressors (TVSs)
are designed for applications requiring protection of voltage-
sensitive electronic devices that may be damaged by harsh or
severe voltage transients including lightning per IEC61000-4-5 and
classes with various source impedances described herein. This
series is available in 5.0 to 400 volt standoff voltages (VWM) in both
unidirectional and bidirectional offered in one surface mount
device. Microsemi also offers numerous other TVS products to
meet higher and lower power demands and special applications.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
Available in both Unidirectional and Bidirectional
construction (Bidirectional with C or CA suffix)
• Protection from switching transients and induced RF
• Protection from ESD, and EFT per IEC 61000-4-2
•
•
•
•
Low profile surface mount
and IEC 61000-4-4
Available in tape-and-reel or waffle pack
Selections for 5.0 to 400 volts standoff voltages (VWM
• Secondary lightning protection per IEC61000-4-5 with
42 Ohms source impedance:
Class 1,2,3,4: PLAD15KP5.0A to 400A or CA
Class 5: PLAD15KP5.0A to 400A or CA
)
Suppresses transients up to 15,000 watts @ 10/1000 µs
(see Figure 1)
• Secondary lightning protection per IEC61000-4-5 with
•
•
Fast response
12 Ohms source impedance:
Optional 100% screening for avionics grade is
available by adding MA prefix to part number for added
100% temperature cycle -55oC to +150oC (10X) as well
as surge (3X) and 24 hours HTRB with post test VZ &
IR (in the operating direction for unidirectional or both
directions for bidirectional)
Class 1,2,3,4: PLAD15KP5.0A to 400A or CA
• Secondary lightning protection per IEC61000-4-5 with
2 Ohms source impedance:
Class 2,3: PLAD15KP5.0A to 400A or CA
Class 4: PLAD15KP5.0 to 54A or CA
•
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, JANTXV, and JANS are also
available by adding MQ, MX, MV, or MSP prefixes
respectively to part numbers.
• Pin injection protection per RTCA/DO-160D for
Waveform 4 (6.4/69 µs):
Level 4: PLAD15KP5.0A to 400A or CA
Level 5: PLAD15KP5.0A to 100A or CA
•
•
Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
• Pin injection protection per RTCA/DO-160D for
Waveform 5A (40/120 µs):
Level 4: PLAD15KP5.0A to 28A or CA
RoHS compliant devices available by adding “e3” suffix
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
• Operating and Storage temperature: -55ºC to +150ºC
•
•
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
• Peak Pulse Power dissipation at 25ºC: 15,000 watts at
10/1000 μs (also see Figures 1 and 2)
TERMINALS: Tin-Lead or RoHS Compliant
annealed matte-Tin plating readily solderable per
MIL-STD-750, method 2026
• Impulse repetition rate (duty factor): 0.05%
• tclamping (0 volts to V(BR) min.): < 100 ps theoretical for
•
•
MARKING: Body marked with part number
unidirectional and < 5 ns for bidirectional
• Thermal resistance: 0.2 C/W junction to case or 50ºC/W
junction to ambient when mounted on FR4 PC board with
recommended mounting pad (see last page)
POLARITY: Band denotes cathode. Bidirectional
not marked for polarity
•
•
WEIGHT: 1 gram (approximate)
• Steady-State Power dissipation: 50 watts at TC = 100oC
with good heat sink, or 2.5 watts at TA = 25ºC if mounted on
FR4 PC board as described for thermal resistance
TAPE & Reel: Standard per EIA-481-B (add “TR”
suffix to part number)
•
See package dimensions on last page
• Forward Surge Voltage: 3.5 V maximum @ 500 Amps 8.3
ms half-sine wave (unidirectional devices only)
• Solder temperatures: 260 ºC for 10 s (maximum)
Copyright © 2006
7-19-2006 REV D
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
PLAD15KP5.0 thru PLAD15KP400CA, e3
15,000 W SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
S C O T T S D A L E D I V I S I O N
ELECTRICAL CHARACTERISTICS
MAXIMUM
MAXIMUM
STANDBY
CURRENT
ID
MAXIMUM
PEAK PULSE
CURRENT
REVERSE
MAXIMUM
TEMPERATURE
COEFFICIENT
OF V(BR)
CLAMPING
VOLTAGE
VC
BREAKDOWN
STAND-OFF
MICROSEMI
VOLTAGE
VOLTAGE
PART
V(BR)
IPP (FIG. 3)
VWM
NUMBER
(Note 1)
(Note 2)
@ IPP
@ VWM
αV(BR
)
V(BR)
@
I(BR)
VOLTS
VOLTS
5.0
5.0
6.0
6.0
6.5
6.5
7.0
7.0
7.5
7.5
8.0
8.0
8.5
8.5
9.0
9.0
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
20
20
22
22
24
24
26
VOLTS
mA
150
150
150
150
150
150
150
150
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
μA
15000
15000
15000
15000
6000
6000
3000
3000
750
750
450
450
150
150
120
60
45
45
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
A
mV/ ºC
4.0
4.0
4.0
4.0
4.0
4.0
5.0
5.0
6.0
6.0
6.0
6.0
7.0
7.0
8.0
8.0
9.0
9.0
10
10
11
11
12
12
13
13
15
15
18
16
19
18
20
19
24
22
27
24
30
27
33
29
34
30
38
35
41
38
45
40
50
45
54
49
57
51
62
55
65
PLAD15KP5.0
PLAD15KP5.0A
PLAD15KP6.0
PLAD15KP6.0A
PLAD15KP6.5
PLAD15KP6.5A
PLAD15KP7.0
PLAD15KP7.0A
PLAD15KP7.5
PLAD15KP7.5A
PLAD15KP8.0
PLAD15KP8.0A
PLAD15KP8.5
PLAD15KP8.5A
PLAD15KP9.0
PLAD15KP9.0A
PLAD15KP10
PLAD15KP10A
PLAD15KP11
PLAD15KP11A
PLAD15KP12
PLAD15KP12A
PLAD15KP13
PLAD15KP13A
PLAD15KP14
PLAD15KP14A
PLAD15KP15
PLAD15KP15A
PLAD15KP16
PLAD15KP16A
PLAD15KP17
PLAD15KP17A
PLAD15KP18
PLAD15KP18A
PLAD15KP20
PLAD15KP20A
PLAD15KP22
PLAD15KP22A
PLAD15KP24
PLAD15KP24A
PLAD15KP26
PLAD15KP26A
PLAD15KP28
PLAD15KP28A
PLAD15KP30
PLAD15KP30A
PLAD15KP33
PLAD15KP33A
PLAD15KP36
PLAD15KP36A
PLAD15KP40
PLAD15KP40A
PLAD15KP43
PLAD15KP43A
PLAD15KP45
PLAD15KP45A
PLAD15KP48
PLAD15KP48A
PLAD15KP51
PLAD15KP51A
6.40 – 7.30
6.40 – 7.00
6.67 – 8.15
6.67 – 7.37
7.22 – 8.82
7.22 – 7.98
7.78 – 9.51
7.78 – 8.60
8.33 – 10.2
8.33 – 9.21
8.89 – 10.9
8.89 – 9.83
9.44 – 11.5
9.44 – 10.4
10.0 – 12.2
10.0 – 11.1
11.1 – 13.6
11.1 – 12.3
12.2 – 14.9
12.2 – 13.5
13.3 – 16.3
13.3 – 14.7
14.4 – 17.6
14.4 – 15.9
15.6 – 19.1
15.6 – 17.2
16.7 – 20.4
16.7 – 18.5
17.8 – 21.8
17.8 – 19.7
18.9 – 23.1
18.9 – 20.9
20.0 – 24.4
20.0 – 22.1
22.2 – 27.1
22.2 – 24.5
24.4 – 29.8
24.4 – 26.9
26.7 – 32.6
26.7 – 29.5
28.9 – 35.3
28.9 – 31.9
31.1 – 38.0
31.1 – 34.4
33.3 – 40.7
33.3 – 36.8
36.7 – 44.9
36.7 – 40.6
40.0 – 48.9
40.0 – 44.2
44.4 – 54.3
44.4 – 49.1
47.8 – 58.4
47.8 – 52.8
50.0 – 61.1
50.0 – 55.3
53.3 – 65.1
53.3 – 58.9
56.7 – 69.3
56.7 – 62.7
9.6
9.2
1620
1629
1317
1455
1221
1341
1134
1251
1350
1164
999
1101
942
1041
885
975
798
882
747
822
681
753
630
696
582
645
564
318
528
576
492
543
465
516
417
462
381
423
348
384
321
357
297
330
279
309
255
282
234
258
210
234
195
216
186
207
174
195
165
183
11.4
10.3
12.3
11.2
13.3
12.0
14.3
12.9
15.0
13.6
15.9
14.4
16.9
15.4
18.8
17.0
20.1
18.2
22.0
19.9
23.8
21.5
25.8
23.2
26.9
24.4
28.8
26.0
30.5
27.6
32.2
29.2
35.8
32.4
39.4
35.5
43.0
38.9
46.6
42.1
50.1
45.5
53.5
48.4
59.0
53.3
64.3
58.1
71.4
64.5
46.7
69.4
80.3
72.7
85.5
77.4
91.1
82.4
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
26
28
28
30
30
33
33
36
36
40
40
43
43
45
45
48
10
10
10
10
48
51
51
5
5
5
60
Copyright © 2006
7-19-2006 REV D
Microsemi
Page 2
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
PLAD15KP5.0 thru PLAD15KP400CA, e3
15,000 W SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
S C O T T S D A L E D I V I S I O N
MAXIMUM
CLAMPING
VOLTAGE
VC
REVERSE
STAND-
MAXIMUM
TEMPERATURE
COEFFICIENT
OF V(BR)
MAXIMUM
STANDBY
CURRENT
ID
MAXIMUM
PEAK PULSE
CURRENT
BREAKDOWN
OFF
MICROSEMI
PART
NUMBER
(Note 2)
VOLTAGE
VOLTAGE
VWM
(Note 1)
V(BR)
IPP (FIG. 3)
@ IPP
@ VWM
αV(BR
)
V(BR)
@
I(BR)
VOLTS
VOLTS
54
54
58
58
60
60
64
64
70
70
75
75
78
78
85
85
VOLTS
mA
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
μA
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
A
156
171
147
159
141
156
132
147
120
132
111
123
108
120
99
108
93
102
84
93
78
84
70
78
65
71
56
62
52
58
49
55
47
52
42
47
38
42
37
35.5
mV/ ºC
70
64
77
69
79
70
85
75
93
84
100
90
104
94
113
102
120
109
134
122
147
132
161
145
174
157
202
183
216
195
229
207
242
219
269
243
297
269
306
318
344
368
430
490
PLAD15KP54
PLAD15KP54A
PLAD15KP58
PLAD15KP58A
PLAD15KP60
PLAD15KP60A
PLAD15KP64
PLAD15KP64A
PLAD15KP70
PLAD15KP70A
PLAD15KP75
PLAD15KP75A
PLAD15KP78
PLAD15KP78A
PLAD15KP85
PLAD15KP85A
60.0 – 73.3
60.0 – 66.3
64.4 – 78.7
64.4 – 71.2
66.7 – 81.5
66.7 – 73.7
71.1 – 86.9
71.1 – 78.6
77.8 – 95.1
77.8 – 86.0
83.3 – 102.0
83.3 – 92.1
86.7 – 106.0
86.7 – 95.8
94.4 – 115.0
94.4 – 104.0
100 – 122
100 – 111
111 – 136
111 – 123
122 – 149
122 – 135
133 – 163
133 – 147
144 – 176
144 – 159
167 – 204
167 – 185
178 – 218
178 – 197
189 – 231
189 – 209
200 – 244
200 – 221
222 – 271
222 – 245
245 – 299
245 – 271
278 – 308
289 – 320
311 – 345
333 – 369
389 – 431
444 - 492
96.3
87.1
103.0
93.6
107.0
96.8
114.0
103.0
125
113
134
121
139
126
151
137
160
146
179
162
196
177
214
193
231
209
268
243
287
259
304
275
321
291
356
322
293
356
403
419
451
483
564
644
PLAD15KP90
90
90
PLAD15KP90A
PLAD15KP100
PLAD15KP100A
PLAD15KP110
PLAD15KP110A
PLAD15KP120
PLAD15KP120A
PLAD15KP130
PLAD15KP130A
PLAD15KP150
PLAD15KP150A
PLAD15KP160
PLAD15KP160A
PLAD15KP170
PLAD15KP170A
PLAD15KP180
PLAD15KP180A
PLAD15KP200
PLAD15KP200A
PLAD15KP220
PLAD15KP220A
PLAD15KP250
PLAD15KP260A
PLAD15KP280A
PLAD15KP300A
PLAD15KP350A
PLAD15KP400A
100
100
110
110
120
120
130
130
150
150
160
160
170
170
180
180
200
200
220
220
250
260
280
300
350
400
33
31
26.5
23
NOTE 1: Transient Voltage Suppressors are normally selected with reverse “Stand Off Voltage” VWM which should
be equal to or greater than the dc or continuous peak operating voltage level.
NOTE 2: For bidirectional construction, indicate a C or CA suffix after the part number.
SYMBOLS & DEFINITIONS
Symbol
VWM
PPP
Definition
Working Peak (Standoff) Voltage
Peak Pulse Power
Symbol
Definition
IPP
VC
Peak Pulse Current
Clamping Voltage
V(BR)
ID
Breakdown Voltage
Standby Current
I(BR)
Breakdown Current for V(BR)
Copyright © 2006
7-19-2006 REV D
Microsemi
Page 3
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
PLAD15KP5.0 thru PLAD15KP400CA, e3
15,000 W SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
S C O T T S D A L E D I V I S I O N
GRAPHS
tp – Pulse Time – sec
FIGURE 1
Peak Pulse Power vs. Pulse Time to 50% of
Exponentially Decaying Pulse
TL Lead Temperature oC
Test waveform parameters: tr=10 μs, tp=1000 μs
FIGURE 2
Pulse Waveform
FIGURE 3
Derating Curve
Copyright © 2006
7-19-2006 REV D
Microsemi
Page 4
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
PLAD15KP5.0 thru PLAD15KP400CA, e3
15,000 W SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
S C O T T S D A L E D I V I S I O N
PACKAGE AND MOUNTING PAD DIMENSIONS Inches [mm]
Copyright © 2006
7-19-2006 REV D
Microsemi
Scottsdale Division
Page 5
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
相关型号:
MSPPLAD15KP130ATR
Trans Voltage Suppressor Diode, 15000W, 130V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC PACKAGE-1
MICROSEMI
MSPPLAD15KP130CA
Trans Voltage Suppressor Diode, 15000W, 130V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC PACKAGE-1
MICROSEMI
MSPPLAD15KP130CAE3TR
Trans Voltage Suppressor Diode, 15000W, 130V V(RWM), Bidirectional, 1 Element, Silicon, ROHS COMPLIANT, PLASTIC PACKAGE-1
MICROSEMI
MSPPLAD15KP130CE3
Trans Voltage Suppressor Diode, 15000W, 130V V(RWM), Bidirectional, 1 Element, Silicon, ROHS COMPLIANT, PLASTIC PACKAGE-1
MICROSEMI
MSPPLAD15KP130CE3TR
Trans Voltage Suppressor Diode, 15000W, 130V V(RWM), Bidirectional, 1 Element, Silicon, ROHS COMPLIANT, PLASTIC PACKAGE-1
MICROSEMI
MSPPLAD15KP130CTR
Trans Voltage Suppressor Diode, 15000W, 130V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC PACKAGE-1
MICROSEMI
MSPPLAD15KP130E3TR
Trans Voltage Suppressor Diode, 15000W, 130V V(RWM), Unidirectional, 1 Element, Silicon, ROHS COMPLIANT, PLASTIC PACKAGE-1
MICROSEMI
MSPPLAD15KP13A
Trans Voltage Suppressor Diode, 15000W, 13V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC PACKAGE-1
MICROSEMI
MSPPLAD15KP13CA
Trans Voltage Suppressor Diode, 15000W, 13V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC PACKAGE-1
MICROSEMI
MSPPLAD15KP13CAE3
Trans Voltage Suppressor Diode, 15000W, 13V V(RWM), Bidirectional, 1 Element, Silicon, ROHS COMPLIANT, PLASTIC PACKAGE-1
MICROSEMI
MSPPLAD15KP13CAE3TR
Trans Voltage Suppressor Diode, 15000W, 13V V(RWM), Bidirectional, 1 Element, Silicon, ROHS COMPLIANT, PLASTIC PACKAGE-1
MICROSEMI
MSPPLAD15KP13CATR
Trans Voltage Suppressor Diode, 15000W, 13V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC PACKAGE-1
MICROSEMI
©2020 ICPDF网 联系我们和版权申明